Coal gangue is the most used filling material during reclamation of areas suffering subsidence from min- ing. Main trace element levels (F, As, Hg, and Pb) in shallow groundwater in the reclamation area may be affecte...Coal gangue is the most used filling material during reclamation of areas suffering subsidence from min- ing. Main trace element levels (F, As, Hg, and Pb) in shallow groundwater in the reclamation area may be affected by leaching from the gangue. This can has an impact on the application of the water for agricul- tural irrigation or use as drinking water. Therefore, it is of great significance to understand the effect coal gangue has on the shallow groundwater of a reclaimed area. We studied the effect of coal gangue on fluo- rine, arsenic, mercury, and lead levels in the shallow groundwater of a reclamation area by testing the water and the coal gangue. One well near the reclamation area was used as a control well and element levels in water from this well and from the soil next to the well were also measured. The results show that the levels of these elements are increasing in the reclamation area over time. The increase in fluorine, arsenic, mercury, and lead in monitor wells varies from 7.42% to 8.26%, from 7.13% to 7.90%, from 4.85% to 6.48%, and from 4.69% to 6.42%, respectively. Fluorine and arsenic levels are lower in monitor wells than in the control water. The other elements are found in greater concentration than in the control. The Nemerow index also indicates that the shallow groundwater in the reclamation area I is moderately affected by the back-filling coal gangue, while the shallow groundwater in the reclamation area II and III are slightly affected by the back-filling coal gangue. This shallow groundwater could be used for agri- cultural irrigation or for drinking.展开更多
In this paper, progress in strain study of blocks and faults by GPS data are discussed, and the concept that active structures between blocks are the main body of crustal strain is clarified. By energy transfer princi...In this paper, progress in strain study of blocks and faults by GPS data are discussed, and the concept that active structures between blocks are the main body of crustal strain is clarified. By energy transfer principle of elastic mechanics, the relation between strain around faults and tectonic force on fault surfaces is set up and main body element model of crustal strain is constructed. Finally, the relation between mechanical evolution of model and seismogenic process of Kunlun earthquake (Ms=8.1) is discussed by continuous GPS data of datum stations. The result suggests that the relatively relaxed change under background of strong compressing and shearing may help to trigger moderate-strong earthquakes.展开更多
In this paper we firstly select main factors relating to urbanization level of Xiantao District in Hubei Province by main element, then, make model of urbanization level by analysis of multiple liner regression, and l...In this paper we firstly select main factors relating to urbanization level of Xiantao District in Hubei Province by main element, then, make model of urbanization level by analysis of multiple liner regression, and lastly predict its urbanization level展开更多
The Luxi-Xianrenzhang diabase dikes were emplaced into the eastern part of the Guidong composite granitoids in northern Guangdong Province at the end of the Early Cretaceous. They show tholeiitic features, enrichment ...The Luxi-Xianrenzhang diabase dikes were emplaced into the eastern part of the Guidong composite granitoids in northern Guangdong Province at the end of the Early Cretaceous. They show tholeiitic features, enrichment in large ion lithophile elements, slight enrichment in light rare earth elements, depletion in Zr and Hf, and basically no depletion in Nb and Ta and no Eu anomaly. They are similar to intraplate basalt in terms of trace element characteristics. They have high εNd(t) values (3.6-4.9), initial ^87Sr/^86Sr ratios (0.70530-70641) and δ^18O values and Dupal anomaly of Pb isotope compositions. Their Sr-Nd, Pb-Sr, Pb-Nd and Pb-Pb isotopes plot between DMM and EMII, with Pb similar to EMII, Nd relatively close to DMM and Sr in between. This profile suggests that the diabase dikes studied were derived from partial melting of a mantle source that had been subjected to metasomatism by fluids originated from a subduction zone under a tectonic environment of crustal extension and lithosphere thinning in the late Yanshanian.展开更多
Two isomers of a sandwich-type anion [Ge_(9)-In-Ge_(9)]^(5–) were synthesized by controlling the chelating agents (2,2,2-crypt/18-C-6). Further reactions with early/late transition metal complexes, Mo(CO)_(6) and Ni(...Two isomers of a sandwich-type anion [Ge_(9)-In-Ge_(9)]^(5–) were synthesized by controlling the chelating agents (2,2,2-crypt/18-C-6). Further reactions with early/late transition metal complexes, Mo(CO)_(6) and Ni(COD)_(2), respectively, yielded two new types of inorganic sandwich derivatives: a half-sandwich cluster [Ge_(9)-In-Mo(CO)_(5)]^(3–) with a low-valence In(I) center and an unsymmetrical sandwich-type cluster {[(Ni@Ge_(9))In(Ni_(0.648)@Ge_(9))]}^(5–) due to the insertion of Ni atoms, respectively. The isolation of these new derivatives demonstrates the reactivity of sandwich-type [Ge_(9)-In-Ge_(9)]^(5–) acting as the precursor, which provides some enlightenment for constructing new inorganic sandwich compounds.展开更多
