A robust torsional vibration suppression strategy is proposed for the main drive system of the rolling mill subject to uncertainties,disturbances and input saturation.With given model information incorporated into obs...A robust torsional vibration suppression strategy is proposed for the main drive system of the rolling mill subject to uncertainties,disturbances and input saturation.With given model information incorporated into observer design,an extended state observer that relies only on roller speed measurements is developed to estimate the system states and lumped uncertainties of the rolling mill main drive system.To handle the motor torque saturation,an auxiliary signal system with the same order as the plant is constructed.The error between the control input and plant input is taken as the input of the constructed auxiliary system,and a number of signals are generated to compensate for the effect of the motor torque saturation.Furthermore,a robust output feedback controller is introduced to obtain better transient and steady-state performance of the rolling mill main drive system and the stability of the closed-loop system is strictly proved via Lyapunov theory.Finally,comparative simulations are performed to verify the effectiveness and superiority of the proposed control strategy.展开更多
The jointed shaft in the drivelines of the rolling mill, with its angle continuously varying in the production, has obvious impact on the stability of the main drive system. Considering the effect caused by the joint ...The jointed shaft in the drivelines of the rolling mill, with its angle continuously varying in the production, has obvious impact on the stability of the main drive system. Considering the effect caused by the joint angle and friction force of roller gap, the nonlinear vibration model of the main drive system which contains parametric excitation stiffness and nonlinear friction damping was established. The amplitude-frequency characteristic equation and bifurcation response equation were obtained by using the method of multiple scales. Depending on the bifurcation response equation, the transition set and the topology structure of bifurcation curve of the system were obtained by using the singularity theory. The transition set can separate the system into seven areas, which has different bifurcation forms respectively. By taking the 1 780 rolling mill of Chengde Steel Co for example, the simulation and analysis were performed. The amplitude-frequency curves under different joint angles, damping coefficients, and nonlinear stiffness were given. The variations of these parameters have strong influences on the stability of electromechanical resonances and the characteristic of the response curves. The best angle of the jointed shaft is 4.761 3° in this rolling mill.展开更多
The servomotor drive turret punch press is attracting more attentions and being developed more intensively due to the advantages of high speed,high accuracy,high flexibility,high productivity,low noise,cleaning and en...The servomotor drive turret punch press is attracting more attentions and being developed more intensively due to the advantages of high speed,high accuracy,high flexibility,high productivity,low noise,cleaning and energy saving.To effectively improve the performance and lower the cost,it is necessary to develop new mechanisms and establish corresponding optimal design method with uniform performance indices.A new patented main driving mechanism and a new optimal design method are proposed.In the optimal design,the performance indices,i.e.,the local motion/force transmission indices ITI,OTI,good transmission workspace good transmission workspace(GTW) and the global transmission indices GTIs are defined.The non-dimensional normalization method is used to get all feasible solutions in dimensional synthesis.Thereafter,the performance atlases,which can present all possible design solutions,are depicted.As a result,the feasible solution of the mechanism with good motion/force transmission performance is obtained.And the solution can be flexibly adjusted by designer according to the practical design requirements.The proposed mechanism is original,and the presented design method provides a feasible solution to the optimal design of the main driving mechanism for servo punch press.展开更多
Recently,the China E-Business Research Center(100EC.CN)released the'2015 Monitoring Report of China E-business Market'.The report says that the China E-business transaction volume amounted to 18.3 trillion yua...Recently,the China E-Business Research Center(100EC.CN)released the'2015 Monitoring Report of China E-business Market'.The report says that the China E-business transaction volume amounted to 18.3 trillion yuan in 2015,up by 36.5%from a year ago,and marking an increase of 5.1 percentage points in growth rate.Meanwhile,the B2B E-business trade value totaled 13.9 trillion yuan,up展开更多
Some concrete methods are suggested in the article to control noises in main driving system of XK-736-type NC miller by analyzing working conditions of gears in the main driving system and bearings in the spindle gear...Some concrete methods are suggested in the article to control noises in main driving system of XK-736-type NC miller by analyzing working conditions of gears in the main driving system and bearings in the spindle gearshift system. Without changing the original design, noises are reduced ideally by modifying gear top, and by controlling the profile error ; the central distance of meshing gear, the quality of the inner and outer rings of bearings ; and the fit accuracy among bearing, hole and axis. The results may provide a reference for diagnosing and maintaining in future use.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.U20A20187 and 61933009)the Top talents of Hebei provincial Education Department(Grant No.BJ2019047).
