The efficient extraction of sodium(Na^(+))and lithium(Li^(+))from seawater and salt lakes is increasingly demanding due to their great application value in chemical industries.However,coexisting cations such as divale...The efficient extraction of sodium(Na^(+))and lithium(Li^(+))from seawater and salt lakes is increasingly demanding due to their great application value in chemical industries.However,coexisting cations such as divalent calcium(Ca^(2+))and magnesium(Mg^(2+))ions are at the subnanometer scale in diameter,similar to target monovalent ions,making ion separation a great challenge.Here,we propose a simple and fast secondary growth method for the preparation of MIL-53(Al)-NH_(2)membranes on the surface of anodic aluminum oxide.Such membranes contain angstrom-scale(~7Å)channels for the entrance of small monovalent ions and water molecules,endowing the selectivities for monovalent cations over divalent cations and water over salt molecules.The resulting high-connectivity MIL-53(Al)-NH_(2)membranes exhibit excellent ion separation performance(a selectivity of 121.42 for Na^(+)/Ca^(2+)and 93.81 for Li^(+)/Mg^(2+))and desalination performance(a water/salt selectivity of up to 5196).This work highlights metal–organic framework membranes as potential candidates for realizing ion separation and desalination in liquid treatment.展开更多
Solid polymer composite electrolytes possess the benefits of superior compatibility with electrodes and good thermal characteristics for more secure energy storage equipment.Herein,a new gel polymer electrolyte(GPE)co...Solid polymer composite electrolytes possess the benefits of superior compatibility with electrodes and good thermal characteristics for more secure energy storage equipment.Herein,a new gel polymer electrolyte(GPE)containing NH_(2)-MIL-53(Al),[PP_(13)][TFSI],LiTFSI,and PVDF-HFP was prepared using a simple method of solution casting.The effects of encapsulating different ratios of ionic liquid([PP_(13)][TFSI])into the micropores of functionalized metal-organic frameworks(NH_(2)-MIL-53(Al))on the electrochemical properties were compared.XRD,SEM,nitrogen adsorption-desorption isotherms,and electrochemical measurements were conducted.This GPE demonstrates a superior ionic conductivity of 8.08×10^(-4)S·cm^(-1)at 60℃and can sustain a discharge specific capacity of 156.6 mA·h·g^(-1)at 0.2 C for over 100 cycles.This work might offer a potential approach to alleviate the solid-solid contact with the solid-state electrolyte and electrodes and broaden a new window for the creation of all-solid-state batteries.展开更多
通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier)负载纳米Pd催化剂.采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征.催化剂在反应前后XRD衍...通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier)负载纳米Pd催化剂.采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征.催化剂在反应前后XRD衍射峰保持不变,说明载体MIL-53(Al)具有良好的稳定性.采用TEM对催化剂进行表征,结果表明,MIL-53(Al)的多孔晶体结构有助于形成高度分散的纳米Pd颗粒,样品2.7%(w)Pd/MIL-53中Pd颗粒的平均粒径为2.21 nm.该催化剂在CO氧化反应中表现出较高的催化活性,115°C达到完全转化.同时催化剂可循环使用,多次反应后催化活性和催化剂结构都保持稳定.展开更多
采用溶剂法合成了热稳定性高的金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier),用此材料为载体负载钴催化剂用于CO的催化氧化反应,并与Al2O3负载的钴催化剂进行了对比.采用热重-差热扫描量热(TG-DSC)、傅里叶变换红...采用溶剂法合成了热稳定性高的金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier),用此材料为载体负载钴催化剂用于CO的催化氧化反应,并与Al2O3负载的钴催化剂进行了对比.采用热重-差热扫描量热(TG-DSC)、傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)、N2物理吸附-脱附、透射电子显微镜(TEM)、氢气程序升温还原(H2-TPR)等方法对催化剂的结构性质进行了表征.TG和N2物理吸附-脱附结果表明,载体MIL-53(Al)有好的稳定性和高的比表面积;XRD以及TEM结果表明Co/MIL-53(Al)上负载的Co3O4颗粒粒径(平均约为5.03 nm)明显小于Al2O3上Co3O4颗粒粒径(平均约为7.83 nm).MIL-53(Al)的三维多孔结构中分布均匀的位点能很好地分散固定Co3O4颗粒,高度分散的Co3O4颗粒有利于CO的催化氧化反应.H2-TPR实验发现Co/MIL(Al)催化剂的还原温度低于Co/Al2O3催化剂的还原温度,低的还原温度表现为高的催化氧化活性.CO催化氧化结果表明,MIL-53(Al)负载钴催化剂的催化活性明显高于Al2O3负载钴催化剂,MIL-53(Al)负载钴催化剂在160°C时使CO氧化的转化率达到98%,到180°C时CO则完全转化,催化剂的结构在催化反应过程中保持稳定.展开更多
