期刊文献+
共找到9,666篇文章
< 1 2 250 >
每页显示 20 50 100
Congenital Cervico-Mandibular Cystic Lymphangioma in Pediatric Surgical Setting in Guinea
1
作者 Thierno Saïdou Barry Mohamed Lamine Sadou Sacko +8 位作者 Balla Keita Aissatou Bailo Balde Mamadou Alpha Diallo Moussa Conde Ibrahima Kalil Dioubate Mory Sangare Salamata Sall Mariama Dalanda Diallo Daniel Agbo-Panzo 《Open Journal of Pediatrics》 2024年第1期164-173,共10页
Introduction: Cystic lymphangiomas are rare benign malformative tumors of the lymphatic system of obscure etiopathogenesis. The cervico-facial location remains the most common (75%). Although benign, these tumors rema... Introduction: Cystic lymphangiomas are rare benign malformative tumors of the lymphatic system of obscure etiopathogenesis. The cervico-facial location remains the most common (75%). Although benign, these tumors remain potentially fatal, due to possible compression of the upper aero-digestive tract. The aim of this work is to study the epidemiological, diagnostic and therapeutic characteristics of cervico-mandibular congenital cystic lymphangiomas in the pediatric surgery department of the Donka National Hospital (HND) Conakry. Patients and methods: This is a retrospective and descriptive study of 13 files lasting 7 years from January 2015 to December 31, 2021. The files of children whose age is less than or equal to 15 years operated on cervical tumor with histological evidence of cystic lymphangioma were retained. The data were analyzed using SPSS statistical software 21 and anonymously. Results: The incidence of this study was 1.86 cases per year and a sex ratio of 0.62 in favor of girls. The average age was 8 months 19 days. In the antecedents, we only find poorly monitored pregnancies. The average size of the tumors was 11.85 cm. Cervical ultrasound and standard x-ray of the cervical mass were the only examinations performed. Total surgical excision of the cervical tumor was performed in all patients. The mass was polycystic on exploration. The histological examination of the surgical specimens was in favor of a cystic lymphangioma. The surgical consequences were simple in 11 patients (84.62%) and complicated by parietal suppuration in 2 cases (15.38%). There were no cases of recurrence after one year of follow-up. Conclusion: Cervico-mandibular cystic lymphangiomas are the most frequent locations of congenital lymphangiomas in children. Their severity is linked to the risk of compression of the aero-digestive tracts. Their diagnosis must be confirmed by the histology of the surgical specimen. Despite the therapeutic arsenal, excision of the cystic mass remains the only effective alternative in our socio-economic conditions to avoid recurrences and loss of follow-up of patients. 展开更多
关键词 Congenital Cystic lymphangioma (LKC) CHILD Pediatric surgery Guinea
