We developed a novel absolute multi-pole encoder structure to improve the resolution of the multi-pole encoder, realize absolute output and reduce the manufacturing cost of the encoder. The structure includes two ring...We developed a novel absolute multi-pole encoder structure to improve the resolution of the multi-pole encoder, realize absolute output and reduce the manufacturing cost of the encoder. The structure includes two ring alnicos defined as index track and sub-division track, respectively. The index track is magnetized based on the improved gray code, with linear halls placed around the track evenly. The outputs of linear halls show the region the rotor belongs to. The sub-division track is magnetized to N-S-N-S (north-south-north-south), and the number of N-S pole pairs is determined by the index track. Three linear hall sensors with an air-gap of 2 mm are used to translate the magnetic filed to voltage signals. The relative offset in a single N-S is obtained through look-up. The magnetic encoder is calibrated using a higher-resolution incremental optical encoder. The pulse output from the optical encoder and hall signals from the magnetic encoder are sampled at the same time and transmitted to a computer, and the relation between them is calculated, and stored in the FLASH of MCU (micro controller unit) for look-up. In the working state, the absolute angle is derived by looking-up with hall signals. The structure is simple and the manufacturing cost is very low and suitable for mass production.展开更多
BACKGROUND Hepatic steatosis is a very common problem worldwide.AIM To assess the performance of two-and six-point Dixon magnetic resonance(MR)techniques in the detection,quantification and grading of hepatic steatosi...BACKGROUND Hepatic steatosis is a very common problem worldwide.AIM To assess the performance of two-and six-point Dixon magnetic resonance(MR)techniques in the detection,quantification and grading of hepatic steatosis.METHODS A single-center retrospective study was performed in 62 patients with suspected parenchymal liver disease.MR sequences included two-point Dixon,six-point Dixon,MR spectroscopy(MRS)and MR elastography.Fat fraction(FF)estimates on the Dixon techniques were compared to the MRS-proton density FF(PDFF).Statistical tests used included Pearson’s correlation and receiver operating characteristic.RESULTS FF estimates on the Dixon techniques showed excellent correlation(≥0.95)with MRS-PDFF,and excellent accuracy[area under the receiver operating characteristic(AUROC)≥0.95]in:(1)Detecting steatosis;and(2)Grading severe steatosis,(P<0.001).In iron overload,two-point Dixon was not evaluable due to confounding T2*effects.FF estimates on six-point Dixon vs MRS-PDFF showed a moderate correlation(0.82)in iron overload vs an excellent correlation(0.97)without iron overload,(P<0.03).The accuracy of six-point Dixon in grading mild steatosis improved(AUROC:0.59 to 0.99)when iron overload cases were excluded.The excellent correlation(>0.9)between the Dixon techniques vs MRSPDFF did not change in the presence of liver fibrosis(P<0.01).CONCLUSION Dixon techniques performed satisfactorily for the evaluation of hepatic steatosis but with exceptions.展开更多
Correlation between optimum of MR element slant angle and the ratio of magnetic pole length to magnetoresistance element length on linear magnetic encoder is explored in this paper.Optimum slant angle of MR element is...Correlation between optimum of MR element slant angle and the ratio of magnetic pole length to magnetoresistance element length on linear magnetic encoder is explored in this paper.Optimum slant angle of MR element is different and increases in proportion to the ratio of magnetic pole length to MR element length by slant multi-phase filtering model.展开更多
In this paper,the elastic wave band gap characteristics of two-dimensional hard-magnetic soft material phononic crystals(HmSM-PnCs)under the applied magnetic field are studied.Firstly,the relevant material parameters ...In this paper,the elastic wave band gap characteristics of two-dimensional hard-magnetic soft material phononic crystals(HmSM-PnCs)under the applied magnetic field are studied.Firstly,the relevant material parameters of hard-magnetic soft materials(HmSMs)are obtained by the experimental measurement.Then the finite element model of the programmable HmSM-PnCs is established to calculate its band structure under the applied magnetic field.The effects of some factors such as magnetic field,structure thickness,structure porosity,and magnetic anisotropy encoding mode on the band gap are given.The results show that the start and stop frequencies and band gap width can be tunable by changing the magnetic field.The magnetic anisotropy encoding mode has a remarkable effect on the number of band gaps and the critical magnetic field of band gaps.In addition,the effect of geometric size on PnC structure is also discussed.With the increase of the structure thickness,the start and stop frequencies of the band gap increase.展开更多
