南美奥连特盆地白垩系Napo组Main-M1亚段沉积体系重建及油气勘探意义

厄瓜多尔奥连特盆地是南美安第斯前陆盆地群中最重要的含油气盆地之一,上白垩统Napo组Main-M1亚段是目前勘探开发的主力层位之一,其沉积环境一直存在争议,沉积体系及演化过程尚不明确。本研究基于岩心、测录井等资料,针对Main-M1亚段沉积时期的主要沉积微相类型、沉积体系及演化过程进行了研究。结果表明:研究区位于水动力条件复杂的海陆过渡环境,在东部发育潮汐三角洲,向西部逐渐过渡为浅海陆棚环境;研究区内主要识别出水下分流河道、水下分流河道间、潮汐水道、潮汐沙坝、潮汐沙坪、潮汐水道间等8类沉积微相。根据岩电特征,进一步将Main-M1亚段划分为3个小层。通过分析3个小层的岩性组合演变特征,确定在Main-M1亚段沉积时间内,Auca古隆起逐渐形成,同时挠曲作用导致相对海平面升高,3个小层在垂向上呈水体逐渐变深、潮汐三角洲前缘不断向陆地退缩的形式;基于对Main-M1亚段沉积时期潮汐三角洲—浅海陆棚沉积体系的重建,研究区东部的水下分流河道及前缘沙坝也被认为具有一定的岩性油气藏勘探潜力。

南美奥连特盆地坎潘阶碳酸盐岩建隆的识别及科迪勒拉运动早期抬升对Main-M1储集层沉积的控制作用

厄瓜多尔奥连特盆地Main-M1砂岩储集层是该盆地近年来重要的构造-岩性圈闭勘探目的层系,寻找砂体和岩性尖灭带是Main-M1砂岩勘探的关键。该盆地为晚白垩世弧后热沉降盆地和新生代前陆盆地的叠合盆地,在构造上分为西部逆冲褶皱带、中部前渊带和东部斜坡带,在前渊带发育一系列近N-S走向长轴背斜。综合观察和分析发现,在研究区内长轴背斜上生长了1个碳酸盐岩建隆,地震上具有明显的边界反射形成丘状外观和较连续的弱振幅内部反射,测井上具有厚层、近箱型低GR响应特征。该建隆表明在其沉积的坎潘阶时期,长轴背斜已经开始抬升,将背斜顶部推升至古水面附近,形成建隆局部生长的条件。压实回剥方法恢复古地貌证实,长轴背斜在坎潘阶早期开始发育,构造抬升幅度为7~10 m。由于构造抬升和建隆发育始于Main-M1沉积前,抬升古地貌可影响砂岩沉积。根据背斜上数十口已钻井Main-M1砂体厚度统计,发现背斜顶部砂岩储集层整体较发育,但古建隆顶部砂层厚度减薄或者缺失,在背斜的南部延伸段,构造顶部砂岩缺失,仅在东部侧翼富集。提出了近N-S向背斜古地貌影响Main-M1砂体沉积,使砂岩于富集于构造下倾方向的控砂模式。该模式可形成上倾尖灭型构造-岩性圈闭,从而提供了通过古地貌恢复在奥连特盆地前渊带寻找新圈闭的勘探思路。

Strong shock propagation for the finite-source circular blast in a confined domain

The circular explosion wave produced by the abrupt discharge of gas from a high-temperature heat source serves as a crucial model for addressing explosion phenomena in compressible flow.The reflection of the primary shock and its propagation within a confined domain are studied both theoretically and numerically in this research.Under the assumption of strong shock,the scaling law governing propagation of the main shock is proposed.The dimensionless frequency of reflected shock propagation is associated with the confined distance.The numerical simulation for the circular explosion problem in a confined domain is performed for validation.Under the influence of confinement,the principal shock wave systematically undergoes reflection within the domain until it weakens,leading to the non-monotonic attenuation of kinetic energy in the explosion fireball and periodic oscillations of the fireball volume with a certain frequency.The simulation results indicate that the frequency of kinetic energy attenuation and the volume oscillation of the explosive fireball align consistently with the scaling law.

