Soil Heavy Metal Pollution and Health Risk Assessment of Abandoned Land in Coal Mining Areas in Xingren County

Total contents of heavy metals （ Pb, Cr, Cd, Hg, As, Cu, Zn, and Ni） in 68 soil samples were determined to evaluate the contamination level of soil from five coal mine areas in Xingren County, Guizhou province. The pollution levels of heavy metals were characterized by anthro- pogenic influence multiple, and the pollution of heavy metal in soil was evaluated using geo-accumulation index. Based on the health risk models recommended by the U.S. Environmental Protection Agency （ US EPA）, the health risks of heavy metals in the soils were assessed. The results showed that the abandoned land in the five coal mining areas were contaminated by heavy metals, and the order of pollution levels of eight heavy metals was As 〉 Pb 〉 Cu 〉 Hg 〉 Ni 〉 Cr 〉 Cd 〉 Zn. The soils suffered moderate-heavy pollution from As and Pb, and the contents of As and Pb in the soils were 13.16 and 4.76 times higher than the background values of Guizhou Province, followed by Cu, Hg and Ni , while soil pollution from Cr, Cd and Zn was mild. The order of non-caminogenic risks of the heavy metals in the soils was As 〉 Pb 〉 Cr 〉 Ni 〉 Cu 〉 Hg 〉 Cd 〉 Zn, and the non-carcinogenic dsk value of As was higher than that its threshold value 1, which indicated that As had a high potential health risk to adults and children. The order of carcinogen risks of the four heavy metals was As 〉 Cd 〉 Cr 〉 Ni, and the carcinogenic risk value of As was higher than its threshold value, indicating that As had a high carcinogenic risk to adults and children. The carcinogenic risk values of other three heavy metals （ Cd, Cr and Ni） were lower than the threshold value, so they had no carcinogenic risk to human health. Moreover, children were more sensitively affect- ed by heavy metals from the abandoned land. Therefore, the health of children in such areas should be paid more attention to. The HI value of the eight heavy metals to children was seven times higher than that to adults. The contribution rate of HQAs to HI was about 88%, and the contribution rate of CRA, to TCR was about 98%, so As was the most crucial factor influencing non-carcinogenic and carcinogenic dsk in the abandoned soils.

Impact of coal mining on groundwater of Luohe Formation in Binchang mining area

Groundwater of Luohe Formation is the main water source for industrial and agricultural and residential use in Binchang mining area,which is one of the key elements to water conservation coal mining.However,few studies are available to document the enrichment characteristics and influence of underground coal mining on groundwater for the Luohe Formation.This study evaluates the changes of groundwater levels and spring flow caused by mining activities to explore the influence mechanism of coal mining on groundwater by comparatively analysing existing mining data and survey data combined with a series of mapping methods.The results show that the aquifer of Luohe Formation are gradually thinning south-eastwards,disappeared at the mining boundary.In the vertical direction,the lithological structure is distinct,due to alternative sedimentation of meandering river facies and braided river facies.According to the yielding property,the aquifer is divided into three sections,namely,strong water-rich section,medium water-rich section,and weak water-rich section,which are located in northwest and central part,southwest,and the rest part of the mining area,respectively.Mining of Tingnan Coal Mine since 2004 has caused a 3.16 to 194.87 meters drop in groundwater level of Luohe Formation.Until 2015,70.10%of the mining area undergoes a groundwater level drop larger than 10.00 meters.Another influence of underground mining is that the total flow from 34 springs in 8 southern coal mines of the area has decreased by 286.48 L/s with a rate of decrease at 46.95%from 2007 to 2017.The areas that groundwater level falls or spring flow declines are manly located in the mine gob areas.Results also indicate that the ratio of the height of water conducted fracture zone to the mining height in Binchang mining area is between 16.85 and 27.92.This may increase ground water flow in vertical direction,causing a water level in the aquifer system to drop and ultimately decreasing the flow from the springs.The research results will provide data and theoretical support for the protection of groundwater resources and water conservation coal mining of Luohe Formation in Binchang mining area.

