Massive amounts of low-grade tin middlings have been produced from tin tailings,in which arsenic and tin are worthy to be recycled.Owing to high sulfur content in these tin middlings,a novel self-sulfurization roastin...Massive amounts of low-grade tin middlings have been produced from tin tailings,in which arsenic and tin are worthy to be recycled.Owing to high sulfur content in these tin middlings,a novel self-sulfurization roasting was proposed to transform,separate and recover arsenic and tin in this research.There was no extra curing agent to be added,which decreased the formation of pollutant S-containing gas.The self-sulfurization process involved a two-stage roasting of reduction followed by sulfurization.First in reduction roasting,FeAsS decomposed to FeS and As and the As then transformed to As_(4)(g)and As_(4)S_(4)(g),via which the arsenic was separated and recovered.The arsenic content in the first residue could be decreased to 0.72 wt.%.Accompanied with it,the FeS was firstly oxidized to Fe_(1−x)S and then to SO_(2)(g)by the coexisted Fe_(2)O_(3),and finally reduced and combined with the independent Fe_(2)O_(3)to form Fe_(1−x)S.In the followed sulfurization roasting,the Fe_(1−x)S sulfurized SnO_(2)to SnS(g),due to which tin could be recovered and its content in the second residue decreased to 0.01 wt.%.This study provided an efficient method to separate and recover arsenic and tin from low-grade tin middlings.展开更多
BACKGROUND Low-grade appendiceal neoplasms(LAMN)are characterized by low incidence and atypical clinical presentations,often leading to misdiagnosis as acute or chronic appendicitis before surgery.The primary diagnost...BACKGROUND Low-grade appendiceal neoplasms(LAMN)are characterized by low incidence and atypical clinical presentations,often leading to misdiagnosis as acute or chronic appendicitis before surgery.The primary diagnostic tool for LAMN is abdominal computed tomography(CT)imaging.Surgical resection remains the cornerstone of LAMN management,necessitating en bloc tumor excision to minimize the risk of iatrogenic rupture.Laparoscopy,known for its minimal invasiveness,reduced postoperative discomfort,and expedited recovery,is a safe and reliable approach for LAMN treatment.Despite the possibility of pseudomyxoma peritonei development,appendectomy and partial appendectomy generally result in negative tumor margins and favorable outcomes,which can be attributed to the disease’s slow growth and lower malignancy.CASE SUMMARY A 71-year-old male patient was admitted to our hospital with a pelvic spaceoccupying lesion detected 1 mo prior.Physical examination showed a soft abdomen without tenderness or rebound and no palpable masses.No shifting dullness was noted,and digital rectal examination revealed no palpable mass.Enteroscopy revealed a raised,smooth-surfaced mass measuring 3.0 cm in the cecum.Abdominal contrast-enhanced CT showed a markedly thickened and dilated appendix with visible cystic shadows.Laparoscopic surgery was performed and revealed a significantly dilated appendix,leading to laparoscopic resection of the appendix and part of the cecum.Post-surgical pathologic analysis confirmed LAMN.The patient received symptomatic and supportive post-operative care and was discharged on postoperative day 4 without complications such as abdominal bleeding,intestinal obstruction,or incision infection.No tumor recurrence was observed during a 7-mo follow-up period.CONCLUSION LAMN is a rare disease that lacks specific clinical manifestations.Abdominal CT plays a crucial role in diagnosing LAMN,and laparoscopic surgery is a safe and effective diagnostic and therapeutic approach.展开更多
BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is an extremely rare tumor characterized by the malignant proliferation of myofibroblasts.LGMS most commonly develops in adults,predominantly in males,in the head and ...BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is an extremely rare tumor characterized by the malignant proliferation of myofibroblasts.LGMS most commonly develops in adults,predominantly in males,in the head and neck region,oral cavity,especially on the tongue,mandible,and larynx.This article presents 2 cases of LGMS localized to the maxillary sinus and provides an overview of the available literature.CASE SUMMARY Two patients with LGMS located in the maxillary sinus underwent surgery at the Department of Head and Neck Surgery.Case 1:A 46-year-old patient was admitted to the clinic with suspected LGMS recurrence in the right maxillary sinus(rT4aN0M0),with symptoms of pain in the suborbital area,watering of the right eye,thick discharge from the right nostril,and augmented facial asymmetry.After open biopsy-confirmed LGMS,the patient underwent expanded maxillectomy of the right side with immediate palate reconstruction using a microvascular skin flap harvested surgically from the middle arm.The patient qualified for adjuvant radiotherapy for the postoperative bed,with an additional margin.Currently,the patient is under 1.5 years of observation with no evidence of disease.Case 2:A 45-year-old man was admitted to our clinic with facial asymmetry,strabismus,exophthalmos,and visual impairment in the right eye.Six months earlier,the patient had undergone partial jaw resection at another hospital for fibromatosis.A contrast-enhanced computed tomography scan revealed a tumor mass in the postoperative log after an earlier procedure.An open biopsy confirmed lowgrade fibrosarcoma(rT4aN0M0).The patient qualified for an extended total right maxillectomy with orbital excision and right hemimandibulectomy with immediate microvascular reconstruction using an anterolateral thigh flap.The patient subsequently underwent adjuvant radiotherapy to the postoperative area.After 9 months,recurrence occurred in the right mandibular arch below the irradiated area.The lesion infiltrated the base of the skull,which warranted the withdrawal of radiotherapy and salvage surgery.The patient qualified for palliative chemotherapy with a regimen of doxorubicin+dacarbazine+cyclophosphamide and palliative radiotherapy for bone metastases.The patient died 26 months after surgical treatment.The cases have been assessed and compared with cases in the literature.CONCLUSION No specific diagnostic criteria or treatment strategies have been developed for LGMS.The treatment used for LGMS is the same as that used for sinonasal cancer radical tumor excision;adjuvant radiotherapy or chemoradiotherapy should also be considered.They have low malignant potential but are highly invasive,tend to recur,and metastasize to distant sites.Patients should undergo regular follow-up examinations to detect recurrence or metastasis at an early stage.Patients should be treated and observed at the highest referral centers.展开更多
