The 2,026 earthquake events registered by the Sichuan regional digital seismic network and mobile seismic array after the April 20th, 2013 Lushan earthquake and 28,188 pieces of data were selected to determine direct ...The 2,026 earthquake events registered by the Sichuan regional digital seismic network and mobile seismic array after the April 20th, 2013 Lushan earthquake and 28,188 pieces of data were selected to determine direct P waves arrival times. We applied the tomographic method to inverse the characteristics of the velocity structure for the three-dimensional （3D） P wave in the mid-upper crust of the seismic source region of the Lushan earthquake. The imaging results were combined with the apparent magnetization inversion and magnetotelluric （MT） sounding retest data to comprehensively study the causes of the deep seismogenic environment in the southern section of the Longmenshan fault zone and explore the formation of the Lushan earthquake. Research has shown that there are obvious differences in velocity structure and magnetic distribution between the southern and northern sections of the Longmenshan fault zone. The epicenter of the Lushan earthquake is located near the boundary of the high and low-velocity anomalies and favorable for a high-velocity section. Moreover, at the epicenter of the Lushan earthquake located on the magnetic dome boundary of Ya＇an, the development of high velocity and magnetic solid medium favors the accumulation and release of strain energy. Low- velocity anomalies are distributed underneath the are of seismogenic origin, The inversion results of the MT retest data after the April 20th Lushan earthquake also indicate that there a high-conductor anomaly occurs under the area of seismogenic origin of the Lushan earthquake, Therefore, we speculated that the presence of a high-conductivity anomaly and low-velocity anomaly underneath the seismogenic body of the Lushan earthquake could be related to the existence of fluids. The role of fluids caused the weakening of the seismogenic layer inside the mid-upper crust and resulted in a seismogenic fault that was prone to rupture and pIayed a triggering role in the Lushan earthquake.展开更多
The Ms7. 0 Lushan earthquake is directly related to the activity of Longmenshan fault zone. In this article, deformation monitoring data in Longmenshan and its surrounding areas were analyzed and the result shows that...The Ms7. 0 Lushan earthquake is directly related to the activity of Longmenshan fault zone. In this article, deformation monitoring data in Longmenshan and its surrounding areas were analyzed and the result shows that the activity trend of Longmenshan fault zone depends on the relative motion between Bayan Hat Block and Sichuan Basin, and the main power of the movement comes from the Tibetan Plateau and the upper Yangtze craton massif of push. In recent years, the Longmenshan and its surrounding areas is one of the main seismogenic area in China's Mainland. In this paper, combination with seismogenic area of geological structure and crustal deformation observation data analysis resuhs, the relationship between the earthquake and Longmenshan fault zone activity was discussed, and the key monitoring areas in the next five years were proposed.展开更多
In this study, we determined fnax from near- field accelerograms of the Lushan earthquake of April 20, 2013 through spectra analysis. The result shows that the values of fmax derived from five different seismography s...In this study, we determined fnax from near- field accelerograms of the Lushan earthquake of April 20, 2013 through spectra analysis. The result shows that the values of fmax derived from five different seismography stations are very close though these stations roughly span about 100 km along the strike. This implies that the cause offmax is mainly the seismic source process rather than the site effect. Moreover, according to the source-cause model of Papageorgiou and Aki （Bull Seism Soc Am 73：693-722, 1983）, we infer that the cohesive zone width of the rupture of the Lushan earthquake is about 204 with an uncertainty of 13 m. We also find that there is a significant bulge between 30 and 45 Hz in the amplitude spectra of accel- erograms of stations 51YAL and 51QLY, and we confirm that it is due to seismic waves＇ reverberation of the sedi- mentary soil layer beneath these stations.展开更多
At 08：02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya＇an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum eart...At 08：02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya＇an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43% It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone （13-19 kin） of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.展开更多
An earthquake in the Jiuzhaigou area caused numerous secondary disasters, such as rolling stones, land collapse, landslides and debris flow, which badly affected the safety of human settlements and influenced the spat...An earthquake in the Jiuzhaigou area caused numerous secondary disasters, such as rolling stones, land collapse, landslides and debris flow, which badly affected the safety of human settlements and influenced the spatial layout of the post-disaster reconstruction. Therefore, carrying out assessments of land and identifying a suitable zone for human habitats were very important. This research creates the territorial suitability assessment and function zoning conceptual model in the earthquake-stricken area, and the new methods of the territorial suitability evaluation system were used to divide the spatial functional zones of the earthquake stricken area, which provide a theoretical guidance and decisionmaking basis for the reconstruction of the disaster area. The results showed that:(1) The Jiuzhaigou earthquake-stricken area comprises of an ecological area that has a high level of importance to the ecosystem. In the earthquake-stricken area, 65% of national land is at an altitude of 3000-4000 m, and therefore not suitable for a high level of intensive reconstruction, but reconstructed in an eco-friendly manner.