Mineral Chemistry,Trace Elements,Isotopic Analysis and Zircon U-Pb Dating in the Hesar Pluton,Northern UDMA,Iran:Implications for Pre-Collisional Magma Mixing

The Hesar pluton in the northern Urumieh-Dokhtar magmatic arc hosts numerous mafic-microgranular enclaves(MMEs).Whole rock geochemistry,mineral chemistry,zircon U-Pb and Sr-Nd isotopes were measured.It is suggested that the rocks are metaluminous(A/CNK=1.32-1.45),subduction-related I-type calc-alkaline gabbro to diorite with similar mineral assemblages and geochemical signatures.The host rocks yielded an U-Pb crystallization age of 37.3±0.4 Ma for gabbro-diorite.MMEs have relatively low SiO_(2) contents(52.9-56.6 wt%)and high Mg^(#)(49.8-58.7),probably reflecting a mantle-derived origin.Chondrite-and mantle-normalized trace element patterns are characterized by LREE and LILE enrichment,HREE and HFSE depletion with slight negative Eu anomalies(Eu/Eu^(*)=0.86-1.03).The host rocks yield(^(87)Sr/^(86)Sr)_(i) ratios of 0.70492-0.70510,positive ε_(Nd)(t)values of+1.55-+2.06 and T_(DM2)of 707-736 Ma,which is consistent with the associated mafic microgranular enclaves((^(87)Sr/^(86)Sr)_(i)=0.705014,ε_(Nd)(t)=+1.75,T_(DM2)=729 Ma).All data suggest magma-mixing for enclave and host rock formation,showing a complete equilibration between mixed-mafic and felsic magmas,followed by rapid diffusion.The T_(DM1)(Nd)and T_(DM2)(Nd)model ages and U-Pb dating indicate that the host pluton was produced by partial melting of the lower continental crust and subsequent mixing with injected lithospheric mantlederived magmas in a pre-collisional setting of Arabian-Eurasian plates.Clinopyroxene composition indicates a crystallization temperature of~1000℃ and a depth of~9 km.

Contrasting oxidation states of low-Ti and high-Ti magmas control Ni-Cu sulfide and Fe-Ti oxide mineralization in Emeishan Large Igneous Province

Magmatic Ni-Cu-(PGE) sulfide and Fe-Ti oxide deposits in plume-related large igneous provinces(LIPs)are commonly related to low-Ti and high-Ti series magmas, respectively, but the major factors that control such a relationship of metallogenic types and magma compositions are unclear. Magma fOcontrols sulfur status and relative timing of Fe-Ti oxide saturation in mafic magmas, which may help clarify this issue. Taking the Emeishan LIP as a case, we calculated the magma fOof the high-Ti and low-Ti picrites based on the olivine-spinel oxygen barometer, and the partitioning of V in olivine. The obtained fOof the high-Ti series magma(FMQ + 1.1 to FMQ + 2.6) is higher than that of the low-Ti series magma(FMQ-0.5to FMQ + 0.5). The magma fOof the high-Ti and low-Ti picrites containing Fo > 90 olivine reveals that the mantle source of the high-Ti series is likely more oxidized than that of the low-Ti series. The results using the ’lambda REE’ approach show that the high-Ti series may have been derived from relatively oxidized mantle with garnet pyroxenite component. The S contents at sulfide saturation(SCSS) of the two series magmas were calculated based on liquid compositions obtained from the alpha Melts modeling, and the results show that the low-Ti series magma could easily attain the sulfide saturation as it has low fOwith S being dominantly as S. In contrast, the oxidized high-Ti series magma is difficult to attain the sulfide saturation, but could crystallize Fe-Ti oxides at magma MgO content of ~7.0 wt.%. Thus, contrasting magma fOof low-Ti and high-Ti series in plume-related LIPs may play an important role in producing two different styles of metallogeny.

