Upper crustal velocity and seismogenic environment of the M7.0 Jiuzhaigou earthquake region in Sichuan, China

On August 8,2017,a magnitude 7.0 earthquake occurred in Jiuzhaigou County,Sichuan Province,China.The deep seismogenic environment and potential seismic risk in the eastern margin of Tibetan Plateau have once again attracted the close attention of seismologists and scholars at home and abroad.The post-earthquake scientific investigation could not identify noticeable surface rupture zones in the affected area;the complex tectonic background and the reason(s)for the frequent seismicity in the Jiuzhaigou earthquake region are unclear.In order to reveal the characteristics of the deep medium and the seismogenic environment of the M7.0 Jiuzhaigou earthquake region,and to interpret the tectonic background and genesis of the seismicity comprehensively,in this paper,we have reviewed all available observation data recorded by the regional digital seismic networks and large-scale,dense mobile seismic array(China Array)for the northern section of the North-South Seismic Belt around Jiuzhaigou earthquake region.Using double-difference seismic tomography method to invert the three-dimensional P-wave velocity structure characteristics of the upper crust around the Jiuzhaigou earthquake region,we have analyzed and discussed such scientific questions as the relationship between the velocity structure characteristics and seismicity in the Jiuzhaigou earthquake region,its deep tectonic environment,and the ongoing seismic risk in this region.We report that:the P-wave velocity structure of the upper crust around the Jiuzhaigoug earthquake region exhibits obvious lateral inhomogeneity;the distribution characteristics of the shallow P-wave velocity structure are closely related to surface geological structure and formation lithology;the M7.0 Jiuzhaigou earthquake sequence is closely related to the velocity structure of the upper crust;the mainshock of the M7.0 earthquake occurred in the upper crust;the inhomogeneous variation of the velocity structure of the Jiuzhaigou earthquake area and its surrounding medium appears to be the deep structural factor controlling the spatial distribution of the mainshock and its sequence.The 3D P-wave velocity structure also suggests that the crustal low-velocity layer of northeastern SGB(Songpan-GarzêBlock)stretches into MSM(Minshan Mountain),and migrates to the northeast,but the tendency to emerge as a shallow layer is impeded by the high-velocity zone of Nanping Nappe tectonics and the Bikou Block.Our results reveal an uneven distribution of high-and low-velocity structures around the Tazang segment of the East Kunlun fault zone.Given that the rupture caused by the Jiuzhaigou earthquake has enhanced the stress fields at both ends of the seismogenic fault,it is very important to stay vigilant to possible seismic hazards in the large seismic gap at the Maqu-Maqên segment of the East Kunlun fault zone.

The 2024 M_(j) 7.6 Noto Peninsula, Japan earthquake caused by the fluid flow in the crust

On January 1, 2024 at 16:10:09 JST, an M_(j) 7.6 earthquake struck the Noto Peninsula in the southern part of the Sea of Japan. This location has been experiencing an earthquake swarm for more than three years. Here, we provide an overview of this earthquake, focusing on the slip distribution of the mainshock and its relationship with the preceding swarm. We also reexamined the source areas of other large earthquakes that occurred around the Sea of Japan in the past and compared them with the Matsushiro earthquake swarm in central Japan from1964 to 1968. The difference between the Matsushiro earthquake swarm and the Noto earthquake swarm is the surrounding stress field. The Matsushiro earthquake swarm was a strike-slip stress field, so the cracks in the crust were oriented vertically. This allowed fluids seeped from the depths to rise and flow out to the surface. On the other hand, the Noto area was a reverse fault stress field. Therefore, the cracks in the earth's crust were oriented horizontally. Fluids flowing underground in deep areas could not rise and spread over a wide area in the horizontal plane. This may have caused a large amount of fluid to accumulate underground, triggering a large earthquake. Although our proposed mechanism does not take into account other complex geological conditions into consideration, it may provide a simple way to explain why the Noto swarm is followed by a large earthquake while other swarms are not.

Astronomic background of global huge earthquakes at beginning of 21st century

Since the beginning of the 21st century,major earthquakes have frequently occurred worldwide.To explore the impact of astronomical factors on earthquakes,in this study,the statistical analysis method of correlation is used to systematically analyze the effects of astronomical factors,such as solar activity,Earth’s rotation,lunar declination angle,celestial tidal force,and other phenomena on M≥8 global earthquakes at the beginning of the 21st century.With regard to solar activity,this study focuses on the analysis of the 11-year and century cycles of solar activity.The causal relationship of the Earth’s rotation is not obvious in this work and previous works;in contrast,the valley period of the solar activity century cycle may be an important astronomical factor leading to the frequent occurrence of global earthquakes at the beginning of the 21st century.This topic warrants further study.

