Curved Spine:The Shape of Spine in Taoist Body Diagrams and Its Influence on Medical Body Diagrams

From the early Taoist diagrams of the human body to the end of the Qing dynasty and the beginning of the Republic of China,Taoists exaggerated and deformed the human spine in a shape-shifting manner.It is likely that medical practitioners were influenced by this style of representation,and there are also numerous diagrams of the human body with the curved spine in the lateral-view diagrams of viscera and Ming Tang Tu(明堂图Acupuncture and Moxibustion Chart),which constantly show the human torso in an elliptical“egg shape”.No later than the Ming dynasty,medical practitioners began to depict the actual physiological spinal curve of the human body.By the Qing dynasty,the depiction of the spinal curve in medical diagrams of the human figure showed a tendency to part ways with the Taoist freehand style of the previous generation.Although the representation of the curve of the spine was very crude,later medical images of the human body at least gradually straightened the spine and no longer depicted it in a shape-shifting manner.However,the curved spine in Taoist diagrams of the human body continued to exist,and the presentation of the curved spine never changed.This way of depicting its appearance,which is very different from reality,is shaped by Taoism's special way of perceiving and viewing the body,and may also contain another form of truth.

Phase diagram and quench dynamics of a periodically drivenHaldane model

We investigate a periodically driven Haldane model subjected to a two-stage driving scheme in the form of a step function.By using the Floquet theory,we obtain the topological phase diagram of the system.We also find that anomalous Floquet topological phases exist in the system.Focusing on examining the quench dynamics among topological phases,we analyze the site distribution of the 0-mode and p-mode edge states in long-period evolution after a quench.The results demonstrate that,under certain conditions,the site distribution of the 0-mode can be confined at the edge even in long-period evolution.Additionally,both the 0-mode and p-mode can recover and become confined at the edge in long-period evolution when the post-quench parameters(T,M_(2) /M_(1))in the phase diagram cross away from the phase boundary (M_(2)/ M_(1))=(6√3t2)/ M_(1)−1.Furthermore,we conclude that whether the edge state is confined at the edge in the long-period evolution after a quench depends on the similarity of the edge states before and after the quench.Our findings reveal some new characteristics of quench dynamics in a periodically driven system.

Properties of the phase diagram from the Nambu-Jona-Lasino model with a scalar-vector interaction

We investigated the properties of the phase diagram of high-order susceptibilities,speed of sound,and polytropic index based on an extended Nambu-Jona-Lasinio model with an eight-quark scalar-vector interaction.Non-monotonic behavior was observed in all these quantities around the phase transition boundary,which also revealed the properties of the critical point.Further,this study indicated that the chiral phase transition boundary and critical point could vary depending on the scalarvector coupling constant G_(SV).At finite densities and temperatures,the negative G_(SV)term exhibited attractive interactions,which enhanced the critical point temperature and reduced the chemical potential.The G_(SV)term also affected the properties of the high-order susceptibilities,speed of sound,and polytropic index near the critical point.The non-monotonic(peak or dip)structures of these quantities shifted to a low baryon chemical potential(and high temperature)with a negative G_(SV).G_(SV)also changed the amplitude and range of the nonmonotonic regions.Therefore,the scalar-vector interaction was useful for locating the phase boundary and critical point in QCD phase diagram by comparing the experimental data.The study of the non-monotonic behavior of high-order susceptibilities,speed of sound,and polytropic index is of great interest,and further observations related to high-order susceptibilities,speed of sound,and polytropic index being found and applied to the search for critical points in heavy-ion collisions and the study of compact stars are eagerly awaited.

Recension of boron nitride phase diagram based on high-pressure and high-temperature experiments

Cubic boron nitride and hexagonal boron nitride are the two predominant crystalline structures of boron nitride.They can interconvert under varying pressure and temperature conditions.However,this transformation requires overcoming significant potential barriers in dynamics,which poses great difficulty in determining the c-BN/h-BN phase boundary.This study used high-pressure in situ differential thermal measurements to ascertain the temperature of h-BN/c-BN conversion within the commonly used pressure range(3-6 GPa)for the industrial synthesis of c-BN to constrain the P-T phase boundary of h-BN/c-BN in the pressure-temperature range as much as possible.Based on the analysis of the experimental data,it is determined that the relationship between pressure and temperature conforms to the following equation:P=a+1/bT.Here,P denotes the pressure(GPa)and T is the temperature(K).The coefficients are a=-3.8±0.8 GPa and b=229.8±17.1 GPa/K.These findings call into question existing high-pressure and high-temperature phase diagrams of boron nitride,which seem to overstate the phase boundary temperature between c-BN and h-BN.The BN phase diagram obtained from this study can provide critical temperature and pressure condition guidance for the industrial synthesis of c-BN,thus optimizing synthesis efficiency and product performance.

