A novel salt-assisted low temperature solid state method using CoCl2.6H2O, FeCl3.6H2O and NaOH as precursor and using NaCI as a dispersant to synthesize high surface area CoFe2O4 nanoparticles, has been investigated. ...A novel salt-assisted low temperature solid state method using CoCl2.6H2O, FeCl3.6H2O and NaOH as precursor and using NaCI as a dispersant to synthesize high surface area CoFe2O4 nanoparticles, has been investigated. The effects of the molar ratio of added salt and calcination temperature on the characteristics of the products were investigated by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, vibrating sample magnetometer （VSM） and Brunauer, Emmett and Teller （BET） surface area analysis. Results showed that the introduction of leachable inert inorganic salt as a hard agglomeration inhibitor in the mixture precursor led to the formation of high dispersive CoFe2O4 nanoparticles; and the increase in specific surface area from 28.28 to 73.97 m^2/g, and the saturation magnetization is 84.6 emu/g.展开更多
Nickel ferrite nano-powders were prepared by microwave radiating low-temperature solid-state reaction method, and then modified with Ag by dipping method. The crystal structure and morphology of the samples were chara...Nickel ferrite nano-powders were prepared by microwave radiating low-temperature solid-state reaction method, and then modified with Ag by dipping method. The crystal structure and morphology of the samples were characterized by means of X-ray diffraction（XRD）, scanning electron microscopy （SEM） and X-ray photoelectron spectroscopy （XPS）. The gas sensing properties of the samples were also investigated. The results reveal that the Ag, as amorphous structure, can efficiently prevent the reuniting and growing-up of nanosized NiFe2O4 grains, and 1.5% Ag modified NiFe2O4 sensor has a better sensitivity, up to 43, for acetone gas than 1.5%Ag mixed NiFe2O4 sensor prepared by low-temperature solid-state reaction, at an optimal working voltage of 4.5 V. The quick response time （1 s） and fast recovery time （～10 s） are the main characteristics of this sensor.展开更多
基金supported by the National Natural Sci-ence Foundation of China under grant No. 50602024the Youth Foundation of North University of China
文摘A novel salt-assisted low temperature solid state method using CoCl2.6H2O, FeCl3.6H2O and NaOH as precursor and using NaCI as a dispersant to synthesize high surface area CoFe2O4 nanoparticles, has been investigated. The effects of the molar ratio of added salt and calcination temperature on the characteristics of the products were investigated by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, vibrating sample magnetometer （VSM） and Brunauer, Emmett and Teller （BET） surface area analysis. Results showed that the introduction of leachable inert inorganic salt as a hard agglomeration inhibitor in the mixture precursor led to the formation of high dispersive CoFe2O4 nanoparticles; and the increase in specific surface area from 28.28 to 73.97 m^2/g, and the saturation magnetization is 84.6 emu/g.
基金Project (2006BS04035) supported by the Youth Scientific Research Foundation of Shandong Province, China
文摘Nickel ferrite nano-powders were prepared by microwave radiating low-temperature solid-state reaction method, and then modified with Ag by dipping method. The crystal structure and morphology of the samples were characterized by means of X-ray diffraction（XRD）, scanning electron microscopy （SEM） and X-ray photoelectron spectroscopy （XPS）. The gas sensing properties of the samples were also investigated. The results reveal that the Ag, as amorphous structure, can efficiently prevent the reuniting and growing-up of nanosized NiFe2O4 grains, and 1.5% Ag modified NiFe2O4 sensor has a better sensitivity, up to 43, for acetone gas than 1.5%Ag mixed NiFe2O4 sensor prepared by low-temperature solid-state reaction, at an optimal working voltage of 4.5 V. The quick response time （1 s） and fast recovery time （～10 s） are the main characteristics of this sensor.