下载PDF
小麦SUS基因家族鉴定与生物信息学分析
2
作者 孔斌雪 李娜 +5 位作者 马靖福 窦佳欣 陈涛 张沛沛 刘媛 杨德龙 《云南农业大学学报(自然科学版)》 CAS CSCD 北大核心 2024年第1期1-8,共8页
【目的】对小麦蔗糖合成酶(sucrose synthase,SUS)基因家族进行鉴定和生物信息学分析,为探究小麦SUS(TaSUS)基因家族的作用机制提供理论参考。【方法】采用生物信息学方法在小麦全基因组上鉴定TaSUS基因家族成员,并对其系统进化关系、... 【目的】对小麦蔗糖合成酶(sucrose synthase,SUS)基因家族进行鉴定和生物信息学分析,为探究小麦SUS(TaSUS)基因家族的作用机制提供理论参考。【方法】采用生物信息学方法在小麦全基因组上鉴定TaSUS基因家族成员,并对其系统进化关系、染色体位置、基因结构、保守结构域、启动子顺式作用元件和基因表达模式进行分析。【结果】在小麦基因组中共鉴定到分布于14条染色体上的24个TaSUS基因,可分为3个亚组。TaSUS基因含有多个外显子,但部分基因缺失非翻译区结构。TaSUS基因家族成员启动子区域包含45种顺式作用元件,涉及植物生长发育和逆境胁迫响应。大多数TaSUS基因在小麦穗中显著表达,在叶、茎和根中的相对表达量较低。【结论】研究结果有助于了解小麦SUS基因家族的进化,为后期小麦SUS基因家族的生物功能研究奠定理论基础。 展开更多
关键词 小麦 蔗糖合成酶(suS) 生物信息学分析 基因表达
下载PDF
SUS321不锈钢表面Cr/CrN涂层的制备与抗氧化及耐腐蚀研究
3
作者 张林嘉 卢婷 +2 位作者 李恒 李亚茹 许海龙 《热加工工艺》 北大核心 2024年第6期149-156,共8页
采用磁控溅射技术,在SUS321不锈钢表面制备Cr/Cr N涂层,利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)及分析天平等分别表征样品高温氧化及酸性盐雾腐蚀实验后的微结构及增重。结果表明,当磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1的涂... 采用磁控溅射技术,在SUS321不锈钢表面制备Cr/Cr N涂层,利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)及分析天平等分别表征样品高温氧化及酸性盐雾腐蚀实验后的微结构及增重。结果表明,当磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1的涂层样品抗氧化性能及耐腐蚀性能最佳。在此基础上通过循环沉积制备了多层Cr/CrN涂层,6周期涂层样品在600℃氧化200 h后的单位面积增重为3.599 g/m^(2),表面氧化膜致密,没有出现剥落现象;6周期的涂层样品在酸性盐雾环境中能够保持480 h表面无变化,在放置500 h后边缘部位才开始出现轻微锈迹。固定磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1时,制备的6周期Cr/CrN多层膜涂层具有最佳的抗氧化及耐酸性盐雾腐蚀性能。 展开更多
关键词 suS321不锈钢 磁控溅射 Cr/CrN涂层 抗氧化性能 耐腐蚀性能
下载PDF
Transoral robotic surgery for adult parapharyngeal lymphangioma:A case report
4
作者 Surender Dabas Nandini N Menon +7 位作者 Reetesh Ranjan Bikas Gurung Himanshu Shukla Ashwani K Sharma Sukirti Tiwari Ajit Sinha Sahibinder Singh Bhatti Rishu Sangal 《World Journal of Otorhinolaryngology》 2023年第2期23-29,共7页
BACKGROUND Lymphangiomas are a group of benign swellings which are commonly seen in children.The most common sites of presentation is the head and neck region,less commonly seen in axilla,chest,liver,spleen,etc.The id... BACKGROUND Lymphangiomas are a group of benign swellings which are commonly seen in children.The most common sites of presentation is the head and neck region,less commonly seen in axilla,chest,liver,spleen,etc.The ideal modality of treatment has always been surgical excision irrespective of the site and age group.But with the advent of minimally invasive surgical techniques,it is now possible to perform excision of parapharyngeal space lesions with minimal morbidity and good clearance.CASE SUMMARY A 42-year-old male patient who presented with difficulty in swallowing and had undergone surgery twice outside,where Transcervical approach was attempted to remove the parapharyngeal mass,but failed.Magnetic resonance imaging scan demonstrated a 6 cm x 5 cm x 4 cm left parapharyngeal mass.He underwent