Absolute and relative gravity observations from 1998 -2010 from the China Crustal Movement Ob- servation Network, a major national scientific project, have been used to model the gravity field and its varia- tions ass...Absolute and relative gravity observations from 1998 -2010 from the China Crustal Movement Ob- servation Network, a major national scientific project, have been used to model the gravity field and its varia- tions associated with the April 14, 2010 Ms7.1 Yushu earthquake. The evolution of the regional gravity field and its relationship with seismicity before and after the Yushu earthquake are studied. The observed gravity changes are closely related to the active Ganzi-Yushu Fault, and gravity measurements can be used to observe the migration of material accompanying active faults and crustal tectonics. The dynamic variation of the gravity field reflects its evolution prior to and during the Yushu earthquake. The gravity measurements near its epicen- ter are as large as 80 × 10-s m/s2.and they show wave-like increases with time prior to the Yushu earth- quake.展开更多
The rapid identification based on InSAR technology was proved to be effective in our emergency investigation of surface ruptures and geohazards induced by the Yushu earthquake.The earthquake-generating fault of the Yu...The rapid identification based on InSAR technology was proved to be effective in our emergency investigation of surface ruptures and geohazards induced by the Yushu earthquake.The earthquake-generating fault of the Yushu earthquake is the Yushu section of the Garze-Yushu faults zone.It strikes NWW-NW,23 km long near the Yushu County seat,dominated by left-lateral strike slip,and appearing as a surface rupture zone.The macroscopic epicenter is positioned at Guo-yang-yan -song-duo of Gyegu Town（33°03＇11＂N,96°51＇26＂E）,where the co-seismic horizontal offset measured is 1.75 m.Geohazards induced by the Yushu earthquake are mainly rockfalls,landslides,debris flows, and unstable slopes.They are controlled by the earthquake-generating fault and are mostly distributed along it.There are several geohazard chains having been established,such as earthquake,canal damage,soil liquefying,landslide-debris flow,earthquake,soil liquefying,roadbed deformation,etc.In order to prevent seismic hazards,generally,where there is a visible surface rupture induced by the Yushu earthquake,reconstruction should be at least beyond 20 m,on each side,from it.Sufficient attention should also be given to potential geohazards or geohazard chains induced by the earthquake.展开更多
The 2010 Yushu MsT.1 earthquake occurred in Ganzi-Yushu fault, which is the south boundary of Bayan Har block. In this study, by using double difference algorithm, the locations of mainshock （33.13°N, 96.59°...The 2010 Yushu MsT.1 earthquake occurred in Ganzi-Yushu fault, which is the south boundary of Bayan Har block. In this study, by using double difference algorithm, the locations of mainshock （33.13°N, 96.59°E, focal depth 10.22 km） and more than 600 aftershocks were obtained. The focal mechanisms of the mainshock and some aftershocks with Ms〉3.5 were estimated by jointly using broadband velocity waveforms from Global Seismic Network （GSN） and Qinghai Seismic Network as well. The focal mechanisms and relocation show that the strike of the fault plane is about 125° （WNW-ESE）, and the mainshock is left-laterally strikeslip. The parameters of shear-wave splitting were obtained at seismic stations of YUS and L6304 by systematic analysis method of shear-wave splitting （SAM） method. Based on the parameters of shear-wave splitting and focal mechanism, the characteristics of stress field in seismic source zone were analyzed. The directions of polarization at stations YUS and L6304 are different. It is concluded that after the mainshock and the Ms6.3 aftershock on April 14, the stress-field was changed.展开更多
On April 14, 2010, a devastating earthquake measured 7.1 on the Richter scale struck Yushu county, Qinghai Province, China. Field geological investigation and remote sensing interpretation show that this earthquake ge...On April 14, 2010, a devastating earthquake measured 7.1 on the Richter scale struck Yushu county, Qinghai Province, China. Field geological investigation and remote sensing interpretation show that this earthquake generated an inverse ＂L-shaped＂ surface rupture zone, approximately 50km long. The surface rupture zone can be divided into three segments. Between the northern and middle segments of the surface rupture, there is a 16km-long segment, where no rupture was observed. The middle and the southern segments are arranged in a left-step manner, and there are right-step en echelon ruptures developed in the stepovers. The seismogenic structure is the Yushu fault, which is dominated by strike-slip with a small amount of thrust component. The earthquake results from the differential movements between the southern Qiangtang Block and northern Bayan Har Block. The earthquake recurrence interval is 185a^108a. Along an approximately 20km-long part of the Garze-Yushu fault, between the southern surface rupture of Yushu Ms7. 1 earthquake and the 1896 earthquake, there is no surface rupture, its seismic risk needs further research.展开更多