Petrology,geochemistry,and crystal size distribution of the basaltic andesite-dacite association at Mt.Sumbing,Central Java,Indonesia:Insights to magma reservoir dynamics and petrogenesis

Ten rock samples consisting of one pyroclastic density current(PDC1)deposit,seven lava flows(LF1–7),and two summit lava domes(LD1,2)were studied to understand the petrogenesis and magma dynamics at Mt.Sumbing.The stratigraphy is arranged as LF1,PDC1,LF2,LF3,LF4,LF5,LF6,LF7,LD1,and LD2;furthermore,these rocks were divided into two types.TypeⅠ,observed in the oldest(LF1)sample,has poor MgO and high Ba/Nb,Th/Yb and Sr.The remaining samples(PDC1–LD2)represent typeⅡ,characterized by high MgO and low Ba/Nb,Th/Yb and Sr values.We suggest that type I is derived from AOC(altered oceanic crust)-rich melts that underwent significant crustal assimilation,while typeⅡoriginates from mantle-rich melts with less significant crustal assimilation.The early stage of typeⅡmagma(PDC1–LF3)was considered a closed system,evolving basaltic andesite into andesite(55.0–60.2 wt%SiO_(2))with a progressively increasing phenocryst(0.30–0.48φ_(PC))and decreasing crystal size distribution(CSD)slope(from-3.9 to-2.9).The evidence of fluctuating silica and phenocryst contents(between 55.9–59.7 wt%and 0.25–0.41φ_(PC),respectively),coupled with the kinked and steep(from-5.0 to-3.3)CSD curves imply the interchanging condition between open(i.e.,magma mixing)and closed magmatic systems during the middle stage(LF4–LF6).Finally,it underwent to closed system again during the final stage(LF7–LD2)because the magma reached dacitic composition(at most 68.9 wt%SiO_(2))with abundant phenocryst(0.38–0.45φ_(PC))and gentle CSD slope(from-4.1 to-1.2).

Source Enrichment Control on the Scale of Magmatic-Hydrothermal W-Sn Mineralization:Insights from Triassic and Jurassic Magma Reservoirs in the Continental Crust,Xitian,South China

There are two factors,source composition and magmatic differentiation,potentially controlling W-Sn mineralization.Which one is more important is widely debated and may need to be determined for each individual deposit.The Xitian granite batholith located in South China is a natural laboratory for investigating the above problem.It consists essentially of two separate components,formed in the Triassic at ca.226 Ma and Jurassic at ca.152 Ma,respectively.The Triassic and Jurassic rocks are both composed of porphyritic and fine-grained phases.The latter resulted from highlydifferentiated porphyritic ones but they have similar textural characteristics and mineral assemblages,indicating that they reached a similar degree of crystal fractionation.Although both fine-grained phases are highly differentiated with elevated rare metal contents,economic W–Sn mineralization is rare in the Triassic granitoids and this can be attributed to less fertile source materials than their Jurassic counterparts,with a slightly more enriched isotopic signature and whole-rockεNd(226 Ma)of−10.4 to−9.2(2σ=0.2)compared withεNd(152 Ma)of−9.2 to−8.2(2σ=0.2)for the Jurassic rocks.The initial W-Sn enrichment was derived from the metasedimentary rocks and strongly enhanced by reworking of the continental crust,culminating in the Jurassic.

In situ U-Pb dating and trace elements of magmatic rutile from Mujicun Cu-Mo deposit,North China Craton:Insights into porphyry mineralization

