Unified Hydrodynamics and Pseudorapidity Distributions of Charged Particles Produced in Heavy Ion Collisions at Low Energies at RHIC

In the context of unified hydrodynamics, we discuss the pseudorapidity distributions of the charged particles produced in Au-Au and Cu-Cu collisions at the low RHIC energies of √SNN = 19.6 and 22.4 GeV, respectively. It is found that the unified hydrodynamics alone can give a good description to the experimental measurements. This is different from the collisions at the maximum RHIC energy of √SNN = 200 GeV or at LHC energy of √SNN= 2.76 TeV, in which the leading particles must be taken into account so that we can properly explain the experimental observations.

The study of intelligent algorithm in particle identification of heavy-ion collisions at low and intermediate energies

Traditional particle identification methods face timeconsuming,experience-dependent,and poor repeatability challenges in heavy-ion collisions at low and intermediate energies.Researchers urgently need solutions to the dilemma of traditional particle identification methods.This study explores the possibility of applying intelligent learning algorithms to the particle identification of heavy-ion collisions at low and intermediate energies.Multiple intelligent algorithms,including XgBoost and TabNet,were selected to test datasets from the neutron ion multi-detector for reaction-oriented dynamics(NIMROD-ISiS)and Geant4 simulation.Tree-based machine learning algorithms and deep learning algorithms e.g.TabNet show excellent performance and generalization ability.Adding additional data features besides energy deposition can improve the algorithm’s performance when the data distribution is nonuniform.Intelligent learning algorithms can be applied to solve the particle identification problem in heavy-ion collisions at low and intermediate energies.

An ionic liquid-assisted strategy for enhanced anticorrosion of low-energy PEO coatings on magnesium–lithium alloy

A low-energy plasma electrolytic oxidation(LePEO)technique is developed to simultaneously improve energy efficiency and anti-corrosion.Ionic liquids(1-butyl-3-methylimidazole tetrafluoroborate(BmimBF_(4)))as sustainable corrosion inhibitors are chosen to investigate the corrosion inhibition behavior of ionic liquid(ILs)during the LePEO process for LA91 magnesium-lithium(Mg-Li)alloy.Results show that the ionic liquid BmimBF_(4)participates in the LePEO coating formation process,causing an increment in coating thickness and surface roughness.The low conductivity of the ionic liquid is responsible for the voltage and breakdown voltage increases during the LePEO with IL process(LePEO-IL).After adding BmimBF_(4),corrosion current density decreases from 1.159×10^(−4)A·cm^(−2)to 8.143×10^(−6)A·cm^(−2).The impedance modulus increases to 1.048×10^(4)Ω·cm^(−2)and neutral salt spray remains intact for 24 h.The superior corrosion resistance of the LePEO coating assisted by ionic liquid could be mainly attributed to its compact and thick barrier layer and physical absorption of ionic liquid.The ionic liquid-assisted LePEO technique provides a promising approach to reducing energy consumption and improving film performance.

Performance of pulsed plasma thruster at low discharge energy

As the size of satellites scales down, low-power and compact propulsion systems such as the pulsed plasma thruster(PPT) are needed for stabilizing these miniature satellites in orbit. Most PPT systems are operated at 2 J or more of discharge energy. In this work, the performance of a PPT with a side-fed, tongue-flared electrode configuration operated within a lower discharge energy range of 0.5-2.5 J has been investigated. Ablation and charring of the polytetrafluoroethylene propellant surface were analyzed through field-effect scanning electron microscopy imaging and energy-dispersive X-ray spectroscopy. When the discharge energy fell below 2 J, inconsistencies occurred in the specific impulse and the thrust efficiency due to the measurement of the low mass bit. At energy ≥2 J, the performance parameters are compared with other PPT systems of similar configuration and discussed in depth.