The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. Ho...The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.展开更多
The unit-cell parameters and volumes of geikielite(MgTiO_(3))and ilmenite(FeTiO_(3))were investigated at high temperatures up to 700 K and ambient pressure,using in-situ angle-dispersive synchrotron X-ray diffraction....The unit-cell parameters and volumes of geikielite(MgTiO_(3))and ilmenite(FeTiO_(3))were investigated at high temperatures up to 700 K and ambient pressure,using in-situ angle-dispersive synchrotron X-ray diffraction.No phase transition was detected over the experimental temperature range.Using(Berman in J Petrol29:445-522,1988.10.1093/petrology/29.2.445)equations to fit the temperature-volume data,the volumetric thermal expansion coefficients at ambient conditions(α_(V0))of MgTiO_(3) and FeTiO_(3) were obtained as follows:2.55(6)×10^(-5)K^(-1)and 2.82(10)×10^(-5)K^(-1),respectively.We infer that the larger effective ionic radius of Fe^(2+)(Ⅵ)(0.78 A)than that of Mg^(2+)(Ⅵ)(0.72?)renders FeTiO_(3)has a larger volumetric thermal expansivity than MgTiO_(3).Simultaneously,the refined axial thermal expansion coefficients under ambient conditions areα_(a0)=0.74(3)×10^(-5)K^(-1)andα_(c0)=1.08(5)×10^(-5)K^(-1)for the aaxis and c-axis of MgTiO_(3),respectively,andα_(a0)=0.95(5)×10^(-5)K^(-1)andα_(c0)=0.92(12)×10^(-5)K^(-1)for the aaxis and c-axis of FeTiO_(3),respectively.The axial thermal expansivity of MgTiO_(3) is anisotropic,but that of FeTiO_(3) is nearly isotropic.We infer that the main reason for the different axial thermal expansivity between MgTiO_(3) and FeTiO_(3) is that the thermal expansion mode of the Mg-O bond in MgTiO_(3) is different from that of the Fe-O bonds in FeTiO_(3).展开更多
Thermal energy is abundantly available in our daily life and industrial production,and especially,low-grade heat is often regarded as a byproduct.Collecting and utilizing this ignored energy by low-cost and simple tec...Thermal energy is abundantly available in our daily life and industrial production,and especially,low-grade heat is often regarded as a byproduct.Collecting and utilizing this ignored energy by low-cost and simple technologies may become a smart countermeasure to relieve the energy crisis.Here,a unique device has been demonstrated to achieve high value-added conversion of low-grade heat by introducing redox-active organic alizarin(AZ)onto N-doped hollow carbon nanofibers(N–HCNF)surface.As-prepared N–HCNF/AZ can deliver a high specific capacitance of 514.3 F g^(-1)(at 1 A g^(-1))and an outstanding rate capability of 60.3%even at 50 A g^(-1).Meanwhile,the assembled symmetric proton capacitor can deliver a high energy density of 28.0 Wh kg^(-1) at 350.0 W kg^(-1) and a maximum power density of 35.0 kW kg^(-1) at 17.0 Wh kg^(-1).Significantly,the thermally chargeable proton capacitors can attain a surprisingly high Seebeck coefficient of 15.3 mV K^(-1) and a power factor of 6.02µW g^(-1).Taking advantage of such high performance,a satisfying open-circuit voltage of 481.0 mV with a temperature difference of 54 K is achieved.This research provides new insights into construction of high value-added energy systems requiring high electrochemical performances.展开更多
BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is a rare spindle cell sarcoma espe-cially in the pancreas,with myofibroblastic differentiation.Hitherto,only a few cases have been reported.CASE SUMMARY Herein,we rep...BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is a rare spindle cell sarcoma espe-cially in the pancreas,with myofibroblastic differentiation.Hitherto,only a few cases have been reported.CASE SUMMARY Herein,we report a case involving the discovery of a pancreatic mass detected during a routine physical examination.Subsequent imaging and pathological tests of the patient led to the diagnosis of LGMS of the pancreas.Following surgical intervention,the patient experienced recurrence and metastasis.Conventional treatment is not effective for postoperative recurrent pancreatic LGMS with multiple metastases.After communicating with the patients and their families,informed consent was obtained for the treatment of anlotinib combined with pembrolizumab.Evaluation of imaging and clinical symptoms post-treatment revealed a relatively favorable response to the combination of anlotinib and pembrolizumab.CONCLUSION Based on the comprehensive literature review,our report aimed to provide evidence for a better understanding of the disease characteristics,diagnostic criteria,imaging findings,and identification of LGMS.And explore novel treatment strategies for this disease.展开更多
The influence of surface dissolution on flotation separation of fine ilmenite from titanaugite was investigated through infrared spectroscopic (FT-IR) analysis and X-ray photoelectron spectroscopy (XPS) test. The ...The influence of surface dissolution on flotation separation of fine ilmenite from titanaugite was investigated through infrared spectroscopic (FT-IR) analysis and X-ray photoelectron spectroscopy (XPS) test. The results show that surface dissolution in weak acid solution is helpful to enlarge the floatability difference between ilmenite and titanaugite. In weak acidic solution, as sodium oleate mainly interacts with Fe which results in ilmenite flotation, and surface dissolution is beneficial to its oxidation, the floatability of ilmenite after surface dissolution is increased; meanwhile, sodium oleate interacts with Ca and Mg which results in titanangite flotation, and the quantities of Ca and Mg on the surface of titanautite are decreased due to the surface dissolution, so the floatability of titanaugite after surface dissolution is depressed. For an ilmenite ore obtained from Panzhihua with TiO2 grade of 8.41%, flotation after surface dissolution treatment could increase TiO2 grade of rough concentrate from 26.7% to 31.73 %.展开更多