Porphyry Cu(Mo-Au)deposit is one of the most important types of copper deposit and usually formed under magmatic arc-related settings,whilst the Mujicun porphyry Cu-Mo deposit in North China Craton uncommonly generated within intra-continental settings.Although previous studies have focused on the age,origin and ore genesis of the Mujicun deposit,the ore-forming age,magma source and tectonic evolution remain controversial.Here,this study targeted rutile(TiO_(2))in the ore-hosting diorite porphyry from the Mujicun Cu-Mo deposit to conduct in situ U-Pb dating and trace element composition studies,with major views to determine the timing and magma evolution and to provide new insights into porphyry Cu-Mo metallogeny.Rutile trace element data show flat-like REE patterns characterized by relatively enrichment LREEs and depleted HREEs,which could be identified as magmatic rutile.Rutile U-Pb dating yields lower intercept ages of 139.3–138.4 Ma,interpreted as post magmatic cooling timing below about 500℃,which are consistent or slightly postdate with the published zircon U-Pb ages of diorite porphyry(144.1–141.7 Ma)and skarn(146.2 Ma;139.9 Ma)as well as the molybdenite Re-Os ages of molybdenum ores(144.8–140.0 Ma).Given that the overlap between the closure temperature of rutile U-Pb system and ore-forming temperature of the Mujicun deposit,this study suggests that the ore-forming ages of the Mujicun deposit can be constrained at 139.3–138.4 Ma,with temporal links to the late large-scale granitic magmatism at 138–126 Ma in the Taihang Orogen.Based on the Mg and Al contents in rutile,the magma of ore-hosting diorite porphyry was suggested to be derived from crust-mantle mixing components.In conjunction with previous studies in Taihang Orogen,this study proposes that the far-field effect and the rollback of the subducting Paleo-Pacific slab triggered lithospheric extension,asthenosphere upwelling,crust-mantle interaction and thermo-mechanical erosion,which jointly facilitated the formation of dioritic magmas during the Early Cretaceous.Subsequently,the dioritic magmas carrying crust-mantle mixing metallic materials were emplaced and precipitated at shallow positions along NNE-trending ore-controlling faults,eventually resulting in the formation of the Mujicun Cu-Mo deposit within an intracontinental extensional setting.

Magma Mixing Genesis of the Mafic Enclaves and Related Granitoids in the Kan Granite-Gneiss Complex of Central Côte d’Ivoire: Evidence from Geology, Petrology and Geochemistry

The mafic enclaves from Paleoproterozoic domain are considered to be the results of large-scale crust-mantle interaction and magma mixing. In this paper, petrography, mineralogy and geochemistry were jointly used to determine the origin of the mafic enclaves and their relationship with the host granitoids of the Kan granite-gneiss complex. This study also provides new information on crust-mantle interactions. The mafic enclaves of the Kan vary in shape and size and have intermediate chemical compositions. The diagrams used show a number of similarities in the major elements (and often in the trace elements) between the mafic enclaves and the host granitoids. Geochemical show that the Kan rock are metaluminous, enriched in silica, medium to high-K calc-alkaline I-type granite. The similarities reflect a mixing of basic and acid magma. Mafic enclaves have a typical magmatic structure, which is characterized by magma mixing. The genesis of these rocks is associated with the context of subduction. They result from the mixing of a mafic magma originating from the mantle and linked to subduction, and a granitic magma (type I granite) that arises from the partial melting of the crust.

The Applicability and Productiveness of a Systematic Literature Review Methodology in Volcanology Research: Case of the Magma Pathway at the Mount Cameroon Volcano

The presented research illustrates the applicability and productiveness of the systematic literature review methodology, a non-empirical methodology in the geological sciences, particularly volcanology. The systematic literature review methodology is a replicable, rigorous, and transparent methodology for synthesizing existing literature to answer questions on a specific topic. The synthesis allows for knowledge consolidation, such as identifying knowledge gaps. In our illustration of this methodology, we focused on the expanding knowledge about the magma pathway at Mount Cameroon, one of Africa’s active volcanoes. Our synthesis of the relevant international geoscience research literature is based on the framework of knowledge about the magma pathway beneath a typical basaltic volcano. The framework has three primary components: magma supply, storage, and transport to erupting vents. Across these components is a total of twelve secondary components. The result is a previously non-existent and fragmented overall understanding of the magma pathway at Mount Cameroon. The gaps in the understanding (such as in the magma supply rates, timescales of chamber processes, and magma ascent rates) may be addressed in future research. Another key implication of the presented research lies in the proof of concept of the systematic literature review methodology as an applicable qualitative research methodology in the study of volcanoes.