transoral robotic surgery for the excision of the parapharyngeal lesion and had an uneventful post-operative recovery.CONCLUSION Lymphangiomas are hamartomatous swellings which are benign in nature.The symptoms of the patient with large parapharyngeal mass include dysphagia,dyspnoea and neck swelling.Clinicoradiological evaluation is of utmost importance to determine the adjacent vital structures and the approach to the tumor.With the advent of robotics in oncology,transoral robotic excision is one of the best approaches to perform such a surgery. 展开更多
关键词 lymphangioma Parapharyngeal space lesions Transoral robotic surgery for parapharyngeal space mass Case report
下载PDF
Rupture of a giant jejunal mesenteric cystic lymphangioma misdiagnosed as ovarian torsion: A case report
5
作者 Jing Xu Tie-Feng Lv 《World Journal of Clinical Cases》 SCIE 2024年第4期847-852,共6页
BACKGROUND Cystic lymphangioma is a rare benign tumor that affects the lymphatic system.Mesenteric lymphangiomas in the small bowel are extremely uncommon.CASE SUMMARY We present a 21-year-old female patient who compl... BACKGROUND Cystic lymphangioma is a rare benign tumor that affects the lymphatic system.Mesenteric lymphangiomas in the small bowel are extremely uncommon.CASE SUMMARY We present a 21-year-old female patient who complained of abdominal pain.The diagnosis of ovarian torsion was suspected after abdominopelvic unenhanced computed tomography and ultrasound revealed a large cyst in contact with the bladder,ovary,and uterus.The patient underwent emergency laparotomy per-formed by gynecologists,but it was discovered that the cystic tumor originated from the jejunum.Gastrointestinal surgeons were then called in to perform a cystectomy.Pathological examination confirmed the diagnosis of cystic lymphangioma of the mesentery.The patient had an uneventful postoperative recovery.CONCLUSION Mesenteric lymphangiomas can cause abdominal pain,and imaging techniques can help determine their characteristics,location,and size.Complete surgical excision and pathological examination are considered the standard treatment and diagnostic method. 展开更多
关键词 RUPTURE JEJUNUM Mesenteric cystic lymphangioma Ovarian torsion surgical excision Pathological examination Case report
下载PDF
厚壁SUS321焊接工艺研究
6
作者 李晓峰 黄超 《锅炉制造》 2024年第1期46-49,共4页
SUS321是含有稳定化元素Ti的奥氏体型不锈钢,在锅炉和石化容器产品中有着广泛应用。厚壁SUS321在应用中较为少见,其埋弧焊焊接工艺的应用及厚壁条件下的试板成形需要经过验证,其各项性能也需得到保证。通过焊接工艺试验,对厚壁SUS321不... SUS321是含有稳定化元素Ti的奥氏体型不锈钢,在锅炉和石化容器产品中有着广泛应用。厚壁SUS321在应用中较为少见,其埋弧焊焊接工艺的应用及厚壁条件下的试板成形需要经过验证,其各项性能也需得到保证。通过焊接工艺试验,对厚壁SUS321不锈钢试板进行工艺性检验,并对试板进行力学性能、微观组织等检验。最终证明用于厚壁SUS321国产埋弧焊焊丝工艺性良好,各项性能均满足使用要求。 展开更多
关键词 不锈钢埋弧焊 suS321 焊接工艺试验
下载PDF
SUS430LX冷弯裂纹缺陷分析与控制
7
作者 程云霞 《甘肃冶金》 2024年第2期100-104,共5页
