A comparative study of the main factors controlling geohazards induced by 10 strong earthquakes in Western China since the Wenchuan earthquake in 2008

Determining the main controlling factors of earthquake-triggered geohazards is a prerequisite for studying earthquake geohazards and post-disaster emergency response.By studying these factors,the geomorphic and geological factors controlling the nature,condition,and distribution of earthquake-induced geohazards can be analyzed.Such insights facilitate earthquake disaster prediction and emergency response planning.The authors combined field investigations and spatial data analysis to examine geohazards induced by seismic events,examining ten earthquakes including the Wenchuan,Yushu,Lushan events,to elucidate the main control factors of seismic geohazard.The authors observed that seismic geohazard occurrence is usually affected by many factors,among which active nature of the seismogenic fault,seismic peak ground acceleration(PGA),topographic slope and geomorphic height differences,and distance from the fault zone and river system are the most important.Compared with strike-slip earthquakes,thrust earthquakes induce more high-altitude and high-speed remote landslides,which can cause great harm.Slopes of 0°–40°are prone to secondary seismic geohazards,which are mainly concentrated 0–6 km from the river system.Secondary geohazards are not only related to seismogenic fault but also influenced by the associated faults in the earthquake area.The maximum seismic PGA and secondary seismic geohazard number are positively correlated,and the horizontal and vertical ground motions play leading and promoting roles in secondary geohazard formation,respectively.Through the research,the spatial distribution of seismic geohazards is predicted,providing a basis for the formulation of emergency response plans following disasters.

Enrichment model and major controlling factors of below-source tight oil in Lower Cretaceous Fuyu reservoirs in northern Songliao Basin,NE China

Based on the geochemical,seismic,logging and drilling data,the Fuyu reservoirs of the Lower Cretaceous Quantou Formation in northern Songliao Basin are systematically studied in terms of the geological characteristics,the tight oil enrichment model and its major controlling factors.First,the Quantou Formation is overlaid by high-quality source rocks of the Upper Cretaceous Qingshankou Formation,with the development of nose structure around sag and the broad and continuous distribution of sand bodies.The reservoirs are tight on the whole.Second,the configuration of multiple elements,such as high-quality source rocks,reservoir rocks,fault,overpressure and structure,controls the tight oil enrichment in the Fuyu reservoirs.The source-reservoir combination controls the tight oil distribution pattern.The pressure difference between source and reservoir drives the charging of tight oil.The fault-sandbody transport system determines the migration and accumulation of oil and gas.The positive structure is the favorable place for tight oil enrichment,and the fault-horst zone is the key part of syncline area for tight oil exploration.Third,based on the source-reservoir relationship,transport mode,accumulation dynamics and other elements,three tight oil enrichment models are recognized in the Fuyu reservoirs:(1)vertical or lateral migration of hydrocarbon from source rocks to adjacent reservoir rocks,that is,driven by overpressure,hydrocarbon generated is migrated vertically or laterally to and accumulates in the adjacent reservoir rocks;(2)transport of hydrocarbon through faults between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downward through faults to the sandbodies that are separated from the source rocks;and(3)migration of hydrocarbon through faults and sandbodies between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downwards through faults to the reservoir rocks that are separated from the source rocks,and then migrates laterally through sandbodies.Fourth,the differences in oil source conditions,charging drive,fault distribution,sandbody and reservoir physical properties cause the differential enrichment of tight oil in the Fuyu reservoirs.Comprehensive analysis suggests that the Fuyu reservoir in the Qijia-Gulong Sag has good conditions for tight oil enrichment and has been less explored,and it is an important new zone for tight oil exploration in the future.

