Reliability-BasedModel for Incomplete Preventive ReplacementMaintenance of Photovoltaic Power Systems

At present,the operation and maintenance of photovoltaic power generation systems mainly comprise regular maintenance,breakdown maintenance,and condition-based maintenance,which is very likely to lead to over-or under-repair of equipment.Therefore,a preventive maintenance and replacement strategy for PV power generation systems based on reliability as a constraint is proposed.First,a hybrid failure function with a decreasing service age factor and an increasing failure rate factor is introduced to describe the deterioration of PV power generation equipment,and the equipment is replaced when its reliability drops to the replacement threshold in the last cycle.Then,based on the reliability as a constraint,the average maintenance cost and availability of the equipment are considered,and the non-periodic incomplete maintenance model of the PV power generation system is established to obtain the optimal number of repairs,each maintenance cycle and the replacement cycle of the PV power generation system components.Next,the inverter of a PV power plant is used as a research object.The model in this paper is compared and analyzed with the equal cycle maintenance model without considering reliability and the maintenance model without considering the equipment replacement threshold,Through model comparison,when the optimal maintenance strategy is(0.80,4),the average maintenance cost of this paper’s model are decreased by 20.3%and 5.54%and the availability is increased by 0.2395% and 0.0337%,respectively,compared with the equal-cycle maintenance model without considering the reliability constraint and the maintenance model without considering the equipment replacement threshold.Therefore,this maintenance model can ensure the high reliability of PV plant operation while increasing the equipment availability to improve the system economy.

Remaining Useful Life Prediction Method for Multi-Component System Considering Maintenance:Subsea Christmas Tree System as A Case Study

Maintenance is an important technical measure to maintain and restore the performance status of equipment and ensure the safety of the production process in industrial production,and is an indispensable part of prediction and health management.However,most of the existing remaining useful life(RUL)prediction methods assume that there is no maintenance or only perfect maintenance during the whole life cycle;thus,the predicted RUL value of the system is obviously lower than its actual operating value.The complex environment of the system further increases the difficulty of maintenance,and its maintenance nodes and maintenance degree are limited by the construction period and working conditions,which increases the difficulty of RUL prediction.An RUL prediction method for a multi-omponent system based on the Wiener process considering maintenance is proposed.The performance degradation model of components is established by a dynamic Bayesian network as the initial model,which solves the uncertainty of insufficient data problems.Based on the experience of experts,the degree of degradation is divided according to Poisson process simulation random failure,and different maintenance strategies are used to estimate a variety of condition maintenance factors.An example of a subsea tree system is given to verify the effectiveness of the proposed method.

A Preliminary Study on the Rural Land System Reform in the Context of Rural Revitalization

With the deepening of reform and opening up,the rural land system has experienced the evolution from contracting to transfer to the current rural revitalization strategy,and has always been closely linked to the well-being of farmers and the vigorous development of the rural economy.The reform of this system is not only a key driving force for rural economic development,but also an important cornerstone for realizing the rural revitalization strategy.Through in-depth analysis of the connotation of rural revitalization and rural land system reform,this study discusses in detail the internal dynamic mechanism of rural land system reform driving rural revitalization,and comprehensively analyzes the current implementation of rural land system reform.On this basis,this study puts forward the strategic concept of promoting the rural land system reform in the context of rural revitalization.Studies have shown that the rural land system reform has mainly played a positive role in the following four aspects in promoting rural revitalization:providing a solid material foundation for rural revitalization,optimizing the allocation of rural resources,promoting the transformation and upgrading of rural industrial structure,and promoting rural social harmony and stability.In the context of the current rural revitalization,the rural land system reform is undoubtedly one of the core issues of China s rural development.In order to further improve this system,we need to continue to optimize and innovate the rural land transfer system,the homestead reform system,and the rural collective construction land market entry system.