基金Funded partly by Heilongjiang Province Financial Fund for Researchers Returning from Abroad
文摘We developed a novel absolute multi-pole encoder structure to improve the resolution of the multi-pole encoder, realize absolute output and reduce the manufacturing cost of the encoder. The structure includes two ring alnicos defined as index track and sub-division track, respectively. The index track is magnetized based on the improved gray code, with linear halls placed around the track evenly. The outputs of linear halls show the region the rotor belongs to. The sub-division track is magnetized to N-S-N-S (north-south-north-south), and the number of N-S pole pairs is determined by the index track. Three linear hall sensors with an air-gap of 2 mm are used to translate the magnetic filed to voltage signals. The relative offset in a single N-S is obtained through look-up. The magnetic encoder is calibrated using a higher-resolution incremental optical encoder. The pulse output from the optical encoder and hall signals from the magnetic encoder are sampled at the same time and transmitted to a computer, and the relation between them is calculated, and stored in the FLASH of MCU (micro controller unit) for look-up. In the working state, the absolute angle is derived by looking-up with hall signals. The structure is simple and the manufacturing cost is very low and suitable for mass production.
文摘BACKGROUND Hepatic steatosis is a very common problem worldwide.AIM To assess the performance of two-and six-point Dixon magnetic resonance(MR)techniques in the detection,quantification and grading of hepatic steatosis.METHODS A single-center retrospective study was performed in 62 patients with suspected parenchymal liver disease.MR sequences included two-point Dixon,six-point Dixon,MR spectroscopy(MRS)and MR elastography.Fat fraction(FF)estimates on the Dixon techniques were compared to the MRS-proton density FF(PDFF).Statistical tests used included Pearson’s correlation and receiver operating characteristic.RESULTS FF estimates on the Dixon techniques showed excellent correlation(≥0.95)with MRS-PDFF,and excellent accuracy[area under the receiver operating characteristic(AUROC)≥0.95]in:(1)Detecting steatosis;and(2)Grading severe steatosis,(P<0.001).In iron overload,two-point Dixon was not evaluable due to confounding T2*effects.FF estimates on six-point Dixon vs MRS-PDFF showed a moderate correlation(0.82)in iron overload vs an excellent correlation(0.97)without iron overload,(P<0.03).The accuracy of six-point Dixon in grading mild steatosis improved(AUROC:0.59 to 0.99)when iron overload cases were excluded.The excellent correlation(>0.9)between the Dixon techniques vs MRSPDFF did not change in the presence of liver fibrosis(P<0.01).CONCLUSION Dixon techniques performed satisfactorily for the evaluation of hepatic steatosis but with exceptions.
文摘Correlation between optimum of MR element slant angle and the ratio of magnetic pole length to magnetoresistance element length on linear magnetic encoder is explored in this paper.Optimum slant angle of MR element is different and increases in proportion to the ratio of magnetic pole length to MR element length by slant multi-phase filtering model.
基金funded by the National Natural Science Foundation of China(11872143).
文摘In this paper,the elastic wave band gap characteristics of two-dimensional hard-magnetic soft material phononic crystals(HmSM-PnCs)under the applied magnetic field are studied.Firstly,the relevant material parameters of hard-magnetic soft materials(HmSMs)are obtained by the experimental measurement.Then the finite element model of the programmable HmSM-PnCs is established to calculate its band structure under the applied magnetic field.The effects of some factors such as magnetic field,structure thickness,structure porosity,and magnetic anisotropy encoding mode on the band gap are given.The results show that the start and stop frequencies and band gap width can be tunable by changing the magnetic field.The magnetic anisotropy encoding mode has a remarkable effect on the number of band gaps and the critical magnetic field of band gaps.In addition,the effect of geometric size on PnC structure is also discussed.With the increase of the structure thickness,the start and stop frequencies of the band gap increase.