Exploring the effect of cooling rate on non-isothermal crystallization of copolymer polypropylene by fast scanning calorimetry

Polypropylene is commonly used as a binder for ceramic injection molding,and rapid cooling is often encountered during processing.However,the crystallization behavior of polypropylene shows a strong dependence on cooling rate due to its semi-crystalline characteristics.Therefore,the influence of cooling rate on the quality of final product cannot be ignored.In this study,the fast differential scanning calorimetry(FSC)test was performed to study the influence of cooling rate on the non-isothermal crystallization behavior and non-isothermal crystallization kinetics of a copolymer polypropylene(PP BC03B).The results show that the crystallization temperatures and crystallinity decrease as the cooling rate increases.In addition,two exothermic peaks occur when cooling rate ranges from 30 to 300 K·s^(-1),indicating the formation of another crystal phase.Avrami,Ozawa and Mo equations were used to explore the non-isothermal crystallization kinetics,and it can be concluded that the Mo method is suitable for this study.

A Non-parametric Gradient-Based Shape Optimization Approach for Solving Inverse Problems in Directed Self-Assemblyof Block Copolymers

We consider the inverse problem of finding guiding pattern shapes that result in desired self-assembly morphologies of block copolymer melts.Specifically,we model polymer selfassembly using the self-consistent field theory and derive,in a non-parametric setting,the sensitivity of the dissimilarity between the desired and the actual morphologies to arbitrary perturbations in the guiding pattern shape.The sensitivity is then used for the optimization of the confining pattern shapes such that the dissimilarity between the desired and the actual morphologies is minimized.The efficiency and robustness of the proposed gradient-based algorithm are demonstrated in a number of examples related to templating vertical interconnect accesses(VIA).

Advancements in Polymer Science: Synthesis, Characterization, and Biomedical Applications of Homopolymers and Copolymers

Polymer science encompasses a different range of materials critical to industries spanning from packaging to biomedicine. Understanding the synthesis, characterization, and applications of common homopolymers and copolymers is fundamental to advancing polymer research and development. In this comprehensive review, we explore various preparation methods, including free radical, anionic, and cationic polymerization, utilized for synthesizing homopolymers and copolymers. Furthermore, we investigate solvent choices commonly employed for polymer characterization, ranging from neat conditions, polar protic and polar aprotic solvents. We also explored characterization techniques, including Fourier Transform Infrared Spectroscopy (FTIR), Nuclear Magnetic Resonance (NMR), Atomic Force Microscopy (AFM), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis (TGA). In addition to industrial applications, we highlight the diverse biological applications of homopolymers, poly(2-hydroxyethyl methacrylate) (pHEMA) and polystyrene, which find its extensive use in biomedicine. By synthesizing and analyzing this wealth of information, this review aims to provide a comprehensive understanding of the synthesis, characterization, and applications of homopolymers and copolymers, with a particular focus on their biological applications. This holistic approach not only contributes to advancements in polymer science and technology but also fosters innovation in biomedicine, ultimately benefiting human health and well-being.

Influence ofβ-nucleating Compound Agents on the Mechanical Properties and Crystallization Behavior of Polypropylene Random Copolymer

A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.

Research on the Marine Antifouling Ability and Mechanism of Acrylate Copolymers and Marine Coatings Based on a Synergistic Effect

Marine biofouling is an urgent global problem in the process of ocean exploitation and utilization.In our work,a series of zinc-based acrylate copolymers(ACZn-x)were designed and synthesized using benzoic acid,zinc oxide(ZnO)and a random quaternion copolymer consisting of ethyl acrylate(EA),butyl acrylate(BA),acrylic acid(AA)and methacrylic acid(MAA)by free radical polymerization and dehydration condensation.The ACZn-x with a zinc benzoate side chain is able to hydrolyze in natural seawater under static conditions,resulting in the formation of a smooth surface.We investigated and confirmed the antifouling(AF)behavior of ACZn-x in the laboratory and revealed that they have better antibacterial(86%for S.aureus and 72%for E.coli)and anti-algal(≥60.1%for N.closterium and≥67.5%for P.subcordiformis)activities.We also assessed the marine AF properties of ACZn-x and corresponding coatings in Qingdao,China;the ACZn-x exhibited ideal AF properties with little silt and biological mucosa adhered to the ACZn-x surface after 6 months,and corresponding coatings exhibited little biofouling after 16 months in the ocean.Importantly,possible AF mechanisms were further proposed at the cellular level.These results could be helpful for the development and application of effective AF coatings.

