The mechanical properties and deformation mechanism of semi-continuously casting and as-extruded AZ70 magnesium alloys in a wide range of grain sizes(from 14 to 103μm)were investigated at 653 K and 1×10-3s -1.It...The mechanical properties and deformation mechanism of semi-continuously casting and as-extruded AZ70 magnesium alloys in a wide range of grain sizes(from 14 to 103μm)were investigated at 653 K and 1×10-3s -1.It is discovered that with reducing grain size,flow stress is weakened and plasticity is improved and even superplasticity exhibits.SEM and OM were used to clarify the deformation mechanism.It is suggested that dynamic recrystallization(DRX)is the coordination deformation mechanism of grain boundary sliding(GBS)for coarse grain,and cavity and intracrystalline slip are the coordination deformation mechanisms of GBS for fine grain.展开更多
The new near-αTNW700 titanium alloy is a potential candidate material for high performance ultrasonic/hypersonic aircrafts,which is designed for short-term service at 700℃.This study systematically investigated the ...The new near-αTNW700 titanium alloy is a potential candidate material for high performance ultrasonic/hypersonic aircrafts,which is designed for short-term service at 700℃.This study systematically investigated the superplastic deformation microstructure evolution and mechanism of TNW700 alloy at different strain rates and true strains at 925℃.Results show that TNW700 alloy exhibits excellent superplastic behavior in a constant strain rate range of 0.0005-0.005 s^(-1) with elongation above 400%.The peak stress decreases with decreasing strain rate,which is related to the increase ofβ-phase volume fraction caused by the increase of thermal exposure time.In addition,significant strain hardening is observed in early-middle stage of superplastic deformation,and flow softening is followed in middle-late stage.To rationalize these complex flow behaviors,electron backscatter diffraction(EBSD)and high resolution transmission electron microscopy(HRTEM)were used to characterize the microstructure.Strain hardening is correlated to the synergistic effect ofβgrain growth,dislocation accumulation,silicide precipitate,and solid solution strengthening ofαphase.Continuous dynamic recrystallization(CDRX)induced the fragmentation of primaryαgrains in middle-late stage of superplastic deformation,and the refinement ofαgrains,the increase ofβphase volume fraction and dynamic dislocation recovery are main causes of high strain softening.In addition,EBSD and TEM observations confirmed texture randomization,fine equiaxed primaryαgrains and intragranular dislocation movement,indicating that grain boundary sliding(GBS)accommodated by dislocation sliding/climb is the dominant superplastic deformation mechanism of TNW700 alloy.展开更多
基金Project(2008CB617509)supported by the National Basic Research Program of ChinaProject(30870634)supported by the National Natural Science Foundation of China
文摘The mechanical properties and deformation mechanism of semi-continuously casting and as-extruded AZ70 magnesium alloys in a wide range of grain sizes(from 14 to 103μm)were investigated at 653 K and 1×10-3s -1.It is discovered that with reducing grain size,flow stress is weakened and plasticity is improved and even superplasticity exhibits.SEM and OM were used to clarify the deformation mechanism.It is suggested that dynamic recrystallization(DRX)is the coordination deformation mechanism of grain boundary sliding(GBS)for coarse grain,and cavity and intracrystalline slip are the coordination deformation mechanisms of GBS for fine grain.
基金the support to this research work from the Aeronautical Science Foundation of China(No.201936051001)the Academic Excellence Foundation of BUAA for PhD Students。
文摘The new near-αTNW700 titanium alloy is a potential candidate material for high performance ultrasonic/hypersonic aircrafts,which is designed for short-term service at 700℃.This study systematically investigated the superplastic deformation microstructure evolution and mechanism of TNW700 alloy at different strain rates and true strains at 925℃.Results show that TNW700 alloy exhibits excellent superplastic behavior in a constant strain rate range of 0.0005-0.005 s^(-1) with elongation above 400%.The peak stress decreases with decreasing strain rate,which is related to the increase ofβ-phase volume fraction caused by the increase of thermal exposure time.In addition,significant strain hardening is observed in early-middle stage of superplastic deformation,and flow softening is followed in middle-late stage.To rationalize these complex flow behaviors,electron backscatter diffraction(EBSD)and high resolution transmission electron microscopy(HRTEM)were used to characterize the microstructure.Strain hardening is correlated to the synergistic effect ofβgrain growth,dislocation accumulation,silicide precipitate,and solid solution strengthening ofαphase.Continuous dynamic recrystallization(CDRX)induced the fragmentation of primaryαgrains in middle-late stage of superplastic deformation,and the refinement ofαgrains,the increase ofβphase volume fraction and dynamic dislocation recovery are main causes of high strain softening.In addition,EBSD and TEM observations confirmed texture randomization,fine equiaxed primaryαgrains and intragranular dislocation movement,indicating that grain boundary sliding(GBS)accommodated by dislocation sliding/climb is the dominant superplastic deformation mechanism of TNW700 alloy.
基金Fundamental Research Funds for the Central Universities(HHU2016B10314)Six Major Talent Peaks Project of Jiangsu Province of China(2014-XCL-023)Public Science&Technology Service Platform Program of Suqian City of China(M201614)
