Based on the plant model of 600-MW PWR,the molten core-concrete interactions(MCCI) under different models are studied.Station blackout (SBO) with steam-driven auxiliary feed water pump failure is selected as the case ...Based on the plant model of 600-MW PWR,the molten core-concrete interactions(MCCI) under different models are studied.Station blackout (SBO) with steam-driven auxiliary feed water pump failure is selected as the case for the model comparisons analysis.The result shows that thermal resistance model between debris and concrete has much influence on the consequence of MCCI.The concrete erosion rate calculated with gas film model is much higher than that of slag film model.Some other model comparisons such as the chemical reaction heat and the configuration molten pool are also discussed.展开更多
We investigated the simulation of the cracking and ablation behavior of ferro-siliceous and siliceous nuclear sacrificial concretes. To this end, four type of sacrificial concretes were fabricated, i e, the ferro-sili...We investigated the simulation of the cracking and ablation behavior of ferro-siliceous and siliceous nuclear sacrificial concretes. To this end, four type of sacrificial concretes were fabricated, i e, the ferro-siliceous（F） and siliceous（S） plain concretes, and the polypropylene fiber reinforced concretes of the above two（FF, SF）. The cracking and ablation behaviors of the sacrificial concretes were investigated by simulation tests, and the simulated elevated temperature was obtained by means of thermite powder. The number and the width of the cracks were compared and the pore size distribution of sacrificial concretes was measured. In addition, the interface and chemical composition of melt at different positions were analyzed, and the ablation depth of the sacrificial concrete crucibles was also measured. It was found that the siliceous concrete shows to be more prone to cracking than the ferro-siliceous concrete due to the higher content of fly ash and lower water to binder ratio; though the ablation depth of siliceous concrete is found to be slightly larger, no clear difference can be detected for the basemat ablation rate.展开更多
With the raise of voltage level in electric power grid,the phenomena of high voltage gas insulation has received extensive attention from all over the world.The research on the breakdown mechanism of vacuum which is t...With the raise of voltage level in electric power grid,the phenomena of high voltage gas insulation has received extensive attention from all over the world.The research on the breakdown mechanism of vacuum which is the main insulation gas in high voltage level is one of the most important issues.It is also important to the study of vacuum arc in vacuum switch.But for the limitations of available method used in analyzing the breakdown mechanism of vacuum,the main research on vacuum breakdown is macroscopic experiment.The experiments are greatly influenced by environmental factors and high vacuum degree is difficult to be ensured.So the data from the experiments are dispersive and the complex physical change in vacuum breakdown can not be revealed.The purpose of this work is to analyze the mechanism of vacuum breakdown quantitatively by microscopic numerical simulation.The particle in cell and Monte Carlo methods are used here to solve microscopic dynamic equation of gas.Based on the field emission theory in vacuum,electrons produced by the cathode and ions produced by the collision between electron and metal vapor molecule are the objects of this study.The motions of microscopic particles which are at the functions of the applied and self-consistent electric filed are traced in time and two space dimensions.Mont Carlo method is used here to cope with the collisions between electrons and metal vapor molecules.The cross sections of the collision which is related with the energy are all from the experiments.The secondary electron emission,exciting,elastic and ionizing collisions between electrons and metal vapor molecules have been considered in this paper.By the simulation,the number densities of electron and ion are acquired and the microscopic dynamic electric field produced by space charge is also calculated. The effect of vacuum degree on discharge voltage is also discussed here.According to the simulation data,we draw the conclusion that the main reason for vacuum arc formation is metal vapor ionization and large amount of metal gas is from high energy electrons' collision with the anode.展开更多
文摘Based on the plant model of 600-MW PWR,the molten core-concrete interactions(MCCI) under different models are studied.Station blackout (SBO) with steam-driven auxiliary feed water pump failure is selected as the case for the model comparisons analysis.The result shows that thermal resistance model between debris and concrete has much influence on the consequence of MCCI.The concrete erosion rate calculated with gas film model is much higher than that of slag film model.Some other model comparisons such as the chemical reaction heat and the configuration molten pool are also discussed.
基金Funded by National Natural Science Foundation of China(Nos.51378114 and 5161113020)National Basic Research Program of China(973 Program)(No.2015CB655105)
文摘We investigated the simulation of the cracking and ablation behavior of ferro-siliceous and siliceous nuclear sacrificial concretes. To this end, four type of sacrificial concretes were fabricated, i e, the ferro-siliceous（F） and siliceous（S） plain concretes, and the polypropylene fiber reinforced concretes of the above two（FF, SF）. The cracking and ablation behaviors of the sacrificial concretes were investigated by simulation tests, and the simulated elevated temperature was obtained by means of thermite powder. The number and the width of the cracks were compared and the pore size distribution of sacrificial concretes was measured. In addition, the interface and chemical composition of melt at different positions were analyzed, and the ablation depth of the sacrificial concrete crucibles was also measured. It was found that the siliceous concrete shows to be more prone to cracking than the ferro-siliceous concrete due to the higher content of fly ash and lower water to binder ratio; though the ablation depth of siliceous concrete is found to be slightly larger, no clear difference can be detected for the basemat ablation rate.
基金Supported by National Natural Science Foundation of China(50877048)Program for New Century Excellent Talents in University of China(NECT-08-0863)Key Scientific and Technological project of Liaoning Science and Technology Department (2010219016)
文摘With the raise of voltage level in electric power grid,the phenomena of high voltage gas insulation has received extensive attention from all over the world.The research on the breakdown mechanism of vacuum which is the main insulation gas in high voltage level is one of the most important issues.It is also important to the study of vacuum arc in vacuum switch.But for the limitations of available method used in analyzing the breakdown mechanism of vacuum,the main research on vacuum breakdown is macroscopic experiment.The experiments are greatly influenced by environmental factors and high vacuum degree is difficult to be ensured.So the data from the experiments are dispersive and the complex physical change in vacuum breakdown can not be revealed.The purpose of this work is to analyze the mechanism of vacuum breakdown quantitatively by microscopic numerical simulation.The particle in cell and Monte Carlo methods are used here to solve microscopic dynamic equation of gas.Based on the field emission theory in vacuum,electrons produced by the cathode and ions produced by the collision between electron and metal vapor molecule are the objects of this study.The motions of microscopic particles which are at the functions of the applied and self-consistent electric filed are traced in time and two space dimensions.Mont Carlo method is used here to cope with the collisions between electrons and metal vapor molecules.The cross sections of the collision which is related with the energy are all from the experiments.The secondary electron emission,exciting,elastic and ionizing collisions between electrons and metal vapor molecules have been considered in this paper.By the simulation,the number densities of electron and ion are acquired and the microscopic dynamic electric field produced by space charge is also calculated. The effect of vacuum degree on discharge voltage is also discussed here.According to the simulation data,we draw the conclusion that the main reason for vacuum arc formation is metal vapor ionization and large amount of metal gas is from high energy electrons' collision with the anode.