基于MAGMA软件的支架铸造工艺优化

以EMD大功率内燃机车支架为例,应用MAGMA模拟软件,采用温度场模拟分析和凝固补缩模拟分析,优化了铸钢件铸造工艺.根据优化后的铸造工艺方案,进行了试生产,通过解剖分析、鉴定,未发现缩孔缺陷,验证了铸造方案的可行性.采用计算机模拟浇注取代传统的试生产后验证的方法,降低了新产品的试制成本,缩短了试制周期.

基于MAGMA的球铁齿轮箱铸造工艺设计

针对球铁齿轮箱,进行了铸造工艺设计,并利用MAGMA分析软件进行了流动场、凝固场分析验证,成功地实现了该产品的批量生产,为同类产品的工艺设计提供了参考依据。

基于MAGMA的球墨铸铁铸造工艺裕度分析

基于MAGMA的模拟计算,研究40 mm×200 mm×100 mm试块在不同浇注温度、砂型刚度、孕育和石墨析出的条件下缩松行为。模拟研究表明:石墨析出率和孕育效果变化对铸件缩松形成有明显影响,浇注温度变化对铸件缩松的形成影响较小,即石墨析出和孕育方式的工艺裕度小,浇注温度的工艺裕度较大,这与试验结果基本一致;MAGMA对砂型刚度对铸件缩松形成影响的模拟结果与试验不符。

基于Magma的高压铸造模具温度场模拟分析

以汽车变速箱体零件为模型,运用Magma软件。模拟变速箱体在铸造过程中的充型流态,并对模具进行温度场模拟,分析定模、动模在喷涂前后的温度场状况。通过多组的工艺参数组合模拟,最后得到较好的模拟状态。由生产试验得知,在模具实时温度控制中,参数化调节是困难的。通过先行在Magma中模拟缩小工艺参数区间,将模拟的参数复制到压铸机上,通过微调得到理想模具温度,解决产品压铸的品质问题。能有效降低产品报废率,提高设备综合效率。

Magmatic Ni-Cu-(PGE) deposits in magma plumbing systems:Features,formation and exploration

The three most crucial factors for the formation of large and super-large magmatic sulfide deposits are： （1） a large volume of mantle-derived mafic-ultramafic magmas that participated in the formation of the deposits; （2） fractional crystallization and crustal contamination, particularly the input of sulfur from crustal rocks, resulting in sulfide immiscibility and segregation; and （3） the timing of sulfide concentration in the intrusion. The super-large magmatic Ni-Cu sulfide deposits around the world have been found in small mafic-ultramafic intrusions, except for the Sudbury deposit. Studies in the past decade indicated that the intrusions hosting large and super-large magmatic sulfide deposits occur in magma conduits, such as those in China, including Jinchuan （Gansu）, Yangliuping （Sichuan）, Kalatongke （Xinjiang）, and Hongqiling （Jilin）. Magma conduits as open magma systems provide a perfect environment for extensive concentration of immiscible sulfide melts, which have been found to occur along deep regional faults. The origin of many mantle-derived magmas is closely associated with mantle plumes, intracontinental rifts, or post-collisional extension. Although it has been confirmed that sulfide immiscibility results from crustal contamination, grades of sulfide ores are also related to the nature of the parental magmas, the ratio between silicate magma and immiscible sulfide melt, the reaction between the sulfide melts and newly injected silicate magmas, and fractionation of the sulfide melt. The field relationships of the ore-bearing intrusion and the sulfide ore body are controlled by the geological features of the wall rocks. In this paper, we attempt to demonstrate the general characteristics, formation mechanism,tectonic settings, and indicators of magmatic sulfide deposits occurring in magmatic conduits which would provide guidelines for further exploration.

