The seedlings of Vernicia montana derived from seeds soaking with water (the first group)or 300 mg5L -1 mixed nitric_acid rare earth solution (the second group) were treated with various concentrations of mixed nitric...The seedlings of Vernicia montana derived from seeds soaking with water (the first group)or 300 mg5L -1 mixed nitric_acid rare earth solution (the second group) were treated with various concentrations of mixed nitric_acid rare earth solution by foliage spraying. The results showed that the seedling heights sprayed with 100 和 1 000 mg·L -1 of the first group and with 50 和 100 mg·L -1 of the second group were significantly higher than the controls, and the diameter at ground level sprayed with 300 mg·L -1 of the second group was significantly greater than the control, being 26.92% more than the latter; except for spraying with 0 mg5L -1 and 700～1 500 mg5L -1 of the second group, the seedling dry weight above ground of others was 29.13%～73.91% greater than the control, whereas the seedling dry weight under ground of others was 20.78%～116.88% greater than the control; the contents of chlorophyll a and chlorophyll b for all spraying seedling were 91.67%～191.67% and 87.5%～306.25% greater than the control, respectively, and soluble proteins and soluble sugars were 16.00%～179.78% and 10.73%～105.65% greater than the control, respectively. Compared with the control, the activity of SOD tended to increase, whereas the contents of MDA decreased. These indicated that spraying leaves with optimum concentration of mixed nitric_acid rare earth solution could markedly promote the growth of seedlings and improve resistance ability of V. montana seedlings to bad environment. On the whole, the effects of spraying the leaves of seedling with 50～500 mg5L -1 mixed nitric_acid rare earth solution, which were derived from seeds soaking with 300 mg·L -1 mixed nitric_acid rare earth solution, were good.展开更多
Improving structures involves comparing old and new designs on a key parameter.Calculating the percent change in performance is a method to assess.This paper proposes a cost-effective analogy by generating replicas of...Improving structures involves comparing old and new designs on a key parameter.Calculating the percent change in performance is a method to assess.This paper proposes a cost-effective analogy by generating replicas of additive manufactured aluminum alloy(Al Si10Mg)body-centered cubic lattice(BCC)based turbine blade(T106C)with the same in poly-lactic acid(PLA)material and their comparison in the context of percent change for natural frequencies.Initially,a cavity is created inside the turbine blade(hollow blade).Natural frequencies are obtained experimentally and numerically by incorporating BCC at 50%and 80%of the cavity length into the hollow blade for both materials.The cost of manufacturing the metal blades is 90%more than that of the PLA blades.The two material blade designs show a similar percentage variation,as the first-order mode enhancs more than 5%and the second-order mode more than 4%.To observe the behavior in another material,both blades are analyzed numerically with a nickel-based U-500 material,and the same result is achieved,describing that percent change between designs can be verified using the PLA material.展开更多
文摘The seedlings of Vernicia montana derived from seeds soaking with water (the first group)or 300 mg5L -1 mixed nitric_acid rare earth solution (the second group) were treated with various concentrations of mixed nitric_acid rare earth solution by foliage spraying. The results showed that the seedling heights sprayed with 100 和 1 000 mg·L -1 of the first group and with 50 和 100 mg·L -1 of the second group were significantly higher than the controls, and the diameter at ground level sprayed with 300 mg·L -1 of the second group was significantly greater than the control, being 26.92% more than the latter; except for spraying with 0 mg5L -1 and 700～1 500 mg5L -1 of the second group, the seedling dry weight above ground of others was 29.13%～73.91% greater than the control, whereas the seedling dry weight under ground of others was 20.78%～116.88% greater than the control; the contents of chlorophyll a and chlorophyll b for all spraying seedling were 91.67%～191.67% and 87.5%～306.25% greater than the control, respectively, and soluble proteins and soluble sugars were 16.00%～179.78% and 10.73%～105.65% greater than the control, respectively. Compared with the control, the activity of SOD tended to increase, whereas the contents of MDA decreased. These indicated that spraying leaves with optimum concentration of mixed nitric_acid rare earth solution could markedly promote the growth of seedlings and improve resistance ability of V. montana seedlings to bad environment. On the whole, the effects of spraying the leaves of seedling with 50～500 mg5L -1 mixed nitric_acid rare earth solution, which were derived from seeds soaking with 300 mg·L -1 mixed nitric_acid rare earth solution, were good.
基金supported by the National Natural Science Foundation of China(No.12111540251)。
文摘Improving structures involves comparing old and new designs on a key parameter.Calculating the percent change in performance is a method to assess.This paper proposes a cost-effective analogy by generating replicas of additive manufactured aluminum alloy(Al Si10Mg)body-centered cubic lattice(BCC)based turbine blade(T106C)with the same in poly-lactic acid(PLA)material and their comparison in the context of percent change for natural frequencies.Initially,a cavity is created inside the turbine blade(hollow blade).Natural frequencies are obtained experimentally and numerically by incorporating BCC at 50%and 80%of the cavity length into the hollow blade for both materials.The cost of manufacturing the metal blades is 90%more than that of the PLA blades.The two material blade designs show a similar percentage variation,as the first-order mode enhancs more than 5%and the second-order mode more than 4%.To observe the behavior in another material,both blades are analyzed numerically with a nickel-based U-500 material,and the same result is achieved,describing that percent change between designs can be verified using the PLA material.