The influence of microwave heating on the grinding of Panzhihua ilmenite ore was investigated. Factors that influence the processing are: the microwave exposure time, power density and sample mass. 40 g sample was mi...The influence of microwave heating on the grinding of Panzhihua ilmenite ore was investigated. Factors that influence the processing are: the microwave exposure time, power density and sample mass. 40 g sample was microwave heated for 30 s with 1 kW of microwave power and followed by water quenching. SEM analysis indicated that intergranular fractures occurred between ores and gangues other than transgranular fractures after microwave treatment, which would liberate minerals from each other effectively. The subsequently magnetic separation trials provided evidence that the recovery rate increased from 44% for raw ore to 72% by microwave treatment.展开更多
The microwave drying of ilmenite was investigated.The effects of power levels and sample mass on drying characteristics of moisture content,drying rate,moisture ratio were studied,with microwave power ranging from 119...The microwave drying of ilmenite was investigated.The effects of power levels and sample mass on drying characteristics of moisture content,drying rate,moisture ratio were studied,with microwave power ranging from 119 W to 700 W and sample mass from 5 g to 25 g.The drying processes were completed within 2-8 min at different conditions.The moisture content and drying rates are found to be dramatically affected by microwave power density.For all drying processes the prior microwave absorption of moisture produces an accelerating peak on the drying rate curves in the initial stage.For the sample mass of 25 g and power of 385 W,the drying kinetics were studied.The experimental results fit better to the Henderson-Pabis index model rather than the Page's semi-empirical model;the drying rate constant k is increased with the increase of microwave power and decrease of sample mass.展开更多
The oxidation process of low-grade vanadium slag in the presence of Na2CO3 was investigated by XRD,SEM/EDS and TG-DSC techniques.The results show that the vanadium slag is oxidized in a temperature range from 273 to 7...The oxidation process of low-grade vanadium slag in the presence of Na2CO3 was investigated by XRD,SEM/EDS and TG-DSC techniques.The results show that the vanadium slag is oxidized in a temperature range from 273 to 700 °C.Olivine phases and spinel phases are completely decomposed at 500 and 600 °C,respectively.Most of water-soluble sodium vanadates are formed between 500 and 600 °C.When roasting temperature reaches above 700 °C,the vanadium-rich phases of sodium vanadates can be obviously observed.However,at temperature above 800 °C,the samples are sintered.Most of the vanadium is enwrapped by glassy phase compounds which lead to the decrease of the leaching rate of vanadium.At the same time,the effect of roasting temperature on extraction of vanadium and characterization of leach residues were discussed.展开更多
Phase transitions, morphology changes, and oxidation mechanism of the ilmenite oxidation process were investigated. FeTi03 transforms to hematite and rutile when oxidation at 700-800 ℃, and pseudobrookite is formed w...Phase transitions, morphology changes, and oxidation mechanism of the ilmenite oxidation process were investigated. FeTi03 transforms to hematite and rutile when oxidation at 700-800 ℃, and pseudobrookite is formed when the oxidation temperature reaches 900 ℃. The initial ilmenite powder exhibits paramagnetism; however, after being oxidized at the intermediate temperature (800-850 ℃), the oxidation product exhibits weak ferromagnetism. The oxidation mechanism was discussed. The microstructure observations show that a lot of micro-pores emerge on the surfaces of ilmenite particles at the intermediate temperature, which is deemed to be caoable ofenhancin~ the mass transfer ofoxgen during oxidation.展开更多
The permittivity of low grade Panzhuhua ilmenite ore at 2.45 GHz in the temperatures from 20 ℃ up to 100 ℃ was measured using the technology of open-ended coaxial sensor combined with theoretical computation. The re...The permittivity of low grade Panzhuhua ilmenite ore at 2.45 GHz in the temperatures from 20 ℃ up to 100 ℃ was measured using the technology of open-ended coaxial sensor combined with theoretical computation. The results show that both the real (ε′) and imaginary (ε′) part of complex permittivity (ε′-jε′) of the ilmenite significantly increase with temperature. The loss tangent (tanδ) is a quadratic function of temperature, and the penetration depth of ilmenite decreases with temperature increase from 20 ℃to 100 ℃ The increase of the sample temperature under microwave radiation displays a nonlinear relationship between the temperature (T) and microwave heating time (t). The positive feedback interaction between complex permittivity and sample temperature amplifies the interaction between ilmenite and the microwave radiation. The optimum dimensions for uniform heat deposition vary from 10 cm to 5 cm (about two power penetration depths) in a sample being irradiated from both sides in a 2.45 GHz microwave field when temperature increases from room temperature to 100 ℃展开更多
A new combination method consisting of ball milling, carbothermic reduction and hydrochloric acid leaching was proposed for the preparation of nanosized synthetic rutile from natural ilmenite. The ball milling was emp...A new combination method consisting of ball milling, carbothermic reduction and hydrochloric acid leaching was proposed for the preparation of nanosized synthetic rutile from natural ilmenite. The ball milling was employed to grind ilmenite into small particles. The carbothermic reduction was carried out to yield a high titanium slag, which would be easily purified by subsequent leaching procedure. Factors affecting the hydrochloric acid process, namely the leaching time, temperature, and acid concentration, were studied. After leaching and calcining the milled and annealed mixture of FeTiO3/C under the optimal conditions, the TiO2 nanoparticles with size of 10-200 nm and purity〉98.0% were obtained.展开更多