Early Cretaceous Magma Mingling in Xiaocuo,Southeastern China Continental Margin:Implications for Subduction of Paleo-Pacific Plate

Magma mingling has been identified within the continental margin of southeastern China.This study focuses on the relationship between mafic and felsic igneous rocks in composite dikes and plutons in this area,and uses this relationship to examine the tectonic and geodynamic implications of the mingling of mafic and felsic magmas.Mafic magmatic enclaves（MMEs） show complex relationships with the hosting Xiaocuo granite in Fujian area,including lenticular to rounded porphyritic microgranular enclaves containing abundant felsic/mafic phenocrysts,elongate mafic enclaves,and back-veining of the felsic host granite into mafic enclaves.LA-ICP-MS zircon U-Pb analyses show crystallization of the granite and dioritic mafic magmatic enclave during ca.132 and 116 Ma.The host granite and MMEs both show zircon growth during repeated thermal events at-210 Ma and 160-180 Ma.Samples from the magma mingling zone generally contain felsic-derived zircons with well-developed growth zoning and aspect ratios of 2-3,and maficderived zircons with no obvious oscillatory zoning and with higher aspect ratios of 5-10.However,these two groups of zircons show no obvious trace element or age differences.The Hf-isotope compositions show that the host granite and MMEs have similar ε（Hf）（t） values from negative to positive which suggest a mixed source from partial melting of the Meso-Neoproterozoic with involvement of enriched mantlederived magmas or juvenile components.The lithologies,mineral associations,and geochemical characteristics of the mafic and felsic rocks in this study area indicate that both were intruded together,suggesting Early Cretaceous mantle—crustal interactions along the southeastern China continental margin.The Early Cretaceous magma mingling is correlated to subduction of Paleo-Pacific plate.

MAGMA软件辅助分析解决金属型薄壁铝合金壳体厚大部位的缩松缺陷

使用MAGMA软件对薄壁铝合金壳体低压砂芯金属型铸造的凝固过程进行模拟分析,发现通过在铸件局部厚大部位对应的金属型位置上设置紫铜镶块,同时在紫铜镶块与金属型间设置排气通道,可有效加强厚大部位的冷却速度和排气效果,减少薄壁铸件局部厚大部位产生缩松缺陷的可能性。

On Magma-Genetic Characteristics of Skarn and Its Formation Mechanism

For skarn type deposits , there are two lands of skarns , skarn formed by filtrating-diffusing metasomatism and vein skarn formed by filling . The vein skarn , discussed this paper and considered to be magmatic genesis , is characterized by: (1) occurring as vein with distinct boundaries with country rocks , yet just the same even in marble easy to be replaced ; (2) composed of a mineral assemblage similar to that of granite ,containing pegmatite as wen as coarse skarn mineral pockets ,and sometimes transited with dike rocks ; (3) dear crystalline feature of deposition ; (4) sideronitic texture ; (5) stowing vesicular, bean-like and flow structures ; (6) very common liquid immiscibility; (7) vertical zoning of gravitational differentiation caused by volatile concentration upwards; (8) associated and transited with non-copper ore bodies of magmatic genesis and tungsten-bearing quartz veins of silicate magmatic genesis rich in volatile ; (9) melt inclusions . Two origins of skam magma . originated by assimilation of silicate magma at its emplacemeot or below it and generated owe to assimilation of deep magma ,corrosion of carbonate strata and liquation , are presented .

Petro Gram: An excel-based petrology program for modeling of magmatic processes

Petro Gram is an Excel?based magmatic petrology program that generates numerical and graphical models.Petro Gram can model the magmatic processes such as melting,crystallization,assimilation and magma mixing based on the trace element and isotopic data.The program can produce both inverse and forward geochemical models for melting processes(e.g.forward model for batch,fractional and dynamic melting,and inverse model for batch and dynamic melting).However,the program uses a forward modeling approach for magma differentiation processes such as crystallization(EC:Equilibruim Crystallization,FC:Fractional Crystallization,IFC:Imperfect Fractional Crystallization and In-situ Crystallization),assimilation(AFC:Assimilation Fractional Crystallization,Decoupled FC-A:Decoupled Fractional Crystallization and Assimillation,A-IFC:Assimilation and Imperfect Fractional Crystallization)and magma mixing.One of the most important advantages of the program is that the melt composition obtained from any partial melting model can be used as a starting composition of the crystallization,assimilation and magma mixing.In addition,Petro Gram is able to carry out the classification,tectonic setting,multi-element(spider)and isotope correlation diagrams,and basic calculations including Mg^#,Eu/Eu^*,εSrandεNdwidely used in magmatic petrology.