Highly efficient organic solar cells with improved stability enabled by ternary copolymers with antioxidant side chains

The stability of organic solar cells(OSCs)remains a major concern for their ultimate industrialization due to the photo,oxygen,and water susceptibility of organic photoactive materials.Usually,antioxidant additives are blended as radical scavengers into the active layer.However,it will induce the intrinsic morphology instability and adversely affect the efficiency and long-term stability.Herein,the antioxidant dibutylhydroxytoluene(BHT)group has been covalently linked onto the side chain of benzothiadiazole(BT)unit,and a series of ternary copolymers D18-Cl-BTBHTx(x=0,0.05,0.1,0.2)with varied ratio of BHT-containing side chains have been synthesized.It was found that the introduction of BHT side chains would have a negligible effect on the photophysical properties and electronic levels,and the D18-Cl-BTBHT0.05:Y6-based OSC achieved the highest power conversion efficiency(PCE)of 17.6%,which is higher than those based active layer blended with BHT additives.More importantly,the unencapsulated device based on D18-Cl-BTBHTx(x=0.05,0.1,0.2)retained approximately 50%of the initial PCE over 30 hours operation under ambient conditions,significantly outperforming the control device based on D18-Cl(90%degradation in PCE after 30 h).This work provides a new structural design strategy of copolymers for OSCs with simultaneously improved efficiency and stability.

MA-AA-MAS三元共聚物的制备及其阻垢性能研究

以水为溶剂,过硫酸钾为引发剂,马来酸酐(MA)、丙烯酸(AA)和甲代烯丙基磺酸钠(MAS)为单体合成了三元共聚物.探讨了该共聚物转化率、平均分子质量、阻垢分散效果与单体配比、引发剂用量、反应温度、反应时间之间的关系.结果表明,当单体MA,AA,MAS物质的量比为3.0∶1.0∶0.6,引发剂质量分数为单体总量的14%,反应温度应控制在90℃,反应时间为4 h时,所制得的共聚物性能最佳,单体转化率为90.1%,对CaCO3和Ca3(PO4)2的阻垢率分别达到98.2%和92.1%.

Degradation of PBS-Based Copolymers and Impacts on the Growth of Winter Wheat

[Objective] The degradation properties of PBS-based copolymers and impacts on the growth of winter wheat were studied.[Method] Seeds of winter wheat were sown and cultivated in soil,and mixed with equal amounts of PBS,PBS-co-HS and PBS-co-BA,to investigate the degradation of polymers in soil and effects of the degradation intermediates and degradation products on seed germination and the growth of winter wheat during the continuous process of degradation.[Result] The results showed that the copolymers had better biodegradation properties than PBS in Lou Soil in Shaanxi Province under the same condition;polymer treatments had not affected the germination percentage and plant height of the winter wheat but contributed to the improvement of plant biomass.[Conclusion] These results suggested that the degradation and degradation products of PBS,PBS-co-HS and PBS-co-BA had not affected the growth of plants in soil environment for temporary.

线状MA-AA-MAS聚羧酸陶瓷分散剂的制备工艺及其性能

采用水溶液聚合法,以异丁烯磺酸钠(MAS)、丙烯酸(AA)和顺酐(MA)为主要合成原料,合成了一种线状MA-AA-MAS聚羧酸陶瓷分散剂。采用FT-IR手段对其官能团结构进行了表征。分别通过正交和单因素试验以确定各单体比例和研究各单体用量及聚合反应条件对陶瓷坯体料浆流动性能的影响。结果表明,合成该分散剂的最佳工艺条件为:n(MAS)∶n(AA)∶n(MA)=1.0∶3.0∶1.0、w(APS)=8%、聚合温度和时间分别为90℃和5 h。当分散剂的掺量为0.35%(相对绝干料浆质量)时,料浆体系的黏度仅为78.2 mPa·s。

Removal of manganese from waste water by complexation-ultrafiltration using copolymer of maleic acid and acrylic acid

Copolymer of maleic acid and acrylic acid （PMA-100）, combining with polyvinyl butyral （PVB） ultrafiltration membrane was used for the removal of Mn（II） from waste water by complexation-ultrafiltration. The carboxylic group content of PMA-100 and the rate of complexation reaction were measured. Effects of the mass ratio of PMA-100 to Mn（II） （n）, pH, background electrolyte, etc on the rejection rate （R） and permeate flux （J） were investigated. The results show that carboxylic group content of PMA-100 is 9.5 mmol/g. The complexation of Mn（II） with PMA-100 is rapid and completed within 5 min at pH 6.0. Both R and J increase with pH increasing in the range of 2.5-7.0, and R increases with the increase of n at pH 6.0 while J is little affected. The background electrolyte leads to the decrease of R, and CaCl2 has much greater effect on R than NaCl at the same ionic strength.

