Loss Analysis of High-Efficiency Perovskite/Si Tandem Solar Cells for Large Market Applications

The Si tandem solar cells composes of III-V, II-VI, chalcogenide and perovskite top cells and Si bottom cells are very attractive for creation of new markets. The perovskite/Si tandem solar cells are thought to be one of the most promising PV devices because of high-efficiency and low-cost potential. However, efficiencies of perovskite/Si tandem solar cells with an efficiency of 29.8% are lower compared to 39.5% with III-V 3-junction tandem solar cells and 35.9% with III-V/Si 3-junction tandem solar cells. Therefore, it is necessary to clarify and reduce several losses of perovskite/Si tandem solar cells. This paper presents high efficiency potential of perovskite/Si tandem solar cells analyzed by using our analytical procedure and discusses about non-radiative recombination, optical and resistance losses in those tandem solar cells. The perovskite/Si 2-junction tandem solar cells is shown to have efficiency potential of 37.4% as a result of non-radiative recombination loss of 2.3%, optical loss of 2.7% and resistance loss of 3.1%. Although the perovskite/Si 3-junction tandem solar cells are thought to be very attractive because of higher efficiency with an efficiency of more than 42%, decreasing non-radiative recombination loss in wide bandgap perovskite solar cell materials is pointed out to be necessary.

Loss Analysis of Electromagnetic Linear Actuator Coupling Control Electromagnetic Mechanical System

As an energy converter,electromagnetic linear actuators(EMLAs)have been widely used in industries.Multidisciplinary methodology is a preferred tool for the design and optimization of EMLA.In this paper,a multidisciplinary method was proposed for revealing the influence mechanism of load on EMLA’s loss.The motion trajectory of EMLA is planned through tracking differentiator,an adaptive robust control was adopted to compensate the influence of load on motion trajectory.A control-electromagnetic-mechanical coupling model was established and verified experimentally.The influence laws of load change on EMLA’s loss,loss composition and loss distribution were analyzed quantitatively.The results show that the data error of experiment,and simulation result of input energy,mechanical work,and iron loss is less than 3%.The iron loss accounts for less than 54.9%of the total loss under no-load condition,while the iron loss increases with the increase of load.For iron loss distribution,only the percentage of inner yoke keeps increasing with the increase of load.The composition and distribution of loss are the basis of thermal analysis and design.

Performance-Economic and Energy Loss Analysis of 80 KWp Grid Connected Roof Top Transformer Less Photovoltaic Power Plant

In India most part receives 4 - 7 kWh of solar radiation per square meter per day with 200 - 250 sunny days in a year. Tamilnadu state also receives the highest annual radiation in India. In this paper, the grid connected photovoltaic plant has a peak power of 80 KWp supplies electricity requirement of GRT IET campus during day time (7 hrs) and reduces load demand and generates useful data for future implementation of such PV plant projects in the Tamilnadu region. Photovoltaic plant was installed in April 2015, monitored during 6 months, and the performance ratio and the various power losses (power electronics, temperature, soiling, internal, network, grid availability and interconnection) were calculated. The PV plant supplied 64,182.86 KWh to the grid from April to September 2015, ranging from 11,510.900 to 10,200.9 kWh. The final yield ranged from 143.886 (h/d) to 127.51 (y/d), reference yield ranged from 201.6 (h/d) to 155.31 (h/d) and performance ratio ranged from 71.3% to 82.1%, for a duration of six months, it had given a performance ratio of 83.82%, system efficiency was 4.16% and the capacity factor of GRT IET Campus for six months was 18.26%. Payback period in years = 9 years 4 months, energy saving per year = 204,400 KWh, cost reduction per year = 1,737,400, Indian rupee = 26,197.30 USD and total CO2 reductions per year = 102,200 tons CO2/year.

A Discrete State Event Driven Simulation based Losses Analysis for Multi-terminal Megawatt Power Electronic Transformer

At present,power electronic transformers(PETs)have been widely used in power systems.With the increase of PET capacity to the megawatt level.the problem of increased losses need to be taken seriously.As an important indicator of power electronic device designing,losses have always been the focus of attention.At present,the losses are generally measured through experiments,but it takes a lot of time and is difficult to quantitatively analyze the internal distribution of PET losses.To solve the above problems,this article first qualitatively analyzes the losses of power electronic devices and proposes a loss calculation method based on pure simulation.This method uses the Discrete State Event Driven(DSED)modeling method to solve the problem of slow simulation speed of large-capacity power electronic devices and uses a loss calculation method that considers the operating conditions of the device to improve the calculation accuracy.For the PET prototype in this article,a losses model of the PET is established.The comparison of experimental and simulation results verifies the feasibility of the losses model.Then the losses composition of PET was analyzed to provide reference opinions for actual operation.It can help pre-analyze the losses distribution of PET,thereby providing a potential method for improving system efficiency.