Ground response and failure mechanism of gob-side entry by roof cutting with hard main roof

This study is the result of long-term efforts of the authors’team to assess ground response of gob-side entry by roof cutting(GSERC)with hard main roof,aiming at scientific control for GSERC deformation.A comprehensive field measurement program was conducted to determine entry deformation,roof fracture zone,and anchor bolt(cable)loading.The results indicate that GSERC deformation presents asymmetric characteristics.The maximum convergence near roof cutting side is 458 mm during the primary use process and 1120 mm during the secondary reuse process.The entry deformation is closely associated with the primary development stage,primary use stage,and secondary reuse stage.The key block movement of roof cutting structure,a complex stress environment,and a mismatch in the supporting design scheme are the failure mechanism of GSERC.A controlling ideology for mining states,including regional and stage divisions,was proposed.Both dynamic and permanent support schemes have been implemented in the field.Engineering practice results indicate that the new support scheme can efficiently ensure long-term entry safety and could be a reliable approach for other engineering practices.

Analysis of Dry-Wet Climate Change Characteristics and Main Influencing Factors in Main Grain Producing Area of Tibet from 1980 to 2021

Based on the daily meteorological observation data of seven meteorological stations in southern Tibet from 1980 to 2021 (April-October), the temporal and spatial variation characteristics and influencing factors of aridity index ( AI ) in the growing season of major grain producing areas in Tibet were studied by using climate tendency rate, Mann-Kendal test, Morlet wavelet analysis, GIS hybrid interpolation method, Pearson correlation coefficient, contribution rate analysis and other methods. The results showed that the average AI in the main grain producing areas of Tibet was 1.7, which belonged to the semi-arid area, and the overall trend was decreasing (humidifying) (-0.036/10 a). The linear decreasing trend was different in different regions, and the area around Lhatse County was the most significant (-0.26/10 a). AI had no obvious abrupt change, and had long- and medium-term fluctuation characteristics of 24 years, 6 years. The spatial distribution was uneven, and had the characteristics of ‘shrinking arid area and expanding humid area . The contribution rates of the main climate influencing factors of AI varied in different regions. In general, the contribution rates after quantification was as follows: precipitation (34.9%)>relative humidity (28.4%)>sunshine (19.9%)>maximum temperature (12.4%).

Minimally Invasive Total Arterial Coronary Artery Bypass Grafting in Left Main Stem Disease

Objective: The aim was to show that Minimally Invasive total arterial revascularization for left main stem coronary artery disease, via a left anterior Mini thoracotomy using bilateral internal thoracic arteries is feasible, reproducible and safe. Further, there has been no exclusive data or experience with minimally invasive coronary artery bypass grafting in left main stem disease. Methods: From April 2019 to March 2024, 41 patients with left main stem stenosis, left main equivalent disease and unprotected left main with triple vessel disease underwent off pump minimally invasive multivessel coronary artery bypass grafting using either in situ pedicled Bilateral Internal Thoracic arteries or Left and Right Internal Thoracic artery Y composite conduits at three centers. Bilateral Internal Thoracic arteries were harvested under direct vision. All patients had an Intra-Aortic Balloon Pump inserted via the femoral artery prior to induction of anesthesia, to prevent any hemodynamic instability, arrhythmias, and was removed following completion of the procedure in the operating room without any complications. Efficacy and outcomes were evaluated by i) Primary (MACCE)-Major Adverse Cardiac and Cardiovascular events and ii) Secondary outcome measures including total length of stay, return to full physical activity and quality of life. Mean follow-up was 1.4 years (Maximum was 2.5 years). Results: 41 patients with left main stem coronary artery stenosis, underwent total arterial revascularization using bilateral internal thoracic arteries. Left main stem stenosis was present in 29 patients, Unprotected left main stem stenosis with triple vessel disease in 7 and left main equivalence in 5 patients. In this cohort, 29 patients with only left main stem stenosis had 2 grafts each, 7 patients with left main and triple vessel disease had 3 grafts and 5 patients with left main equivalent disease had 2 grafts respectively. The average number of grafts was 2.2. One patient was converted to open sternotomy as an emergency because of hemodynamic instability and myocardial revascularization was done on cardiopulmonary bypass (2.2%). The average hospital stay was 3.7 days. Ejection fraction was 45% ± 5%. There was one mortality (2.2%) but no major morbidity. The average ICU and hospital stay was 24 ± 4 hours and 3.7 days. All patients were free from major adverse cardiac and cerebrovascular events at follow-up. Conclusions: Multivessel total arterial revascularization using left and right internal thoracic arteries, was performed via a left anterior Mini thoracotomy on patients with left main stem disease and showed that it was safe, reproducible and will help extend the armamentarium of the surgeon in minimally invasive Coronary artery bypass grafting. Concomitantly it helped enhance the potential for shorter hospital stay, increased survival, decreased morbidity, and earlier return to full activity. Furthermore, the safety, efficacy, and outcomes of minimally invasive coronary artery bypass grafting in this high-risk group evaluated by primary and secondary outcome measures have been good in this study.