The authors studied the seismic activity, precursory anomalies and abnormal animal behavior before the April 14, 2010 Ms 7.1 Yushu earthquake. Analysis showed that anomalies were not rich before the Ms 7.1 Yushu earth...The authors studied the seismic activity, precursory anomalies and abnormal animal behavior before the April 14, 2010 Ms 7.1 Yushu earthquake. Analysis showed that anomalies were not rich before the Ms 7.1 Yushu earthquake, but prominent anomalies were observed, such as the long and mid-term trend anomaly characterized by the seismic quiescence of Ms6. 0, MsS. 0 and Ms4.0 earthquakes, and the anomalies in precursor observation of surface water temperature in Yushu and Delingha and electromagnetic measurement in Ping＇an. There were a large number of animal behavior anomalies appearing one week before the earthquake. An M4.7 earthquake occurred 130 minutes before the main shock. In this paper, we studied the dynamic process of the Yushu earthquake preparation using the earthquake focal mechanism solutions on the Bayan Har block boundary since 1996. The results show that the Kalakunlun M7.1 earthquake in 1996, the Mani M7.5 earthquake and the Yushu Ms7.1 earthquake have the same dynamic process. Long and mid-term trend anomalies may be related to the dynamics of evolution of different earthquakes. This paper also discusses the recurrence interval of strong earthquakes, foreshock identification and precursor observation of the Yushu Ms7. 1 earthquake.展开更多
Using the results of aftershock relocation, inversion on seismic waves and InSAR results, and surface rupture displacements obtained by geological survey after the earthquake, this paper constructs a fault model of th...Using the results of aftershock relocation, inversion on seismic waves and InSAR results, and surface rupture displacements obtained by geological survey after the earthquake, this paper constructs a fault model of the Yushu Ms7. 1 earthquake. Based on rectangular dislocation theory in an elastic-viscoelastic layered medium, we have simulated the co- seismic deformation and gravity change with gravitational effect considered. The pictures show that the absolute gravity measuring point is beside the extremum of coseismic gravity change, and the numerical value reaches 25.02 x 10-Sm. s-2. After a discussion about the gravity changes before the earthquake and the coherence consistency between two FG-5 absolute gravimeters, we think that the measured value 27.2 × 10^-8 m· s^-2 at Yushu station is coseismic gravity change. It＇s coincident with the simulation results based on dislocation theory. Therefore it is a good tool to test the near-field changes found by dislocation theory.展开更多
The coseismic surface rupture zone of the seismogenic fault of the Ms7.1 Yushu earthquake includes three left-stepping main ruptures, striking 300°- 320°, in general. An approximately 2km-long en echelon ten...The coseismic surface rupture zone of the seismogenic fault of the Ms7.1 Yushu earthquake includes three left-stepping main ruptures, striking 300°- 320°, in general. An approximately 2km-long en echelon tension fissure zone was found at Longbao town. The main rupture in the northern part is about 16km long, about 9kin long in the middle part, and about 7km long in the southern part, with a total length of 34km. Each of the main ruptures consists of a series of en echelon sub-ruptures represented by a series of compression bulges alternating with tension fissures or by en echelon fissures. The rupture at Changusi, the southernmost of the ruptures, is characterized by vertical displacement, with a value of 50cm. The rupture zone shows left-lateral strike-slip characteristics. The maximal horizontal slip is on the northern main rupture, with a value of 1.8m.展开更多
基金supported by the National Science and Technology Support Plan(2012BAK19B0102)the National Natural Science Foundation of China(41274083)State Key Laboratory of Geodesy and Earth's Dynamics,Institute of Geodesy and Geophysics,Chinese Academy of Sciences
文摘Absolute and relative gravity observations from 1998 -2010 from the China Crustal Movement Ob- servation Network, a major national scientific project, have been used to model the gravity field and its varia- tions associated with the April 14, 2010 Ms7.1 Yushu earthquake. The evolution of the regional gravity field and its relationship with seismicity before and after the Yushu earthquake are studied. The observed gravity changes are closely related to the active Ganzi-Yushu Fault, and gravity measurements can be used to observe the migration of material accompanying active faults and crustal tectonics. The dynamic variation of the gravity field reflects its evolution prior to and during the Yushu earthquake. The gravity measurements near its epicen- ter are as large as 80 × 10-s m/s2.and they show wave-like increases with time prior to the Yushu earth- quake.