Differential Hydrocarbon Enrichment and its Main Controlling Factors in Depressions of the Bohai Bay Basin Differential Hydrocarbon Enrichment and its Main Controlling Factors in Depressions of the Bohai Bay Basin

Significant differential hydrocarbon enrichment occurs in depressions in a petroliferous basin.There are multiple depressions in the Bohai Bay Basin, and each depression as a relatively independent unit of hydrocarbon generation, migration and accumulation, contains significantly different hydrocarbon generation conditions and enrichment degree. On the basis of previous documents and a large number of statistical data, this work comparatively analyzed the differential hydrocarbon enrichment and its major controlling factors in depressions of the Bohai Bay Basin. The results show that depressions in the Bohai Bay Basin have various hydrocarbon enrichment degrees, and can be categorized into four types, namely enormously oil-rich, oil-rich, oily and oil-poor depressions. In general, the enormously oil-rich and oil-rich depressions are distributed in the eastern part of the basin along the Tan-Lu and Lan-Liao faults, whereas depressions in the western part of the basin are poor in hydrocarbons. Moreover, the vertical distribution of hydrocarbons is also highly heterogeneous, with Pre-Paleogene strata rich in hydrocarbons in the northern and western depressions, Paleogene strata rich in hydrocarbons in the entire basin, and Neogene strata rich in hydrocarbons in the off-shore areas of the Bohai Bay Basin. From early depressions in onshore areas to the late depressions in offshore areas of the Bohai Bay Basin, the source rocks and source-reservoir-cap rock assemblages gradually become younger and shallower, and the hydrocarbon resource abundance gradually increases. Hydrocarbon supplying condition is the key factor constraining the hydrocarbon enrichment for different depressions,while the main source-reservoir-cap rock assemblage, sufficient hydrocarbons and the transportation capacity of faults control the vertical distribution of hydrocarbons. The main factors controlling hydrocarbon enrichment are different for different layers. The hydrocarbon supplying condition of source rocks is the key controlling factor, whereas the source-reservoir configuration, the main sourcereservoir-cap rock assemblages, and the fault transportation are the main factors of hydrocarbon enrichment in the Paleogene, Paleogene and Neogene, respectively.

Influential factors and control of water inrush in a coal seam as the main aquifer

In this paper, a combination of field measurement, theoretical analysis and numerical simulation were used to study the main control factors of coal mine water inrush in a main aquifer coal seam and its control scheme. On the basis of revealing and analyzing the coal seam as the main aquifer in western coal mine of Xiao Jihan coal mine, the simulation software of PHASE-2D was applied to analyze the water inflow under different influencing factors. The results showed that water inflow increases logarithmically with the coal seam thickness, increases as a power function with the permeability coefficient of the coal seam, and increases linearly with the coal seam burial depth and the head pressure; The evaluation model for the factors of coal seam water inrush was gained by using nonlinear regression analysis with SPSS. The mine water inrush risk evaluation partition within the scope of the mining field was obtained,through the engineering application in Xiao Jihan coal mine. To ensure the safe and efficient production of the mine, we studied the coal mine water disaster prevention and control measures of a main aquifer coal seam in aspects of roadway driving and coal seam mining.

Analysis of main factors in partial mining subsidence

The partial mining subsidence is a technical method widely used in the mining under buildings. How to calculate the subsidence caused by the partial mining is the key to use this method. By using the numerical calculation method, the main factors affecting the subsidence caused by the partial mining were analyzed, which include the recovery ratio of the partial mining, the width of the mined strip, the thickness and the depth of the mined seam, the conditions of the overburden. The relationship between the partial mining subsidence and the main factors was given according to the calculated results, which provides a theory basis for design and application of the partial mining.

Controlling factors of remaining oil distribution after water flooding and enhanced oil recovery methods for fracturecavity carbonate reservoirs in Tahe Oilfield

Based on comprehensive analysis of core, well logging, seismic and production data, the multi-scale reservoir space, reservoir types, spatial shape and distribution of fractures and caves, and the configuration relationship with production wells in fracture-cavity carbonate reservoirs were studied systematically, the influence of them on the distribution of residual oil was analyzed, and the main controlling factors mode of residual oil distribution after water flooding was established. Enhanced oil recovery methods were studied considering the development practice of Tahe oilfield. Research shows that the main controlling factors of residual oil distribution after water flooding in fracture-cavity carbonate reservoirs can be classified into four categories: local high point, insufficient well control, flow channel shielding and weak hydrodynamic. It is a systematic project to improve oil recovery in fracture-cavity carbonate reservoirs. In the stage of natural depletion, production should be well regulated to prevent bottom water channeling. In the early stage of waterflooding, injection-production relationship should be constructed according to reservoir type, connectivity and spatial location to enhance control and producing degree of waterflooding and minimize remaining oil. In the middle and late stage, according to the main controlling factors and distribution characteristics of remaining oil after water flooding, remaining oil should be tapped precisely by making use of gravity differentiation and capillary force imbibition, enhancing well control, disturbing the flow field and so on. Meanwhile, backup technologies of reservoir stimulation, new injection media, intelligent optimization etc. should be developed, smooth shift from water injection to gas injection should be ensured to maximize oil recovery.