“Eternal Motion” as a “Form of Movement of a Special Nature” and the Main Condition for the Creation of the Universe

The article hypothesizes that DE and DM (UCM) are a “Form of Motion of a Special Nature”, where “Form of Motion” means “Eternal Motion” as the power of dynamics of different levels and varying degrees of self-sufficiency, and by “Special Nature”, gravitational and two other properties of matter, “tied” to the “Eternal Movement” and completely dependent on it. Carriers of key properties of a “Special Nature” have been established: “0”-DE particles and “3”-DM particles (UDM). The unity of their inherent “motionally-gravitational” properties and the peculiarity of the relationship between “motion” and “gravity” are revealed: the higher the intensity of “Eternal Motion”, the stronger the gravitational properties of matter are manifested (and vice versa). The relationship of “time” with the “vibration frequency” and the “mass” of photons with the “degree of bonding and deformation properties of the field” is shown. The maximum level of gravity has been determined, which allows Nature to successfully create the Universe: such a landmark is the proximity to the property of the Primary Source—the “pure graviton” of the OSP space, the most powerful “motionally-gravitational” particle of the Universe. The reasons for the emergence of such an identity of the gravitational properties of particles with the indicators of a “pure graviton” are established: for “0”-DE particles, this is the acquisition of the function of “freedom of movement”;for “3”-DM particles (UDM), the creation of a special structure—a “double field” (“Main” and “Small”). The presence in the “double field” of specific “tools” for the creation of the worlds of the Universe—gravitational “waves” gives rise to impulses (shocks) of varying intensity and shape. A list of functions performed by “waves” in the “Main” and “Small” fields has been compiled. The specific conditions for the formation of “UDM Streams”, their transformation into a “Vortex” and, under the influence of a powerful Initial Impulse (push), sending them to the “place” of the creation of galaxies, are shown. It is suggested that there is a “Cycle of Matter in Nature” in the closed structure of our Universe due to the “work” of “waves” and the functioning of special “factories” in the form of exotic space objects—Black holes.

A comparative study of the main factors controlling geohazards induced by 10 strong earthquakes in Western China since the Wenchuan earthquake in 2008

Determining the main controlling factors of earthquake-triggered geohazards is a prerequisite for studying earthquake geohazards and post-disaster emergency response.By studying these factors,the geomorphic and geological factors controlling the nature,condition,and distribution of earthquake-induced geohazards can be analyzed.Such insights facilitate earthquake disaster prediction and emergency response planning.The authors combined field investigations and spatial data analysis to examine geohazards induced by seismic events,examining ten earthquakes including the Wenchuan,Yushu,Lushan events,to elucidate the main control factors of seismic geohazard.The authors observed that seismic geohazard occurrence is usually affected by many factors,among which active nature of the seismogenic fault,seismic peak ground acceleration(PGA),topographic slope and geomorphic height differences,and distance from the fault zone and river system are the most important.Compared with strike-slip earthquakes,thrust earthquakes induce more high-altitude and high-speed remote landslides,which can cause great harm.Slopes of 0°–40°are prone to secondary seismic geohazards,which are mainly concentrated 0–6 km from the river system.Secondary geohazards are not only related to seismogenic fault but also influenced by the associated faults in the earthquake area.The maximum seismic PGA and secondary seismic geohazard number are positively correlated,and the horizontal and vertical ground motions play leading and promoting roles in secondary geohazard formation,respectively.Through the research,the spatial distribution of seismic geohazards is predicted,providing a basis for the formulation of emergency response plans following disasters.