Failure characteristics of surface vertical wells for relieved coal gas and their influencing factors in Huainan mining area

Based on data from through-hole and logging,we studied the failure characteristics of surface drainage wells for relieved coal gas in Huainan mining area and its influencing factors.The results show that the damaged positions of drainage wells are mainly located at the thick clay layer in the low alluvium and the lithological interface in the upper section of bedrock in west mining area.The failure depth of casing is 244-670 m and concentrates at about 270-460 m deep.These damaged positions are mainly located in the bending zone according to three zones of rock layers in the vertical section above the roof divided. Generally,the casing begins to deform or damage before the face line about 30-150 m.Special formation structure and rock mass properties are the direct causes of the casing failure,high mining height and fast advancing speed are fundamental reasons for rock mass damage.However,the borehole configuration and spacing to the casing failure are not very clear.

Surrounding Rock Failure Mechanism and Control Technology of Gob-Side Entry with Triangle Coal Pillar at Island Longwall Panel in 15 m Extra-Thick Coal Seams

Taking the return air roadway of Tashan 8204 isolated island working face as the background, the evolution law of the stress field in the surrounding rock of the widened coal pillar area roadway during the mining period of the isolated island working face is obtained through numerical simulation. The hazardous area of strong mine pressure under different coal pillar widths is determined. Through simulation, it is known that when the width of the coal pillar is less than 20 m, there is large bearing capacity on the coal side of the roadway entity. The force on the side of the coal pillar is relatively small. When the width of the coal pillar ranges from 25 m to 45 m, the vertical stress on the roadway and surrounding areas is relatively high. Pressure relief measures need to be taken during mining to reduce surrounding rock stress. When the width of the coal pillar is greater than 45 m, the peak stress of the coal pillar is located in the deep part of the surrounding rock, but it still has a certain impact on the roadway. It is necessary to take pressure relief measures to transfer the stress to a deeper depth to ensure the stability of the triangular coal pillar during the safe mining period of the working face. This provides guidance for ensuring the stability of the triangular coal pillar during the safe mining period of the working face.

Simulation Test for Evolution Laws of Tensile Fractures in a Coal Mining Area

In order to study evolution laws of tensile fractures in a coal mining area, based on the classification of the fractures formed by mining, a physical simulation test was carried out to simulate the dynamic evolution process of tensile fractures in coal mining areas. The results showed that after the coal in the mining area was mined, the mining area underwent obvious movement and deformation and forms tensile fractures. As the min-ing working face was advanced, the tensile fractures underwent the dynamic process of generation, development and closure. The changing curves of density of tensile fractures with the increase of mining length of the working face liked a ladder （it increased slowly and then rapidly） and then had two peaks （the second peak was higher than the first peak）.

The environment of coal mining areas and the economic evaluation of the land reclamation

The environment impact of the coal resources mining was analyzed. The method of economic evaluation for the coal mining was established to analyze land destruction. The opportunity cost method was used to quantitatively analyze and estimate the economic loss of the land destruction by coal mining. At the same time, the dump land reclamation of the Yuanbaoshan Open Pit was taken as an example to evaluate environmental and economical benefit with the method of economic evaluation for the coal mining areas land reclamation.

An Evaluation Study on Water Ecological Civilization Construction in Coal Mining Subsidence Area

By combining expert consultation and field investigation,an evaluation system,consisting of 29 indices in 5 aspects of water safety,water ecology,water management,water landscape and water culture,was established for water ecological civilization construction in coal mining subsidence areas.The weight of the indices was determined using improved group-decision fuzzy analytic hierarchy process and fuzzy mathematical method,and their score was determined according to their value before the pilot and the value at the end of the pilot.Combined with the weight,the actual score of the indices was obtained.Finally,a comprehensive index of water ecological civilization in coal mining subsidence areas was obtained.Through the weight and score of the indices,the construction status,existing problems and future tasks of coal mining subsidence areas were analyzed,in order to provide a reference for the region to further clarify the direction and key tasks of water ecological civilization construction.

Reflectivity forward modeling and a CSSI method seismic inversion study of igneous intrusive area,coked area,and gas-enriched area located within a coal seam

We applied the reflectivity method and the constrained sparse spike inverse modeling(CSSI) method to the interpretation of coal field lithologic seismic data.After introducing the principles of these two methods we discuss some parameters of a geological model involving possible gas enriched areas or intruded igneous rock.The geological model was constructed and a 60 Hz seismic response profile was obtained looking for igneous rock intrusion and coked areas of the coal seam using the reflectivity method.Starting from synthesized logging data from two wells and a synthesized seismic wavelet we calibrated the model to show accurate strata.Finally,we predicted the lithology within a 10 m igneous rock area,a 3 m coal seam area,and a coked area using the CSSI technique.The results show that the CSSI technique can identify hard to recognize lithologic features that normal profil-ing methods might miss.It can quantitatively analyze and evaluate the intrusive area,the coked area,and the gas-enriched area.