Main geological and mining factors affecting ground cracks induced by underground coal mining in Shanxi Province, China

As one of the largest coal-rich provinces in China,Shanxi has extensive underground coal-mining operations.These operations have caused numerous ground cracks and substantial environmental damage.To study the main geological and mining factors influencing mining-related ground cracks in Shanxi,a detailed investigation was conducted on 13 mining-induced surface cracks in Shanxi.Based on the results,the degrees of damage at the study sites were empirically classified into serious,moderate,and minor,and the influential geological and mining factors(e.g.,proportions of loess and sandstone in the mining depth,ratio of rock thickness to mining thickness,and ground slope)were discussed.According to the analysis results,three factors(proportion of loess,ratio of rock thickness to mining thickness,and ground slope)play a decisive role in ground cracks and can be respectively considered as the critical material,mechanical,and geometric conditions for the occurrence of mining surface disasters.Together,these three factors have a strong influence on the occurrence of serious discontinuous ground deformation.The results can be applied to help prevent and control ground damage caused by coal mining.The findings also provide a direct reference for predicting and eliminating hidden ground hazards in mining areas.

Main Controlling Factors and Accumulation Model of Chang 9 Reservoir in Northwest Ordos Basin, China

In northwestern Ordos Basin, the Triassic reservoir Chang 9 has favorable reservoir forming conditions, extensive reservoir development, and huge potential for oil exploration and exploitation. Studying the main controlling factors and accumulation model of Chang 9 reservoir in this area can provide a basis for the production targets, and assist in formulating reasonable development technology policy. In this paper, to explore and summarize the hydrocarbon accumulation model, the Chang 9 reservoir were analyzed from the aspects of oil source, fracture, oil migration, structure, lithology and reservoir physical properties for the main controlling factors in this area. Organic geochemical and geological comprehensive analysis that the oil-source of the Chang 9 reservoir in the northwest of Ordos Basin is derived from Chang 7 hydrocarbon source rocks. The fractures provide a sound channel for the "vertical multi-point filling" of the oil source from Chang 7 to Chang 9. The crude oil migrates vertically from Chang 7 to Chang 9, then expands horizontally to form a reservoir. Structures play an important role in controlling the distribution of reservoirs, the control by sand in small layer and physical property is also obvious. This paper creatively establishes the reservoir accumulation model of Chang 9 in northwest of Ordos Basin, which is characterized by Vertical multi-point filling, horizontal expansion becomes oil pool. It reveals the genetic mechanism of the development of Chang 9 multi-reservoir in the study area, which provides guidance for exploration and evaluation deployment.

Study on the Main Controlling Factors of the Early Ordovician Stromatolites Development in Liujiachang Area of Songzi City

