期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
喷砂时间对TiCN/α-Al_(2)O_(3)/TiN涂层金属陶瓷刀片表面状态和磨损性能的影响
1
作者 游钱炳 李洪林 王勇燕 《工具技术》 北大核心 2024年第8期46-49,共4页
采用化学气相沉积法在金属陶瓷基体表面沉积了MT-TiCN/α-Al_(2)O_(3)/TiN涂层,再对CVD涂层金属陶瓷刀片进行喷砂处理,分析经不同喷砂时间处理后的涂层金属陶瓷刀片的表面形貌、力学性能以及耐磨性能。结果表明:喷砂时间对涂层金属陶瓷... 采用化学气相沉积法在金属陶瓷基体表面沉积了MT-TiCN/α-Al_(2)O_(3)/TiN涂层,再对CVD涂层金属陶瓷刀片进行喷砂处理,分析经不同喷砂时间处理后的涂层金属陶瓷刀片的表面形貌、力学性能以及耐磨性能。结果表明:喷砂时间对涂层金属陶瓷刀片表面的冲蚀程度影响较大。未经喷砂处理的涂层表面粗糙度较高且存在较大的残余拉应力,而喷砂处理后的涂层金属陶瓷刀片的表面粗糙度与表面残余应力大幅下降,且表面硬度和耐磨性大幅提高。当喷砂时间为10s时,涂层金属陶瓷刀片获得了最低的表面粗糙度,与未喷砂的涂层刀片相比,表面残余拉应力降低了85%。基于不同喷砂时间处理后的涂层表面粗糙度、硬度、残余应力以及后刀面磨损形貌,得到的最佳喷砂时间为10s。 展开更多
关键词 喷砂时间 mt-ticn/α-al_(2)o_(3)/tin涂层 金属陶瓷 磨损性能
下载PDF
Oxidation Behavior of Pd-Modified Aluminide Coating at High Temperature 被引量:1
2
作者 Mengjin LI, Xiaofeng SUN, Hengrong GUAN, Xiaoxia JIANG Zhuangqi HUState Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2003年第3期213-217,共5页
(Ni,Pd)AI coating, prepared by low pressure pack cementation on the Ni-base superalloy M38 where Pd-20 wt pct Ni alloy was predeposited, consists of a single β-(Ni,Pd)AI phase. The initial isothermal oxidation behavi... (Ni,Pd)AI coating, prepared by low pressure pack cementation on the Ni-base superalloy M38 where Pd-20 wt pct Ni alloy was predeposited, consists of a single β-(Ni,Pd)AI phase. The initial isothermal oxidation behavior of (Ni,Pd)AI coating was investigated by TGA, XRD, SEM/EDS at 800-1100℃. Results show that oxidation kinetics accord preferably with parabolic law at 800, 900 and 1100℃, but not at 1000℃. θ-AI203 was observed at 800-1100℃. It is found that Pd plays an important role in accelerating the diffusion of Ti from the substrate to the coating surface in the aluminide coating. 展开更多
关键词 (Ni Pd)Al coating High temperature oxidation oxidation kinetics θ-al_2o_3
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部