(2) The zone suitable for reconstruction comprises mainly of the river valley and the flat terrain of western parts. The land with low suitability is mainly located on steep terrain, such as highmountains and low gullies. The geographic and geomorphic conditions limit the spread of a suitable reconstruction zone.(3) The earthquake-stricken area mainly comprises of a tourism industry gathering area, population gathering area, agriculture and animal husbandry development area, and ecological preservation area with areas of 76 km^2, 44 km^2, 1591 km^2 and 7512 km^2, respectively. Scientifically zoning the reconstruction areas using scientific evaluation may provide guidance for the location of reconstruction sites.展开更多
In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displac...In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displacement time series data in the south segment of Longmenshan fault zone,and the rigid and elastic-plastic block motion model is used to calculate the strain parameters in each subarea. Conjoint analysis of displacement,velocity of each station and strain parameters of each subarea reveals that the influence of the Wenchuan earthquake on the south segment of Longmenshan fault zone increases from southeast to northwest,causing a highest deformation rate 6 times the background value and heightening the influence of the hidden faults on the difference of the earth surface along its two sides,which leads to the seismic risk of the southern segment increasing from north to south. The comparison of seismic risk among subareas based on the tectonic and seismicity background indicates that the most dangerous area is on the southeast of Longmenshan faults,and the background strain accumulation and the promoting effect of the Wenchuan earthquake advanced the occurrence of Lushan earthquake and the sinistral strike-slip on the rupture plane. The Wenchuan earthquake also caused a slight two-year long continuous strain release in the south segment of Xianshuihe fault,but the influence is far less than the effect of the compressive strain caused by the Sichuan-Yunnan block.展开更多
基金supported by China earthquake scientific array exploration-northern section of North South seismic belt (20130811)National Natural Science Foundation of China (41474057)Science for earthquake Resllience of China Earthquake Administration (XH15040Y)
文摘The 2,026 earthquake events registered by the Sichuan regional digital seismic network and mobile seismic array after the April 20th, 2013 Lushan earthquake and 28,188 pieces of data were selected to determine direct P waves arrival times. We applied the tomographic method to inverse the characteristics of the velocity structure for the three-dimensional （3D） P wave in the mid-upper crust of the seismic source region of the Lushan earthquake. The imaging results were combined with the apparent magnetization inversion and magnetotelluric （MT） sounding retest data to comprehensively study the causes of the deep seismogenic environment in the southern section of the Longmenshan fault zone and explore the formation of the Lushan earthquake. Research has shown that there are obvious differences in velocity structure and magnetic distribution between the southern and northern sections of the Longmenshan fault zone. The epicenter of the Lushan earthquake is located near the boundary of the high and low-velocity anomalies and favorable for a high-velocity section. Moreover, at the epicenter of the Lushan earthquake located on the magnetic dome boundary of Ya＇an, the development of high velocity and magnetic solid medium favors the accumulation and release of strain energy. Low- velocity anomalies are distributed underneath the are of seismogenic origin, The inversion results of the MT retest data after the April 20th Lushan earthquake also indicate that there a high-conductor anomaly occurs under the area of seismogenic origin of the Lushan earthquake, Therefore, we speculated that the presence of a high-conductivity anomaly and low-velocity anomaly underneath the seismogenic body of the Lushan earthquake could be related to the existence of fluids. The role of fluids caused the weakening of the seismogenic layer inside the mid-upper crust and resulted in a seismogenic fault that was prone to rupture and pIayed a triggering role in the Lushan earthquake.
基金supported by the Special Fund for Earthquake Research in the Public Interest(201208009201308009)
文摘The Ms7. 0 Lushan earthquake is directly related to the activity of Longmenshan fault zone. In this article, deformation monitoring data in Longmenshan and its surrounding areas were analyzed and the result shows that the activity trend of Longmenshan fault zone depends on the relative motion between Bayan Hat Block and Sichuan Basin, and the main power of the movement comes from the Tibetan Plateau and the upper Yangtze craton massif of push. In recent years, the Longmenshan and its surrounding areas is one of the main seismogenic area in China's Mainland. In this paper, combination with seismogenic area of geological structure and crustal deformation observation data analysis resuhs, the relationship between the earthquake and Longmenshan fault zone activity was discussed, and the key monitoring areas in the next five years were proposed.