The Early Ordovician stromatolites in the study area are mainly exposed at the bottom and middle and lower parts of the Second Member of Nanjinguan Formation,the top of the Fourth Member of Nanjinguan Formation,the middle of the Second Member of Fenxiang Formation and the bottom of the First Member of Honghuayuan Formation.In order to find out the controlling factors of Lower Ordovician stromatolites development in the study area,the analysis data of carbon,oxygen isotope samples,macro element samples as well as their variation characteristics are studied and then combined them with previous research results,which is eventually beneficial for reaching the conclusion:sea level change is one of the main factors controlling the formation of stromatolites.There are five sea level change cycles in the Early Ordovician period.The analysis of sea level change and accommodation space variation characteristics show that when the growth rate of the accommodation space is approximately equal to that of carbonate,the circulation of seawater is well,and the amount of light and oxygen is sufficient,so that the cyanobacteria organism can be multiplied in large quantities.The growth and development provide favorable conditions,and favorable conditions are provided for the growth and development of stromatolites;The peak changes in CaO content and CaO/MgO ratio indicate that the formation period of stromatolites is arid climate environment with high water temperature and large evaporation.Prokaryote reproduction is suitable for the environments with high seawater cleanliness.When the amount of land-based debris injected into the sea increases,the turbidity of water will lead to a large number of deaths of algae microorganisms that form stromatolites,and the stromatolitic microbial mats cannot be preserved.In addition,the growth and predation of macro-organisms play a restrictive role in the development of stromatolite-forming micro-organisms blue-green algae.According to the actual situa-tion of the development of the laminated rocks in the study area,what is the dominant function in the formation and decline of stromatolites between the evolution of metazoans and changing environments is discussed in the study.

冲击地压主控因素及孕灾机制

随着我国煤矿逐步向深部开采转移,冲击地压灾害日趋严重。在冲击地压从机理认知走向防冲工程进程中,首要的任务是厘清冲击地压孕灾主控因素,并进行风险程度判识。在上百个冲击地压矿井致灾评价分析基础上,提出了导致冲击地压发生的4类客观主控因素:煤岩冲击倾向性、开采深度、坚硬顶板、地质构造,以及3类人为主控因素:煤柱、采空区及采掘卸荷,并对各主控因素对冲击地压孕灾的力学机制进行了分析讨论。在客观主控因素方面,煤岩冲击倾向性是煤岩积聚变形能进而诱发冲击破坏的自身属性;开采深度与巷道围岩内积聚的变形能呈正相关关系,是冲击地压发生的必要条件;坚硬顶板大尺度周期断裂形成的冲击动载及动能是诱发冲击地压的“导火索”;地质构造对冲击地压的影响显著,对于断层构造而言,断层两盘将在开采扰动造成的突发卸荷影响下产生相对“回弹”;煤层变薄区等效弹性模量变大,超前支承压力呈“双峰值”分布,使得冲击影响范围扩大。在人为主控因素方面,煤柱作为高应力集中区,其尺寸、倾角及相对位置等将直接影响冲击地压发生的概率和强度;采空区会诱发超前支承压力集中区内围岩积聚弹性能的突然释放,尤其是在采高较大、顶板垮落不充分的情况下;采掘卸荷会导致应力集中区快速“迁移”,引发煤体内弹性应变能的大量释放,是造成冲击地压的重要外因条件。在此基础上,对山东新汶、山东鲁西、内蒙古鄂尔多斯、陕西彬长、新疆和甘肃等矿区冲击地压孕灾主控因素差异性,进行了对比分析,强调按层次对矿井、采区和工作面进行冲击地压主控因素及其影响程度判识重要性,构建了从降能、释能、阻能到抗能的冲击地压治理工程路径。

四川盆地下寒武统筇竹寺组海相页岩气高产井突破与富集模式

多年来下寒武统筇竹寺组页岩气勘探开发进展缓慢,资201井获高产气流大大增加了该套页岩气规模商业化开发的信心,不同区域及层段富集规律差异及下一步勘探开发方向是筇竹寺组页岩开发面临的首要问题。以四川盆地57口钻井资料为基础,对多口重点井的古生物、沉积、储层等特征进行分析,详细剖析资201井的部署理论依据、筇竹寺组页岩气富集条件及下一步勘探开发方向。从地层研究入手,建立了筇竹寺组地层划分标准,明确筇竹寺组主体发育4套深水陆棚相的富有机质页岩(①至④号层段),其分布受裂陷槽发育控制,裂陷槽内厚度最大。分析了页岩储层发育特征,指出储层压力、孔隙度、含气饱和度从下向上、从裂陷槽外到内呈现增大趋势,储层超压对页岩孔隙保存起到重要作用;基于此结合保存条件等建立了“多层异相、超压保孔”的页岩气超压差异富集模式,指出远离散失通道的超压孔隙发育区(层段)是页岩气富集有利区(层段)。文章指出资201井及周边是未来筇竹寺组页岩气增储上产的主要区域,资源量为8.06×10^(12)m^(3);川西地区具有相当的开发潜力,资源量为0.72×10^(12)m^(3);川南长宁及黔北一带受石墨化及构造活动影响,以寻找远离风化壳及地表露头的超压孔隙发育区为主。