Measurement of astrophysical S-factor for ^(9)Be(d, α_(0))^(7)Li and ^(9)Be(d, α_(1))^(7)Li^(*) reactions at low energies

The thick-target yield of the ^(9)Be(d,α0)7Li and ^(9)Be(d,α1)7Li*reactions has been first directly measured over deuteron energies from 66 to 94 keV.The obtained S(Ei)ofα0 andα1 have similar trends calculated by the thin-target yield,consistent with Yan’s report within the errors.Furthermore,the parametric expression of S(E)was obtained to calculate the theoretical thick target yield,and it roughly agrees with the experimental thick target yield.

Process reconfiguration and intensification:An emerging opportunity enabling efficient carbon capture and low-cost blue hydrogen production

Low-carbon hydrogen can play a significant role in decarbonizing the world. Hydrogen is currently mainly produced from fossil sources,requiring additional CO_(2)capture to decarbonize, which energy intense and costly. In a recent Green Energy & Environment paper, Cheng and Di et al. proposed a novel integration process referred to as SECLR_(HC) to generate high-purity H_(2) by in-situ separation of H_(2)and CO without using any additional separation unit. Theoretically, the proposed process can essentially achieve the separation of C and H in gaseous fuel via a reconfigured reaction process, and thus attaining high-purity hydrogen of ~99%, as well as good carbon and hydrogen utilization rates and economic feasibility. It displays an optimistic prospect that industrial decarbonization is not necessarily expensive, as long as a suitable CCS measure can be integrated into the industrial manufacturing process.

Study on Geological Genesis and Sedimentary Model of Complex Low Resistivity Reservoir in Offshore Oilfield — A Case of NgIII Formation of X Oilfield in Bohai Sea

In order to study the micro genetic mechanism and main geological controlling factors of low resistivity reservoir in NgIII formation of X oilfield in Bohai sea in China, the clay mineral composition, irreducible water saturation, salinity and conductive minerals of low resistivity reservoir were studied by using the data of core, cast thin section and analysis, and compared with normal resistivity reservoir. At the same time, the control effect of sedimentary environment on low resistivity reservoir was discussed. The results show that the additional conductivity of high bound water content and high montmorillonite content in the reservoir together leads to the significant reduction of reservoir resistivity, which is the main microscopic cause of the formation of low resistance, and is mainly controlled by the sedimentary background such as paleoclimate and sedimentary cycle. During the deposition period of NgIII formation, the paleoclimate was dry and cold, and it was at the end of the water advance of the medium-term sedimentary cycle. The hydrodynamic force of the river channel was weak, the carrying capacity of the riverbed was weak, and the river channel swayed frequently, resulting in fine lithologic particle size, high shale content and complex pore structure of the reservoir, resulting in significant reduction of reservoir resistance. The research conclusion would have strong guiding significance for the development of low resistivity reservoirs in this area.

Thermal Experience in an Era of Low Exergy Domestic Heating Systems

Existing theories of thermal comfort are largely blind to the way heat is delivered to spaces.Field studies,however,show that people create and enjoy thermal conditions that lie outside conventional definitions of comfort-the thermal experience itself is valued-some of which are tied to particular ways of delivering heat.The concept“exergy”can be used to describe the quality of heat energy and its ability to provide warmth.A shift from fossil fuels towards renewable sources heralds a new era of space heating consisting mainly of low exergy sources,such as heat pumps.This marks a major turning point in the history of domestic heating.This paper begins by discussing variations in domestic thermal environments before considering new forms of low carbon heating.Later sections analyse the way in which these systems deliver heat within people’s homes and consider the implications for thermal experience,comfort and energy consumption.

Multi-effect distillation system for seawater desalination driven by tidal energy and low grade energy

A multi-effect distillation technology for seawater desalination driven by tidal energy and low grade energy is presented.In the system,tidal energy is utilized to supply power instead of coventional electric pumps during the operation,resulting in the decrease of dependence on steady electric power supply and a reduction in the running costs.According to the technological principle,a testing unit is designed and built.The effects of the feed seawater temperature and the heat source temperature on the unit performance are tested and analyzed.The experimental results show that the fresh water output is 27 kg/h when the heating water temperature is 65 ℃ and the absolute pressure is 25 kPa.The experimental and theoretical analysis results indicate that the appropriate heating water temperature is a key factor in ensuring the steady operation of the system.