A Future Life of Binary Phase Diagrams

The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.

M-N相关曲线用于轻骨料混凝土圆形截面偏压构件截面的计算

在全过程理论分析建立的正截面承载力基本方程的基础上,利用计算机程序求解轻骨料混凝土圆形截面偏心受压构件的极限承载能力,讨论并获得了此类构件的弯矩M和轴力N的关系。利用M-N相关曲线进行截面设计,避免求解超越方程,使计算更为简便统一。该法可用于编制轻骨料混凝土圆形截面偏心受压构件截面承载力计算表。

Predominance diagrams for Zn(Ⅱ)-NH_3-Cl^--H_2O system

The thermodynamics in zinc hydrometallurgical process was studied using a chemical equilibrium modeling code（GEMS） to predict the zinc solubility and construct the species distribution and predominance diagrams for the Zn（Ⅱ）-NH3-H2O and Zn（Ⅱ）-NH3-Cl--H2O system.The zinc solubilities in ammoniacal solutions were also measured with equilibrium experiments,which agree well with the predicted values.The distribution and predominance diagrams show that ammine and hydroxyl ammine complexes are the main aqueous Zn species,Zn（NH3）24-is predominant in weak alkaline solution for both Zn（Ⅱ）-NH3-H2O and Zn（Ⅱ）-NH3-Cl--H2O systems.In Zn（Ⅱ）-NH3-Cl--H2O system,the ternary complexes containing ammonia and chloride increase the zinc solubility in neutral solution.There are three zinc compounds,Zn（OH）2,Zn（OH）1.6Cl0.4 and Zn（NH3）2Cl2,on which the zinc solubility depends,according to the total ammonia,chloride and zinc concentration.These thermodynamic diagrams show the effects of ammonia,chloride and zinc concentration on the zinc solubility,which can provide thermodynamic references for the zinc hydrometallurgy.

φ-pH diagram of V-Ti-H_2O system during pressure acid leaching of converter slag containing vanadium and titanium

To analyze the thermodynamic characteristics of leaching process of converter slag, φ-pH diagram of V-Ti-H2O system at oxygen partial pressure of 0.5 MPa, ionic mass concentration of 0.1 mol/kg and temperatures ranging from 60 to 200 ℃ was obtained by recently published critically assessed standard Gibbs energies and activity coefficients of various species. When pH2, stable regions of V3＋, VO2＋ and VO2＋ exist in the stable region of TiO2. The pH values of stable regions of vanadium and titanium decrease and redox potentials become more positive with the temperature increasing. Vanadium and titanium could be separated by one-step leaching based on thermodynamics. The experiment results of pressure acid leaching of converter slag show that leaching rates of vanadium and titanium are 96.87% and 8.76% respectively, at 140 ℃ of temperature, 0.5 MPa of oxygen partial pressure, 0.055-0.075mm of particle size, 15：1 of liquid to solid ratio, 120 min of leaching time, 500 r/min of stirring speed and 200 g/L of initial acid concentration. Vanadium and titanium could be selectively separated in the pressure acid leaching process, and the experiment result is in agreement with thermodynamic calculation result.

含M-N型参数的不分明自回归预测模型

将经典的ｎ阶自回归预测模型扩展为含Ｍ－Ｎ型参数的不分明自回归预测模型。

Theoretical prediction of forming limit diagram of AZ31 magnesium alloy sheet at warm temperatures

A theoretical prediction on forming limit diagram（FLD） of AZ31 magnesium alloy sheet was developed at warm temperatures based on the M-K theory. Two different yield criteria of von Mises and Hill＇48 were applied in this model. Mechanical properties of AZ31 magnesium alloy used in the prediction were obtained by uniaxial tensile tests and the Fields-Backofen equation was incorporated in the analysis. In addition, experimental FLDs of AZ31 were acquired by conducting rigid die swell test at different temperatures to verify the prediction. It is demonstrated from a comparison between the predicted and the experimental FLDs at 473 K and 523 K that the predicted results are influenced by the type of yield criterion used in the calculation, especially at lower temperatures. Furthermore, a better agreement between the predicted results and experimental data for AZ31 magnesium alloy sheet at warm temperatures was obtained when Hill＇48 yield criterion was applied.