AVAILABILITY SIMULATION OF MULTI-COMPONENT SYSTEM BASED ON OPPORTUNISTIC MAINTENANCE POLICY

A multi-component system has the long fixed maintenance time, so the opportunistic maintenance policy is adopted to put preventive replacement and corrective replacement together, so that the long fixed maintenance time can be shared by more than one component, and the system availability can be improved. Then, the generation characteristics of the random failure time are researched based on the replacement maintenance and the minima[ maintenance. Furthermore, by choosing the opportunistic replacement ages of each component as opti- mized variables, a simulation algorithm based on an opportunistic maintenance policy is designed to maximize the total availability. Finally, the simulation result shows the validity of the algorithm by an example.

Optimal quasi-periodic maintenance policies for two-unit series system

To investigate the effects of various random factors on the preventive maintenance （PM） decision-making of one type of two-unit series system, an optimal quasi-periodic PM policy is introduced. Assume that PM is perfect for unit 1 and only mechanical service for unit 2 in the model. PM activity is randomly performed according to a dynamic PM plan distributed in each implementation period. A replacement is determined based on the competing results of unplanned and planned replacements. The unplanned replacement is trigged by a catastrophic failure of unit 2, and the planned replacement is executed when the PM number reaches the threshold N. Through modeling and analysis, a solution algorithm for an optimal implementation period and the PM number is given, and optimal process and parametric sensitivity are provided by a numerical example. Results show that the implementation period should be decreased as soon as possible under the condition of meeting the needs of practice, which can increase mean operating time and decrease the long-run cost rate.

Instrument Automation Control System Faults and Maintenance

This article explores the topic of fault diagnosis and maintenance strategies for instrument automation control systems,analyzing them through specific cases.The aim of this research is to improve the stability and reliability of the system by conducting a thorough investigation of faults and maintenance in instrument automation control systems.By doing so,this research hopes to provide a strong guarantee for the smooth progress of industrial production.

Application Strategy of Digital Comprehensive Management and Maintenance System for Bridges

Effective application of digital integrated management and maintenance systems is essential for successful operation and maintenance management of bridge projects.This article analyzes the application strategy of such systems.It provides an overview of comprehensive digital management and maintenance of bridges,an analysis of the basic components of the integrated management and maintenance system,and its application strategies.This study aims to offer guidance for the application of the system and to improve the quality of modern bridge engineering management and maintenance work.

Teaching Reform and Practice of Embedded System Design Based on Outcome-Based Education

Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditional teaching,this paper proposes curriculum teaching reform based on the outcome-based education(OBE)concept,including determining course objectives,reforming teaching modes and methods,and improving the curriculum assessment and evaluation system.After two semesters of practice,this method not only enhances students’learning initiative but also improves teaching quality.

Research on Maintenance Information Management System for Distributed Manufacture System

An architecture and design of a maintenance information management system for distributed manufacture system is presented in this paper, and its related key technologies are studied and implemented also. A frame of the maintenance information management system oriented human-machine monitoring is designed, and using object-oriented method, a general maintenance information management system based on SQL server engineering database and adopted client/server/database three-layer mode can be established. Then, discussions on control technologies of maintenance information management system and remote distributed diagnostics and maintenance system are emphasized. The system is not only able to identify and diagnose faults of distributed manufacture system quickly, improve system stability, but also has intelligent maintenance functions.

A dynamic condition-based maintenance optimization model for mission-oriented system based on inverse Gaussian degradation process

An effective maintenance policy optimization model can reduce maintenance cost and system operation risk. For mission-oriented systems, the degradation process changes dynamically and is monotonous and irreversible. Meanwhile, the risk of early failure is high. Therefore, this paper proposes a dynamic condition-based maintenance(CBM) optimization model for mission-oriented system based on inverse Gaussian(IG) degradation process. Firstly, the IG process with random drift coefficient is used to describe the degradation process and the relevant probability distributions are obtained. Secondly, the dynamic preventive maintenance threshold(DPMT) function is used to control the early failure risk of the mission-oriented system, and the influence of imperfect preventive maintenance(PM)on the degradation amount and degradation rate is analysed comprehensively. Thirdly, according to the mission availability requirement, the probability formulas of different types of renewal policies are obtained, and the CBM optimization model is constructed. Finally, a numerical example is presented to verify the proposed model. The comparison with the fixed PM threshold model and the sensitivity analysis show the effectiveness and application value of the optimization model.