The leaching kinetics of copper from low-grade copper ore was investigated in ammonia-ammonium sulfate solution with sodium persulfate. The effect parameters of stirring speed, temperature, particle size, concentratio...The leaching kinetics of copper from low-grade copper ore was investigated in ammonia-ammonium sulfate solution with sodium persulfate. The effect parameters of stirring speed, temperature, particle size, concentrations of ammonia, ammonium sulfate and sodium persulfate were determined. The results show that the leaching rate is nearly independent of agitation above 300 r/min and increases with the increase of temperature, concentrations of ammonia, ammonium sulfate and sodium persulfate. The EDS analysis and phase quantitative analysis of the residues indicate that bornite can be dissolved by persulfate oxidization. The leaching kinetics with activation energy of 22.91 kJ/mol was analyzed by using a new shrinking core model (SCM) in which both the interfacial transfer and diffusion across the product layer affect the leaching rate. A semi-empirical rate equation was obtained to describe the leaching process and the empirical reaction orders with respect to the concentrations of ammonia, ammonium sulfate and sodium persulfate are 0.5, 1.2 and 0.5, respectively.展开更多
The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction ...The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction treatment and mechanical activation significantly accelerate the extraction of Fe,Ca and Mg from Panxi ilmenite concentration;however,the CaO and MgO contents of the calcined residues obtained from oxidized-reduced ilmenite concentration are higher than the standard values required by chlorination process.The Ca and Mg in oxidized-reduced ilmenite concentration can be leached much faster after mechanical activation,yielding a synthetic rutile which meets the requirements of chlorination process containing 90.50% TiO2 and 1.37% total iron as well as combined CaO and MgO of 1.00%.The optimum oxidation and reduction conditions are as follows:oxidization at 900 ℃ in the presence of oxygen for 15 min and reduction at 750 ℃ by hydrogen for 30 min.展开更多
A systematic investigation on the effect of milling time on carbothermic reduction of ilmenite was carried out by a combination of thermal analysis, X-ray diffraction(XRD), scanning electron microscopy(SEM) and pa...A systematic investigation on the effect of milling time on carbothermic reduction of ilmenite was carried out by a combination of thermal analysis, X-ray diffraction(XRD), scanning electron microscopy(SEM) and particle size analysis. It was shown that the graphite crystalline structure was easily destroyed along the(002) crystal plane during milling process. The particle size of ilmenite/graphite mixture was largely decreased and a fully mixed composite structure was obtained after milling for 4 h at high milling intensity. Milling exerts positive effect on the decreasing temperatures of ilmenite reduction and gradual deoxidizing of titanium oxides was completed.展开更多
Reduction behavior of preoxidized synthetic ilmenite was studied by means of Mossbauer spectra. In the course of reduction, iron component in the samples is reduced in stepwise: Fe 3+ →Fe 2+ →Fe 0, and some...Reduction behavior of preoxidized synthetic ilmenite was studied by means of Mossbauer spectra. In the course of reduction, iron component in the samples is reduced in stepwise: Fe 3+ →Fe 2+ →Fe 0, and some intermediate compounds, such as Fe 3O 4, Fe 2TiO 4 etc . and their solid solution may be generated besides Fe 2O 3 and FeTiO 3. If the reduction temperature is higher than 1173 K, the metallization needs only half time of the case when the temperature is lower than 1073 K.展开更多
The reduction of ilmenite concentrate by hydrogen gas was investigated in the temperature range of 500 to 1200℃. The microstructure and phase transition of the reduction products were studied by X-ray diffraction (...The reduction of ilmenite concentrate by hydrogen gas was investigated in the temperature range of 500 to 1200℃. The microstructure and phase transition of the reduction products were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and optical microscopy (OM). It was found that the weight loss and iron metallization rate increased with the increase of reduction temperature and reaction time. The iron metallization rate could reach 87.5% when the sample was reduced at 1150℃ for 80 min. The final phase constituents mainly consist of Fe, M305 solid solution phase (M=Mg, Ti, and Fe), and few titanium oxide. Microstructure analysis shows that the surfaces of the reduction products have many holes and cracks and the reactions take place from the exterior of the grain to its interior. The kinetics of reduction indicates that the rate-controlling step is diffusion process control with the activation energy of 89 kJ.mo1-1.展开更多
The study on the beneficiation of titanium oxides from Panzhihua ilmenites by reduction of coal bearing pellets was carried out. The iron oxides in pellets were efficiently reduced to metal iron, and titanium oxide sl...The study on the beneficiation of titanium oxides from Panzhihua ilmenites by reduction of coal bearing pellets was carried out. The iron oxides in pellets were efficiently reduced to metal iron, and titanium oxide slag beneficiated was separated from metal iron. The effect of temperature, flux and coal blending ratio on the reduction and separation was investigated, and rational parameters were determined. A new process for the beneficiation of titanium oxides by rotary hearth furnace (RHF) was proposed.展开更多
基金Project(52174384)supported by the National Natural Science Foundation of ChinaProject(LZB2021003)supported by Fundamental Research Funds for the Central Universities,China。
文摘Massive amounts of low-grade tin middlings have been produced from tin tailings,in which arsenic and tin are worthy to be recycled.Owing to high sulfur content in these tin middlings,a novel self-sulfurization roasting was proposed to transform,separate and recover arsenic and tin in this research.There was no extra curing agent to be added,which decreased the formation of pollutant S-containing gas.The self-sulfurization process involved a two-stage roasting of reduction followed by sulfurization.First in reduction roasting,FeAsS decomposed to FeS and As and the As then transformed to As_(4)(g)and As_(4)S_(4)(g),via which the arsenic was separated and recovered.The arsenic content in the first residue could be decreased to 0.72 wt.%.Accompanied with it,the FeS was firstly oxidized to Fe_(1−x)S and then to SO_(2)(g)by the coexisted Fe_(2)O_(3),and finally reduced and combined with the independent Fe_(2)O_(3)to form Fe_(1−x)S.In the followed sulfurization roasting,the Fe_(1−x)S sulfurized SnO_(2)to SnS(g),due to which tin could be recovered and its content in the second residue decreased to 0.01 wt.%.This study provided an efficient method to separate and recover arsenic and tin from low-grade tin middlings.