基金supported by the National Natural Science Foundation of China(grant No.40902059)the Land Resource Survey Project of China Geological Survey (grant No.1212010914025,No.1212011014035)the Fundamental Research Fund of Institute of Geomechanics, CAGS(grant No.DZLXJK200906)
文摘The rapid identification based on InSAR technology was proved to be effective in our emergency investigation of surface ruptures and geohazards induced by the Yushu earthquake.The earthquake-generating fault of the Yushu earthquake is the Yushu section of the Garze-Yushu faults zone.It strikes NWW-NW,23 km long near the Yushu County seat,dominated by left-lateral strike slip,and appearing as a surface rupture zone.The macroscopic epicenter is positioned at Guo-yang-yan -song-duo of Gyegu Town（33°03＇11＂N,96°51＇26＂E）,where the co-seismic horizontal offset measured is 1.75 m.Geohazards induced by the Yushu earthquake are mainly rockfalls,landslides,debris flows, and unstable slopes.They are controlled by the earthquake-generating fault and are mostly distributed along it.There are several geohazard chains having been established,such as earthquake,canal damage,soil liquefying,landslide-debris flow,earthquake,soil liquefying,roadbed deformation,etc.In order to prevent seismic hazards,generally,where there is a visible surface rupture induced by the Yushu earthquake,reconstruction should be at least beyond 20 m,on each side,from it.Sufficient attention should also be given to potential geohazards or geohazard chains induced by the earthquake.
基金supported by basic research project of Institute of Earthquake Science of China Earthquake Science(No.2009-21)National Natural Science Foundation of China(No.41040034)
文摘The 2010 Yushu MsT.1 earthquake occurred in Ganzi-Yushu fault, which is the south boundary of Bayan Har block. In this study, by using double difference algorithm, the locations of mainshock （33.13°N, 96.59°E, focal depth 10.22 km） and more than 600 aftershocks were obtained. The focal mechanisms of the mainshock and some aftershocks with Ms〉3.5 were estimated by jointly using broadband velocity waveforms from Global Seismic Network （GSN） and Qinghai Seismic Network as well. The focal mechanisms and relocation show that the strike of the fault plane is about 125° （WNW-ESE）, and the mainshock is left-laterally strikeslip. The parameters of shear-wave splitting were obtained at seismic stations of YUS and L6304 by systematic analysis method of shear-wave splitting （SAM） method. Based on the parameters of shear-wave splitting and focal mechanism, the characteristics of stress field in seismic source zone were analyzed. The directions of polarization at stations YUS and L6304 are different. It is concluded that after the mainshock and the Ms6.3 aftershock on April 14, the stress-field was changed.