Research and Development of a Network-Based Intelligent Maintenance Information System

A maintenance information system is an important part of equipmentmanagement. An intelligent maintenance information system (IMIS) is a synthesis of networktechnology, information technology and intelligent technology. The IMIS is used to finish flexiblemaintenance decision-making and fast maintenance planning, which helps enterprises to effectivelyreduce maintenance cost and increase working efficiency. Because the IMIS integrates advancedtechnologies, its performance is better than a traditional one. The difference between an IMIS and atraditional maintenance information system, and the functions, structure, important realizations,and application of an IMIS are discussed in this paper.

Research on the Reform of the Process-Tracking Ideological and Political Assessment System in Applied Universities:Taking the Personal Finance Course as an Example

Using the Xi’an Mingde Institute of Technology students as the teaching object and the Personal Finance course as an example,we explore the reform of the ideological and political assessment system of process-tracking courses in applied universities.The article analyzes the feasibility of applying the curriculum ideological and political assessment system in college courses and compares the traditional assessment system.It also proposes that applying curriculum ideological and political assessment to the college curriculum assessment system will help improve students’understanding of the“value guidance”in curriculum ideological and political education and enhance the teaching effect.

An Assessment of China's New Round of Reform of the Fiscal and Taxation Systems

Based on the Decisions of the CPC Central Committee on Some Major Issues Concerning Comprehensively Deepening Reforms and the Overall Plan on Deepening Fiscal and Tax Reforms, this paper presents a systematic assessment of the progress of China's new round of fiscal and tax reforms from November 2013 to October 2016 with the following findings. Reform of the budgetary management system has yielded initial results yet remains in the preliminary stage. While progress has been made in reforming indirect taxes, the reform of direct taxes is slow and presents a major obstacle. Despite breakthroughs, the progress of public finance reforms remains slow and impedes reforms on other fronts. Fiscal and tax reforms are uneven and should be implemented in coordination. Fiscal and tax reforms should more vigorously support overall reforms.

Designand development of highway tunnel maintenance and management system

In order to solve the urgent problem of how to manage and sustain highway tunnels with advanced information technology with the background of the rapid development in the modem traffic, and achieve the cost- effectiveness optimal principle objectives under the premise of guaranteeing a smooth flow of traffic; a highway tunnel maintenance and management system framework and the key modules were proposed. First, the determined highway tunnel condition assessment index system was established according to the result of expert consulting forms. Secondly, the tunnel diseases, the corresponding maintenance measurements, and many-to-many relationship between diseases and maintenance measurements were introduced. Then, three kinds of 0-1 integer programming models were built according to different tunnel operators＇ needs in the optimization decision module. Finally, the further development and implementation of the system was prospected. The research results can provide references to tunnel researchers and managers.

Research on the Joint Reformation for Public Health Services, Medical Insurance and Medical Production Circulation from the Perspective of System Science

Objective To study the linkage points in the reform of public health services,medical insurance and medical production circulation and provide countermeasures for optimizing the reform.Methods The theory of system science was used to analyze the new emergent property of key linkage points in the main reform departments.Results and Conclusion The research found that four linkage points were not active,and all departments of the reform should strengthen their linkage in the following aspects.The departmental linkage in the decision-making mechanism should be strengthened,which requires to revise the assessment indicators of essential drugs in time,and carry out relevant policies.Besides,the linkage of various departments to supervise the use of medical insurance fund should be strengthened.Therefore,the National Health Commission(NHC)and National Medical Products Administration(NMPA)should play their supervisory roles.Lastly,the construction of adverse reaction data sharing platform should be improved.