Noninvasive beam diagnosis based on the TM_(010)mode

A resonant cavity based on the TM_(010)mode is an effective tool for noninvasive beam characterization. This technique has the advantages of a high signal-to-noise ratio, compact structure, and is related to multiple parameters compared with other beam monitors. In this study, high-precision measurements of the bunch charge, arrival time, bunch length, and energy parameters based on the TM_(010)mode are discussed. A cavity beam arrival time monitor(BAM) utilizing a phase cavity has been widely used in many facilities. Regarding bunch-length measurements, the influence of the beam energy, beam offset,and longitudinal spectrum on the TM_(010)mode are carefully considered to reduce errors, and the theoretical resolution of two cavities with different frequencies is analyzed. Owing to the dependence of the beam velocity of the beam loss factor, this method can also be used for the detection low beam energy using two cavities with the same frequency but different cavity lengths. A set of three cavities with different lengths and frequencies of 1.902 and 11.424 GHz is presented for measuring the four aforementioned parameters.

Nano-Ni-Induced Electronic Modulation of MoS_(2) Nanosheets Enables Energy-Saving H_(2) Production and Sulfide Degradation

Electrocatalytic hydrogen evolution and sulfion(S^(2-))recycling are promising strategies for boosting H_(2)production and removing environmental pollutants.Here,a nano-Ni-functionalized molybdenum disulfide(MoS_(2))nanosheet was assembled on steel mesh(Ni-MoS_(2)/SM)for use in sulfide oxidation reaction-assisted,energy-saving H_(2)production.Experimental and theoretical calculation results revealed that anchoring nano-Ni on high-surface-area slack MoS_(2)nanosheets not only optimized catalyst adsorption of polysulfides but also played an important role in promoting hydrogen evolution reaction kinetics by absorbing OH_(ad),thereby greatly enhancing the catalytic performance toward sulfide oxidation reaction and hydrogen evolution reaction.Meanwhile,the Ni/MoS^(2-)based hydrogen evolution reaction+sulfide oxidation reaction system achieved nearly 100%hydrogen production efficiency and only consumed 61%less power per kWh than the oxygen evolution reaction+hydrogen evolution reaction system,which suggested our proposed Ni-MoS_(2)and novel hydrogen production system are promising for sustainable energy production.

Accelerated Particle Swarm Optimization Algorithm for Efficient Cluster Head Selection in WSN

Numerous wireless networks have emerged that can be used for short communication ranges where the infrastructure-based networks may fail because of their installation and cost.One of them is a sensor network with embedded sensors working as the primary nodes,termed Wireless Sensor Networks(WSNs),in which numerous sensors are connected to at least one Base Station(BS).These sensors gather information from the environment and transmit it to a BS or gathering location.WSNs have several challenges,including throughput,energy usage,and network lifetime concerns.Different strategies have been applied to get over these restrictions.Clustering may,therefore,be thought of as the best way to solve such issues.Consequently,it is crucial to analyze effective Cluster Head(CH)selection to maximize efficiency throughput,extend the network lifetime,and minimize energy consumption.This paper proposed an Accelerated Particle Swarm Optimization(APSO)algorithm based on the Low Energy Adaptive Clustering Hierarchy(LEACH),Neighboring Based Energy Efficient Routing(NBEER),Cooperative Energy Efficient Routing(CEER),and Cooperative Relay Neighboring Based Energy Efficient Routing(CR-NBEER)techniques.With the help of APSO in the implementation of the WSN,the main methodology of this article has taken place.The simulation findings in this study demonstrated that the suggested approach uses less energy,with respective energy consumption ranges of 0.1441 to 0.013 for 5 CH,1.003 to 0.0521 for 10 CH,and 0.1734 to 0.0911 for 15 CH.The sending packets ratio was also raised for all three CH selection scenarios,increasing from 659 to 1730.The number of dead nodes likewise dropped for the given combination,falling between 71 and 66.The network lifetime was deemed to have risen based on the results found.A hybrid with a few valuable parameters can further improve the suggested APSO-based protocol.Similar to underwater,WSN can make use of the proposed protocol.The overall results have been evaluated and compared with the existing approaches of sensor networks.