冷弯开裂是一种材料加工性能类缺陷,针对SUS430LX冷弯开裂缺陷,采用扫描电镜和能谱分析检测了冷弯部位及基体析出相情况。从检测分析结果来看,析出相是引起冷弯开裂的主要原因。围绕断面不同位置析出相的特点,对影响析出相尺寸、数量及... 冷弯开裂是一种材料加工性能类缺陷,针对SUS430LX冷弯开裂缺陷,采用扫描电镜和能谱分析检测了冷弯部位及基体析出相情况。从检测分析结果来看,析出相是引起冷弯开裂的主要原因。围绕断面不同位置析出相的特点,对影响析出相尺寸、数量及类型的主要因素进行了讨论,并提出优化方向。 展开更多
关键词 suS430LX 冷弯开裂 析出相 析出顺序 冷却强度
下载PDF
Intermittent melena and refractory anemia due to jejunal cavernous lymphangioma:A case report
8
作者 Kai-Rui Liu Sheng Zhang +2 位作者 Wei-Run Chen You-Xing Huang Xu-Guang Li 《World Journal of Gastrointestinal Surgery》 SCIE 2024年第4期1208-1214,共7页
BACKGROUND Lymphangiomas in the gastrointestinal tract are extremely rare in adults.As a benign lesion,small intestine lymphangiomas often remain asymptomatic and pose challenges for definitive diagnosis.However,lymph... BACKGROUND Lymphangiomas in the gastrointestinal tract are extremely rare in adults.As a benign lesion,small intestine lymphangiomas often remain asymptomatic and pose challenges for definitive diagnosis.However,lymphangiomas can give rise to complications such as abdominal pain,bleeding,volvulus,and intussusception.Here,we report a case of jejunal cavernous lymphangioma that presented with intermittent melena and refractory anemia in a male adult.CASE SUMMARY A 66-year-old man presented with intermittent melena,fatigue and refractory anemia nine months prior.Esophagogastroduodenoscopy and colonoscopy were performed many times and revealed no apparent bleeding.Conservative management,including transfusion,hemostasis,gastric acid secretion inhibition and symptomatic treatment,was performed,but the lesions tended to recur shortly after surgery.Ultimately,the patient underwent capsule endoscopy,which revealed a more than 10 cm lesion accompanied by active bleeding.After singleballoon enteroscopy and biopsy,a diagnosis of jejunal cavernous lymphangioma was confirmed,and the patient underwent surgical resection.No complications or recurrences were observed postoperatively.CONCLUSION Jejunal cavernous lymphangioma should be considered a cause of obscure gastrointestinal bleeding.Capsule endoscopy and single-balloon enteroscopy can facilitate diagnosis.Surgical resection is an effective management method. 展开更多
关键词 Intermittent melena Refractory anemia Capsule endoscopy Single-balloon enteroscopy Jejunal cavernous lymphangioma Enterectomy Case report
下载PDF
从小米SU7爆火看雷军十八般营销武艺
9
作者 张少辉 《企业管理》 2024年第5期67-70,共4页
近日,小米汽车SU7重磅发布,根据小米汽车官方信息,4分钟内完成大定10000辆,27分钟实现50000辆,24小时达88898辆。小米汽车旗开得胜,它像鲶鱼一样,无形中搅动了新能源汽车市场。雷军的营销能力有目共睹,这一仗让他再创辉煌。小米汽车面... 近日,小米汽车SU7重磅发布,根据小米汽车官方信息,4分钟内完成大定10000辆,27分钟实现50000辆,24小时达88898辆。小米汽车旗开得胜,它像鲶鱼一样,无形中搅动了新能源汽车市场。雷军的营销能力有目共睹,这一仗让他再创辉煌。小米汽车面世用到了18个经典营销原理,其具体做法对营销人员具有借鉴意义。 展开更多
关键词 小米汽车 su7 雷军 营销理论 客户思维
下载PDF
SUS441不锈钢/Al金属间化合物微叠层复合板的界面结构与力学性能
10
作者 黄蔚泓 袁文铮 +4 位作者 吴宇星 刘淳熙 满达 魏振雄 祖国胤 《有色金属材料与工程》 CAS 2024年第1期59-65,共7页