Analysis of Long-Range Transmission Loss in the West Pacific Ocean

A long-range sound propagation experiment was conducted in the West Pacific Ocean in July 2013. Linear frequency-modulated signals with a frequency band of 260-360Hz were transmitted by a transducer hung on a floating ship during the experiment and were received by a horizontal line array towed by another ship sailing away from the transducer. The maximum distance between the two ships was 1029km. Signals were received at the distances 34-220 kin, 612-635 km and 926-1029 kin. Transmission loss versus distance between source and receiver was obtained and compared with the theoretical results predicted by the parabolic equation method program RAM. It is shown that RAM is adequate for estimating the transmission loss for distances up to 1029km. When the water depth is larger than the surface conjugate depth, the ocean bottom rarely influences the transmission loss in the convergence zones. However, in the opposite situation, the ocean bottom contributes significantly to the transmission loss.

Determination of basal ileal endogenous losses and standardized ileal digestibility of amino acids in barley fed to growing pigs

Background： Basal ileal endogenous amino acid（AA） losses（IAAend） and standardized ileal digestibility（SID） values of cereal grains, such as barley, are apparently underestimated when determined according to the nitrogen（N）-free method. Regression analysis between the dietary apparent ileal digestible content（c AID） and total crude protein（CP） and AA can be considered as alternative approach to obtain more accurate values for IAAendand SID of AA in cereal grains.Methods： Eight hulled barley genotypes were used, with barley being the only source of CP and AA in the assay diets. The diets contained 95 % as-fed of these eight barley genotypes each, ranging in CP content between 109.1 and 123.8 g/kg dry matter（DM）. Nine ileally T-cannulated barrows, average body weight（BW） 30 ± 2 kg, were allotted to a row-column design comprising eight periods with 6 d each and nine pigs. On d 5 and the night of d 6 of every period, ileal digesta were collected for a total of 12 h. The IAAend and the SID were determined by linear regression analysis between c AID and total dietary CP and AA.Results： There exist linear relationships between cA ID and total CP and AA（P 〈 0.001）. The IAAend of CP, Lys, Met, Thr and Trp amounted to 35.34, 1.08, 0.25, 1.02 and 0.38 g/kg DM intake（DMI）, respectively, which are greater compared to average IAAend determined previously under N-free feeding conditions. The SID of CP, Lys, Met, Thr and Trp was 90,79, 85, 79 and 86 %, respectively, and was greater when compared to tabulated values. Moreover, these SID values were greater than those reported in literature, based on correction of apparent ileal digestibility（AID） of CP and AA for their IAAendvalues. Summarized, the results of the present regression analysis indicate greater IAAendin barley-based diets compared to those obtained by N-free feeding.Conclusions： For low-protein feed ingredients like barley the regression method may be preferred over correction of AID values for their IAAenddetermined under N-free feeding conditions, as intercepts and slopes of the linear regression equations between cA ID and total dietary CP and AA provide direct estimates of IAAendand SID of CP and AA in the presence of the assay feed ingredient.

Numerical study of mono-crystalline silicon solar cells with passivated emitter and rear contact configuration for the efficiency beyond 24% based on mass production technology

Mono-crystalline silicon solar cells with a passivated emitter rear contact(PERC)configuration have attracted extensive attention from both industry and scientific communities.A record efficiency of 24.06%on p-type silicon wafer and mass production efficiency around 22%have been demonstrated,mainly due to its superior rear side passivation.In this work,the PERC solar cells with a p-type silicon wafer were numerically studied in terms of the surface passivation,quality of silicon wafer and metal electrodes.A rational way to achieve a 24%mass-production efficiency was proposed.Free energy loss analyses were adopted to address the loss sources with respect to the limit efficiency of 29%,which provides a guideline for the design and manufacture of a high-efficiency PERC solar cell.

Experimental Evaluation of Medium-Voltage Cascode Gallium Nitride(GaN)Devices for Bidirectional DC-DC Converters

Wide bandgap(WBG)semiconductors,such as silicon carbide(SiC)and gallium nitride(GaN),exhibit superior physical properties and demonstrate great potential for replacing conventional silicon(Si)semiconductors with WBG technology,pushing the boundaries of power devices to handle higher blocking voltages,switching frequencies,output power levels,and operating temperatures.However,tradeoffs in switching performance and converter efficiency when substituting GaN devices for Si and SiC counterparts are not well-defined,especially in a cascode configuration.Additional research with further detailed investigation and analysis is necessitated for medium-voltage GaN devices in power converter applications.Therefore,the aim of this research is to experimentally investigate the impact of emerging 650/900 V cascode GaN devices on bidirectional dc-dc converters that are suitable for energy storage and distributed renewable energy systems.Dynamic characteristics of Si,SiC,and cascode GaN power devices are examined through the double-pulse test(DPT)circuit at different gate resistance values,device currents,and DC bus voltages.Furthermore,the switching behavior and energy loss as well as the rate of voltage and current changes over the time are studied and analyzed at various operating conditions.A 500 W experimental converter prototype is implemented to validate the benefits of cascode GaN devices on the converter operation and performance.Comprehensive analysis of the power losses and efficiency improvements for Si-based,SiC-based,and GaN-based converters are performed and evaluated as the switching frequency,working temperature,and output power level are in-creased.The experimental results reveal significant improvements in switching performance and energy efficiency from the emerging cascode GaN devices in the bidirectional converters.

