Molecularly imprinted polymers(MIPs) were applied as molecular recognition elements to an electro- chemical sensor for cinchonidine(CD). A kind of MIP was synthesized with cinchonidine as template, modified ro- si...Molecularly imprinted polymers(MIPs) were applied as molecular recognition elements to an electro- chemical sensor for cinchonidine(CD). A kind of MIP was synthesized with cinchonidine as template, modified ro- sin(ethylene glycol maleic rosinate acrylate) containing the skeleton of phenanthrene rings as cross-linker and me- thylacrylic acid as functional monomer. MIP membrane was prepared on a glassy carbon electrode for the determina- tion of CD via free radical polymerization method. Electrochemical impedance spectroscopy(EIS) and cyclic vol- tammetry(CV) were used to characterize the membrane electrochemical behavior in electrode fabrication process. The experimental conditions were discussed. Under optimum conditions, it was found that the response of peak cur- rents was linear to the concentration of CD in a range of 0.013-2.26 mmol/L. The detection limit for CD is 1 μmol/L the relative standard deviation for 100 μmol/L CD is 1.34% and the incubation time is 2 min. The sensor was applied to the determination of CD in urine samples with satisfactory results.展开更多
1 Results Rosin is a sort of important renewable resources,which is a foremost product of our country forestry. It has very important meaning to modify the rosin based on its molecule structure and active group, to de...1 Results Rosin is a sort of important renewable resources,which is a foremost product of our country forestry. It has very important meaning to modify the rosin based on its molecule structure and active group, to develop some deep processing products, and to endure with rosin new characteristic[1]. This work uses the rosin and acrylic acid to form rosin adduct, and then reacted with 2-hydroxyethyl methacrylate (HEMA) to form ester under the different condition. The effect of different ratios with the ...展开更多
在微波辐射下,先将歧化松香与聚乙二醇进行酯化反应,合成中间体歧化松香聚乙二醇酯,再将中间体与苹果酸进行酯化反应,合成目标产物歧化松香聚乙二醇苹果酸酯,研究了中间体和目标产物的合成条件。结果表明:①中间体合成的最佳条件为:反...在微波辐射下,先将歧化松香与聚乙二醇进行酯化反应,合成中间体歧化松香聚乙二醇酯,再将中间体与苹果酸进行酯化反应,合成目标产物歧化松香聚乙二醇苹果酸酯,研究了中间体和目标产物的合成条件。结果表明:①中间体合成的最佳条件为:反应时间90 m in,反应温度240℃,歧化松香与聚乙二醇的摩尔比为1∶1.6;②目标产物合成的最佳条件为:反应时间60 m in,反应温度140℃,微波功率800 W。利用IR、UV等测试技术对中间体及目标产物进行了结构表征,并测定了它们的主要表面性能。结果表明,中间体和目标产物均为性能优良的新型非离子表面活性剂。展开更多
基金Supported by the National Nature Science Foundation of China(Nos.21065001 and 30960306)the Natural Science Foundation of Guangxi Province,China(Nos.0639025,0991084 and 0991001z)+2 种基金the Fund of Guangxi Key Laboratory of Chemistry and Engineering of Forest Products,China(No.GXFC08-06)the Project of Education Department of Guangxi Province,China(No.200812MS074)the Innovation Project of Guangxi University for Nationalities,China(No.gxun-chx2011086)
文摘Molecularly imprinted polymers(MIPs) were applied as molecular recognition elements to an electro- chemical sensor for cinchonidine(CD). A kind of MIP was synthesized with cinchonidine as template, modified ro- sin(ethylene glycol maleic rosinate acrylate) containing the skeleton of phenanthrene rings as cross-linker and me- thylacrylic acid as functional monomer. MIP membrane was prepared on a glassy carbon electrode for the determina- tion of CD via free radical polymerization method. Electrochemical impedance spectroscopy(EIS) and cyclic vol- tammetry(CV) were used to characterize the membrane electrochemical behavior in electrode fabrication process. The experimental conditions were discussed. Under optimum conditions, it was found that the response of peak cur- rents was linear to the concentration of CD in a range of 0.013-2.26 mmol/L. The detection limit for CD is 1 μmol/L the relative standard deviation for 100 μmol/L CD is 1.34% and the incubation time is 2 min. The sensor was applied to the determination of CD in urine samples with satisfactory results.
文摘1 Results Rosin is a sort of important renewable resources,which is a foremost product of our country forestry. It has very important meaning to modify the rosin based on its molecule structure and active group, to develop some deep processing products, and to endure with rosin new characteristic[1]. This work uses the rosin and acrylic acid to form rosin adduct, and then reacted with 2-hydroxyethyl methacrylate (HEMA) to form ester under the different condition. The effect of different ratios with the ...
文摘在微波辐射下,先将歧化松香与聚乙二醇进行酯化反应,合成中间体歧化松香聚乙二醇酯,再将中间体与苹果酸进行酯化反应,合成目标产物歧化松香聚乙二醇苹果酸酯,研究了中间体和目标产物的合成条件。结果表明:①中间体合成的最佳条件为:反应时间90 m in,反应温度240℃,歧化松香与聚乙二醇的摩尔比为1∶1.6;②目标产物合成的最佳条件为:反应时间60 m in,反应温度140℃,微波功率800 W。利用IR、UV等测试技术对中间体及目标产物进行了结构表征,并测定了它们的主要表面性能。结果表明,中间体和目标产物均为性能优良的新型非离子表面活性剂。