深井松软围岩煤巷采动增跨效应及防控技术

针对深井松软煤巷围岩变形严重、巷道支护困难等问题,以城郊煤矿LW21106工作面沿空巷道为工程背景,建立了采动巷道增跨模型,揭示了采动增跨效应演化机理。通过构建巷道顶板横纵弯曲梁模型,指出顶板横向受力、巷道等效跨度、煤岩强度是巷道围岩损伤破坏的主控因素,提出了采动增跨效应防控对策并进行工业性试验。研究结果表明:受采动影响,巷道经历“初始围岩稳定—围岩裂隙发育扩展—围岩剪切破坏加剧—等效跨度增加”过程;巷道顶板最大正应力与应力集中系数、顶板等效跨度、巷道断面尺寸及埋深成正相关关系;巷道顶板在高应力环境下易发生拉剪破坏,增加顶板锚索数量以及锚索预紧力有利于增强顶板初期完整性。基于巷道变形破坏主控因素,提出“围岩加固–卸压–强化支护”协同防控策略;针对现场条件,采用煤柱侧向切顶+注浆加固并对破碎区域补充锚索强化支护的防控技术。现场监测结果表明,煤柱帮最大移近量为18.89cm,顶板下沉量为25.86cm,两帮移近量为29.65 cm,有效控制了煤巷围岩变形,为深井松软围岩巷道变形控制提供了参考。

基于子模型的主轴承螺纹疲劳强度分析方法

针对气缸体主轴承螺纹疲劳强度分析与开裂失效问题,基于气缸体主轴承壁疲劳试验构建了虚拟仿真模型,计算获得主轴承壁的应力分布。在此基础上,结合气缸体主轴承壁疲劳试验结果,重新划分网格建立了精细化的主轴承螺纹联接子模型。综合考虑应力梯度、平均应力和表面粗糙度等因素,基于临界平面法和Haigh图建立了主轴承螺纹疲劳强度模型,进行了疲劳强度评估和失效机理分析。结果表明,主轴承螺纹与螺栓联接前几扣的安全系数在螺栓预紧力产生的平均应力影响下逐渐增大,最后一扣位置处安全系数最小为0.8,与试验中开裂位置基本吻合,其开裂原因为模拟气体力主导的应力幅超出材料和结构承载能力。

页岩储层非构造裂缝研究进展与思考

随着我国对非常规油气勘探理论的完善和技术的提高,页岩油气勘探开发不断获得突破,其战略地位也在不断上升。页岩储层的品质通常是制约其资源潜力的主要因素,其中裂缝是页岩油气富集、高产、稳产的关键。因此裂缝作为富有机质页岩储层重要的储集空间和渗流通道,其相关研究一直都是该领域内的重点。我国页岩储层内天然裂缝大量发育,而非构造裂缝同样比较发育,对页岩油气的富集和保存评价亦具有重要意义。目前对页岩储层构造裂缝的研究比较深入,而对页岩非构造裂缝的研究则相对薄弱。为此本文在充分调研近年来国内外页岩非构造裂缝研究成果的基础上,重点梳理了非构造裂缝的分类、识别与表征、主控因素、期次及演化序列等方面的研究进展。页岩储层非构造裂缝以成因和形态复杂、分布不规则、尺度较小为特征,依据成因机制差异可将其分为成岩缝、异常高压缝、层理缝和表生缝4个大类,它们的识别与表征目前主要还停留在定性描述的阶段;尽管不同类型的非构造缝主控因素存在差异,但均在不同程度上受控于沉积作用、成岩作用、矿物组分及含量、岩石力学性质,呈现出一定的共性。综合分析并指出了页岩储层非构造裂缝研究的关键问题及发展趋势:一是基于页岩储层岩心、薄片、成像测井、常规测井的典型特征,结合先进图像技术,建立不同类型不同尺度非构造裂缝综合有效识别与定量化表征新方法。二是针对页岩储层非构造裂缝的形成发育具有“多成因类型、多控制因素、多期次演化”的特点,并且页岩非构造裂缝的形成与演化与“古温压、古流体、古成岩”过程联系紧密。据此提出了利用页岩储层非构造裂缝中普遍存在的方解石等充填物的流体地球化学、同位素地球化学(C,O,Sr)及微区原位同位素年代学(U-Pb,Sm-Nd)等先进实验分析技术,综合确定页岩储层非构造裂缝形成时间和活动期次及演化序列是未来研究的关键手段。三是由页岩储层非构造裂缝发育程度与单因素主控因素之间的定性-半定量分析,向多个主控因素耦合控制下的非构造裂缝发育程度的定量研究方向发展,即采用数学方法确定不同主控因素对于裂缝发育程度影响的权重,并构建适合我国页岩非构造裂缝发育程度的综合指数与多个主控因素之间的定量关系模型。