采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、... 采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、维氏硬度、拉伸性能的影响。结果表明:复合板界面结合良好;热处理后,固–液反应界面氧化严重,易导致界面分层而开裂;固–固、固–半固、固–液热处理后,金属间化合物层由均匀层和两相层组成,均匀层的物相组成为Fe_(2)A_(15),两相层的物相组成为Fe_(4)Al_(13)和Al_(13)Cr_(2),且两相层具有韧性特征,固–半固反应所得到的复合板的综合力学性能最佳。 展开更多
关键词 suS441不锈钢/Al 微叠层复合板 热轧复合 合金化 界面
下载PDF
Calculation of the Standard Model Parameters and Particles Based on a SU(4) Preon Model
11
作者 Jan Helm 《Journal of Modern Physics》 2024年第1期64-124,共61页
This paper describes an extension and a new foundation of the Standard Model of particle physics based on a SU(4)-force called hyper-color, and on preon subparticles. The hyper-color force is a generalization of the S... This paper describes an extension and a new foundation of the Standard Model of particle physics based on a SU(4)-force called hyper-color, and on preon subparticles. The hyper-color force is a generalization of the SU(2)-based weak interaction and the SU(1)-based right-chiral self-interaction, in which the W-and the Z-bosons are Yukawa residual-field-carriers of the hyper-color force, in the same sense as the pions are the residual-field-carriers of the color SU(3) interaction. Using the method of numerical minimization of the SU(4)-action based on this model, the masses and the inner structure of leptons, quarks and weak bosons are calculated: the mass results are very close to the experimental values. We calculate also precisely the value of the Cabibbo angle, so the mixing matrices of the Standard model, CKM matrix for quarks and PMNS matrix for neutrinos can also be calculated. In total, we reduce the 29 parameters of the Standard Model to a total of 7 parameters. 展开更多
关键词 su(4) Generalization of Weak Interaction Extension of Standard Model Numerical Minimization of Action Hyper-Color Preon
下载PDF
被围剿的SU7,小米造车的三张牌
12
作者 王迪 《世界汽车》 2024年第4期50-51,共2页
小米SU7上市。2024年开年这几个月的时间里,中国汽车市场发生了翻天覆地的变化,小米能否三年磨一剑,在造车领域站稳脚跟?3月28日,雷军宣布小米SU7正式上市。人们等待小米的这款新车已经很久了。早在2023年12月的小米汽车技术发布会上,... 小米SU7上市。2024年开年这几个月的时间里,中国汽车市场发生了翻天覆地的变化,小米能否三年磨一剑,在造车领域站稳脚跟?3月28日,雷军宣布小米SU7正式上市。人们等待小米的这款新车已经很久了。早在2023年12月的小米汽车技术发布会上,雷军就曾公布过SU7的外观与部分性能,然而直到今年3月,正式的价格才姗姗来迟。不知道三年前雷军推动小米进入造车行业时,有没有想过小米的第一款车会如此“难产”。 展开更多
关键词 雷军 造车 小米 三年 su 发布会 中国汽车市场
下载PDF
Study on Traditional Architectural Decoration Patterns of Temple of the Three Sus
13
作者 Jieyi Jiang 《Journal of Architectural Research and Development》 2024年第3期162-171,共10页
Temple of the Three Sus,which was first established during the Yuan Dynasty,features a natural,unrestrained,and classically elegant garden architectural style.This paper discusses the multiple characteristics and mean... Temple of the Three Sus,which was first established during the Yuan Dynasty,features a natural,unrestrained,and classically elegant garden architectural style.This paper discusses the multiple characteristics