Copper （II） dicarboxylate, MIL-53, metal-organic framework synthesized hydrothermally has been used for the first time as an adsorbent for methane gas adsorption. Methane adsorption capacity of MIL-53（Cu） was incr...Copper （II） dicarboxylate, MIL-53, metal-organic framework synthesized hydrothermally has been used for the first time as an adsorbent for methane gas adsorption. Methane adsorption capacity of MIL-53（Cu） was increased to about 8.52 mmol·g-1 at 298 K and 35 bar for methane storage. The adsorbent was characterized by X-ray diffraction （XRD）, Brunauer-Emmet-Teller （BET） method, Fourier transform infrared （FT-IR）, thermo gravimetric analysis （TGA） and scanning electron microscopy （SEM）. The adsorption property of CH4, on MIL-53（Cu） was investigated by volumetric measurement. The enhancement of CH4 adsorption capacity of MIL-53（Cu） is attributed to the increase of micropore volume of MIL-53（Cu）.展开更多
Metal-organic framework（MOF） material MIL-53（A1） with high thermal stability was prepared by a solvothermal method,serving as a support material of cerium doped copper catalyst（Ce-Cu）/MIL-53（A1） material for C...Metal-organic framework（MOF） material MIL-53（A1） with high thermal stability was prepared by a solvothermal method,serving as a support material of cerium doped copper catalyst（Ce-Cu）/MIL-53（A1） material for CO oxidation with high catalytic activity.The catalytic performance between the（CuCe）/MIL-53（A1） and the Cu/MIL-53（A1） catalytic material was compared to understand the catalytic behavior of the catalysts.The catalysts were characterized by thermogravimetric-differential scanning calorimetry（TGDSC）,N2 adsorption- desorption,X-ray diffraction（XRD）,and transmission electron microscopy（TEM）.The characterization results showed that MIL-53（A1） had good stability and high surface areas,the（Ce-Cu）nanoparticles on the MIL-53（A1） support was uniform.Therefore,the heterogeneous catalytic composite materials（Ce-Cu）/MIL-53（A1） catalyst exhibited much higher activity than that of the Cu/MIL- 53（A1） catalyst in CO oxidation test,with 100%conversion at 80 ℃.The results reveal that（Cu-Ce）/MIL-53（A1） is the suitable candidate for achieving low temperature and higher activity CO oxidation catalyst of MOFs.展开更多
基金supported by the Fundamental Research Funds for the Central Universities(WK2060000030)USTC Research Funds of the Double First Class Initiative(YD2060002022)Major Science and Technology Innovation Projects in Shandong Province(2022CXGC020415).
文摘The efficient extraction of sodium(Na^(+))and lithium(Li^(+))from seawater and salt lakes is increasingly demanding due to their great application value in chemical industries.However,coexisting cations such as divalent calcium(Ca^(2+))and magnesium(Mg^(2+))ions are at the subnanometer scale in diameter,similar to target monovalent ions,making ion separation a great challenge.Here,we propose a simple and fast secondary growth method for the preparation of MIL-53(Al)-NH_(2)membranes on the surface of anodic aluminum oxide.Such membranes contain angstrom-scale(~7Å)channels for the entrance of small monovalent ions and water molecules,endowing the selectivities for monovalent cations over divalent cations and water over salt molecules.The resulting high-connectivity MIL-53(Al)-NH_(2)membranes exhibit excellent ion separation performance(a selectivity of 121.42 for Na^(+)/Ca^(2+)and 93.81 for Li^(+)/Mg^(2+))and desalination performance(a water/salt selectivity of up to 5196).This work highlights metal–organic framework membranes as potential candidates for realizing ion separation and desalination in liquid treatment.