Reform and Practice of the Course“Introduction to Computer Science”in Universities Based on the Cultivation of Computational Thinking and Systematic Abilities

Introduction to Computer Science,as one of the fundamental courses in computer-related majors,plays an important role in the cultivation of computer professionals.However,traditional teaching models and content can no longer fully meet the needs of modern information technology development.In response to these issues,this article introduces the concept of computational creative thinking,optimizes course content,adopts exploratory teaching methods,and innovates course assessment methods,aiming to comprehensively enhance students’computational thinking and innovative abilities.By continuously improving and promoting this teaching model,it will undoubtedly promote computer education in universities to a new level.

Performance of a Combined Energy System Consisting of Solar Collector, Biogas Dry Reforming and Solid Oxide Fuel Cell: An Indian Case Study

An energy production system consisting of a solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) was assumed to be installed in Kolkata, India. This study aims to understand the impact of climate conditions on the performance of solar collectors with different lengths of parabolic trough solar collector (dx) and mass flow rate of heat transfer fluid (m). In addition, this study has evaluated the amount of H2 produced by biogas dry reforming (GH2), the amount of power generated by SOFC (PSOFC) and the maximum number of possible households (N) whose electricity demand could be met by the energy system proposed, considering the performance of solar collector with the different dx and m. As a result, the optimum dx was found to be 4 m. This study revealed that the temperature of heat transfer fluid (Tfb) decreased with the increase in m. Tfb in March, April and May was higher than that in other months, while Tfb from June to December was the lowest. GH2, PSOFC and N in March, April and May were higher than those in other months, irrespective of m. The optimum m was 0.030 kg/s.

Condition-based maintenance policy for gamma deteriorating systems

A condition-based maintenance model for gamma deteriorating system under continuous inspection is studied. This methodology uses a gamma distribution to model the material degradation, and the impact of imperfect maintenance actions on the system reliability is investigated. The state of a degrading system immediately after the imperfect maintenance action is assumed as a random variable and the maintenance time follows a geometric process. Furthermore, the explicit expressions for the long-run average cost and availability per unit time of the system are evaluated, an optimal policy （ε^＊） could be determined numeri- cally or analytically according to the optimization model. At last, a numerical example for a degrading system modeled by a gamma process is presented to demonstrate the use of this policy in practical applications.

Reform of Practical Teaching of “Linux Operating System Fundamentals” Under the Background of Emerging Engineering Education

With the advancement of the construction of emerging engineering education,the reform of practical teaching has become an important task of higher engineering education.This article takes the course“Linux Operating System Fundamentals”as an example to explore practical teaching reform in the context of emerging engineering education.By analyzing the current situation and problems in course practical teaching,we proposed practical teaching reforms such as online experiments,practical content updates,project-based engineering practices,and diversified evaluation models,and designed corresponding implementation plans.Practice has proved that this reform can improve students’learning interest and engineering practical skills,and cultivate outstanding engineers with innovative spirit and practical skills.

Opportunistic maintenance for multi-component systems considering structural dependence and economic dependence

Although opportunistic maintenance strategies are widely used for multi-component systems, all opportunistic mainte- nance strategies only consider economic dependence and do not take structural dependence into account. An opportunistic main- tenance strategy is presented for a multi-component system that considers both structural dependence and economic dependence. The cost relation and time relation among components based on structural dependence are developed. The maintenance strategy for each component of a multi-component system involves one of five maintenance actions, namely, no-maintenance, a minimal maintenance action, an imperfect maintenance action, a perfect maintenance action, and a replacement action. The maintenance action is determined by the virtual age of the component, the life expectancy of the component, and the age threshold values. Monte Carlo simulation is designed to obtain the optimal oppor- tunistic maintenance strategy of the system over its lifetime. The simulation result reveals that the minimum maintenance cost with a strategy that considers structural dependence is less than that with a strategy that does not consider structural dependence. The availability with a strategy that considers structural dependence is greater than that with a strategy that does not consider structural dependence under the same conditions.