INFLUENCE OF MAGNETIC FIELD ON ACCURACY OF ECM BY CHANGING THE CONDUCTIVITY OF ANODE FILM

The change of conductivity, thickness and scanning electron microscopy （SEM） appearance of the anode film of CrWMn in 10% NaNO3 at different anode potential either with or without the magnetic field applied are investigated by testing film resistance, galvanostatic transient and using SEM to design magnetic circuit in magnetic assisted electrochemical machining （MAECM）. The experiments show that the anode film has semi-conducting property. Compared with the situation without magnetic field applied, the resistance of the film formed at 1 .SV （anode potential） increased and decreased at 4.0V while B=0.4T and the magnetic north pole points toward anode. The SEM photo demonstrates that the magnetic field will densify the film in the passivation area and quicken dissolution of the anode metal in over-passivation area. Based on the influence of magnetic field on electrochemical machining（ECM） due to the changes of the anode film conductivity behavior, the magnetic north pole should be designed to point towards the workpiece surface that has been machined. Process experiments agree with the results of test analysis.

Experimental investigation for ultra-precision cutting of nickel based superalloy with the assistance of magnetic field

Nickel based superalloy is an important material because of its excellent properties under high temperatures.However,it is a difficult-to-machine material due to its low thermal conductivity,which can cause undesired localized high temperatures in the processing area.In this study,magnetic field-assisted end face turning experiments of nickel-based superalloy is carried out under the assistance of external magnetic fields of different strengths formed by permanent magnets.The experiment results show that,compared with ordinary machining,the chip morphology is improved,the oscillation of cutting force F_(c),F_(a),and Ffare significantly reduced by 90%,88%,and 78%,and the surface roughness Ra is improved from 23 to 13 nm,the P-V value of the fan-shaped area of the machined surface is reduced,and hardness and ductility are improved after the magnetic field is applied.The experiment results indicate that the application of a magnetic field is an efficient and convenient approach to improve the cutting performance of nickel based superalloy.

Magnetic field assisted fluidization—Dimensional analysis addressing the physical basis

This paper originates a discussion on dimensional analysis and scaling in magnetically assisted fluidized beds. Basic examination of process variables, merging mechanical and magnetic units, allows the conversion of mixed sets of variables into unified terms representing surface forces as effects of the fields contributing to the assisted fluidization behaviour. This transformation is termed ＂pressure transform＂ since the new variables are all characteristic pressures generated by three basic fields： gravity, magnetic and fluid flow. This approach addresses the physical basis in terms of dimensionless groups rather than formal algebraic manipulations pertinent to classical dimensional analysis. Basic dimensionless group termed granular magnetic Bond number is introduced as the ratio of characteristic pressures of gravity and of magnetic field. This analysis also provides a set of named dimensionless numbers characterizing magnetic field assisted fluidization such as Filippov number, Rosensweig number, Kwauk number and Siegell number, derived as ratios of characteristic pressures.