2023-08-23辽宁普兰店M 4.6地震震源参数测定及发震构造初判

2023-08-2318:19辽宁省大连市普兰店区发生M 4.6地震,为准确描述本次地震的震源特征,探讨其孕育和发震机理,本文通过测定地震的震源深度,反演震源机制、矩张量及质心深度,给出震源机制中心解;同时分析震源机制与构造应力场的关系,根据小震重定位结果对发震断层面进行拟合,初步确定了本次地震的发震断层。结果表明,普兰店M 4.6地震初始破裂深度为12.0 km,震源机制解参数为节面Ⅰ走向50°,倾伏角75°,滑动角-169°;节面Ⅱ走向317°,倾伏角80°,滑动角-15°,矩震级M W4.8,最优质心深度12 km;地震矩M_(0)为1.796×10^(16)Nm,矩张量解M_(rr)、M_(tt)、M_(pp)、M_(rt)、M_(rp)、M_(tp)分别为-0.004、0.946、-0.942、0.017、-0.305、-0.125;中心解参数为节面Ⅰ走向47.03°,倾伏角79.04°,滑动角-168.15°;节面Ⅱ走向314.75°,倾伏角78.37°,滑动角-11.19°。构造应力场作用在中心解节面Ⅰ上的相对剪应力为0.877,相对正应力为-0.544;投影于节面Ⅱ上的相对剪应力为0.911,相对正应力为0.161。拟合的断层面走向148.91°,倾伏角89.85°,其在构造应力体系下的滑动角为26.47°。综合分析认为,普兰店M 4.6地震发生在NW向普兰店-长海构造带,是沿应力场最优节面以左旋走滑为错动方式的天然地震。

2017年8月8日九寨沟M7.0地震及余震震源机制解与发震构造分析

2017年8月8日在青藏高原东缘四川省九寨沟县发生M7.0级强烈地震,极震区烈度达Ⅸ度,但无明显地表破裂,一定程度上限制了发震构造的确定和后续地震危险性判定.本文基于截止至2017年8月14日的地震资料,采用多阶段定位方法,对主震及余震进行了重新定位,同时,利用CAP波形反演方法,获得了M7.0主震与13次M_L≥4.0级余震的震源机制解和震源矩心深度,进而初步分析了本次地震的发震构造.结果显示,九寨沟M7.0地震的矩震级M_w6.4,震源矩心深度5 km,表明主震发生在上地壳浅部,与2003年伊朗巴姆(Bam)M_w6.5地震特征极为相似;12次M_L≥4.0级余震的震源矩心深度6~12 km,显示这些余震发生在主震下部,仅1次例外.重新定位后的余震震中呈NW-SE向窄带展布,位于近NS向的岷江断裂与近EW向的东昆仑断裂带东端分支塔藏断裂所夹持的区域,余震带长轴长约38 km,主震位于余震带中部.根据余震震中分布、主震及余震震源机制解等,推测本次九寨沟M7.0地震及其余震的主发震构造为位于岷江断裂与塔藏断裂之间的树正断裂.震源机制解揭示,树正断裂呈左旋走滑,走向约152°,近SE,倾向SW,倾角约70°,该断裂应属于东昆仑断裂东端的分支断裂之一,或与东南侧的虎牙断裂构成统一断裂系.

Preliminary analysis on characteristics of coseismic deformation associated with M_S=8.1 western Kunlunshan Pass earthquake in 2001

Based on the analysis of coseismic deformation in the macroscopic epicentral region extracted by Differential Interferometric Synthetic Aperture Radar (D-InSAR), and combined with the seismic activity, focal mechanism solutions of the earthquake and field investigation, the characteristic of coseismic deformation of MS=8.1 western Kunlunshan Pass earthquake in 2001 was researched. The study shows that its epicenter lies in the northeast side of Hoh Sai Hu; and the seismogenic fault in the macroscopic epicentral region can be divided into two central deformation fields: the west and east segments with the lengths of 42 km and 48 km, respectively. The whole fault extends about 90 km. From the distribution of interferometry fringes, the characteristic of sinistral strike slip of seismogenic fault can be identified clearly. The deformations on both sides of the fault are different with an obviously higher value on the south side. In the vicinity of macroscopic epicenter, the maximum displacement in look direction is about 288.4 cm and the minimum is 224.0 cm; the maximum sinistral horizontal dislocation of seismogenic fault near the macroscopic epicenter is 738.1 cm and the minimum is 551.8 cm.