基金financially supported by National Natural Science Foundation of China(21701083)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX20_3137)。
文摘Solid polymer composite electrolytes possess the benefits of superior compatibility with electrodes and good thermal characteristics for more secure energy storage equipment.Herein,a new gel polymer electrolyte(GPE)containing NH_(2)-MIL-53(Al),[PP_(13)][TFSI],LiTFSI,and PVDF-HFP was prepared using a simple method of solution casting.The effects of encapsulating different ratios of ionic liquid([PP_(13)][TFSI])into the micropores of functionalized metal-organic frameworks(NH_(2)-MIL-53(Al))on the electrochemical properties were compared.XRD,SEM,nitrogen adsorption-desorption isotherms,and electrochemical measurements were conducted.This GPE demonstrates a superior ionic conductivity of 8.08×10^(-4)S·cm^(-1)at 60℃and can sustain a discharge specific capacity of 156.6 mA·h·g^(-1)at 0.2 C for over 100 cycles.This work might offer a potential approach to alleviate the solid-solid contact with the solid-state electrolyte and electrodes and broaden a new window for the creation of all-solid-state batteries.
基金The project was supported by the National Natural Science Foundation of China(21073235,21173270,21177160)National High-Tech Research and Development Program of China(863)(2013AA061902)~~
文摘通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier)负载纳米Pd催化剂.采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征.催化剂在反应前后XRD衍射峰保持不变,说明载体MIL-53(Al)具有良好的稳定性.采用TEM对催化剂进行表征,结果表明,MIL-53(Al)的多孔晶体结构有助于形成高度分散的纳米Pd颗粒,样品2.7%(w)Pd/MIL-53中Pd颗粒的平均粒径为2.21 nm.该催化剂在CO氧化反应中表现出较高的催化活性,115°C达到完全转化.同时催化剂可循环使用,多次反应后催化活性和催化剂结构都保持稳定.
文摘Copper （II） dicarboxylate, MIL-53, metal-organic framework synthesized hydrothermally has been used for the first time as an adsorbent for methane gas adsorption. Methane adsorption capacity of MIL-53（Cu） was increased to about 8.52 mmol·g-1 at 298 K and 35 bar for methane storage. The adsorbent was characterized by X-ray diffraction （XRD）, Brunauer-Emmet-Teller （BET） method, Fourier transform infrared （FT-IR）, thermo gravimetric analysis （TGA） and scanning electron microscopy （SEM）. The adsorption property of CH4, on MIL-53（Cu） was investigated by volumetric measurement. The enhancement of CH4 adsorption capacity of MIL-53（Cu） is attributed to the increase of micropore volume of MIL-53（Cu）.
基金Funded by the Guiding Research Project of Hubei Province Department of Education(No.B2016098)
文摘Metal-organic framework（MOF） material MIL-53（A1） with high thermal stability was prepared by a solvothermal method,serving as a support material of cerium doped copper catalyst（Ce-Cu）/MIL-53（A1） material for CO oxidation with high catalytic activity.The catalytic performance between the（CuCe）/MIL-53（A1） and the Cu/MIL-53（A1） catalytic material was compared to understand the catalytic behavior of the catalysts.The catalysts were characterized by thermogravimetric-differential scanning calorimetry（TGDSC）,N2 adsorption- desorption,X-ray diffraction（XRD）,and transmission electron microscopy（TEM）.The characterization results showed that MIL-53（A1） had good stability and high surface areas,the（Ce-Cu）nanoparticles on the MIL-53（A1） support was uniform.Therefore,the heterogeneous catalytic composite materials（Ce-Cu）/MIL-53（A1） catalyst exhibited much higher activity than that of the Cu/MIL- 53（A1） catalyst in CO oxidation test,with 100%conversion at 80 ℃.The results reveal that（Cu-Ce）/MIL-53（A1） is the suitable candidate for achieving low temperature and higher activity CO oxidation catalyst of MOFs.