Design Optimization of Boiler Tail Flue in Supercritical Carbon Dioxide Power Generation System

The S-CO_(2) top-bottom combined cycle based on overlap energy utilization can lead to excessive heating area,due to the small temperature difference and the large thermal load for the heating surface at the tail of the boiler.Therefore,reasonable optimization indexes are needed for design optimization.Common optimization indexes include heating area and working medium pressure drop,but lower working medium pressure drop usually leads to large heating area,for example,with the increase of tube inner diameter or boiler width,the pressure drop decreases but the heating area increases.Thus,if both are used as optimization indexes,it will be difficult to choose the optimum tube inner diameter and boiler width.In this paper,exergy loss analysis is used,in combination with economic analysis,the optimization index is unified to the cost per unit heat transfer of the heating surface.The thermal calculation and pressure drop calculation models are established for the heating surface at the tail of the boiler.The optimized heating surface can greatly improve the economic benefit.

Coupled Electromagnetic-thermal Analysis of Segmented PM Consequent Pole Flux Switching Machine

Compact stator structure of flux switching machines(FSMs)encompassing both permanent magnets(PMs)and armature winding slots(AWS)attract research interest whenever high power and density are the basic requirements.However,it also results in temperature rises owing to heat generation by electromagnetic power losses degrading the electromagnetic performance and affecting machine performance.In this study,a segmented permanent magnet(SPM)consequent pole FSM(SPM-CPFSM)is developed,which provides a stator cooling channel(duct)for improved heat dissipation to avoid demagnetization of PM as well as overheating.Furthermore,this study investigates detailed electromagnetic performance analysis and prediction of temperature variation in various machine parts owing to the heat generated by iron,copper,and magnet eddy current losses utilizing coupled electromagnetic-thermal analysis accounting for magnetic flux density variation.In comparison with the 2D analysis,the developed 3D coupled-field analysis more accurately predicts electromagnetic performance and temperature distribution.Analysis reveals that a cooling duct at the stator significantly assists in stator heat dissipation in the axial direction ensuring a safe operating condition of the PMs as well as machine parts to avoid overheating.

Landslide Loss and Damage in Sindhupalchok District, Nepal:Comparing Income Groups with Implications for Compensation and Relief

The 2014 Jure landslide in Sindhupalchok District, Nepal, caused significant loss and damage to ecosystems and livelihoods in the area. In the direct aftermath of the landslide, several disaster loss assessments were conducted, with the aim of counting casualties,injured people, and damaged houses and infrastructure.Although useful and necessary in their own right, such rapid assessments do not reveal the true extent and significance of the losses and damages that people in disaster areas face, including their monetary value. We address this gap, based on a comprehensive household survey(N = 234), as well as other, qualitative research tools. Our results highlight the importance of differentiating between loss and damage in absolute monetary terms as opposed to losses relative to annual income. We find a stark contrast between the high absolute losses incurred by nonpoor households, and the high relative losses—up to 14 times their annual income—experienced by poor households.These results have important implications for policy that addresses loss and damage, not only of landslides but also of other disasters. Loss and damage assessments need to take the livelihood characteristics of affected households into account to identify and support those most in need of compensation and relief.

Characteristics of motorized spindle supported by active magnetic bearings

A motorized spindle supported by active magnetic bearings（AMBs） is generally used for ultra-high-speed machining. Iron loss of radial AMB is very great owing to high rotation speed, and it will cause severe thermal deformation. The problem is particularly serious on the occasion of large power application, such as all electric aero-engine. In this study, a prototype motorized spindle supported by five degree-of-freedom AMBs is developed. Homopolar and heteropolar AMBs are independently adopted as radial bearings. The influences of the two types of radial AMBs on the dynamic characteristics of the motorized spindle are comparatively investigated by theoretical analysis, test modal analysis and actual operation of the system. The iron loss of the two types of radial AMBs is analyzed by finite element software and verified through run-down experiments of the system. The results show that the structures of AMB have less influence on the dynamic characteristics of the motorized spindle. However, the homopolar structure can effectively reduce the iron loss of the radial AMB and it is useful for improving the overall performance of the motorized spindle.

A novel circuit architecture for fourth subharmonic mixers

A circuit topology for high-order subharmonic（SH） mixers is described.By phase cancellation of idle frequency components,the SH mixer circuit can eliminate the complicated design procedure of idle frequency circuits.Similarly,the SH mixer circuit can achieve a high port isolation by phase cancellation of the leakage LO, RF and idle frequency signals.Based on the high-order SH mixer architecture,a new Ka-band fourth SH mixer is analyzed and designed,it shows the lowest measured conversion loss of 8.3 dB at 38.4 GHz and the loss is lower than 10.3 dB in 34-39 GHz.Measured LO-IF,RF-LO,RF-IF port isolation are better than 30.7 dB,22.9dB and 46.5 dB,respectively.