“Treat-Repair-Treat”:Management of Left Main Coronary Compression by a Pulmonary Artery Aneurysm in a Patient with Atrial Septal Defect and Significant Pulmonary Hypertension

Left main coronary compression syndrome(LMCS)may complicate pulmonary artery aneurysms(PAA),usually developed in the context of pulmonary arterial hypertension(PAH).We report the case of a 51-year-old female patient with an atrial septal defect(unsuitable for device closure)complicated by a PAA generating a 90%left main stenosis.The significant PAH held us back from immediate surgery.After specific dual PAH-targeted therapy(sildenafil and bosentan),the atrial septal defect could be closed with a unidirectional valved patch;the PAAinduced LMCS was treated by reductive arterioplasty.The postoperative course was uneventful.Follow-up showed clinical improvement,but PAH treatment was still needed.After three months,coronary angiography showed only an insignificant residual left main stenosis,proving that reductive pulmonary arterioplasty was effective in treating LMCS.Any PAA requires further evaluation for LMCS,a dangerous but treatable complication.The“treat-repair-treat”strategy and shunt-closure with a unidirectional valved patch can both improve surgical prospects of LMCS with shunt-related PAH.

Construction of Anti-breaking Models of the Main Veins of Flue-cured Tobacco Leaves and Principal Component Analysis

[Objective] This study aimed to explore the related mechanisms of the breaking of flue-cured tobacco leaves. [Method] Anti-breaking models of the main veins of flue-cured tobacco leaves were constructed for principal component analysis on the anti-breaking index, leaf traits and cellulose contents. [Result] The results showed that the growth traits had certain relevance with the cellulose contents while the leaf weight assumed a significant negative correlation with the anti-breaking index, indicating that the heavier the leaf weight was, the weaker the anti-breaking capacity of flue-cured tobacco would be; the cross-sectional area of main veins and the cellulose contents had shown a positive correlation with the anti-breaking index, indicating that the thicker the main vein of flue-cured tobacco was, the higher the cellulose contents would be, and the stronger the anti-breaking capacity of flue-cured tobacco leaves would be. [Conclusion] This study provided theoretical basis and reference to improve tobacco production and enhance the quality of flue-cured tobacco.

Analysis on the Combining Ability and Heritability of Main Agronomic Traits of Hybrid Glutinous Sorghum

Using 3 sterile lines and 12 restorer of glutinous sorghum as experimental materials,36 hybrid combinations（3×12 NCⅡ） were designed to analyze the combining ability and heritability of six main agronomic traits,including plant height,panicle length,growth period,1 000-grain weight,per panicle grains and per panicle grain weight.The results showed that except per panicle grain number all other five agronomic traits have remarkable or extremely remarkable general combining ability and specific combining ability.Six agronomic traits were found to be control by additive genetic effect.Most of these agronomic traits are more easily influenced by restorers than sterile lines,suggesting that more attention should be paid to select restores in hybrid glutinous sorghum breeding.The narrow-sense heritability of these agronomic traits were in order growth period plant height per panicle grain weight panicle length 1 000-grain weight per panicle grains.