基金supported by the National Nature Science Foundation of China(Grant numbers:41090293,41274053)
文摘In this study, we determined fnax from near- field accelerograms of the Lushan earthquake of April 20, 2013 through spectra analysis. The result shows that the values of fmax derived from five different seismography stations are very close though these stations roughly span about 100 km along the strike. This implies that the cause offmax is mainly the seismic source process rather than the site effect. Moreover, according to the source-cause model of Papageorgiou and Aki （Bull Seism Soc Am 73：693-722, 1983）, we infer that the cohesive zone width of the rupture of the Lushan earthquake is about 204 with an uncertainty of 13 m. We also find that there is a significant bulge between 30 and 45 Hz in the amplitude spectra of accel- erograms of stations 51YAL and 51QLY, and we confirm that it is due to seismic waves＇ reverberation of the sedi- mentary soil layer beneath these stations.
基金part of the investigation achievements made by the Lushan Earthquake Scientific Expedition of the Chinese Academy of Geological Sciences and supported by the SinoProbe-08-01National Key Basic Project (973) (granted number 2008CB425702)China Geological Survey project (granted number 1212011120167)
文摘At 08：02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya＇an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43% It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone （13-19 kin） of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.
基金supported by the National Science and Technology Major Project for Water Pollution Control and Treatment (Grant No. 2017ZX07101001)National Natural Science Foundation of China (Grant NO.41671529)+2 种基金the Hundred Young Talents Program of the Institute of Mountain Hazards and Environment (Grant No. SDSQB-2015-01)the Monitoring and Warning Program for Resources and Environment Carrying Capability in Sichuan Province (Grant No. ZXGH201709)the Program for Resource and Environment Carrying Capability in Jiu ZhaiG ou Earthquake Disaster Area (Grant No. Y7K2190190)
文摘An earthquake in the Jiuzhaigou area caused numerous secondary disasters, such as rolling stones, land collapse, landslides and debris flow, which badly affected the safety of human settlements and influenced the spatial layout of the post-disaster reconstruction. Therefore, carrying out assessments of land and identifying a suitable zone for human habitats were very important. This research creates the territorial suitability assessment and function zoning conceptual model in the earthquake-stricken area, and the new methods of the territorial suitability evaluation system were used to divide the spatial functional zones of the earthquake stricken area, which provide a theoretical guidance and decisionmaking basis for the reconstruction of the disaster area. The results showed that:(1) The Jiuzhaigou earthquake-stricken area comprises of an ecological area that has a high level of importance to the ecosystem. In the earthquake-stricken area, 65% of national land is at an altitude of 3000-4000 m, and therefore not suitable for a high level of intensive reconstruction, but reconstructed in an eco-friendly manner.(2) The zone suitable for reconstruction comprises mainly of the river valley and the flat terrain of western parts. The land with low suitability is mainly located on steep terrain, such as highmountains and low gullies. The geographic and geomorphic conditions limit the spread of a suitable reconstruction zone.(3) The earthquake-stricken area mainly comprises of a tourism industry gathering area, population gathering area, agriculture and animal husbandry development area, and ecological preservation area with areas of 76 km^2, 44 km^2, 1591 km^2 and 7512 km^2, respectively. Scientifically zoning the reconstruction areas using scientific evaluation may provide guidance for the location of reconstruction sites.
基金sponsored by the Director Fund of Institute of Seismology,China Earthquake Administration(IS201526240)Data Sharing Special Project of the Ministry of Science and Technology,the People's Republic of China(IS20135065)
文摘In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displacement time series data in the south segment of Longmenshan fault zone,and the rigid and elastic-plastic block motion model is used to calculate the strain parameters in each subarea. Conjoint analysis of displacement,velocity of each station and strain parameters of each subarea reveals that the influence of the Wenchuan earthquake on the south segment of Longmenshan fault zone increases from southeast to northwest,causing a highest deformation rate 6 times the background value and heightening the influence of the hidden faults on the difference of the earth surface along its two sides,which leads to the seismic risk of the southern segment increasing from north to south. The comparison of seismic risk among subareas based on the tectonic and seismicity background indicates that the most dangerous area is on the southeast of Longmenshan faults,and the background strain accumulation and the promoting effect of the Wenchuan earthquake advanced the occurrence of Lushan earthquake and the sinistral strike-slip on the rupture plane. The Wenchuan earthquake also caused a slight two-year long continuous strain release in the south segment of Xianshuihe fault,but the influence is far less than the effect of the compressive strain caused by the Sichuan-Yunnan block.