基金Scientific Research Fund of National Health Commission of China,Key Health Science and Technology Program of Zhejiang Province,No.WKJ-ZJ-2201Key Project of Social Welfare Program of Zhejiang Science and Technology Department,“Lingyan”Program,No.2022C03099and Clinical Research Fund Project of Zhejiang Medical Association,No.2021ZYC-A173.
文摘BACKGROUND Low-grade appendiceal neoplasms(LAMN)are characterized by low incidence and atypical clinical presentations,often leading to misdiagnosis as acute or chronic appendicitis before surgery.The primary diagnostic tool for LAMN is abdominal computed tomography(CT)imaging.Surgical resection remains the cornerstone of LAMN management,necessitating en bloc tumor excision to minimize the risk of iatrogenic rupture.Laparoscopy,known for its minimal invasiveness,reduced postoperative discomfort,and expedited recovery,is a safe and reliable approach for LAMN treatment.Despite the possibility of pseudomyxoma peritonei development,appendectomy and partial appendectomy generally result in negative tumor margins and favorable outcomes,which can be attributed to the disease’s slow growth and lower malignancy.CASE SUMMARY A 71-year-old male patient was admitted to our hospital with a pelvic spaceoccupying lesion detected 1 mo prior.Physical examination showed a soft abdomen without tenderness or rebound and no palpable masses.No shifting dullness was noted,and digital rectal examination revealed no palpable mass.Enteroscopy revealed a raised,smooth-surfaced mass measuring 3.0 cm in the cecum.Abdominal contrast-enhanced CT showed a markedly thickened and dilated appendix with visible cystic shadows.Laparoscopic surgery was performed and revealed a significantly dilated appendix,leading to laparoscopic resection of the appendix and part of the cecum.Post-surgical pathologic analysis confirmed LAMN.The patient received symptomatic and supportive post-operative care and was discharged on postoperative day 4 without complications such as abdominal bleeding,intestinal obstruction,or incision infection.No tumor recurrence was observed during a 7-mo follow-up period.CONCLUSION LAMN is a rare disease that lacks specific clinical manifestations.Abdominal CT plays a crucial role in diagnosing LAMN,and laparoscopic surgery is a safe and effective diagnostic and therapeutic approach.
文摘BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is an extremely rare tumor characterized by the malignant proliferation of myofibroblasts.LGMS most commonly develops in adults,predominantly in males,in the head and neck region,oral cavity,especially on the tongue,mandible,and larynx.This article presents 2 cases of LGMS localized to the maxillary sinus and provides an overview of the available literature.CASE SUMMARY Two patients with LGMS located in the maxillary sinus underwent surgery at the Department of Head and Neck Surgery.Case 1:A 46-year-old patient was admitted to the clinic with suspected LGMS recurrence in the right maxillary sinus(rT4aN0M0),with symptoms of pain in the suborbital area,watering of the right eye,thick discharge from the right nostril,and augmented facial asymmetry.After open biopsy-confirmed LGMS,the patient underwent expanded maxillectomy of the right side with immediate palate reconstruction using a microvascular skin flap harvested surgically from the middle arm.The patient qualified for adjuvant radiotherapy for the postoperative bed,with an additional margin.Currently,the patient is under 1.5 years of observation with no evidence of disease.Case 2:A 45-year-old man was admitted to our clinic with facial asymmetry,strabismus,exophthalmos,and visual impairment in the right eye.Six months earlier,the patient had undergone partial jaw resection at another hospital for fibromatosis.A contrast-enhanced computed tomography scan revealed a tumor mass in the postoperative log after an earlier procedure.An open biopsy confirmed lowgrade fibrosarcoma(rT4aN0M0).The patient qualified for an extended total right maxillectomy with orbital excision and right hemimandibulectomy with immediate microvascular reconstruction using an anterolateral thigh flap.The patient subsequently underwent adjuvant radiotherapy to the postoperative area.After 9 months,recurrence occurred in the right mandibular arch below the irradiated area.The lesion infiltrated the base of the skull,which warranted the withdrawal of radiotherapy and salvage surgery.The patient qualified for palliative chemotherapy with a regimen of doxorubicin+dacarbazine+cyclophosphamide and palliative radiotherapy for bone metastases.The patient died 26 months after surgical treatment.The cases have been assessed and compared with cases in the literature.CONCLUSION No specific diagnostic criteria or treatment strategies have been developed for LGMS.The treatment used for LGMS is the same as that used for sinonasal cancer radical tumor excision;adjuvant radiotherapy or chemoradiotherapy should also be considered.They have low malignant potential but are highly invasive,tend to recur,and metastasize to distant sites.Patients should undergo regular follow-up examinations to detect recurrence or metastasis at an early stage.Patients should be treated and observed at the highest referral centers.