窄河道型致密砂岩储层特征及主控因素——以天府气田金华区块沙溪庙组为例

四川盆地天府气田金华区块沙溪庙组发育典型的窄河道型致密砂岩储层,具有低孔、低渗特征。基于详实的野外及岩心观察,结合薄片、扫描电镜及CT、核磁等分析测试,通过储层沉积微相、孔隙结构、成岩作用综合研究,阐明了储层发育主控因素。研究表明:1)天府气田沙二段沉积相以泛滥平原陆上河流相为主,河道微相储层物性最佳,河道窄而细,常呈北东—南西向展布;2)储层岩石类型主要为岩屑长石砂岩,石英体积分数由下向上有明显增加趋势,孔隙类型以残余原生粒间孔为主,其次为粒内溶孔;3)孔隙结构表现为低孔喉、低分选、强非均质性特征,根据压汞参数,储层类型可细分为3类;4)影响储层的主要成岩作用为胶结和溶蚀,胶结作用具有破坏和保护双重影响,既可通过方解石胶结减孔,又可通过绿泥石环边胶结抑制压实,“富长石”背景下的长石溶蚀作用有效改善了储层。研究认为,天府气田金华区块优质的高能窄河道砂体、中浅埋藏残余的规模原生孔隙、叠加绿泥石环边抗压实及长石规模溶蚀作用改善储层,三者共同形成“窄河道非连续甜点”的成储模式。该典型模式的建立为天府气田的可持续开发提供了重要的理论支撑。

西非Termit盆地石油地质特征及成藏主控因素

西非Termit盆地是中国石油在非洲极为重要的勘探开发区块。在充分利用钻井、分析化验和地震资料基础上,开展了Termit盆地石油地质特征和成藏主控因素研究,研究表明:①Ter-mit盆地历经前裂谷期、同裂谷期、后裂谷期三大构造演化阶段,同裂谷期发育早晚两期裂谷作用形成中生代—新生代叠置裂谷盆地,宏观具有“东西分带、南北分块”的构造结构特征,控制圈闭的形成与分布。②发育上白垩统Yogou组分布广(18000 km^(2))、厚度大(600~1400 m)、成熟度适中(Ro值为0.7%~1.3%)的海相烃源岩,配置上白垩统Yogou组顶部发育的海相三角洲、古近系Sokor1组辫状河三角洲砂体,及古近系Sokor2组区域性分布的泥岩盖层,形成了上、下两套成藏组合;③明确古近系、白垩系成藏主控因素,古近系为“下生上储”的次生油气藏,油气平面和垂向分布受生烃灶、区域盖层、油源断层和优势沉积相控制,白垩系为“自生自储”原生油藏,油气富集受区域构造活动强度和白垩系内幕构造控制。④构建了基于海相广覆式烃源岩的跨世代油气成藏模式,明确Dinga断阶带、Fana凸起和Araga地堑是古近系油气勘探的有利区带,造活动相对较弱的Moul凹陷及Dinga断阶带南部是白垩系油气勘探的有利区带。地质认识指导勘探部署,在尼日尔Termit盆地获得了重大勘探突破,累计探明石油地质储量超7亿t,为中国石油海外油气增储上产奠定了坚实的基础。