文摘A robust torsional vibration suppression strategy is proposed for the main drive system of the rolling mill subject to uncertainties,disturbances and input saturation.With given model information incorporated into observer design,an extended state observer that relies only on roller speed measurements is developed to estimate the system states and lumped uncertainties of the rolling mill main drive system.To handle the motor torque saturation,an auxiliary signal system with the same order as the plant is constructed.The error between the control input and plant input is taken as the input of the constructed auxiliary system,and a number of signals are generated to compensate for the effect of the motor torque saturation.Furthermore,a robust output feedback controller is introduced to obtain better transient and steady-state performance of the rolling mill main drive system and the stability of the closed-loop system is strictly proved via Lyapunov theory.Finally,comparative simulations are performed to verify the effectiveness and superiority of the proposed control strategy.
基金Item Sponsored by National Natural Science Foundation of China(51005196)Natural Science Foundation of Hebei Province of China(F2010001317,E2012203194)
文摘The jointed shaft in the drivelines of the rolling mill, with its angle continuously varying in the production, has obvious impact on the stability of the main drive system. Considering the effect caused by the joint angle and friction force of roller gap, the nonlinear vibration model of the main drive system which contains parametric excitation stiffness and nonlinear friction damping was established. The amplitude-frequency characteristic equation and bifurcation response equation were obtained by using the method of multiple scales. Depending on the bifurcation response equation, the transition set and the topology structure of bifurcation curve of the system were obtained by using the singularity theory. The transition set can separate the system into seven areas, which has different bifurcation forms respectively. By taking the 1 780 rolling mill of Chengde Steel Co for example, the simulation and analysis were performed. The amplitude-frequency curves under different joint angles, damping coefficients, and nonlinear stiffness were given. The variations of these parameters have strong influences on the stability of electromechanical resonances and the characteristic of the response curves. The best angle of the jointed shaft is 4.761 3° in this rolling mill.
基金supported by National Natural Science Foundation of China(Grant No.51021064)National Key Scientific and Technological Program of China(Grant No.2010ZX04004-116)
文摘The servomotor drive turret punch press is attracting more attentions and being developed more intensively due to the advantages of high speed,high accuracy,high flexibility,high productivity,low noise,cleaning and energy saving.To effectively improve the performance and lower the cost,it is necessary to develop new mechanisms and establish corresponding optimal design method with uniform performance indices.A new patented main driving mechanism and a new optimal design method are proposed.In the optimal design,the performance indices,i.e.,the local motion/force transmission indices ITI,OTI,good transmission workspace good transmission workspace(GTW) and the global transmission indices GTIs are defined.The non-dimensional normalization method is used to get all feasible solutions in dimensional synthesis.Thereafter,the performance atlases,which can present all possible design solutions,are depicted.As a result,the feasible solution of the mechanism with good motion/force transmission performance is obtained.And the solution can be flexibly adjusted by designer according to the practical design requirements.The proposed mechanism is original,and the presented design method provides a feasible solution to the optimal design of the main driving mechanism for servo punch press.
文摘Recently,the China E-Business Research Center(100EC.CN)released the'2015 Monitoring Report of China E-business Market'.The report says that the China E-business transaction volume amounted to 18.3 trillion yuan in 2015,up by 36.5%from a year ago,and marking an increase of 5.1 percentage points in growth rate.Meanwhile,the B2B E-business trade value totaled 13.9 trillion yuan,up
基金supported by the University Research Projects of the Education Department of Zhejiang Province in 2011 under Grant No.Y20111926
文摘Some concrete methods are suggested in the article to control noises in main driving system of XK-736-type NC miller by analyzing working conditions of gears in the main driving system and bearings in the spindle gearshift system. Without changing the original design, noises are reduced ideally by modifying gear top, and by controlling the profile error ; the central distance of meshing gear, the quality of the inner and outer rings of bearings ; and the fit accuracy among bearing, hole and axis. The results may provide a reference for diagnosing and maintaining in future use.