Statistical features of aftershock distribution size for moderate and large earthquakes in Chinese mainland

Based on data of earthquake sequences with Ms≥5.0 in Chinese mainland from 1970 to 2004, for different sequence types and different rupture modes of the main shock, the relationship between aftershock distribution size R and the magnitude of the main shock Mo has been studied statistically. Considering the rupture mode of the main shock, we give the quantitative statistical relationships between R and Mo under 95% confidence level for different sequence typos. Qualitatively, lgR, the logarithm of the aftershock distribution size, is positively correlative to the M0, but the data distribution is dispersed. Viewing from different sequence typos, the correlation between R and M0 is very weak for isolated earthquake type （lET） sequence, R distributes in the range from 5 to 60 km; For mainshock-aftershock type （MAT）, lgR is positively correlative to M0; For multiple main shock type （MMT）, the corelation between lgR and M0 is not very obvious when M0≤6.2 and R distributes in the range from 5 to 70 km, while it shows a linear correlation when M0≥6.3. The statistical results also show that the occupational ratios of different sequence types for strike-slip and oblique slip are almost the same. But for dip-slip （mostly are thrust mechanisms）, the ratio of MAT is higher than that of IET and MMT. Comparing with previous results, it indicates that, when M0 is large enough, R is mainly determined by M0 and there is almost no relationship with the rupture mode of the main shock.

Controlling factors of remaining oil distribution after water flooding and enhanced oil recovery methods for fracturecavity carbonate reservoirs in Tahe Oilfield

Based on comprehensive analysis of core, well logging, seismic and production data, the multi-scale reservoir space, reservoir types, spatial shape and distribution of fractures and caves, and the configuration relationship with production wells in fracture-cavity carbonate reservoirs were studied systematically, the influence of them on the distribution of residual oil was analyzed, and the main controlling factors mode of residual oil distribution after water flooding was established. Enhanced oil recovery methods were studied considering the development practice of Tahe oilfield. Research shows that the main controlling factors of residual oil distribution after water flooding in fracture-cavity carbonate reservoirs can be classified into four categories: local high point, insufficient well control, flow channel shielding and weak hydrodynamic. It is a systematic project to improve oil recovery in fracture-cavity carbonate reservoirs. In the stage of natural depletion, production should be well regulated to prevent bottom water channeling. In the early stage of waterflooding, injection-production relationship should be constructed according to reservoir type, connectivity and spatial location to enhance control and producing degree of waterflooding and minimize remaining oil. In the middle and late stage, according to the main controlling factors and distribution characteristics of remaining oil after water flooding, remaining oil should be tapped precisely by making use of gravity differentiation and capillary force imbibition, enhancing well control, disturbing the flow field and so on. Meanwhile, backup technologies of reservoir stimulation, new injection media, intelligent optimization etc. should be developed, smooth shift from water injection to gas injection should be ensured to maximize oil recovery.

Spatial structural analysis of main saddle for single tower spatial cable self-anchored suspension bridge

Based on the engineering background of the Jiangxinzhou Bridge in Nanjing, issues related to the spatial main saddle of the self-anchored suspension bridge are studied. The refinement finite element model is established by the secondary development technology based on the platform of the general finite element program, and a reasonable load pattern is used in its spatial structural analysis, by which its path of force transference and stress distribution are obtained. Matched with the spatial main cable, the tangency point correction method is also discussed. The results show that the lateral wall stress of the saddle groove is higher than the stress within the wall due to the role of lateral forces in the finished bridge state; the horizontal volume force of the main cable can generate a gradient distributed vertical extrusion pressure on the saddle clamping device and the main saddle body; the geometric nonlinear effect of the self- anchored suspension bridge cable system in the construction process is significant, which can be reflected in the spatial tangent point position of the main cable with the main saddle changes a lot from free cable to finished cable.

Mathematically modeling the main dimensions of self-elevating drilling units

The present status of self-elevating drilling units was analysed. Based on statistics of the main dimensions of self-elevating drilling units, a mathematical model was established using stepwise return procedures and a back-propagation neural network. mathematical model is applicable and reliable. The of the main dimensions of self-elevating drilling Analysis of examples of calculations showed that the model is useful for mastering the essential variations units and can be used for technical and economic analysis as well as in conceptual designs of drilling units.