文摘The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.
基金supported by National Natural Science Foundation of China(U2032118 and 42172048)Guizhou Provincial Science and Technology Projects(QKHPTRCYQK[2023]035 and QKHJC-ZK[2021]ZD042)+1 种基金Hundred Talents Program of the Chinese Academy of SciencesGuizhou Provincial 2020 and 2021 Science and Technology Subsidies(Nos.GZ2020SIG and GZ2021SIG)。
文摘The unit-cell parameters and volumes of geikielite(MgTiO_(3))and ilmenite(FeTiO_(3))were investigated at high temperatures up to 700 K and ambient pressure,using in-situ angle-dispersive synchrotron X-ray diffraction.No phase transition was detected over the experimental temperature range.Using(Berman in J Petrol29:445-522,1988.10.1093/petrology/29.2.445)equations to fit the temperature-volume data,the volumetric thermal expansion coefficients at ambient conditions(α_(V0))of MgTiO_(3) and FeTiO_(3) were obtained as follows:2.55(6)×10^(-5)K^(-1)and 2.82(10)×10^(-5)K^(-1),respectively.We infer that the larger effective ionic radius of Fe^(2+)(Ⅵ)(0.78 A)than that of Mg^(2+)(Ⅵ)(0.72?)renders FeTiO_(3)has a larger volumetric thermal expansivity than MgTiO_(3).Simultaneously,the refined axial thermal expansion coefficients under ambient conditions areα_(a0)=0.74(3)×10^(-5)K^(-1)andα_(c0)=1.08(5)×10^(-5)K^(-1)for the aaxis and c-axis of MgTiO_(3),respectively,andα_(a0)=0.95(5)×10^(-5)K^(-1)andα_(c0)=0.92(12)×10^(-5)K^(-1)for the aaxis and c-axis of FeTiO_(3),respectively.The axial thermal expansivity of MgTiO_(3) is anisotropic,but that of FeTiO_(3) is nearly isotropic.We infer that the main reason for the different axial thermal expansivity between MgTiO_(3) and FeTiO_(3) is that the thermal expansion mode of the Mg-O bond in MgTiO_(3) is different from that of the Fe-O bonds in FeTiO_(3).
基金This work was supported by the National Natural Science Foundation of China(U1802256,21773118)Leading Edge Technology of Jiangsu Province(BK20202008)+1 种基金Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX21_0204)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Thermal energy is abundantly available in our daily life and industrial production,and especially,low-grade heat is often regarded as a byproduct.Collecting and utilizing this ignored energy by low-cost and simple technologies may become a smart countermeasure to relieve the energy crisis.Here,a unique device has been demonstrated to achieve high value-added conversion of low-grade heat by introducing redox-active organic alizarin(AZ)onto N-doped hollow carbon nanofibers(N–HCNF)surface.As-prepared N–HCNF/AZ can deliver a high specific capacitance of 514.3 F g^(-1)(at 1 A g^(-1))and an outstanding rate capability of 60.3%even at 50 A g^(-1).Meanwhile,the assembled symmetric proton capacitor can deliver a high energy density of 28.0 Wh kg^(-1) at 350.0 W kg^(-1) and a maximum power density of 35.0 kW kg^(-1) at 17.0 Wh kg^(-1).Significantly,the thermally chargeable proton capacitors can attain a surprisingly high Seebeck coefficient of 15.3 mV K^(-1) and a power factor of 6.02µW g^(-1).Taking advantage of such high performance,a satisfying open-circuit voltage of 481.0 mV with a temperature difference of 54 K is achieved.This research provides new insights into construction of high value-added energy systems requiring high electrochemical performances.
文摘BACKGROUND Low-grade myofibroblastic sarcoma(LGMS)is a rare spindle cell sarcoma espe-cially in the pancreas,with myofibroblastic differentiation.Hitherto,only a few cases have been reported.CASE SUMMARY Herein,we report a case involving the discovery of a pancreatic mass detected during a routine physical examination.Subsequent imaging and pathological tests of the patient led to the diagnosis of LGMS of the pancreas.Following surgical intervention,the patient experienced recurrence and metastasis.Conventional treatment is not effective for postoperative recurrent pancreatic LGMS with multiple metastases.After communicating with the patients and their families,informed consent was obtained for the treatment of anlotinib combined with pembrolizumab.Evaluation of imaging and clinical symptoms post-treatment revealed a relatively favorable response to the combination of anlotinib and pembrolizumab.CONCLUSION Based on the comprehensive literature review,our report aimed to provide evidence for a better understanding of the disease characteristics,diagnostic criteria,imaging findings,and identification of LGMS.And explore novel treatment strategies for this disease.