Soil heavy metal(loid)s and risk assessment in vicinity of a coal mining area from southwest Guizhou, China

Total concentrations of arsenic, lead, cadmium, mercury, nickel, chromium, and copper in the soils from near a coal mine area in southwest Guizhou, China, were measured to evaluate the level of contamination, and the potential ecological risks posed by the heavy metals were quantitatively estimated. Results reveal that all heavy metals/metalloid exceeded the background values for soil environmental quality of heavy metals in Guizhou area. Geo-accumulation index(I_(geo)) showed that arsenic had the highest contamination level(I_(geo)=4) among the seven heavy metals/metalloid, and the contamination levels of mercury and lead were also relatively high(I_(geo)=3). Pearson correlation and cluster analysis identified that mercury, copper and arsenic had a relationship, and their presence might be mainly related to mining activity, coal and oil combustion, and vehicle emissions. Improved Nemerow index indicated that the overall level of heavy metal contamination in the studied area ranged from moderately–heavily contaminated to heavily contaminated level. Potential ecological risk index(R_I) analysis manifested that the whole ecological risk level ranged from high degree to very high degree(325.30≤R_I≤801.02) in the studied soil samples, and the potential ecological risk factors (E_r^i) of heavy metals/metalloid were as follows: Hg > As > Cd > Pb > Cu > Ni > Cr, and the E_r^i of Hg and As reached very high risk grade.

Optimum location of surface wells for remote pressure relief coalbed methane drainage in mining areas

Based on engineering tests in the Huainan coal mining area,we studied alternative well location to improve the performance of surface wells for remote pressure relief of coalbed methane in mining areas.The key factors,affecting location and well gas production were analyzed by simulation tests for similar material.The exploitation results indicate that wells located in various positions on panels could achieve relatively better gas production in regions with thin Cenozoic layers,low mining heights and slow rate of longwall advancement,but their periods of gas production lasted less than 230 days,as opposed to wells in regions with thick Cenozoic layers,greater mining heights and fast rates of longwall advancement.Wells near panel margins achieved relatively better gas production and lasted longer than centerline wells.The rules of development of mining fractures in strata over panels control gas production of surface wells.Mining fractures located in areas determined by lines of compaction and the effect of mining are well developed and can be maintained for long periods of time.Placing the well at the end of panels and on the updip return airway side of panels,determined by lines of compaction and the effect of mining,would result in surface wells for remote pressure relief CBM obtaining their longest gas production periods and highest cumulative gas production.

Impact of coal gangue on the level of main trace elements in the shallow groundwater of a mine reclamation area

Coal gangue is the most used filling material during reclamation of areas suffering subsidence from min- ing. Main trace element levels (F, As, Hg, and Pb) in shallow groundwater in the reclamation area may be affected by leaching from the gangue. This can has an impact on the application of the water for agricul- tural irrigation or use as drinking water. Therefore, it is of great significance to understand the effect coal gangue has on the shallow groundwater of a reclaimed area. We studied the effect of coal gangue on fluo- rine, arsenic, mercury, and lead levels in the shallow groundwater of a reclamation area by testing the water and the coal gangue. One well near the reclamation area was used as a control well and element levels in water from this well and from the soil next to the well were also measured. The results show that the levels of these elements are increasing in the reclamation area over time. The increase in fluorine, arsenic, mercury, and lead in monitor wells varies from 7.42% to 8.26%, from 7.13% to 7.90%, from 4.85% to 6.48%, and from 4.69% to 6.42%, respectively. Fluorine and arsenic levels are lower in monitor wells than in the control water. The other elements are found in greater concentration than in the control. The Nemerow index also indicates that the shallow groundwater in the reclamation area I is moderately affected by the back-filling coal gangue, while the shallow groundwater in the reclamation area II and III are slightly affected by the back-filling coal gangue. This shallow groundwater could be used for agri- cultural irrigation or for drinking.