Electrical contact materials are generally Ag-or Cu-based composites and play a critical role in ensuring the reliability and efficiency of electrical equipments and electronic instruments.The MAX(M is an early transi...Electrical contact materials are generally Ag-or Cu-based composites and play a critical role in ensuring the reliability and efficiency of electrical equipments and electronic instruments.The MAX(M is an early transition metal,A is an element from III or IV main groups,and X is carbon or/and nitrogen)phase ceramics display a unique combination of properties and may serve as an ideal reinforcement phase for electrical contact materials.The biological materials evolved in nature generally exhibit three-dimensional(3D)interpenetrating-phase architectures,which may offer useful inspiration for the architectural design of electrical contact materials.Here,a series of bi-continuous Ag-Ti_(3)SiC_(2) MAX phase composites with high ceramic contents exceeding 50 vol.%and having micron-and ultrafine-scaled 3D interpenetrating-phase architectures,wherein both constituents were continuous and mutually interspersed,were exploited by pressureless infiltration of Ag melt into partially sintered Ti_(3)SiC_(2) scaffolds.The mechanical and electrical properties as well as the friction and wear performance of the composites were investigated and revealed to be closely dependent on the ceramic contents and characteristic structural dimensions.The composites exhibited a good combination of properties with high hardness over 2.3 GPa,high flexural strength exceeding 530 MPa,decent fracture toughness over 10 MPa·m^(1/2),and good wear resistance with low wear rate at an order of 10^(-5)mm^(3)/(N·m),which were much superior compared to the counterparts made by powder metallurgy methods.In particular,the hardness,electrical conductivity,strength,and fracture toughness of the composites demonstrated a simultaneous improvement as the structure was refined from micron-to ultrafine-scales at equivalent ceramic contents.The good combination of properties along with the facile processing route makes the Ag-Ti_(3)SiC_(2)3D interpenetrating-phase composites appealing for electrical contact applications.展开更多
Both dipyrromethene complexes and radicals of heavier main group elements have been of high interest.However,cationic germanium radicals and dipyrromethene-based radicals of heavier main group elements are still escap...Both dipyrromethene complexes and radicals of heavier main group elements have been of high interest.However,cationic germanium radicals and dipyrromethene-based radicals of heavier main group elements are still escaped to be isolated.Herein,we report the isolation and full characterization of a neutral Ge(I)-masked dipyrromethene-based radical 3 and the first cationic Ge(III)-centered radical 5^(·+)as stable crystalline solids.3 behaves as a germanium(I)radical in its reaction with diphenyl disulfide to form the Ge-S bond,although X-ray crystallographic,EPR spectroscopic,computational studies revealed that the unpaired electron of 3 is mainly delocalized over the C_(9)N_(2)Ge backbone and the allylic radical character is also significant in 3.In contrast to 3,the spin density of 5^(·+)is mainly localized at the Ge center with minor contribution from the dipyrromethene ligand.Moreover,reduction of 5^(·+)with potassium graphite quantitatively regenerates 5,illustrating a reversible one-electron redox pair.展开更多
Theσ-bond activation by main group element has received enormous attention from theoretical and experimental chemists.Here,the reaction of C-X(X=Cl,Br,I)bonds in benzyl and allyl halides with a pincer-type phosphorus...Theσ-bond activation by main group element has received enormous attention from theoretical and experimental chemists.Here,the reaction of C-X(X=Cl,Br,I)bonds in benzyl and allyl halides with a pincer-type phosphorus(Ⅲ)species was reported.A series of structurally robust phosphorus(Ⅴ)compounds were formed via the formal oxidative addition reactions of C-X bonds to the phosphorus(Ⅲ)center.Density functional theory calculations show that the nucleophilic addition process is more favorable than the direct oxidative addition mechanism.Isomerization of bent structures of phosphorus(Ⅲ)compound to poorly nucleophilic compounds to undergo further C-X bond activation can be rationalized by frontier molecule orbital analysis.This study not only provides a deep understanding of the reactivity of phosphorus(Ⅲ)species but also demonstrates a potential of main group elements for the small-molecule activation.展开更多
基金The project was funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Coal gangue is the most used filling material during reclamation of areas suffering subsidence from min- ing. Main trace element levels (F, As, Hg, and Pb) in shallow groundwater in the reclamation area may be affected by leaching from the gangue. This can has an impact on the application of the water for agricul- tural irrigation or use as drinking water. Therefore, it is of great significance to understand the effect coal gangue has on the shallow groundwater of a reclaimed area. We studied the effect of coal gangue on fluo- rine, arsenic, mercury, and lead levels in the shallow groundwater of a reclamation area by testing the water and the coal gangue. One well near the reclamation area was used as a control well and element levels in water from this well and from the soil next to the well were also measured. The results show that the levels of these elements are increasing in the reclamation area over time. The increase in fluorine, arsenic, mercury, and lead in monitor wells varies from 7.42% to 8.26%, from 7.13% to 7.90%, from 4.85% to 6.48%, and from 4.69% to 6.42%, respectively. Fluorine and arsenic levels are lower in monitor wells than in the control water. The other elements are found in greater concentration than in the control. The Nemerow index also indicates that the shallow groundwater in the reclamation area I is moderately affected by the back-filling coal gangue, while the shallow groundwater in the reclamation area II and III are slightly affected by the back-filling coal gangue. This shallow groundwater could be used for agri- cultural irrigation or for drinking.