Effective data transmission through energy-efficient clustering and Fuzzy-Based IDS routing approach in WSNs

Wireless sensor networks(WSN)gather information and sense information samples in a certain region and communicate these readings to a base station(BS).Energy efficiency is considered a major design issue in the WSNs,and can be addressed using clustering and routing techniques.Information is sent from the source to the BS via routing procedures.However,these routing protocols must ensure that packets are delivered securely,guaranteeing that neither adversaries nor unauthentic individuals have access to the sent information.Secure data transfer is intended to protect the data from illegal access,damage,or disruption.Thus,in the proposed model,secure data transmission is developed in an energy-effective manner.A low-energy adaptive clustering hierarchy(LEACH)is developed to efficiently transfer the data.For the intrusion detection systems(IDS),Fuzzy logic and artificial neural networks(ANNs)are proposed.Initially,the nodes were randomly placed in the network and initialized to gather information.To ensure fair energy dissipation between the nodes,LEACH randomly chooses cluster heads(CHs)and allocates this role to the various nodes based on a round-robin management mechanism.The intrusion-detection procedure was then utilized to determine whether intruders were present in the network.Within the WSN,a Fuzzy interference rule was utilized to distinguish the malicious nodes from legal nodes.Subsequently,an ANN was employed to distinguish the harmful nodes from suspicious nodes.The effectiveness of the proposed approach was validated using metrics that attained 97%accuracy,97%specificity,and 97%sensitivity of 95%.Thus,it was proved that the LEACH and Fuzzy-based IDS approaches are the best choices for securing data transmission in an energy-efficient manner.

Industrialization,Efficiency and Social Housing:Sustainable Prefabrication for the Colombian Social and Cultural Context

This research aims to generate processes of industrialization and qualification of social housing in Colombia through prefabrication,low energy consumption and high environmental quality to reduce the current deficit and improve the quality of life in communities with fewer economic resources.Modular coordination and the use of materials with thermal behaviors,appropriate to the country’s climatic characteristics,reduce production costs,avoid waste and improve the architectural and environmental quality of social housing.Passive cooling strategies,such as controlling solar incursion and generating natural cross ventilation eliminate energy consumption and allow reaching desired standards of comfort.In a context in which traditional construction systems have still not resolved the social housing deficit in Colombia and which generate high costs for energy consumption in the search for thermal comfort,industrialized and efficient construction with high environmental quality provides solutions according to the economic,geographic,social and cultural context in Colombia.

A Compact Low Energy Electron Microscope for Surface Analysis

The description and function characterization of a flange-on type low energy electron mi- croscope are given. In this microscope a magnetic beam separator with 10° deflection angle is used in order to facilitate compacting the instrument on a single 10 in. flange. Mean- while some correcting elements in the electron optical system are simplified to reduce the complexities of construction and operation. The sample is set close to ground potential, so that all the electrostatic lenses are easily to float at high voltages. The performance of the microscope in typical low energy electron microscopy, low energy electron diffraction and photoemission electron microscopy modes is demonstrated through several experiments. A lateral resolution of 51 nm is estimated for low energy electron microscopy imaging. With femtosecond laser as light source, the consequent nonlinear photoemission makes this micro-scope also suitable for the observation of optical near field phenomena and a lateral resolution of 110 nm is obtained.

Growth behaviour of low-energy plasma electrolytic oxidation coatings on a magnesium alloy

Plasma electrolytic oxidation(PEO),a promising surface treatment method to improve the corrosion and wear resistance of magnesium and its alloys,operates at high voltages,resulting in a relatively high energy cost.To make the PEO process more economically viable,its energy efficiency needs to be improved.This study investigates the growth behaviour and microstructural characteristics of low-energy PEO coatings on an AM50 magnesium alloy in a concentrated electrolyte containing sodium tetraborate.The surface morphology of the coatings was different from typical PEO coating morphologies and a large voltage oscillation was observed during treatment.Using different characterisation techniques,and based on a micro-discharge model,a correlation was made between the voltage-time behaviour,microdischarge characteristics and the composition and microstructure of the coated samples.The results suggest electrolyte chemistry can somewhat control discharge behaviour,which plays an important role in PEO coating growth.

