期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
FROM MASSICOT (β-PbO) TO LITHARGE (α-PbO)——A NATURAL TRANSFORMATION UNDER ATMOSPHERIC CONDITIONS
1
作者 张如柏 邱柱国 +1 位作者 帅德权 龚夏生 《Chinese Science Bulletin》 SCIE EI CAS 1982年第2期238-,共1页
We collected a sample of massicot in a warm spring sediment in Chongqing, Sichuan, in March 1954. The massicot was botryoidal kidney shaped (reniform), lemon-yellow in colour, with a white film of travertine on the su... We collected a sample of massicot in a warm spring sediment in Chongqing, Sichuan, in March 1954. The massicot was botryoidal kidney shaped (reniform), lemon-yellow in colour, with a white film of travertine on the surface. After 23 years, the sample was discovered to have changed into orange red litharge on its outer layer, with the internal massicot core unchanged. 展开更多
关键词 outer SHAPED unchanged ORANGE LEMON FROM massicot PBO TO LITHARGE CHONGQING YELLOW
原文传递
纳米铜和微米氧化铅在合成油PAO10中的磨损机制 被引量:2
2
作者 张智宏 左晓亮 梁慧军 《润滑与密封》 CAS CSCD 北大核心 2012年第10期74-77,90,共5页
采用热还原法和直接沉淀法分别制备纳米级铜粉与微米级β-PbO粉,考察其在合成润滑油PAO10中的摩擦学性能,并对摩擦磨损机制进行讨论。结果表明:加入2种粉体可明显提升PAO10的pB值,减小摩擦因数;纳米铜粉通过吸附与软化成膜等机制,氧化... 采用热还原法和直接沉淀法分别制备纳米级铜粉与微米级β-PbO粉,考察其在合成润滑油PAO10中的摩擦学性能,并对摩擦磨损机制进行讨论。结果表明:加入2种粉体可明显提升PAO10的pB值,减小摩擦因数;纳米铜粉通过吸附与软化成膜等机制,氧化铅通过解理成膜机制,降低了钢球摩擦过程中的黏着磨损和磨粒磨损,达到减摩抗磨的效果。 展开更多
关键词 β-PbO 聚α烯烃 摩擦磨损
下载PDF
Sulfidation mechanism of cerussite in the presence of sulphur at high temperatures 被引量:3
3
作者 GE Bao-liang PANG Jie +2 位作者 ZHENG Yong-xing NING Ji-lai Lü Jin-fang 《Journal of Central South University》 SCIE EI CAS CSCD 2020年第11期3259-3268,共10页
In this paper,sulfidation mechanism of cerussite in the presence of sulphur at high temperatures was investigated based on micro-flotation,X-ray powder diffractometry(XRD),electron probe microanalysis(EPMA)and X-ray p... In this paper,sulfidation mechanism of cerussite in the presence of sulphur at high temperatures was investigated based on micro-flotation,X-ray powder diffractometry(XRD),electron probe microanalysis(EPMA)and X-ray photoelectron spectroscopy(XPS).The micro-flotation test results showed that flotation recovery of the treated cerussite increased to above 80%under a suitable flotation condition.It was found that the S/PbCO3 mole ratio and pH obviously affected flotation recovery.XRD analysis results confirmed that the cerussite was decomposed into massicot and then was transformed into mainly PbS and PbO·PbSO4 after sulfidation roasting.EPMA analysis results demonstrated that surface of the obtained massicot was smooth,but surface of the artificial galena was rough and even porous.Content of oxygen decreased,whereas content of sulphur increased with an increase in the S/PbCO3 mole ratio.XPS analysis results revealed that various lead-bearing species,including mainly PbS,PbSO4 and PbO·PbSO4,were generated at the surface.Formation of PbS was advantageous to flotation of the treated cerussite.Based on these results,a reaction model of the cerussite sulfurized with sulphur was proposed. 展开更多
关键词 cerussite massicot ROASTING SULFIDATION FLOTATION
下载PDF
湿法液相合成α-PbO与β-PbO 被引量:1
4
作者 熊浩宇 黄魁 +2 位作者 卢远桓 刘玉玲 董海丽 《化工进展》 EI CAS CSCD 北大核心 2022年第1期435-442,共8页
铅酸蓄电池在我国有着广泛应用,其传统回收工艺存在环境污染、能耗高、回收流程长等问题。因此,湿法回收液相合成PbO工艺引起了人们的关注。本文基于乙酸铅溶液与NaOH反应液相合成PbO工艺,通过改变NaOH投加方式,合成α-PbO与β-PbO两种... 铅酸蓄电池在我国有着广泛应用,其传统回收工艺存在环境污染、能耗高、回收流程长等问题。因此,湿法回收液相合成PbO工艺引起了人们的关注。本文基于乙酸铅溶液与NaOH反应液相合成PbO工艺,通过改变NaOH投加方式,合成α-PbO与β-PbO两种晶型的PbO,并对合成条件及反应中间过程和机理进行初步探讨。实验以模拟脱硫铅膏制备的乙酸铅溶液为原料,探究了NaOH投加方式、反应温度、反应时间和NaOH与Pb摩尔比对PbO合成的影响。结果表明,乙酸铅溶液与NaOH反应液相合成PbO时,先生成中间产物Pb_(3)O_(2)(OH)2,Pb_(3)O_(2)(OH)2又快速分解为PbO,NaOH溶解放热过程参与反应会促进Pb_(3)O_(2)(OH)2向常温下更稳定的α-PbO分解转化。因此,通过改变NaOH的投加方式,可以得到α-PbO与β-PbO两种晶型的PbO。α-PbO合成条件为温度95℃,NaOH颗粒与等质量去离子水快速混合后投加,NaOH与Pb摩尔比n_(NaOH)/n_(Pb)=2.50,恒温搅拌20min;β-PbO的合成条件为温度95℃,投加提前一天配制的质量分数为50%的NaOH溶液,NaOH与Pb摩尔比n_(NaOH)/n_(Pb)=2.50,恒温搅拌20min。该研究可为废铅酸蓄电池湿法回收液相合成α-PbO与β-PbO提供理论参考。 展开更多
关键词 废铅酸蓄电池 废物处理 回收 合成 α-PbO β-PbO
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部