MA-AA-MAS共聚物的阻垢性能研究

以水为溶剂,过硫酸钾为引发剂,马来酸酐(MA)、丙烯酸(AA)和甲代烯丙基磺酸钠(MAS)为单体合成了共聚物,综合研究该产品的阻垢性能。探讨了介质pH值、Ca2+浓度、温度和共聚物用量对MA-AA-MAS共聚物阻垢性能的影响。结果表明,MA-AA-MAS共聚物在较宽的介质温度范围内对碳酸钙和磷酸钙都有良好的阻垢效果,对CaCO3和Ca3(PO4)2阻垢率可分别达到98.2%和92.1%。而且也适用于硬度不超过250 mg/L的水处理系统中。

Copolymer 1保护高眼压大鼠视神经的免疫学机制

目的探讨Copolymer 1(Cop 1)对实验性高眼压性青光眼视神经保护作用的相关免疫学机制。方法对27只大鼠采用烧灼巩膜上静脉制作双眼高眼压模型,在眼压升高的第3周,取12只模型大鼠于后脚皮内注射100μg Cop 1和等体积的完全弗氏佐剂(CFA)混合乳化液(实验组);另取12只模型大鼠作为对照组,后脚皮内注射等体积PBS和CFA的混合乳化液;其余3只模型大鼠作为空白对照组,不做任何处理。1周后取出大鼠脾淋巴细胞,采用流式细胞仪检测T细胞亚群的变化;ELISA法检测T细胞分泌细胞因子的变化;[3H]thymidine标记检测淋巴细胞的增殖。结果实验组大鼠的CD4+CD25+Treg/CD4+比值显著高于对照组和空白对照组(P<0.05)。实验组IL-10分泌量和分泌浓度均显著高于对照组和空白对照组,差异有统计学意义(P<0.05),但三组间INF-γ分泌量和分泌浓度比较差异均无统计学差异(P>0.05)。三组间体外刺激淋巴细胞指数比较差异无统计学意义(P>0.05)。结论 Cop 1能诱导CD4+CD25-向CD4+CD25+Treg转化,促进Th1转化为Th2,并增加IL-10的分泌。

Pyrolysis-Gas Chromatography/Mass Spectrometry for Microstructure and Pyrolysis Pathway of Polyester-Polyether Multiblock Copolymer

The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.

Novel synthesis metal 3-alkylthiophene copolymer

Copolymer, regiorandom and regioregular poly （ 3-octylthiophene ）-co-poly （ 3-（ 2-ethyl-1- hexylthiophene））（P3OTIOT） was synthesized by a FeCl3-oxidation and GRIM （grignard method） approach. The structure and optical properties were verified by the Fourier transform infrared, ultraviolet visible spectroscopy, NMR （nuclear magnetic resonance ）, gel permeation chromatography （GPC） and photoluminescence （PL）. The results indicate that the band-gap energy of the regioregular HT P3OTEHT was lower than that of the regiorandom copolymer and both of them depict low band-gap energy, high photoluminescence quantum yield, excellent solubility and processability, and might be promising polymer materials for applications in polymer light-emitting diodes, light-emitting electrochemical cells and polymer solar cells, etc.

Dissipative Particle Dynamics Simulation of Microscopic Properties in Diblock Copolymer Films

Mean-square bond length, root-mean-square end-to-end distance and gyration radius in diblock copolymer films have been studied by dissipative particle dynamics simulations. Results show evident linear trends of any property separately with the thickness of film, the interaction between particles of different types, the repulsion between particle and boundary, except for the dependence of the variations of mean-square bond length on the thickness of film, which exhibits as a wave trend. What＇s more, the varying trends of mean-square bond length and root-mean-square end-to-end distance can correspond to each other. The density distribution of either component in diblock copolymer film can be controlled and adjusted effectively through its interaction with boundary.