Quantitative data about active tectonics and possible locations of strong earthquakes in the future in the northwestern Beijing

Deterministic, probabilistic and composite-grading methods are used to get the possible locations of strong earth-quakes in the future in Norwest Beijing and its vicinity based on the quantitative data and their accuracy about active tectonics in the research area and by ordering, some questions in the results are also discussed. It shows that the most dangerous fault segments for strong earthquakes in the future include: segments B and A of the southern boundary fault of the Yangyuan basin, the southern boundary fault of the Xuanhua basin, the east segment of the southern Huaian fault and the east segment of the northern YanggaoTianzhen fault. The most dangerous area is YangyuanShenjing basin, the second one is TianzhenHuaianXuanhua basin and the third dangerous areas are WanquanZhangjiakou and northeast of Yuxian to southwest of Fanshan.

2017年8月九寨沟M7.0地震序列断层结构及构造应力场特征

2017年8月8日四川省九寨沟县发生M7. 0地震,截至2017年10月15日共发生M1. 0以上地震2 099次。文中采用双差定位法对九寨沟地震序列进行重新定位,获得了1 565个地震的精定位结果,利用CAP(Cut and Paste)方法获得了24个3级以上地震的震源机制解,利用滑动拟合方法反演了此次九寨沟M7. 0地震的构造应力场,并结合前人对该区域地震地质的研究成果,探讨了九寨沟M7. 0地震的发震断层结构和构造应力场特征。研究结果显示:1)九寨沟M7. 0地震序列震中沿NW-SE向呈条带状分布,长轴约35km,短轴约8km,震源主要集中分布在深度2～25km范围内,且沿断层走向由NW向SE逐渐变深,震源断层倾角较高,倾向SW,沿整个断层倾角没有发生明显变化; 2)九寨沟M7. 0地震的震源机制解节面I的走向、倾角和滑动角为152°、71°和-11°,节面Ⅱ的走向、倾角和滑动角为246°、80°和-161°,主震为纯走滑型地震,矩心深度约5km,余震序列的震源机制解绝大多数为走滑型,与主震震源机制解性质基本一致; 3)震源区主压应力、主张应力倾角接近水平,主压应力方向近EW向,主张应力近SN向,九寨沟地震是在水平挤压应力作用下发生的走滑运动。

Geometry and tectonic deformation of the seismogenic structure for the 8 August 2017 M_S 7.0 Jiuzhaigou earthquake sequence,northern Sichuan, China

To reveal the geometry of the seismogenic structure of the Aug. 8, 2017 M_S 7.0 Jiuzhaigou earthquake in northern Sichuan,data from the regional seismic network from the time of the main event to Oct. 31, 2017 were used to relocate the earthquake sequence by the tomoDD program, and the focal mechanism solutions and centroid depths of the M_L ≥ 3.5 events in the sequence were determined using the CAP waveform inversion method. Further, the segmental tectonic deformation characteristics of the seismogenic faults were analyzed preliminarily by using strain rosettes and areal strains(As). The results indicate:(1) The relocated M_S 7.0 Jiuzhaigou earthquake sequence displays a narrow ～ 38 km long NNW-SSE-trending zone between the NW-striking Tazang Fault and the nearly NSstriking Minjiang Fault, two branches of the East Kunlun Fault Zone. The spatial distribution of the sequence is narrow and deep for the southern segment, and relatively wide and shallow for the northern segment. The initial rupture depth of the mainshock is 12.5 km, the dominant depth range of the aftershock sequence is between 0 and 10 km with an average depth of 6.7 km. The mainshock epicenter is located in the middle of the aftershock region, showing a bilateral rupture behavior. The centroid depths of 32 M_L ≥ 3.5 events range from 3 to 12 km with a mean of about 7.3 km, consistent with the predominant focal depth of the whole sequence.(2) The geometric structure of the seismogenic fault on the southern section of the aftershock area(south of the mainshock) is relatively simple, with overall strike of ～150° and dip angle ～75°, but the dip angle and dip-orientation exhibit some variation along the segment. The seismogenic structure on the northern segment is more complicated; several faults, including the Minjiang Fault, may be responsible for the aftershock activities. The overall strike of this section is ～159° and dip angle is ～59°, illustrating a certain clockwise rotation and a smaller dip angle than the southern segment. The differences between the two segments demonstrate variation of the geometric structure along the seismogenic faults.(3) The focal mechanism solutions of 32 M_L ≥ 3.5 events in the earthquake sequence have obvious segmental characteristics. Strike-slip earthquakes are dominant on the southern segment, while 50% of events on the northern segment are thrusting and oblique thrusting earthquakes, revealing significant differences in the kinematic features of the seismogenic faults between the two segments.(4) The strain rosettes for the mainshock and the entire sequence of 31 M_L ≥ 3.5 aftershocks correspond to strike-slip type with NWW-SEE compressional white lobes and NNE-SSW extensional black lobes of nearly similar size. The strain rosette and As value of the entire sequence of 22 M_L ≥ 3.5 events on the southern segment are the same as those of the M_S 7.0 mainshock,indicating that the tectonic deformation here is strike-slip. However, the strain rosette of the entire sequence of 10 M_L ≥ 3.5 events on the northern segment show prominent white compressional lobes and small black extensional lobes, and the related As value is up to 0.52,indicating that the tectonic deformation of this segment is oblique thrusting with a certain strike-slip component. Differences between the two segments all reveal distinctly obvious segmental characteristics of the tectonic deformation of the seismogenic faults for the Jiuzhaigou earthquake sequence.

