With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environmen...With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.展开更多
This research deals with an investigation of the adsorption of two acids, namely, 5-amino- 2-chlorotoluene-4-sulfonic and chlorhydric acids from their solution onto weakly basic resin. The screening of res-ins, kineti...This research deals with an investigation of the adsorption of two acids, namely, 5-amino- 2-chlorotoluene-4-sulfonic and chlorhydric acids from their solution onto weakly basic resin. The screening of res-ins, kinetics, and isotherm were studied. The results indicate that the D301R is more appropriate for the removal of acids from solution. The adsorption of acids obeys Langmuir isotherm and the first-order kinetics model. Sorptive affinity of the two acids on D301R was found to be in the order of 5-amino-2-chlorotoluene-4-sulfonic acid> chlorhydric acid. Thermodynamic parameters for the adsorption of acids were calculated and discussed. The maxi-mum removal of acids was observed around 97% and 76% at 25℃ for 5-amino-2-chlorotoluene-4-sulfonic acid and chlorhydric acid , respectively.展开更多
Organic substance such as solvent and resin's effect on luminescent capability of SrAl2O4:Eu2+ , Dy3+ phosphor was studied. Some organic solvents and resins were selected for experimentation. The results indicate ...Organic substance such as solvent and resin's effect on luminescent capability of SrAl2O4:Eu2+ , Dy3+ phosphor was studied. Some organic solvents and resins were selected for experimentation. The results indicate that those organic solvents will not have negative effect on the applied capability of SrAl2O4:Eu2+ , Dy3+ phosphor. Adopting the organic resins and covering method, the afterglow luminance of SrAl2O4:Eu2+ , Dy3+ phosphor was increased by 85.01% and 82.51%.展开更多
1 Introduction The Suzuki cross-coupling reaction is a powerful and versatile method for the generation of unsymmetrical biaryls from arylboronic acids and aryl halides in a single step. However, the reaction is usua...1 Introduction The Suzuki cross-coupling reaction is a powerful and versatile method for the generation of unsymmetrical biaryls from arylboronic acids and aryl halides in a single step. However, the reaction is usually performed in the presence of Pd catalyst along with phosphine ligand, which sometimes creates practical problems because organophosphines tend to be expensive, poisonous, and air sensitive. Recently, phos-phine-free ligands,展开更多
Objective To study the adsorption of 5-Amino-2-chlorotoluene-4-sulfonic (CLT) and chlorhydric (HCl) acids from wastewater by weakly basic resin. Methods The kinetics and isotherm were studied. Thermodynamic parameters...Objective To study the adsorption of 5-Amino-2-chlorotoluene-4-sulfonic (CLT) and chlorhydric (HCl) acids from wastewater by weakly basic resin. Methods The kinetics and isotherm were studied. Thermodynamic parameters for the adsorption of acids were calculated and discussed. Results The adsorption of CLT and HCl acids followed Langmuir isotherm and the first-order kinetics model. Conclusion The adsorptive affinity of the two acids on D301R is in the order of CLT acid 〉 HCl acid. CLT and HCl acids can be separated.展开更多
Cr(Ⅵ) was quantitatively adsorbed by D201×4 resin with pH=2.63～3.66 in the medium of HAc NaAc.The statically saturated sorption capacity is 156.8mg/g·resin.The sorption rate constant is k 298 =1.80×10...Cr(Ⅵ) was quantitatively adsorbed by D201×4 resin with pH=2.63～3.66 in the medium of HAc NaAc.The statically saturated sorption capacity is 156.8mg/g·resin.The sorption rate constant is k 298 =1.80×10 -4 s -1 .The apparent sorption activation energy of APAR for Cr(Ⅵ) is 7.21kJ·mol -1 .The themodynamic parameters of sorption:enthalpy change ΔH,free energy change ΔG and entropy change ΔS of sorption (D201×4) for Cr(Ⅵ) are 33.12kJ·mol -1 ,-28.36kJ·mol -1 ,206.3J·mol -1 ·K -1 ,respectively.Coordination molar ratio of the functional group of D201×4 to Cr(Ⅵ) is 1∶1.Cr(Ⅵ) adsorbed on D201×4 can be reductively eluated by 5% NH 4Cl-10% NH 3·H 2O.The sorption rate of D201×4 for Cr(Ⅵ) is fast.The equilibrium time of adsorption is five hours.展开更多
基金supported by the National Natural Science Foundation of China (No.52364022)the Natural Science Foundation of Guangxi Province,China (Nos.2023JJA160192 and 2021GXNSFAA220096)+1 种基金the Guangxi Science and Technology Major Project,China (No.AA23073018)the Guangxi Chongzuo Science and Technology Plan,China (No.2023ZY00503).
