Analysis and Control over Noises in Main Driving System of XK-736-type NC Miller

Some concrete methods are suggested in the article to control noises in main driving system of XK-736-type NC miller by analyzing working conditions of gears in the main driving system and bearings in the spindle gearshift system. Without changing the original design, noises are reduced ideally by modifying gear top, and by controlling the profile error ; the central distance of meshing gear, the quality of the inner and outer rings of bearings ; and the fit accuracy among bearing, hole and axis. The results may provide a reference for diagnosing and maintaining in future use.

Optimal Design of a Main Driving Mechanism for Servo Punch Press Based on Performance Atlases

The servomotor drive turret punch press is attracting more attentions and being developed more intensively due to the advantages of high speed,high accuracy,high flexibility,high productivity,low noise,cleaning and energy saving.To effectively improve the performance and lower the cost,it is necessary to develop new mechanisms and establish corresponding optimal design method with uniform performance indices.A new patented main driving mechanism and a new optimal design method are proposed.In the optimal design,the performance indices,i.e.,the local motion/force transmission indices ITI,OTI,good transmission workspace good transmission workspace(GTW) and the global transmission indices GTIs are defined.The non-dimensional normalization method is used to get all feasible solutions in dimensional synthesis.Thereafter,the performance atlases,which can present all possible design solutions,are depicted.As a result,the feasible solution of the mechanism with good motion/force transmission performance is obtained.And the solution can be flexibly adjusted by designer according to the practical design requirements.The proposed mechanism is original,and the presented design method provides a feasible solution to the optimal design of the main driving mechanism for servo punch press.

Tier Ⅲ and Ⅳ cities Will Be the Main Driving Forces for Future E-business

Recently,the China E-Business Research Center(100EC.CN)released the'2015 Monitoring Report of China E-business Market'.The report says that the China E-business transaction volume amounted to 18.3 trillion yuan in 2015,up by 36.5%from a year ago,and marking an increase of 5.1 percentage points in growth rate.Meanwhile,the B2B E-business trade value totaled 13.9 trillion yuan,up

The main force driving forwards Chinese luxury market

It was during the weekend that Miss Wu lover a shop selling the luxury brand Louis VThrough the window, she could indulged in the filled with all kinds of handbags, dustcoats anheels-all she yearned for. But she tarried on thand found herself embarrassed to enter.

Nonlinear Dynamics of Torsional Vibration for Rolling Mill′s Main Drive System Under Parametric Excitation

The jointed shaft in the drivelines of the rolling mill, with its angle continuously varying in the production, has obvious impact on the stability of the main drive system. Considering the effect caused by the joint angle and friction force of roller gap, the nonlinear vibration model of the main drive system which contains parametric excitation stiffness and nonlinear friction damping was established. The amplitude-frequency characteristic equation and bifurcation response equation were obtained by using the method of multiple scales. Depending on the bifurcation response equation, the transition set and the topology structure of bifurcation curve of the system were obtained by using the singularity theory. The transition set can separate the system into seven areas, which has different bifurcation forms respectively. By taking the 1 780 rolling mill of Chengde Steel Co for example, the simulation and analysis were performed. The amplitude-frequency curves under different joint angles, damping coefficients, and nonlinear stiffness were given. The variations of these parameters have strong influences on the stability of electromechanical resonances and the characteristic of the response curves. The best angle of the jointed shaft is 4.761 3° in this rolling mill.

Extended-state-observer-based robust torsional vibration suppression for rolling mill main drive system with input saturation

A robust torsional vibration suppression strategy is proposed for the main drive system of the rolling mill subject to uncertainties,disturbances and input saturation.With given model information incorporated into observer design,an extended state observer that relies only on roller speed measurements is developed to estimate the system states and lumped uncertainties of the rolling mill main drive system.To handle the motor torque saturation,an auxiliary signal system with the same order as the plant is constructed.The error between the control input and plant input is taken as the input of the constructed auxiliary system,and a number of signals are generated to compensate for the effect of the motor torque saturation.Furthermore,a robust output feedback controller is introduced to obtain better transient and steady-state performance of the rolling mill main drive system and the stability of the closed-loop system is strictly proved via Lyapunov theory.Finally,comparative simulations are performed to verify the effectiveness and superiority of the proposed control strategy.

Relationship of atmospheric boundary layer depth with thermodynamic processes at the land surface in arid regions of China

The atmospheric boundary layer （ABL） is an important physical characteristic of the Earth＇s atmosphere. Compared with the typical ABL, the ABL in arid regions has distinct features and is formed by particular mechanisms. In this paper, the depth of the diurnal and nocturnal ABLs and their related thermodynamic features of land surface processes, including net radiation, the ground-air temperature difference and sensible heat flux, under typical summer and winter conditions are discussed on the basis of comprehensive observations of the ABL and thermodynamic processes at the land surface carried out in the extreme arid zone of Dunhuang. The relationships of the ABL depth in the development and maintenance stages with these thermodynamic features are also investigated. The results show that the depth of the ABL is closely correlated with the thermodynamic features in both development and maintenance stages and more energy is consumed in the development stage. Further analysis indicates that wind velocity also affects ABL development, especially the development of a stable boundary layer in winter. Taken together, the analysis results indicate that extremely strong thermodynamic processes at the land surface are the main driving factor for the formation of a deep ABL in an arid region.

Adaptive command filter constraint control of rolling mill torsional vibration under current harmonic

An adaptive command filter control strategy was proposed to realize the asymptotic tracking of the roll speed,which successfully suppressed torsional vibration for the main drive system of the rolling mill with nonlinear friction,nonlinear damping,current harmonic,time-varying stiffness and unknown disturbance.A finite time predetermined performance method was proposed,so that the speed tracking error of the main transmission system was always constrained in the performance function and converged to its minimum boundary within the specified time.Based on the adaptive estimation of harmonic amplitude,the torque control law of the motor was obtained by using the filter backstepping method,which prevented the torsional vibration of the system caused by the input fluctuation and avoided the complexity explosion of the controller design,and the stability of the closed-loop system was strictly proved by the Lyapunov theory.The actual numerical simulation verified the effectiveness of the proposed control strategy.