and meanings of traditional architectural decorative patterns at Temple of the Three Sus from a semiotic perspective.First,it analyzes the denotative aspects of these patterns,including their stylistic forms,structural frameworks,and craftsmanship techniques.Second,the paper classifies the traditional architectural decorative patterns of the Temple of the Three Sus based on the types of sources of these patterns and interprets the implied meanings of each.Finally,the paper explores the application of these traditional decorative patterns in modern urban design,specifically in Meishan City,discussing the inheritance and innovation of these patterns in contemporary urban design and emphasizing the importance of integrating tradition with modernity. 展开更多
关键词 Temple of the Three sus Traditional architecture Decorative patterns Auspiciousness
下载PDF
小米SU7
14
《汽车观察》 2024年第3期54-54,共1页
售价:21.59万~29.99万元年轻人的第一辆保时米小米SU7车长4997mm、车宽1963mm、车高1440mm、轴距3000mm,超低风阻系数0.195,是一款标准的C级轿车。采用双层镀银的防晒隔热天幕,紫外线隔绝率达到99.9%,红外线隔绝率99.1%;小米SU7 Max双... 售价:21.59万~29.99万元年轻人的第一辆保时米小米SU7车长4997mm、车宽1963mm、车高1440mm、轴距3000mm,超低风阻系数0.195,是一款标准的C级轿车。采用双层镀银的防晒隔热天幕,紫外线隔绝率达到99.9%,红外线隔绝率99.1%;小米SU7 Max双电机、全轮驱动、800V碳化硅高压动力平台,673匹马力、838 N·m动力,零百加速时间2.78s。 展开更多
关键词 全轮驱动 风阻系数 双电机 动力平台 小米 红外线 su
下载PDF
雷军造车:小米SU7的三场战事
15
作者 杨继刚 《销售与市场》 2024年第6期74-78,共5页
雷军兑现承诺,小米SU7下场—一半是火焰,一半是海洋2024年3月28日19:00,小米SU7产品发布会在北京拉开帷幕。这一天,距离2021年3月30日“雷军官宣小米造车”整整过去1094天,雷军兑现了承诺。这场被雷军称为“押上自己全部身家”的“人生... 雷军兑现承诺,小米SU7下场—一半是火焰,一半是海洋2024年3月28日19:00,小米SU7产品发布会在北京拉开帷幕。这一天,距离2021年3月30日“雷军官宣小米造车”整整过去1094天,雷军兑现了承诺。这场被雷军称为“押上自己全部身家”的“人生最后一次创业”,终于开花结果。 展开更多
关键词 雷军 小米 造车 su 一次创业 发布会 兑现承诺 开花结果
下载PDF
英飞凌与小米汽车达成协议,2027年前将向SU7供应先进功率半导体
16
《变频器世界》 2024年第5期34-34,共1页
5月6日消息,英飞凌科技股份公司今日宣布,将为小米SU7供应碳化硅HybridPACK Drive G2 CoolSiC TM功率模块及芯片产品直至2027年。英飞凌方面称,其为小米SU7Max供应两颗1200V HybridPACK Drive G2 CoolSiC模块,还为小米汽车供应满足不同... 5月6日消息,英飞凌科技股份公司今日宣布,将为小米SU7供应碳化硅HybridPACK Drive G2 CoolSiC TM功率模块及芯片产品直至2027年。英飞凌方面称,其为小米SU7Max供应两颗1200V HybridPACK Drive G2 CoolSiC模块,还为小米汽车供应满足不同需求的其它广泛产品,例如不同应用中的EiceDRIVERTM栅极驱动器和10款以上的微控制器。同时,两家公司还同意在碳化硅汽车应用领域开展进一步合作。 展开更多
关键词 功率半导体 英飞凌科技 芯片产品 功率模块 小米 应用领域 su 微控制器
下载PDF
SU在《画法几何与阴影透视》课程中的应用研究
17
作者 董成 刘禹 +3 位作者 孙刚 王侠 郑爽 沈梦萨 《砖瓦》 2024年第2期162-164,共3页
《画法几何与阴影透视》课程是建筑学专业的一门重要专业基础课,主要锻炼学生识图和画图的能力,由于学生的三维想象力较差且前期没有专业实践的机会,导致学生学习困难,尤其是阴影透视部分的学习更是难上加难。为此,充分利用SU建模软件... 《画法几何与阴影透视》课程是建筑学专业的一门重要专业基础课,主要锻炼学生识图和画图的能力,由于学生的三维想象力较差且前期没有专业实践的机会,导致学生学习困难,尤其是阴影透视部分的学习更是难上加难。为此,充分利用SU建模软件制作优质的教学资源库,将其应用于教学,改进教学模式,丰富教学内容,提高学生学习兴趣,解决学生学习的难点,取得了良好的教学效果。 展开更多
关键词 su建模软件 画法几何与阴影透视 教学资源库 教学模式
下载PDF
SUS304奥氏体不锈钢TIG焊电弧增材制造工艺优化
18
作者 贾金龙 张佳 +2 位作者 杜明科 蒋成燕 冯毅 《机械制造文摘(焊接分册)》 2023年第1期1-6,共6页