文摘With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.
基金Supported by the Natural Science Foundation of Jilin Province (No.990337).
文摘This research deals with an investigation of the adsorption of two acids, namely, 5-amino- 2-chlorotoluene-4-sulfonic and chlorhydric acids from their solution onto weakly basic resin. The screening of res-ins, kinetics, and isotherm were studied. The results indicate that the D301R is more appropriate for the removal of acids from solution. The adsorption of acids obeys Langmuir isotherm and the first-order kinetics model. Sorptive affinity of the two acids on D301R was found to be in the order of 5-amino-2-chlorotoluene-4-sulfonic acid> chlorhydric acid. Thermodynamic parameters for the adsorption of acids were calculated and discussed. The maxi-mum removal of acids was observed around 97% and 76% at 25℃ for 5-amino-2-chlorotoluene-4-sulfonic acid and chlorhydric acid , respectively.
文摘Organic substance such as solvent and resin's effect on luminescent capability of SrAl2O4:Eu2+ , Dy3+ phosphor was studied. Some organic solvents and resins were selected for experimentation. The results indicate that those organic solvents will not have negative effect on the applied capability of SrAl2O4:Eu2+ , Dy3+ phosphor. Adopting the organic resins and covering method, the afterglow luminance of SrAl2O4:Eu2+ , Dy3+ phosphor was increased by 85.01% and 82.51%.
基金Supported by the Zhejiang Province Natural Science Foundation,China(No.Y407240)
文摘1 Introduction The Suzuki cross-coupling reaction is a powerful and versatile method for the generation of unsymmetrical biaryls from arylboronic acids and aryl halides in a single step. However, the reaction is usually performed in the presence of Pd catalyst along with phosphine ligand, which sometimes creates practical problems because organophosphines tend to be expensive, poisonous, and air sensitive. Recently, phos-phine-free ligands,
基金The study was supported by the Nature Science Foundation of Jilin Province (No. 990337).
文摘Objective To study the adsorption of 5-Amino-2-chlorotoluene-4-sulfonic (CLT) and chlorhydric (HCl) acids from wastewater by weakly basic resin. Methods The kinetics and isotherm were studied. Thermodynamic parameters for the adsorption of acids were calculated and discussed. Results The adsorption of CLT and HCl acids followed Langmuir isotherm and the first-order kinetics model. Conclusion The adsorptive affinity of the two acids on D301R is in the order of CLT acid 〉 HCl acid. CLT and HCl acids can be separated.
文摘Cr(Ⅵ) was quantitatively adsorbed by D201×4 resin with pH=2.63～3.66 in the medium of HAc NaAc.The statically saturated sorption capacity is 156.8mg/g·resin.The sorption rate constant is k 298 =1.80×10 -4 s -1 .The apparent sorption activation energy of APAR for Cr(Ⅵ) is 7.21kJ·mol -1 .The themodynamic parameters of sorption:enthalpy change ΔH,free energy change ΔG and entropy change ΔS of sorption (D201×4) for Cr(Ⅵ) are 33.12kJ·mol -1 ,-28.36kJ·mol -1 ,206.3J·mol -1 ·K -1 ,respectively.Coordination molar ratio of the functional group of D201×4 to Cr(Ⅵ) is 1∶1.Cr(Ⅵ) adsorbed on D201×4 can be reductively eluated by 5% NH 4Cl-10% NH 3·H 2O.The sorption rate of D201×4 for Cr(Ⅵ) is fast.The equilibrium time of adsorption is five hours.