Determining areas in an inclined coal seam floor prone to water-inrush by micro-seismic monitoring

The failure depth of the coal seam floor is one important consideration that must be kept in mind when mining is carried out above a confined aquifer.Determining the floor failure depth is the essential precondition for predicting the water-resisting ability of the floor.We have used a high-precision microseismic monitoring technique to overcome the limited amount of data available from field measurements. The failure depth of a coal seam floor,especially an inclined coal seam floor,may be more accurately estimated by monitoring the continuous,dynamic failure of the floor.The monitoring results indicate the failure depth of the coal seam floor near the workface conveyance roadway（the lower crossheading） is deeper and that the failure range is wider here compared to the coal seam floor near the return airway（the upper crossheading）.The results of micro-seismic monitoring show that the dangerous area for water-inrush from the coal seam floor may be identified.This provides an important field measurement that helps ensure safe and highly efficient mining of the inclined coal seam above the confined aquifer at the Taoyuan Coal Mine.

Exploitation technology of pressure relief coalbed methane in vertical surface wells in the Huainan coal mining area

Exploitation technology of pressure relief coalbed methane in vertical surface wells is a new method for exploration of gas and coalbed methane exploitation in mining areas with high concentrations of gas, where tectonic coal developed. Studies on vertical surface well technology in the Huainan Coal Mining area play a role in demonstration in the use of clean, new energy resources, preventing and reducing coal mine gas accidents and protecting the environment. Based on the practice of gas drainage engineering of pressure relief coalbed methane in vertical surface wells and combined with relative geological and exploration en- gineering theories, the design principles of design and structure of wells of pressure relief coalbed methane in vertical surface wells are studied. The effects of extraction and their causes are discussed and the impact of geological conditions on gas production of the vertical surface wells are analyzed. The results indicate that in mining areas with high concentrations of gas, where tectonic coal developed, a success rate of pressure relief coalbed methane in surface vertical well is high and single well production usually great. But deformation due to coal exploitation could damage boreholes and cause breaks in the connection between aquifers and bore-holes, which could induce a decrease, even a complete halt in gas production of a single well. The design of well site location and wellbore configuration are the key for technology. The development of the geological conditions for coalbed methane have a significant effect on gas production of coalbed methane wells.

A Synergetic Study on Large-Scale Coal Mining and Eco-Environment Protection in Shendong Coal Mining Area

Based on the sharp contradiction between the economic benefits and adverse ecological impact of coal development in China's west,this paper establishes an evaluation model for the synergetic eco-environmental development in Shendong Coal Mining Area through using synergism of five laws and the fuzzy comprehensive evaluation method. The analysis on synergy between large-scale coal mining and the eco-environment protection in Shendong is also conducted,arriving at the conclusion that synergetics of Shendong 's eco-environment protection is"good". And thus,the result sheds light on the fact that while working to quench China's energy demand on its path towards a modernized large coal mine complex,Shendong,as part of Shenhua Group's mining operation,has applied innovative management concepts and models to improve eco-environment for harmony and win-win results between resource exploration and environmental protection.

Case study on the extraction of land cover information from the SAR image of a coal mining area

In this study,analyses are conducted on the information features of a construction site,a cornfield and subsidence seeper land in a coal mining area with a synthetic aperture radar (SAR) image of medium resolution. Based on features of land cover of the coal mining area,on texture feature extraction and a selection method of a gray-level co-occurrence matrix (GLCM) of the SAR image,we propose in this study that the optimum window size for computing the GLCM is an appropriate sized window that can effectively distinguish different types of land cover. Next,a band combination was carried out over the text feature images and the band-filtered SAR image to secure a new multi-band image. After the transformation of the new image with principal component analysis,a classification is conducted selectively on three principal component bands with the most information. Finally,through training and experimenting with the samples,a better three-layered BP neural network was established to classify the SAR image. The results show that,assisted by texture information,the neural network classification improved the accuracy of SAR image classification by 14.6%,compared with a classification by maximum likelihood estimation without texture information.

Effect of coal resources development and compensation for damage to cultivated land in mining areas

The exploitation of coal resources inevitably affects, to different degrees, arable land resources and impacts the socio-economic development in mining areas. Therefore it is of great practical importance to probe the rules of the effect from coal resource exploration on arable land. Suitable and effective measures to compensate for damaged to and loss of arable land resources should be taken on the basis of carrying out green mining and reducing damage to limited arable land resources. We have used GIS in simulating the effect of coal resource exploration on arable land. In light of our simulation of the space-time spectrum, the effect is analyzed. Given the socio-economic development conditions of a mining area, specified rational amounts and opportunities for compensation to arable land in mining areas are explored. Finally, from a policy perspective, relevant proposals for rational arable land resource compensation are proposed to facilitate the coordinated development between coal resource exploitation and socio-economy development in mining areas.