Plotting and application of predominance area diagram of In-S-O system based on topological rules

The mathematical topological rule was proposed to plot the predominance area diagram.Based on the phase rules,the components of In-S-O system were analyzed and the coexisting points of three condensed phases were determined.Combined with the topological rules and thermody namic calculation,four relation diagrams between the coexisting points of three condensed phases,which were denoted as α,β stable plane-topological diagram and unstable plane-topological diagram,were plotted for the In-S-O system.The results show that α stable plane topological diagram is in accordance with the predominance area diagram of In-S-O system plotted by traditional methods,which indicates that the new method is feasible to plot the predominance area diagram of In-S-O system.Meanwhile,β unstable plane-topological diagram can be used to elucidate the indium production with the bath smelting process.

CAUSALITY DIAGRAM BASED SAFETY ANALYSIS OF MICRO TURBOJET ENGINE

An improved safety analysis based on the causality diagram for the complex system of micro aero-engines is presented.The study is examined by using the causality diagram in analytical failure cases due to rupture or pentration in the receiver of micro turbojet engine casing,and the comparisons are also made with the results from the traditional fault tree analysis.Experimental results show two main advantages：（1）Quantitative analysis which is more reliable for the failure analysis in jet engines can be produced by the causality diagram analysis;（2）Graphical representation of causality diagram is easier to apply in real test cases and more effective for the safety assessment.

Evaluation of supply chain default risk based on fuzzy influence diagram

After introducing the supply chain default risk and its causes,based on the literature review of the evaluation methods of supply chain risks,a new evaluation method called the fuzzy influence diagram which combines fuzzy sets with influence diagram theory and considers the interaction among risk factors is proposed.Furthermore,an evaluation model of the supply chain default risk is established based on the research of default risk evaluation and the fuzzy influence diagram.First,the model takes the loss of risk as a valuable node,risk factors as random nodes,drawing a risk analysis influence diagram.Then,three kinds of fuzzy sets are defined,including state fuzzy sets,probabilistic fuzzy sets and a relation fuzzy matrix.Finally,by using the fuzzy algorithm to evaluate nodes,the probability of risk occurrence and the degrees of risk loss are obtained.On the basis of the model,an instance application is used to prove its utility and effectiveness.

Holographic alloy positioning design system and holographic network phase diagrams of Au-Cu system

Taking Au?Cu system as an example, three discoveries and two methods were presented. First, a new way for boosting sustainable progress of systematic metal materials science (SMMS) and alloy gene engineering (AGE) is to establish holographic alloy positioning design (HAPD) system, of which the base consists of measurement and calculation center, SMMS center, AGE center, HAPD information center and HAPD cybernation center; Second, the resonance activating-sychro alternating mechanism of atom movement may be divided into the located and oriented diffuse modes; Third, the equilibrium and subequilibrium holographic network phase diagrams are blueprints and operable platform for researchers to discover, design, manufacture and deploy advanced alloys, which are obtained respectively by the equilibrium lever numerical method and cross point numerical method of isothermal Gibbs energy curves. As clicking each network point, the holographic information of three structure levels for the designed alloy may be readily obtained: the phase constitution and fraction, phase arranging structure and properties of organization; the composition, alloy gene arranging structure and properties of each phase and the electronic structures and properties of alloy genes. It will create a new era for network designing advanced alloys.

基于m-n变进制规则的动态图软件水印算法

针对软件水印分存算法恢复缓慢、数据扩张的缺点,提出一种基于m-n变进制规则的动态图软件水印算法,利用水印信息、m-n变进制数、排列数与置换图之间的对应关系,实现水印的分存和编码。当水印嵌入时,根据变进制规则将水印信息分存为一组变进制数,构造一个完美哈希函数将变进制数映射为对应的排列数,把得到的排列数编码为置换图结构嵌入到程序的执行代码中,水印提取是水印嵌入的逆过程。实验结果表明,该算法能减小程序的负载,降低水印嵌入和提取的时间复杂度,增强水印的隐蔽性和纠错能力。

Solubility and phase diagrams of hydroxyl manganese chloride

In the course of the basic research on the ammonia-evaporation reaction of manganese monoxide （MnO）, hydroxyl manganese chloride （Mn2（OH）3Cl） was found. The solubility and phase diagrams of the hydroxyl manganese chloride were investigated. The aqueous thermostat and vibrating bed were used to determine the solubility of hydroxyl manganese chloride in water, ammonium chloride and manganese chloride system, and the phase diagrams of multicomponent system were drawn. The research results indicate that hydroxyl manganese chloride has been produced in laboratory and is in favor of the solid-liquid separation at high temperature.