Fault plane parameters of Tancheng M81/2 earthquake on the basis of present-day seismological data

The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area. We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method. The inversion results are as follows： the strike is 21.6°, the dip angle is 89.5°, the slip angle is 170°, the fault length is about 160 km, the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km. This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust. Moreover, the surface seismic fault, intensity distribution of the earthquake, earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.

Surface rupture zone of the 1303 Hongtong M=8 earthquake, Shanxi Province

Based on the latest displacement of Huoshan piedmont fault, Mianshan west-side fault and Taigu fault obtained from the beginning of 1990s up to the present, the characteristics of distribution and displacement of surface rup-ture zone of the 1303 Hongtong M = 8 earthquake, Shanxi Province are synthesized and discussed in the paper. If Taigu fault, Mianshan west-side fault and Huoshan piedmont fault were contemporarily active during the 1303 Hongtong M = 8 earthquake, the surface rupture zone would be 160 km long and could be divided into 3 segments, that is, the 50-km-long Huoshan piedmont fault segment, 35-km-long Mianshan west-side fault segment and 70-km-long Taigu fault segment, respectively. Among them, there exist 4 km and 8 km step regions. The surface rupture zone exhibits right-lateral features. The displacements of northern and central segments are respectively 6~7 m and the southern segment has the maximum displacement of 10 m. The single basin-boundary fault of Shanxi fault-depression system usually corresponds to M 7 earthquake, while this great earthquake (M = 8) broke through the obstacle between two basins. It shows that the surface rupture scale of great earthquake is changeable.

Calculation of the parameters of georesistivi－ty anisotropy and case history of earthquake precursors

This paper has discussed the effective resistivity ellipse and the paradoxical phenomenon of anisotropy. Two cases have been discussed, namely: there are three measuring lines at arbitrary angles with one another and there are two mutually perpendicular measuring lines and an additional measurement of the transversal effective resistivity. For these cases, the paper has given the methods for quantitatively calculating the parameters of georesistivity anisotropy. The formulae given include those for calculating the azimuth (of the principal axis of minimum resistivity ρ 1, the average resistivity ( ρ 1ρ 3) 1/2 , (ρ 2ρ 3) 1/2 , and the anisotropy coefficient λ=(ρ 2/ρ 1 ) 1/2 . As a case history, the data observed by the Datong geoelectricity station have been processed with reference to the results of in situ resistivity measurement in media subjected to shear. The results of analysis have led to the following understandings. Before and after the Datong M S6.1 earthquake on October 19, 1989, the abnormal rise of NE trending georesistivity and abnormal fall of NW trending georesistivity observed at the Datong and Yangyuan stations were caused by the pure shear acting on the medium. The major principal compression was in NE direction, which made an acute angle with the strike of the seismic fault plane, and thus there was a greater shear stress but very small normal stress so that the fault was likely to slide but the earthquake was only of moderate magnitude. The states of stress in medium were the same before and after earthquake and therefore the georesistivity precursor was of the same sign as that of co seismic variations.