Genetic Diversity Analysis of the Main Commercial Varieties of Brassica napus in Guizhou Province

[Objective] The aim was to investigate the genetic diversity of the main commercial varieties of Brassica napus in Guizhou Province at the molecular level. [Method] Nine main commercial rapeseed cultivars in Guizhou were detected by 40 pairs of SSR primers used in the national regional trial of B. napus, and then clus-tering analysis was carried out. [Result] A total of 191 bands were amplified, and 143 （accounting for 75%） of them showed polymorphism among the nine rapeseed cultivars. By cluster analysis, the nine cultivars were divided into two groups. Group A included seven varieties, and group B consisted of two cultivars from Guizhou In-stitute of Oil Crops. The cultivars in group A were further divided into sub-groups A1 and A2 at the similarity coefficient of 0.643 4. Sub-group A1 included three culti-vars from Guizhou Rapeseed Institute, and sub-group A2 included the other four cultivars from Guizhou Institute of Oil Crops. [Conclusion] The cultivars bred by the same institute had similar genetic background. The cultivars from Guizhou Institute of Oil Crops showed wider genetic basis. However, the genetic similarity coefficient between Qianyou 17 and Qianyou 29 was up to 0.87, suggesting that they shared closer genetic basis.

Knowledge Discovery in Maintenance Record of FMS Equipment for Diagnosing

To discover the knowledge of fault diagnosis in maintenance record of flexible manufacture system(FMS) equipment. An algorithm (process) was presented, which consists of ① preparatory phase in which some items in maintenance record are selected and decomposed into associated concepts and attributes, and ② discovering and establishing process, in which some possible relationships between the concepts and attributes can be established and knowledge is formulated. The rich diagnosis knowledge in maintenance record was captured through applying the method. An application of the method to the diagnosis system for FMS equipment showed that the approach is correct and effective.

Application of jet main region specification model in CFD simulation for room air movement analysis

This paper analyzes the applications of four air terminal device（ATD）models（i.e.,the basic model,the box model,the N-point momentum model,the jet main region specification model）in computational fluid dynamics（CFD）simulation and their performance in case study.A full-scale experiment is performed in an environment chamber,and the measured air velocity and temperature fields are compared with the simulation results by using four ATD models.The velocity and temperature fields are measured by an omni-directional thermo-anemometer system.It demonstrates that the basic model and the box model are not applicable to complicated air terminal devices.At the occupant area,the relative errors between simulated and measured air velocities are less than 20% based on the N-point momentum model and the jet main region specification model.Around the ATD zone,the relative error between the numerical and measured air velocity based on the jet main region specification model is less than 15%.The jet main region specification model is proved to be an applicable approach and a more accurate way to study the airflow pattern around the ATD with complicated geometry.

STIFFNESS ANALYSIS OF THE MAIN MODULE FOR PARALLEL MACHINE TOOLS BY FINITE ELEMENT ANALYSIS

With the aid of commercial finite element analysis software package ANSYS,investigations are made on the contributions of main components to stiffness of the main module for parallel machine tools,and it is found that the frame is the main contributor.Then,influences of constraints,strut length and working ways of the main module have also been investigated.It can be concluded that when one of the main planes of the frame without linear drive unit is constrained,the largest whole stiffness can be acquired.And,the stiffness is much better when the main module is used in a vertical machine tool instead of a horizontal one.Finally,the principle of stiffness variation is summarized when the mobile platform reaches various positions within its working space and when various loads are applied.These achievements have provided critical instructions for the design of the main module for parallel machine tools.

Is it time for elective left main percutaneous coronary intervention to become 'main stream'?

Left main (LM) stenting is considered by many to be one of the last frontiers of interventional cardiology. Beginning with the VA cooperative study published in 1976 demonstrating a mortality benefit for patients undergoing coronary artery bypass grafting (CABG), i the standard of care for treatment of left main coronary artery disease has been surgical.The most recent 2005 update of the ACC/AHA/SCAI Practice Guidelines on PCI 2 again notes that "CABG using IMA grafting is the 'gold standard' for treatment of unprotected left main disease and has proven benefit on long-term outcomes."……