基金funded by National Key Basic Research and Development Program(grant No.2008CB42570),China
文摘On April 14, 2010, a devastating earthquake measured 7.1 on the Richter scale struck Yushu county, Qinghai Province, China. Field geological investigation and remote sensing interpretation show that this earthquake generated an inverse ＂L-shaped＂ surface rupture zone, approximately 50km long. The surface rupture zone can be divided into three segments. Between the northern and middle segments of the surface rupture, there is a 16km-long segment, where no rupture was observed. The middle and the southern segments are arranged in a left-step manner, and there are right-step en echelon ruptures developed in the stepovers. The seismogenic structure is the Yushu fault, which is dominated by strike-slip with a small amount of thrust component. The earthquake results from the differential movements between the southern Qiangtang Block and northern Bayan Har Block. The earthquake recurrence interval is 185a^108a. Along an approximately 20km-long part of the Garze-Yushu fault, between the southern surface rupture of Yushu Ms7. 1 earthquake and the 1896 earthquake, there is no surface rupture, its seismic risk needs further research.
基金funded by Earthquake Tendency Tracing of 2011 of Department of Monitoring and Prediction of CEA under the"Earthquake Short and Imminent Prediction Climb Program of2020"(2011016301)
文摘The authors studied the seismic activity, precursory anomalies and abnormal animal behavior before the April 14, 2010 Ms 7.1 Yushu earthquake. Analysis showed that anomalies were not rich before the Ms 7.1 Yushu earthquake, but prominent anomalies were observed, such as the long and mid-term trend anomaly characterized by the seismic quiescence of Ms6. 0, MsS. 0 and Ms4.0 earthquakes, and the anomalies in precursor observation of surface water temperature in Yushu and Delingha and electromagnetic measurement in Ping＇an. There were a large number of animal behavior anomalies appearing one week before the earthquake. An M4.7 earthquake occurred 130 minutes before the main shock. In this paper, we studied the dynamic process of the Yushu earthquake preparation using the earthquake focal mechanism solutions on the Bayan Har block boundary since 1996. The results show that the Kalakunlun M7.1 earthquake in 1996, the Mani M7.5 earthquake and the Yushu Ms7.1 earthquake have the same dynamic process. Long and mid-term trend anomalies may be related to the dynamics of evolution of different earthquakes. This paper also discusses the recurrence interval of strong earthquakes, foreshock identification and precursor observation of the Yushu Ms7. 1 earthquake.
基金funded by the National Natural Science Foundation of China(41104049)the Earthquake Situation Tracking,CEA(2012020207)Scientific Investigation of Yushu M S 7.1 Earthquake,CEA(2060302)
文摘Using the results of aftershock relocation, inversion on seismic waves and InSAR results, and surface rupture displacements obtained by geological survey after the earthquake, this paper constructs a fault model of the Yushu Ms7. 1 earthquake. Based on rectangular dislocation theory in an elastic-viscoelastic layered medium, we have simulated the co- seismic deformation and gravity change with gravitational effect considered. The pictures show that the absolute gravity measuring point is beside the extremum of coseismic gravity change, and the numerical value reaches 25.02 x 10-Sm. s-2. After a discussion about the gravity changes before the earthquake and the coherence consistency between two FG-5 absolute gravimeters, we think that the measured value 27.2 × 10^-8 m· s^-2 at Yushu station is coseismic gravity change. It＇s coincident with the simulation results based on dislocation theory. Therefore it is a good tool to test the near-field changes found by dislocation theory.
基金supported by special R&D project in earthquake science,Seismic risk assessment of active faults in the national key earthquake monitoring and prevention regions(20070851)
文摘The coseismic surface rupture zone of the seismogenic fault of the Ms7.1 Yushu earthquake includes three left-stepping main ruptures, striking 300°- 320°, in general. An approximately 2km-long en echelon tension fissure zone was found at Longbao town. The main rupture in the northern part is about 16km long, about 9kin long in the middle part, and about 7km long in the southern part, with a total length of 34km. Each of the main ruptures consists of a series of en echelon sub-ruptures represented by a series of compression bulges alternating with tension fissures or by en echelon fissures. The rupture at Changusi, the southernmost of the ruptures, is characterized by vertical displacement, with a value of 50cm. The rupture zone shows left-lateral strike-slip characteristics. The maximal horizontal slip is on the northern main rupture, with a value of 1.8m.