Fault plane parameters of Sanhe-Pinggu M8 earthquake in 1679 determined using present-day small earthquakes

The great Sanhe-Pinggu M8 earthquake occurred in 1679 was the largest surface rupture event recorded in history in the northern part of North China plain. This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area. We relocated those earthquakes with the double-difference method. Based on the assumption that clustered small earthquakes often occur in the vicinity of fault plane of large earthquake, and referring to the morphology of the long axis of the isoseismal line obtained by the predecessors, we selected a strip-shaped zone from the relocated earthquake catalog in the period from 1980 to 2009 to invert fault plane parameters of this earthquake. The inversion results are as follows： the strike is 38.23°, the dip angle is 82.54°, the slip angle is -156.08°, the fault length is about 80 km, the lower-boundary depth is about 23 km and the buried depth of upper boundary is about 3 kin. This shows that the seismogenic fault is a NNE-trending normal dip-slip fault, southeast wall downward and northwest wall uplift, with the right-lateral strike-slip component. Moreover, the surface rupture zone, intensity distribution of the earth-quake and seismic-wave velocity profile in the focal area all verified our study result.

Which velocity model is more suitable for the 2017 M_S7.0 Jiuzhaigou earthquake?

On Aug.8, 2017, an M_S 7.0 earthquake struck Jiuzhaigou, a county of Sichuan province, China. A number of investigations and studies have been conducted, some of which involved local velocity models. However, the suitability of these models has not been properly addressed. Here we collect 11 already-existing models, including those used in studies of the 2017 M_S 7.0 Jiuzhaigou earthquake,choose 10 local stations surrounding the earthquake, and employ the same technique(TRIT) to relocate the hypocenter. And furthermore, we choose a more suitable model from the 11 already-existed models by analyzing the relocation process and the relocated results for reasonability. Finally, our conclusion is that the model Fang 2018 is more suitable and the hypocenter parameters, 103.801°E,33.192°N and 15.8 km for longitude, latitude and depth, respectively, and 2017-08-08 13:19:46.66 for its origin time, based on this model should be recommended for the 2017 M_S7.0 Jiuzhaigou earthquake.

Directional seismic response to the complex topography:A case study of 2013 Lushan Ms 7.0 earthquake

Azimuthal variations in site response can provide a good insight into the site amplification and seismic conditions of geohazard occurrences.In this study,multiple directional site response methods,including D-Arias(Directional-Arias),D-SER(Directional-Shaking energy ratio),D-HVSR(Directional-Horizontal to vertical spectral ratio)and D-SSR(Directional–Standard spectral ratio),are adopted to analyse seismic data of the 2013 Lushan Ms 7.0 earthquake captured by the self-established Lengzhuguan(LZG)station which consists of the complex topography of isolated ridge,large mountain and some typical micro-reliefs.The results show that the isolated ridge could cause stronger site responses than the large mountain,and whose pronounced response direction is roughly perpendicular to its ridgeline.With the growth of elevation,the siteresonant frequency decreases.The different microreliefs on the mountain cause different site responses,which present as protruding slope>linear slope.The site response mainly exists on the surficial layer of the mountain and shows that with the increase of the distance to mountain surface,the site response gets weaker,the site resonant frequency gets higher,and the pronounced response direction is perpendicular to its ridgeline.

Study on the focal mechanism of the M5. 1 Badong earthquake in Hubei

The focal mechanism solutions of the MS. 1 Badong earthquake and subsequent 34 aftershocks at ML 2.0 or more were calculated using the P-wave first motion method; the main earthquake was normal fault dip slip type, and the slip types of the seismogenic rupture surfaces of the subsequent aftershocks primarily include normal dip slip （14 times）, reverse dip slip （9 times）, normal strike slip （9 times） and reverse strike slip （2 times）. The MS. 1 Badong earthquake activities may be related to the stress adjustment caused by the rise of the groundwater level and the decrease of the frictional resistance between structural planes of rock forma- tions due to the effect of reservoir water penetration, and related to the joint activities of the NE-strike Gaoqiao fault and the near EW-strike Daping fault.