Establishment of continuous cooling transformation diagrams of aluminum alloys using in situ voltage measurement

An effective method was proposed to establish the continuous cooling transformation（CCT） diagrams of aluminum alloys using in situ voltage measurement.The voltage change of samples with predefined dimension was recorded under the constant current state during continuous cooling.Solutionizing time,together with starting and finishing temperatures of phase transformation of the alloy can be obtained from relationships of voltage vs time and temperature.A critical cooling rate without detectable phase transition during continuous cooling can be determined.Continuous cooling transformation diagrams of tested samples can be established conveniently based on these results.Microstructure observation and differential scanning calorimetry（DSC） testing were applied to verify the reliability of continuous cooling transformation diagram.

Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of AuCu_3-type sublattice system

Taking AuCu3-type sublattice system as an example, three discoveries have been presented: First, the third barrier hindering the progress in metal materials science is that researchers have got used to recognizing experimental phenomena of alloy phase transitions during extremely slow variation in temperature by equilibrium thinking mode and then taking erroneous knowledge of experimental phenomena as selected information for establishing Gibbs energy function and so-called equilibrium phase diagram. Second, the equilibrium holographic network phase diagrams of AuCu3-type sublattice system may be used to describe systematic correlativity of the composition?temperature-dependent alloy gene arranging structures and complete thermodynamic properties, and to be a standard for studying experimental subequilibrium order-disorder transition. Third, the equilibrium transition of each alloy is a homogeneous single-phase rather than a heterogeneous two-phase, and there exists a single-phase boundary curve without two-phase region of the ordered and disordered phases; the composition and temperature of the top point on the phase-boundary curve are far away from the ones of the critical point of the AuCu3 compound.

Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of Au_3Cu-type sublattice system

Taking Au3Cu-type sublattice system as an example, three discoveries have been presented. First, the fourth barrier to hinder the progress of metal materials science is that today’s researchers do not understand that the Gibbs energy function of an alloy phase should be derived from Gibbs energy partition function constructed of alloy gene sequence and their Gibbs energy sequence. Second, the six rules for establishing alloy gene Gibbs energy partition function have been discovered, and it has been specially proved that the probabilities of structure units occupied at the Gibbs energy levels in the degeneracy factor for calculating configuration entropy should be degenerated as ones of component atoms occupied at the lattice points. Third, the main characteristics unexpected by today’s researchers are as follows. There exists a single-phase boundary curve without two-phase region coexisting by the ordered and disordered phases. The composition and temperature of the top point on the phase-boundary curve are far away from those of the critical point of the Au3Cu compound; At 0 K, the composition of the lowest point on the composition-dependent Gibbs energy curve is notably deviated from that of the Au3Cu compounds. The theoretical limit composition range of long range ordered Au3Cu-type alloys is determined by the first jumping order degree.

Study of macroscopic fundamental diagram on Shanghai urban expressway network in China

The macroscopic fundamental diagram（ MFD） is studied to obtain the aggregate behavior of traffic in cities. This paper investigates the existence and the characteristics of different types of daily MFD for the Shanghai urban expressway network. The existence of MFD in the Shanghai urban expressway network is proved based on two weeks＇ data.Moreover, the hysteresis phenomena is present in most days and the network exhibits different hysteresis loops under different traffic situations. The relationship between the hysteresis phenomena and the inhomogeneity of traffic distribution is verified. The MFDs in the years of 2009 and 2012 are compared. The hysteresis loop still exists in 2012, which further verifies the existence of the hysteresis phenomenon. The direct relationship between the length of the hysteresis loop（ ΔO） and the congestion is proved based on sufficient data. The width of the hysteresis loop, i. e., the drop in network flow（ ΔQ） has no relationship with the congestion, and it varies from day to day under different traffic situations.