基金Project (2007CB613602) supported by the National Basic Research Program of China Project (20090162110053) supported by Doctoral Fund of Ministry of Education of China Project (CX2009B049) supported by Hunan Provincial Innovation Foundation For Postgraduate, China
文摘The influence of surface dissolution on flotation separation of fine ilmenite from titanaugite was investigated through infrared spectroscopic (FT-IR) analysis and X-ray photoelectron spectroscopy (XPS) test. The results show that surface dissolution in weak acid solution is helpful to enlarge the floatability difference between ilmenite and titanaugite. In weak acidic solution, as sodium oleate mainly interacts with Fe which results in ilmenite flotation, and surface dissolution is beneficial to its oxidation, the floatability of ilmenite after surface dissolution is increased; meanwhile, sodium oleate interacts with Ca and Mg which results in titanangite flotation, and the quantities of Ca and Mg on the surface of titanautite are decreased due to the surface dissolution, so the floatability of titanaugite after surface dissolution is depressed. For an ilmenite ore obtained from Panzhihua with TiO2 grade of 8.41%, flotation after surface dissolution treatment could increase TiO2 grade of rough concentrate from 26.7% to 31.73 %.
基金Project(51090385)supported by the National Natural Science Foundation of ChinaProject(2007CB613606)supported by the National Basic Research Program of China
文摘The influence of microwave heating on the grinding of Panzhihua ilmenite ore was investigated. Factors that influence the processing are: the microwave exposure time, power density and sample mass. 40 g sample was microwave heated for 30 s with 1 kW of microwave power and followed by water quenching. SEM analysis indicated that intergranular fractures occurred between ores and gangues other than transgranular fractures after microwave treatment, which would liberate minerals from each other effectively. The subsequently magnetic separation trials provided evidence that the recovery rate increased from 44% for raw ore to 72% by microwave treatment.
基金Project(2007CB613606)supported by the National Basic Research Program of ChinaProject(50734007)supported by the National Natural Science Foundation of China
文摘The microwave drying of ilmenite was investigated.The effects of power levels and sample mass on drying characteristics of moisture content,drying rate,moisture ratio were studied,with microwave power ranging from 119 W to 700 W and sample mass from 5 g to 25 g.The drying processes were completed within 2-8 min at different conditions.The moisture content and drying rates are found to be dramatically affected by microwave power density.For all drying processes the prior microwave absorption of moisture produces an accelerating peak on the drying rate curves in the initial stage.For the sample mass of 25 g and power of 385 W,the drying kinetics were studied.The experimental results fit better to the Henderson-Pabis index model rather than the Page's semi-empirical model;the drying rate constant k is increased with the increase of microwave power and decrease of sample mass.
基金Project (2008AA031104) supported by the National High-tech Research and Development Program of China Project (2010063003) supported by the Sharing Fund of Large-scale Equipment of Chongqing University,China
文摘The oxidation process of low-grade vanadium slag in the presence of Na2CO3 was investigated by XRD,SEM/EDS and TG-DSC techniques.The results show that the vanadium slag is oxidized in a temperature range from 273 to 700 °C.Olivine phases and spinel phases are completely decomposed at 500 and 600 °C,respectively.Most of water-soluble sodium vanadates are formed between 500 and 600 °C.When roasting temperature reaches above 700 °C,the vanadium-rich phases of sodium vanadates can be obviously observed.However,at temperature above 800 °C,the samples are sintered.Most of the vanadium is enwrapped by glassy phase compounds which lead to the decrease of the leaching rate of vanadium.At the same time,the effect of roasting temperature on extraction of vanadium and characterization of leach residues were discussed.
基金Project(51074105) supported by the National Natural Science Foundation of ChinaProject(51225401) supported by the China National Funds for Distinguished Young Scientists
文摘Phase transitions, morphology changes, and oxidation mechanism of the ilmenite oxidation process were investigated. FeTi03 transforms to hematite and rutile when oxidation at 700-800 ℃, and pseudobrookite is formed when the oxidation temperature reaches 900 ℃. The initial ilmenite powder exhibits paramagnetism; however, after being oxidized at the intermediate temperature (800-850 ℃), the oxidation product exhibits weak ferromagnetism. The oxidation mechanism was discussed. The microstructure observations show that a lot of micro-pores emerge on the surfaces of ilmenite particles at the intermediate temperature, which is deemed to be caoable ofenhancin~ the mass transfer ofoxgen during oxidation.
基金Projects(51090385,5114703)supported by the National Natural Science Foundation of ChinaProject(2012DFA70570)supported by the International S&T Cooperation Program of ChinaProject(2011FZ038)supported by the Applied Basic Research Project of Yunnan Province
文摘The permittivity of low grade Panzhuhua ilmenite ore at 2.45 GHz in the temperatures from 20 ℃ up to 100 ℃ was measured using the technology of open-ended coaxial sensor combined with theoretical computation. The results show that both the real (ε′) and imaginary (ε′) part of complex permittivity (ε′-jε′) of the ilmenite significantly increase with temperature. The loss tangent (tanδ) is a quadratic function of temperature, and the penetration depth of ilmenite decreases with temperature increase from 20 ℃to 100 ℃ The increase of the sample temperature under microwave radiation displays a nonlinear relationship between the temperature (T) and microwave heating time (t). The positive feedback interaction between complex permittivity and sample temperature amplifies the interaction between ilmenite and the microwave radiation. The optimum dimensions for uniform heat deposition vary from 10 cm to 5 cm (about two power penetration depths) in a sample being irradiated from both sides in a 2.45 GHz microwave field when temperature increases from room temperature to 100 ℃
基金Project (2007CB613601) supported by the National Basic Research Program of ChinaProject supported by the Postdoctoral Science Foundation of Central South University, China
文摘A new combination method consisting of ball milling, carbothermic reduction and hydrochloric acid leaching was proposed for the preparation of nanosized synthetic rutile from natural ilmenite. The ball milling was employed to grind ilmenite into small particles. The carbothermic reduction was carried out to yield a high titanium slag, which would be easily purified by subsequent leaching procedure. Factors affecting the hydrochloric acid process, namely the leaching time, temperature, and acid concentration, were studied. After leaching and calcining the milled and annealed mixture of FeTiO3/C under the optimal conditions, the TiO2 nanoparticles with size of 10-200 nm and purity〉98.0% were obtained.