基于MAGMA的发动机缸体铸造工艺优化

发动机缸体作为汽车的核心部件之一,其质量优劣直接决定了汽油机的性能和工作寿命。为了提高发动机缸体性能,对NT型发动机缸体的铸造工艺进行设计,并采用MAGMA模拟软件对初步设计工艺进行模拟优化。在此过程中,通过MAGMA软件重点研究了缸体在铸造过程中的充型性、液相残余和缺陷分布,分析了充型不平稳以及缺陷产生的原因,随后以此作为重要依据,优化设计了铸件的浇冒口系统。经模拟验证,该优化工艺能够解决铸件液态成型时存在的问题,最终确定了合理的发动机缸体铸造工艺参数。

Origin and evolution of alkali basaltic magma in the Okinawa Trough

The contents of major element composition of the phenocrysts and the matrix glass as well as the spinel inclusions and the melt inclusion in the phenocrysts of the basalt dredged from Station 133 of the Okinawa Trough are determined by electron microprobe. The results show that the basalt is a dor- galite consisting of phenocrysts of bytownite, chrysolite, clinopyroxene and magnetite as well as labradorite microcrystal, matrix glass and a few bits of broken vein quartz. Glassy melt inclusion and chromohercynite or chrompleonaste exist in bytownite and chrysolite. The formation of the spinels is re- lated to partial melting of mantle. The melt inclusions stand for a primary alkali dorgalitic magma, whose composition corresponds to olivine gabbro. The basaltic magma was generated from partial melting of spinel-lherzolite of the upper mantle and evolved in a process of 'alkali dorgalitic magma-trachy- basaltic magma-basdaltic trachytic magma-trachytic magma'. Assimilation and hybridization of crustal material may exist during magma upwelling in every evolutionary stage.

Crystallization Conditions and Mineral Chemistry in the East of Tafresh, Central Iran, with Insights into Magmatic Processes

The Tafresh granitoids are located at the central part of the Urumieh-Dokhtar Magmatic Arc(UDMA)in Iran.These rocks,mainly consisting of diorite and granodiorite,were emplaced during the Early Miocene.They are composed of varying proportions of plagioclase+K-feldspar+hornblende±quartz±biotite.Discrimination diagrams and chemical indices of amphibole phases reveal a calc-alkaline affinity and fall clearly in the crust-mantle mixed source field.The estimated pressure,derived from Al in amphibole barometry,is approximately 3 Kb.The granitoids are I-type,metaluminous and belong to the calc-alkaline series.They are all enriched in light rare earth elements and large ion lithophile elements,depleted in high field strength elements and display geochemical features typical of subduction-related calc-alkaline arc magmas.Most crystal size distribution(CSD)line patterns from the granitoids show a non-straight trend which points to the effect of physical processes during petrogenesis.The presence of numerous mafic enclaves,sieve texture and oscillatory zoning along with the CSD results show that magma mixing in the magma chamber had an important role in the petrogenesis of Tafresh granitoids.Moreover,the CSD analysis suggests that the plagioclase crystals were crystallized in a time span of less than 1000 years,which is indicative of shallow depth magma crystallization.

基于MAGMA的地铁电机端盖铸造工艺优化设计

在电机端盖的生产过程中,铸件的厚大部位存在铸造缺陷。为消除此缺陷,使用MAGMAsoft凝固模拟软件对初始工艺进行了分析和优化,解决了铸件的缩松问题,最终得到了合格的铸件。