基金National Natural Science Foundation of China (40274023) and National Program for Key Science & Technology Projects (2004BA601B01-02-01).
文摘In this paper, progress in strain study of blocks and faults by GPS data are discussed, and the concept that active structures between blocks are the main body of crustal strain is clarified. By energy transfer principle of elastic mechanics, the relation between strain around faults and tectonic force on fault surfaces is set up and main body element model of crustal strain is constructed. Finally, the relation between mechanical evolution of model and seismogenic process of Kunlun earthquake (Ms=8.1) is discussed by continuous GPS data of datum stations. The result suggests that the relatively relaxed change under background of strong compressing and shearing may help to trigger moderate-strong earthquakes.
文摘In this paper we firstly select main factors relating to urbanization level of Xiantao District in Hubei Province by main element, then, make model of urbanization level by analysis of multiple liner regression, and lastly predict its urbanization level
基金This study was supported by National Natural Science Foundation of China(grants 4022 1301 and 40132010).
文摘The Luxi-Xianrenzhang diabase dikes were emplaced into the eastern part of the Guidong composite granitoids in northern Guangdong Province at the end of the Early Cretaceous. They show tholeiitic features, enrichment in large ion lithophile elements, slight enrichment in light rare earth elements, depletion in Zr and Hf, and basically no depletion in Nb and Ta and no Eu anomaly. They are similar to intraplate basalt in terms of trace element characteristics. They have high εNd(t) values (3.6-4.9), initial ^87Sr/^86Sr ratios (0.70530-70641) and δ^18O values and Dupal anomaly of Pb isotope compositions. Their Sr-Nd, Pb-Sr, Pb-Nd and Pb-Pb isotopes plot between DMM and EMII, with Pb similar to EMII, Nd relatively close to DMM and Sr in between. This profile suggests that the diabase dikes studied were derived from partial melting of a mantle source that had been subjected to metasomatism by fluids originated from a subduction zone under a tectonic environment of crustal extension and lithosphere thinning in the late Yanshanian.
基金supported by the National Natural Science Foundation of China(Nos.92161102 and 21971118)the Nat-ural Science Foundation of Tianjin City(Nos.21JCZXJC00140 and 20JCYBJC01560)as well as the 111 project(B18030)from Ministry of Education China to Z.M.S.and the Tianjin Research Innovation Project for Postgraduate Students(2020YJSB150)the Ph.D.Can-didate Research Innovation Fund of NKU School of Materials Sci-ence and Engineering to H.-L.X.
文摘Two isomers of a sandwich-type anion [Ge_(9)-In-Ge_(9)]^(5–) were synthesized by controlling the chelating agents (2,2,2-crypt/18-C-6). Further reactions with early/late transition metal complexes, Mo(CO)_(6) and Ni(COD)_(2), respectively, yielded two new types of inorganic sandwich derivatives: a half-sandwich cluster [Ge_(9)-In-Mo(CO)_(5)]^(3–) with a low-valence In(I) center and an unsymmetrical sandwich-type cluster {[(Ni@Ge_(9))In(Ni_(0.648)@Ge_(9))]}^(5–) due to the insertion of Ni atoms, respectively. The isolation of these new derivatives demonstrates the reactivity of sandwich-type [Ge_(9)-In-Ge_(9)]^(5–) acting as the precursor, which provides some enlightenment for constructing new inorganic sandwich compounds.