为探索SUS304奥氏体不锈钢TIG焊电弧增材制造的最佳工艺窗口,采用不同沉积工艺参数对SUS304不锈钢进行单道多层墙体成形试验,试验通过改变电弧移动速度、送丝速度和层间冷却时间,研究其对墙体平均宽度和高度的影响,并考察墙体的金相显... 为探索SUS304奥氏体不锈钢TIG焊电弧增材制造的最佳工艺窗口,采用不同沉积工艺参数对SUS304不锈钢进行单道多层墙体成形试验,试验通过改变电弧移动速度、送丝速度和层间冷却时间,研究其对墙体平均宽度和高度的影响,并考察墙体的金相显微组织和力学性能。结果表明,当热输入保持不变时,电弧移动速度和送丝速度相匹配,才能保证沉积过程的稳定;在保持热输入不变的情况下,随着电弧行走速度的增加,沉积层平均宽度从10.54 mm减小到7.5 mm,平均高度从6.75 mm减小到4.16 mm;随着送丝速度的增加,沉积层的平均宽度和高度均增加,其高度增加大约1 mm;随着层间冷却时间的增加,沉积层平均宽度明显增加,从层间冷却时间为2 min的10.54 mm增加到5 min的11.6 mm,高度变化不大,均在6.5 mm左右;沉积墙体的显微组织出现明显的方向性,主要由大量奥氏体和少量铁素体组成;相比于SUS304母材而言,x和z方向的抗拉强度均有所下降,约为母材的82.5%,且x方向的断后伸长率大于z方向。 展开更多
关键词 suS304奥氏体不锈钢 TIG焊 增材制造 工艺优化
下载PDF
Laparoscopic segmental colectomy for colonic lymphangiomas: A definitive, minimally invasive surgical option 被引量:1
19
作者 Chang-Hua Zhuo De-Bing Shi +5 位作者 Min-Gang Ying Yu-Fan Cheng Yu-Wei Wang Wen-Ming Zhang San-Jun Cai Xin-Xiang Li 《World Journal of Gastroenterology》 SCIE CAS 2014年第26期8745-8750,共6页
Colonic lymphangioma is an unusual benign malformation.We herein describe two cases.A 36-year-old woman was admitted with one year of intermittent abdominal pain;colonoscopy,abdominopelvic computed tomography and endo... Colonic lymphangioma is an unusual benign malformation.We herein describe two cases.A 36-year-old woman was admitted with one year of intermittent abdominal pain;colonoscopy,abdominopelvic computed tomography and endoscopic ultrasonography(EUS)revealed enlarged cystic masses at the ascending colon.In another 40-year-old man,colonoscopy and EUS revealed an asymptomatic lobulated cystic mass with four small sessile polyps at the sigmoid colon.Both patients underwent laparoscopic segmental colectomy.Both masses were histologically confirmed as cystic lymphangiomas,and the patients were discharged without complications.The management of colonic lymphangioma depends on the individual situation;close surveillance or endoscopic therapy may be appropriate for asymptomatic lesions smaller than 2.5 cm in diameter.Surgical intervention can be considered for larger lesions or in patients who develop complication risks.Laparoscopic segmental colon resection may be recommended to excise relatively large submucosal lesions because it is a definitive,minimally invasive intervention with a fast postoperative recovery. 展开更多
关键词 CYSTIC lymphangioma Colon neoplasm LAPAROSCOPIC su
下载PDF
脉冲电流辅助SUS304极薄带拉伸变形研究 被引量:4
20
作者 范婉婉 刘奇 +2 位作者 刘文文 王涛 王天翔 《中国机械工程》 EI CAS CSCD 北大核心 2023年第4期475-480,489,共7页
为了研究脉冲电流对SUS304极薄带拉伸变形的影响,进行了室温拉伸、通电拉伸以及通电空冷拉伸试验,分析了热效应和非热效应对宏观力学性能与微观组织的影响。结果表明,脉冲电流辅助SUS304极薄带拉伸变形过程中热效应和非热效应同时存在,... 为了研究脉冲电流对SUS304极薄带拉伸变形的影响,进行了室温拉伸、通电拉伸以及通电空冷拉伸试验,分析了热效应和非热效应对宏观力学性能与微观组织的影响。结果表明,脉冲电流辅助SUS304极薄带拉伸变形过程中热效应和非热效应同时存在,热效应导致材料流变应力减小,非热效应抑制TRIP效应,促进TWIP效应,改变了材料的塑性变形机制;没有高强度马氏体协调塑性变形,导致试样过早发生失稳断裂,其中试样的抗拉强度降低12.2%,断裂延伸率下降44.7%;同时,非热效应使试样在较低温度下发生了回复和再结晶现象;脉冲电流诱导了SUS304极薄带由韧性断裂向韧脆性断裂模式的转变,并且促进了变形织构生成。 展开更多
关键词 电流辅助加工 suS304极薄带 拉伸变形 TRIP效应
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部