海拉尔盆地油气勘探新领域、新层系及资源潜力

海拉尔盆地是“十四五”(2016―2020年)大庆油田持续有效发展资源接替的重要领域,历经多年勘探,已在乌尔逊凹陷的苏仁诺尔构造带、乌东斜坡带和贝尔凹陷的贝中次凹、苏德尔特构造带、霍多莫尔构造带、呼和诺仁构造带及巴彦塔拉构造带等富油凹陷的主体构造提交了储量。面临剩余更加复杂的勘探对象,按照以往常规油气勘探思路已不能满足勘探发现的需要。为了搞清楚海拉尔盆地的剩余资源类型、成藏特征、潜力,基于盆内钻井岩心岩屑、测井、地震等资料,总结全层系、全盆地主力源岩分布、不同类型储层特征及源储组合特征,指出潜在资源类型、控制要素、分布模式、增储潜力。结果表明:富油凹陷的深凹区致密油、侏罗系塔木兰沟组、基岩潜山还具备较大勘探潜力,剩余资源总量达9.08×10^(8)t;已经在构造带提交的常规油藏储量1.5×10^(8)t只占总资源量的14.2%,其中致密油资源依托南屯组一段为主要源岩,源上、源下致密类型在深凹区叠置连片分布,剩余资源潜力为3.84×10^(8)t;侏罗系塔木兰沟组自生自储,近源成藏,剩余资源潜力为2.37×10^(8)t;潜山油藏通过通源断层、生油层不整合覆盖,源储侧接,内幕及表层一体化成藏,剩余资源潜力为2.87×10^(8)t。研究成果可推动海拉尔盆地及其类似断陷盆地全油气资源的高效勘探,并提供技术和勘探实践参考。

玛湖凹陷及周缘白碱滩组勘探突破与新认识

为明确玛湖凹陷白碱滩组砂体分布规律和油气成藏模式,评价其油气勘探前景,综合钻井、测井、地震、分析化验等资料,系统梳理白碱滩组二段沉积规律和成藏特征。白碱滩组二段为辫状河三角洲—滩坝—浊积扇沉积序列,发育水下分流河道砂、滩坝砂和浊积砂3种不同类型的砂体,辫状河三角洲前缘亚相以河道砂为主,滨—浅湖发育滩坝砂,半深湖—深湖受坡折带控制发育多个浊积扇体,浊积砂呈朵叶状分布,建立了水下分流河道—滩坝—浊积扇的沉积控砂模式。研究区发育9大走滑断裂体系,其中,走滑断裂直通型、走滑断裂伴生型和走滑断裂接力型3种断裂组合能够有效沟通二叠系风城组烃源岩,作为油气垂向高效运移通道,白碱滩组二段整体具有走滑断裂通源、断裂砂体配置控藏和优质储集层富集的成藏模式。

致密油储层含油性主控因素及分布特征——以鄂尔多斯盆地红河油田36井区长8油层组为例

鄂尔多斯盆地红河油田地质条件复杂,含油非均质性极强,导致水平井产能差异及开发难度大。文中基于钻、测、录井及岩心测试、生产动态等资料,对红河油田36井区长8油层组含油性主控因素及含油饱和度分布特征开展了研究。结果表明:1)红河油田由于油气充注强度整体较低,呈现“大面积含油、局部富集”的特点。2)断裂与储层物性是控制含油性的2个主要因素,不同尺度断裂及其伴(派)生裂缝带的含油性差异大。其中:中尺度断裂及其伴(派)生裂缝带既是良好的源-储输导体系,也能改善储层物性,是主要的油气富集带(区);裂缝带以外的基质区主要受储层物性影响,在优质储层发育部位,可发育形成次油气富集区。3)研究区存在断-缝输导成藏和源-储接触成藏2种油气成藏模式,由此建立了长8油层组致密油藏含油性差异成因模式,明确了高含油饱和度区呈“裂缝带内条带状分布、裂缝带以外沿优质储层片状分布”的特征,“雁列式中尺度断裂+优质储层”部位为有利的开发目标区。