基金supports from the National Key R&D Program of China(No.2020YFA0710404)the National Natural Science Foundation of China(No.52173269),the KC Wong Education Foundation(No.GJTD-2020-09)the Liaoning Revitalization Talents Program,and the Youth Innovation Promotion Association CAS(No.2019191).
文摘Electrical contact materials are generally Ag-or Cu-based composites and play a critical role in ensuring the reliability and efficiency of electrical equipments and electronic instruments.The MAX(M is an early transition metal,A is an element from III or IV main groups,and X is carbon or/and nitrogen)phase ceramics display a unique combination of properties and may serve as an ideal reinforcement phase for electrical contact materials.The biological materials evolved in nature generally exhibit three-dimensional(3D)interpenetrating-phase architectures,which may offer useful inspiration for the architectural design of electrical contact materials.Here,a series of bi-continuous Ag-Ti_(3)SiC_(2) MAX phase composites with high ceramic contents exceeding 50 vol.%and having micron-and ultrafine-scaled 3D interpenetrating-phase architectures,wherein both constituents were continuous and mutually interspersed,were exploited by pressureless infiltration of Ag melt into partially sintered Ti_(3)SiC_(2) scaffolds.The mechanical and electrical properties as well as the friction and wear performance of the composites were investigated and revealed to be closely dependent on the ceramic contents and characteristic structural dimensions.The composites exhibited a good combination of properties with high hardness over 2.3 GPa,high flexural strength exceeding 530 MPa,decent fracture toughness over 10 MPa·m^(1/2),and good wear resistance with low wear rate at an order of 10^(-5)mm^(3)/(N·m),which were much superior compared to the counterparts made by powder metallurgy methods.In particular,the hardness,electrical conductivity,strength,and fracture toughness of the composites demonstrated a simultaneous improvement as the structure was refined from micron-to ultrafine-scales at equivalent ceramic contents.The good combination of properties along with the facile processing route makes the Ag-Ti_(3)SiC_(2)3D interpenetrating-phase composites appealing for electrical contact applications.
基金support from the National Natural Science Foundation of China(Grant 22001184,Y.S.,11904425,C.L.)the Natural Science Foundation of Jiangsu Province(Grant BK20200849,Y.S.)+1 种基金the Natural Science Foundation of Jiangsu Higher Education Institutions of China(Grant 20KJB150002,Y.S.)the Entrepreneurship and Innovation Talent Program of Jiangsu Province(Y.S.,JSSCBS20210664,C.L.).
文摘Both dipyrromethene complexes and radicals of heavier main group elements have been of high interest.However,cationic germanium radicals and dipyrromethene-based radicals of heavier main group elements are still escaped to be isolated.Herein,we report the isolation and full characterization of a neutral Ge(I)-masked dipyrromethene-based radical 3 and the first cationic Ge(III)-centered radical 5^(·+)as stable crystalline solids.3 behaves as a germanium(I)radical in its reaction with diphenyl disulfide to form the Ge-S bond,although X-ray crystallographic,EPR spectroscopic,computational studies revealed that the unpaired electron of 3 is mainly delocalized over the C_(9)N_(2)Ge backbone and the allylic radical character is also significant in 3.In contrast to 3,the spin density of 5^(·+)is mainly localized at the Ge center with minor contribution from the dipyrromethene ligand.Moreover,reduction of 5^(·+)with potassium graphite quantitatively regenerates 5,illustrating a reversible one-electron redox pair.
基金supported by the National Natural Science Foundation of China(Nos.21772088 and 21573179)the Natural Science Foundation of Jiangsu Province(No.BK20170635)the Young Elite Scientist Sponsorship Program of China Association of Science and Technology,the program of Jiangsu SpeciallyAppointed Professor and Shuangchuang Talent Plan of Jiangsu Province。
文摘Theσ-bond activation by main group element has received enormous attention from theoretical and experimental chemists.Here,the reaction of C-X(X=Cl,Br,I)bonds in benzyl and allyl halides with a pincer-type phosphorus(Ⅲ)species was reported.A series of structurally robust phosphorus(Ⅴ)compounds were formed via the formal oxidative addition reactions of C-X bonds to the phosphorus(Ⅲ)center.Density functional theory calculations show that the nucleophilic addition process is more favorable than the direct oxidative addition mechanism.Isomerization of bent structures of phosphorus(Ⅲ)compound to poorly nucleophilic compounds to undergo further C-X bond activation can be rationalized by frontier molecule orbital analysis.This study not only provides a deep understanding of the reactivity of phosphorus(Ⅲ)species but also demonstrates a potential of main group elements for the small-molecule activation.