Genetic Transformation of Watermelon with Pumpkin DNA by Low Energy Ion Beam-mediated Introduction

The No.601 watermelon (citrullus lanatus) seeds were treated with 25 keV N+ implantation at the dosage of 7.8 ×1016 ions/cm2. After treatment, watermelon seeds were incubated with 380μg/μl pumpkin (Cucubita, maxima Duch) DNA solution at 35 ℃ for 5 hours. By two-generations of selection and resistance screening at seedling stage, one transformed material was selected out, whose rind color is similar to that of the donor pumpkin and whose size of seeds is between that of the donor and the receptor. Using AFLP (amplified fragment length polymorphism) technique, two polymorphic DNA fragments were amplified. This primarily testified that the donor DNA fragments/gene were introduced into the receptor cell and integrated into the genomic DNA of the receptor.

Preliminary Studies on Base Substitutions and Repair of DNA Mismatch Damage Stimulated by Low Energy N^+ Ion Beam Implantation in Escherichia coli

Ever since the low energy N+ ion beam has been accepted that the mutation effects of ionizing radiation are attributed mainly to direct or indirect damage to DNA. Evidences based on naked DNA irradiation in support of a mutation spectrum appears to be consistent, but direct proof of such results in vivo are limited. Using mutS, dam and/or dcm defective Eschericha coli imitator strains, an preliminary experimental system on induction of in vivo mutation spectra of low energy N+ ion beam has been established in this study. It was observed that the mutation rates of rifampicin resistance induced by N+ implantation were quite high, ranging from 9.2 x 10~8 to 4.9× 10~5 at the dosage of 5.2×1014 ions/cm2. Strains all had more than 90-fold higher mutation rate than its spontaneous mutation rate determined by this method. It reveals that base substitutions involve in induction of mutation of low energy nitrogen ion beam implantation. The mutation rates of mutator strains were nearly 500-fold (GM2929), 400-fold (GM5864) and 6-fold larger than that of AB1157. The GM2929 and GM5864 both lose the ability of repair DNA mismatch damage by virtue of both dam and dcm pathways defective (GM2929) or failing to assemble the repair complex (GM5864) respectively. It may explain the both strains had a similar higher mutation rate than GM124 did. It indicated that DNA cytosine methylase might play an important role in mismatch repair of DNA damage induced by N+ implantation. The further related research were also discussed.

Study of Biological Effects of Low Energy Ion Implantation on Tomato and Radish Breeding

Biological effects of 30 keV low energy nitrogen ion implantation on the seeds of five types of tomato and one type of radish were investigated. Results showed that low energy ions have different effects on different vegetables. The whole dose-response curve of the germination ratio did not take on ＂the shape of saddle＂, but was a rising and falling waveform with the increase or decrease in ion implantation. In the vegetable of Solanaceae, two outstanding aberrant plants were selected from M1 of Henan No.4 tomato at a dose of 7x 1017 nitrogen ions/cm2, which had thin-leaves, long-petal and nipple tip fruit stably inherited to Mr. Furthermore the analysis of the isozyme showed that the activity of the mutant tomato seedling was distinct in quantity and color. In Raphanus sativus L., the aberrances were obvious in the mutant of radish 791 at a dose of 5×10^17 nitrogen ions/cm^2, and the weight of succulent root and the volume of growth were over twice the control＇s. At present, many species for breeding have been identified in the field and only stable species have been selected for the experiment of production. It is evident that the low energy ion implantation technology has clear effects on vegetables＇ genetic improvement.

Bioeffects of Low Energy Ion Beam Implantation:DNA Damage,Mutation and Gene Transter

Low-energy ion beam implantation （10 - 200 keV） has been proved to have a wide range of biological effects and is broadly used in the breeding of crops and micro-organisms.To understand its mechanisms better and facilitate its applications, the developments in the bioeffects of low energy ion beam implantation in the past twenty years are summarized in this paper.