Monte-Carlo Method for Coalbed Methane Resource Assessment in Key Coal Mining Areas of China

Monte-Carlo method is used for estimating coalbed methane （CBM） resources in key coal mining areas of China. Monte-Carlo method is shown to be superior to the traditional volumetric method with constant parameters in the calculation of CBM resources. The focus of the article is to introduce the main algorithm and the realization of functions estimated by Monte-Carlo method, including selection of parameters, determination of distribution function, generation of pseudo-random numbers, and evaluation of the parameters corresponding to pseudo-random numbers. A specified software on the basis of Monte-Carlo method is developed using Visual C＋＋ for the assessment of the CBM resources. A case study shows that calculation results using Monte-Carlo method have smaller error range in comparison with those using volumetric method.

Experimental evaluation of activated carbon derived from South Africa discard coal for natural gas storage

Lacking in literature is the use of discard coal to produce activated carbon and in its subsequent use in the storage of natural gas. In this study, the characterization and gas storage evaluation of a largely porous activated carbon with large surface area synthesized from discard coal were investigated. Discard coals are waste material generated from coal beneficiation process. In developing the activated carbon, chemical activation route with the use of KOH reagent was applied. The effects of KOH/discard coal weight ratio (1:1, 2.5:1, 4:1), temperature (400-800 ℃) and particle size (0.15-0.25 mm, 0.25-0.5 mm, 0.5-1 mm) on the adsorptive properties of the activated carbon were methodically evaluated and optimized using response surface methodology. The synthesized activated carbon was characterized using BET, SEM/EDS, and XRD. The results showed that for each activation process, the surface area and pore volume of the resulting activated carbon increased with increased temperature and KOH/discard coal weight ratio. The maximum surface area of 1826.41 m2/g, pore volume of 1.252 cm^3/g and pore size of 2.77 nm were obtained at carbonization temperature of 800 ℃ and KOH/discard coal weight ratio of 4:1. Methane and nitrogen adsorption data at high pressure were fitted to Toth isotherm model with a predictive accuracy of about 99%. Adsorption parameters using the Toth model provides useful information in the design of adsorbed natural gas storage system. According to the requirements of adsorbent desired for natural gas storage, it could be stated that the synthesized activated carbon could well be applied for natural gas storage.

Composite active control system of roof and side truss cable for large section coal roadway in fold coal pillar area

In order to solve the surrounding rock control problem of large section gangue replacement roadway under complicated conditions, this paper analyzed the impact to the roadway controlling produced by the geological conditions such as high ground stress, folded structure tilted roof asymmetry and soft wall rock, and built the tilt layered roof structural mechanics model to clarify the increase span mechanism of the weak coal instability. Then, we proposed the combined control system including roof inclined truss cable, coal-side cable-channel steel and intensive bolt support. And then by building the structural mechanics model of roof inclined truss cable system, the support principle was described. Besides, according to this model, we deduced the calculation formula of cable anchoring force and its tensile stress. Finally surrounding rock control technology of large section roadway in fold coal pillar area was formed. Field practice shows that the greatest roof convergence of gangue replacement roadway is 158 mm and coal-side deformation is 243 mm. Roadway deformation is controlled effectively and technical support is provided for replacement mining.

Evaluation of coal pillar loads during longwall extraction using the numerical method and its application

It is very difficult to reasonably evaluate the loads acting on coal pillars in longwall panels during the planning of a new pillar system. The application of empirical equations is a common practice in calculating coal pillar loads while designing a new pillar. This paper proposes numerical models for evaluating coal pillar loads. The key of building a successful numerical model for calculating coal pillar loads lies in the fact that the model should represent the redistribution of stress all over the longwall panels and the surrounding areas, and it is especially important to include the characteristics of the stress rebuilding process in the gob areas, which are crucial for the building process of coal pillar loads. Based on the geo-mechanical background of the Baoshan Coal Mine, this paper details the procedures of applying numerical models to the evaluation of coal pillar loads and their local practices. The study results show it is feasible and reasonable to use numerical models to evaluate coal pillar loads.