Microphase Separation of Star-diblock Copolymer Films： a Dissipative Particle Dynamics Simulation

The microphase-separating behaviors of two types of star-diblock copolymers （Ax）4（By）4 and （A^Bg）4 in thin films are studied using the simulation technique of dissipative particle dynamics. A variety of ordered mesostructures have been observed and the simulated phase diagrams show obvious symmetries for the （Ax）4（By）a films and asymmetries for the （AxBy）4 films, besides, it is easier for the （Ax）4（By）4 than for the （A^By）4 to carry out microphase separation under the same conditions, which has been recognized in bulk and can be ascribed to the structural difference between the two types of star copolymers. There are some correspondences between the mesostructures formed in the film and those formed in bulk at the same composition fraction. Decreasing the thickness of film and strengthening the A-B repulsion both help the mesostructures enhance the degree of order. Composition fraction dependences of the mean-square radius of gyration in the two types of star copolymer films are almost contrary, which can be attributed to the differences in their respective structures. These findings can provide a guide to designing novel microstructures involving star-diblock copolymers via geometrical confinement.

Nutrient Release Characteristics of Vinyl Chloride-Vinyl acetate Copolymers Coated SlowRelease Nitrogen Fertilizer and Its Effect on Soil Mineral Nitrogen

[Objective] The aim was to explore release characteristics of vinyl chlo- ride-vinyl acetate copolymer controlled-release N fertilizer and the effects on minerat nitrogen in soils. [Method] Vinyl chloride-vinyl acetate copolymer and hydroxyl-modi- fied VCNAc were taken as coating materials to prepare slow release fertilizer. Nutri- ent release characteristics of VC/VAc slow release fertilizer was evaluated by water immersion method and the effects of VC/VAc slow release fertilizer on mineral ni- trogen were researched by pot experiment. [Result] The release periods of VC-VAc controlled-release urea and hydroxyl-modified VC/VAc coated urea were 60 and 50 d, respectively. Furthermore, the content of ammonium nitrogen reached the peak on the 30th d and the content of nitrate nitrogen reached the peak on the 60th d in soils in treatments with VCNAc and hydroxyl-modified VC/VAc; the content of nitrate nitrogen rose again on the 120th d in the treatment with VC/VAc. In terms of wheat yield, different treatments showed insignificant differences and rice yield in the treatment with VCNAc was significantly higher than that in the treatment with hy- droxyl-modified VCNAc （P〈0.05）. [Conclusion] The release days of slow controlled- release fertilizer vary upon pot experiment method and water immersion method. Slow controlled-release fertilizer is not suitable for monoculture, due to long fertilizer efficiency, but multiple cropping would be optimal for its role to be fully exploited.

An Approach to the Flame Retardancy of EVA Copolymer by Plasma Treatmentc2

An attempt was made in the paper aiming at imparting flame retardancy to polymers by plasma grafting technique Based on EVA copolymers with different VA contents the author tried to use the Ar plasma followed by grafting with/without subsequent saponification and metal ion exchange expediting the charring of polymers upon heationg Characterization of the flammability of the plasma treated EVA copolymers grafted with acrylic monomers(MAA,AA and AAm)indicates that this approach turns out to be a promising way and worthy doing whatever in research and/or applications

Copolymer1保护视神经的作用及作用机制

Copolymer1(Cop1)是美国FDA批准的一种用于治疗多发性硬化的多聚肽类药物。许多实验用Cop1免疫动物,发现Cop1对钳伤和高眼压造成的视神经损伤有保护作用。我们对Cop1作用的免疫学机制的研究进展进行综述。

线状MA-AA-MAS聚羧酸陶瓷添加剂的吸附行为

运用总有机碳/总氮分析技术,研究了在25℃下,线状和梳状聚羧酸添加剂的吸附容量(qt)与吸附时间(t)的关系。通过对其吸附动力学和吸附模型的分析,探讨了它们的吸附行为。结果表明:线状和梳状聚羧酸添加剂的吸附容量随吸附的进行而增加,10 min后趋于稳定,其吸附过程分别与拉格尔格伦(Lagergren)伪二级动力学方程和朗缪尔(Langmuir)吸附等温方程相吻合。线状MA-AA-MAS聚羧酸陶瓷添加剂饱和吸附容量(qsa)可达18.52 mg/g。