基金Project(2007CB613601)supported by the National Basic Research Program of ChinaProject(10C1095)supported by the Foundation of Hunan Educational Committee,China
文摘The leaching kinetics of copper from low-grade copper ore was investigated in ammonia-ammonium sulfate solution with sodium persulfate. The effect parameters of stirring speed, temperature, particle size, concentrations of ammonia, ammonium sulfate and sodium persulfate were determined. The results show that the leaching rate is nearly independent of agitation above 300 r/min and increases with the increase of temperature, concentrations of ammonia, ammonium sulfate and sodium persulfate. The EDS analysis and phase quantitative analysis of the residues indicate that bornite can be dissolved by persulfate oxidization. The leaching kinetics with activation energy of 22.91 kJ/mol was analyzed by using a new shrinking core model (SCM) in which both the interfacial transfer and diffusion across the product layer affect the leaching rate. A semi-empirical rate equation was obtained to describe the leaching process and the empirical reaction orders with respect to the concentrations of ammonia, ammonium sulfate and sodium persulfate are 0.5, 1.2 and 0.5, respectively.
基金Project(2009FJ3082)supported by Research Project of Science and Technology in Hunan Province,ChinaProject(2007CB613606)supported by the National Basic Research Program of China
文摘The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction treatment and mechanical activation significantly accelerate the extraction of Fe,Ca and Mg from Panxi ilmenite concentration;however,the CaO and MgO contents of the calcined residues obtained from oxidized-reduced ilmenite concentration are higher than the standard values required by chlorination process.The Ca and Mg in oxidized-reduced ilmenite concentration can be leached much faster after mechanical activation,yielding a synthetic rutile which meets the requirements of chlorination process containing 90.50% TiO2 and 1.37% total iron as well as combined CaO and MgO of 1.00%.The optimum oxidation and reduction conditions are as follows:oxidization at 900 ℃ in the presence of oxygen for 15 min and reduction at 750 ℃ by hydrogen for 30 min.
基金Project(2014JY0132)supported by the Program for Application Basic Research of Sichuan ProvinceChina+5 种基金Projects(2013CY-G-72014CY-G-26-12015CY-G-18)supported by the Technology Research Program of Panzhihua CityChinaProject(2015TX-11)supported by the Innovative Project of Panzhihua CityChina
文摘A systematic investigation on the effect of milling time on carbothermic reduction of ilmenite was carried out by a combination of thermal analysis, X-ray diffraction(XRD), scanning electron microscopy(SEM) and particle size analysis. It was shown that the graphite crystalline structure was easily destroyed along the(002) crystal plane during milling process. The particle size of ilmenite/graphite mixture was largely decreased and a fully mixed composite structure was obtained after milling for 4 h at high milling intensity. Milling exerts positive effect on the decreasing temperatures of ilmenite reduction and gradual deoxidizing of titanium oxides was completed.
文摘Reduction behavior of preoxidized synthetic ilmenite was studied by means of Mossbauer spectra. In the course of reduction, iron component in the samples is reduced in stepwise: Fe 3+ →Fe 2+ →Fe 0, and some intermediate compounds, such as Fe 3O 4, Fe 2TiO 4 etc . and their solid solution may be generated besides Fe 2O 3 and FeTiO 3. If the reduction temperature is higher than 1173 K, the metallization needs only half time of the case when the temperature is lower than 1073 K.
基金supported by the Postgraduate Innovative Foundation of Shanghai University (SHUCX091031)the National Natural Science Foundation of China (No.51074105)the National Basic Research Priorities Program of China (No.2007CB613606)
文摘The reduction of ilmenite concentrate by hydrogen gas was investigated in the temperature range of 500 to 1200℃. The microstructure and phase transition of the reduction products were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and optical microscopy (OM). It was found that the weight loss and iron metallization rate increased with the increase of reduction temperature and reaction time. The iron metallization rate could reach 87.5% when the sample was reduced at 1150℃ for 80 min. The final phase constituents mainly consist of Fe, M305 solid solution phase (M=Mg, Ti, and Fe), and few titanium oxide. Microstructure analysis shows that the surfaces of the reduction products have many holes and cracks and the reactions take place from the exterior of the grain to its interior. The kinetics of reduction indicates that the rate-controlling step is diffusion process control with the activation energy of 89 kJ.mo1-1.
文摘The study on the beneficiation of titanium oxides from Panzhihua ilmenites by reduction of coal bearing pellets was carried out. The iron oxides in pellets were efficiently reduced to metal iron, and titanium oxide slag beneficiated was separated from metal iron. The effect of temperature, flux and coal blending ratio on the reduction and separation was investigated, and rational parameters were determined. A new process for the beneficiation of titanium oxides by rotary hearth furnace (RHF) was proposed.