Near-field surface deformation during the April 20,2013,Ms7.0 Lushan earthquake measured by 1-Hz GNSS

The April 20, 2013, Ms7.0 Lushan earthquake was successfully recorded by closely spaced Continuous Global Positioning System （CGPS） stations owned by the Crustal Movement Observation Network of Chi- na （CMONC）. The 1-Hz GNSS data from eight CGPS stations, which are located between 30 km and 200 km from the hypocenter, were processed within quasi-real-time. The near-field surface deformation indicated the following characteristics ： the near-field movements were limited to several centimeters ; the peak of the deformation wave was significantly larger than the static permanent offset; at the beginning of the event, the north wall of the fault moved to the southeast as the south wall moved to the southwest ; station SCTQ, which was the closest station to the hypocenter at 30 km, had the largest static permanent displacement of 2 cm; the peaks of the deformation waves were 1.5 cm, 5 cm and 3 cm, to the east, the south and vertically upward, respectively ; and the peaks of velocity and acceleration, derived from the deformation, were 3.4 cm/s and 5.3 cm/s^2,respectively.

Pre-seismic and Co-seismic Crustal Movements of the M 7.3 Kyushu Earthquake on April 16,2016 in Japan

The time series of coordinates of a large number of GPS stations in the world,processed by Prof. Geoffrey Blewitt with GIPSY software are available at http://geodesy. unr. edu.Based on the time series of coordinates in the global reference frame of IGS08 at more than250 stations of continuous GPS observations,downloaded from the website,the co-seismic displacements of the M7. 3 Kyushu earthquake on April 16,2016 in Japan and the preseismic strain accumulations and displacements in the regional reference frame were obtained. The station of continuous GPS observation at BJFS near Beijing has been quite stable in displacement in the eastern part of China for more than 17 years since the beginning of its operation,and this station is used as the core station in the regional reference frame for the pre-seismic displacement of the Kyushu earthquake of M7. 3. The main feature of the pre-seismic displacements of the Kyushu earthquake is characterized by locking in the crust at and near the epicenter. The anomalous pre-seismic strain accumulation developed in an area of anomalous accumulation of the shear strain component of γ1 on the northeast side of the epicenter,with increasing size of the area and increasing magnitude in γ1. The largest area covered by the anomalous γ1 is about 2000 km2. The change in the E component at BJFS since November 26,2015 was caused by the replacement of the receiver and the antenna at the station. In order to study the shortterm change in displacements at stations at and near the epicenter,the time series at 3 stations with continuous GPS observations,2 at SUWN and DAEJ in south Korea and 1 at BJSH near Beijing were analyzed. The analysis shows that the displacements at the 3 stations have been quite stable in the same manner in east Asia. Thus,BJSH is used as the core station in the regional reference frame of displacement and the displacement time series show that there were no significant short term anomalies before the earthquake.

Using Airgun Source Signals to Study Regional Wave Velocity Changes before and after the Yunlong M_S5.0 and Yangbi M_S5.1 Earthquakes

On the basis of the airgun source signals recorded by the stations from January,2016 to June,2017,we use cross-correlation detection technology to obtain the characteristics of the stable phase travel time change of each station.We used the Yunlong MS5.0 and Yangbi MS5.1 earthquakes as samples.According to regional characteristics,13 stations with high signal-to-noise ratios and complete data were selected(including 3 fixed stations and 10 active source stations).They are divided into four regions,and on the basis of the GNSS baseline data,the characteristics of regional wave velocity changes before and after the earthquake are analyzed.The results show that the station phase travel time change and the regional stress characteristics represented by the GNSS baseline data have good correlation in the short-term.Due to different degrees of regional stress,there are differences in the travel time changes of different stations in the four regions.Before the Yunlong MS5.0 and Yangbi MS5.1 earthquakes,with regional stress adjustment,there is an upward trend in the travel time changes of related stations in the adjacent areas of up to 0.02 s.The difference is that there are differences in the time nodes and duration of the travel time anomalies,and there is a reverse descent process after the Yangbi MS5.1 earthquake.There are different degrees of travel time fluctuations in the relevant stations before and after the two earthquakes,but the fluctuation range before and after the earthquake was small.Compared with the water level change of the reservoir,the adjustment of the regional stress is more likely to have a substantial impact on the travel time changes of the relevant stations.

The GIS and analysis of earthquake damage distribution of the 1303 Hongtong M=8 earthquake

The geography information system of the 1303 Hongtong M=8 earthquake has been established. Using the spatial analysis function of GIS, the spatial distribution characteristics of damage and isoseismal of the earthquake are studied. By comparing with the standard earthquake intensity attenuation relationship, the abnormal damage dis-tribution of the earthquake is found, so the relationship of the abnormal distribution with tectonics, site condition and basin are analyzed. In this paper, the influence on the ground motion generated by earthquake source and the underground structures near source also are studied. The influence on seismic zonation, anti-earthquake design, earthquake prediction and earthquake emergency responding produced by the abnormal density distribution are discussed.