Spinel LiNi0.05Mn1.95O4 cathode material for lithium ion batteries was synthesized by solid-state reaction from coprecipitated Ni-Mn hydroxide precursors and characterized by X-ray diffraction(XRD),scanning electron m...Spinel LiNi0.05Mn1.95O4 cathode material for lithium ion batteries was synthesized by solid-state reaction from coprecipitated Ni-Mn hydroxide precursors and characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and galvanostatic charge-discharge tests. It is found that LiNi0.05Mn1.95O4 powder has an ordered cubic spinel phase(space group Fd 3m) and exhibits superior rate capability. After 450 cycles,the LiNi0.05Mn1.95O4/carbonaceous mesophase spheres(CMS) Li-ion batteries can retain 96.0% and 93.3% capacity at 5C and 10C charge/discharge rate,respectively,compared with 85.3%(5C) and 80.5%(10C) retention for LiMn2O4 batteries. However,the initial discharge capacity of LiNi0.05Mn1.95O4/CMS batteries at 1C charge/discharge rate(96.20 mA·h/g) is slightly lower than that of the LiMn2O4 batteries(100.98 mA·h/g) due to the increased average oxidation state of Mn in LiNi0.05Mn1.95O4.展开更多
This paper presents the predictability of aluminium-manganese alloy exposure time based on its as-cast weight and corrosion rate in sea water environment. The validity of the derived model: α = 26.67γ + 0.55β?- 0.2...This paper presents the predictability of aluminium-manganese alloy exposure time based on its as-cast weight and corrosion rate in sea water environment. The validity of the derived model: α = 26.67γ + 0.55β?- 0.29 is rooted on the core expression: 0.0375α = γ + 0.0206β?- 0.0109 where both sides of the expression are correspondingly approximately equal. Statistical analysis of model-predicted and experimentally evaluated exposure time for each value of as-cast weight and alloy corrosion rate considered shows a standard error of 0.0017% & 0.0044% and 0.0140% & 0.0150% respectively. The depths of corrosion penetration (at increasing corrosion rate: 0.0104 - 0.0157 mm/yr) as predicted by derived model and obtained from experiment are 0.7208 × 10-4 & 1.0123 × 10-4 mm and 2.5460 × 10-4 & 1.8240 × 10-4 mm (at decreasing corrosion rate: 0.0157 - 0.0062 mm/yr) respectively. Deviational analysis indicates that the maxi- mum deviation of the model-predicted alloy exposure time from the corresponding experimental value is less than 10%.展开更多
文摘Spinel LiNi0.05Mn1.95O4 cathode material for lithium ion batteries was synthesized by solid-state reaction from coprecipitated Ni-Mn hydroxide precursors and characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and galvanostatic charge-discharge tests. It is found that LiNi0.05Mn1.95O4 powder has an ordered cubic spinel phase(space group Fd 3m) and exhibits superior rate capability. After 450 cycles,the LiNi0.05Mn1.95O4/carbonaceous mesophase spheres(CMS) Li-ion batteries can retain 96.0% and 93.3% capacity at 5C and 10C charge/discharge rate,respectively,compared with 85.3%(5C) and 80.5%(10C) retention for LiMn2O4 batteries. However,the initial discharge capacity of LiNi0.05Mn1.95O4/CMS batteries at 1C charge/discharge rate(96.20 mA·h/g) is slightly lower than that of the LiMn2O4 batteries(100.98 mA·h/g) due to the increased average oxidation state of Mn in LiNi0.05Mn1.95O4.
文摘This paper presents the predictability of aluminium-manganese alloy exposure time based on its as-cast weight and corrosion rate in sea water environment. The validity of the derived model: α = 26.67γ + 0.55β?- 0.29 is rooted on the core expression: 0.0375α = γ + 0.0206β?- 0.0109 where both sides of the expression are correspondingly approximately equal. Statistical analysis of model-predicted and experimentally evaluated exposure time for each value of as-cast weight and alloy corrosion rate considered shows a standard error of 0.0017% & 0.0044% and 0.0140% & 0.0150% respectively. The depths of corrosion penetration (at increasing corrosion rate: 0.0104 - 0.0157 mm/yr) as predicted by derived model and obtained from experiment are 0.7208 × 10-4 & 1.0123 × 10-4 mm and 2.5460 × 10-4 & 1.8240 × 10-4 mm (at decreasing corrosion rate: 0.0157 - 0.0062 mm/yr) respectively. Deviational analysis indicates that the maxi- mum deviation of the model-predicted alloy exposure time from the corresponding experimental value is less than 10%.
