Two-stage extraction by partial grinding of impacted mandibular third molar in close proximity to the inferior alveolar nerve

BACKGROUND Extraction of impacted third molars often leads to severe complications caused by damage to the inferior alveolar nerve(IAN).AIM To proposes a method for the partial grinding of an impacted mandibular third molar(IMM3)near the IAN to prevent IAN injury during IMM3 extraction.METHODS Between January 1996 and March 2022,25 patients with IMM3 roots near the IAN were enrolled.The first stage of the operation consisted of grinding a major part of the IMM3 crown with a high-speed turbine dental drill to achieve sufficient space between the mandibular second molar and IMM3.After 6 months,when the root tips were observed to be away from the IAN on X-ray examination,the remaining part of the IMM3 was completely removed.RESULTS All IMM3s were extracted easily without symptoms of IAN injury after extraction.CONCLUSION Partial IMM3 grinding may be a good alternative treatment option to avoid IAN injury in high-risk cases.

Root Canal System Variation in Mandibular Second Molar: Middle-Mesial Canal

Middle-mesial canals in mandibular molars are present in the population depending on age, sex and ethnicity. However, limited literature alludes to its prevalence. Troughing procedures may enhance identification, cleaning and shaping. This case report expresses the recognition and management of middle-mesial canal in a mandibular second molar of 24 years old Hispanic-Latino male.

Transfer learning-based super-resolution in panoramic models for predicting mandibular third molar extraction difficulty: a multi-center study

Background:This study aims to predict the extraction difficulty of mandibular third molars based on panoramic images using transfer learning while employing super-resolution(SR)technology to enhance the feasibility and validity of the prediction.Methods:We reviewed a total of 608 preoperative mandibular third molar panoramic radiographs from two medical facilities:the First Affiliated Hospital of Zhengzhou University(n=509;456 in the training set and 53 in the test set)and the Henan Provincial Dental Hospital(n=99 in the validation set).We conducted a deep-transfer learning network on high-resolution(HR)panoramic radiographs to improve the longitudinal resolution of the images and obtained the SR images.Subsequently,we constructed models named Model-HR and Model-SR using high-dimensional quantitative features extracted through the Least Absolute Shrinkage and Selection Operator method.The models’performances were evaluated using the receiver operating characteristic curve(ROC).To assess the reliability of the model,we compared the results from the test set with those of three dentists.Results:Model-SR outperformed Model-HR(area under the curve(AUC):0.779,sensitivity:85.5%,specificity:60.9%,and accuracy:79.8%vs.AUC:0.753,sensitivity:73.7%,specificity:73.9%,and accuracy:73.7%)in predicting the difficulty of extracting mandibular third molars.Both Model-HR(AUC=0.821,95%CI 0.687–0.956)and Model-SR(AUC=0.963,95%CI 0.921–0.999)demonstrated superior performance compared to expert dentists(highest AUC=0.799,95%CI 0.671–0.927).Conclusions:Model-SR yielded superior predictive performance in determining the difficulty of extracting mandibular third molars when compared with Model-HR and expert dentists’visual assessments.

A Case Report of Kissing Molars Class II

Kissing molars (KMs) is a condition of occlusal molar surfaces in a single follicular space with roots extending in opposite directions. Here, we have reported a case of KMs in a 58-year-old woman. The patient complained of pain in the right mandibular molar region and was diagnosed with KMs consisting of the right mandibular second and third molars. Because of the patient’s pain having subsided at the time of the visit and her unwillingness to undergo tooth extraction, the patient was followed up. KMs is classified into three classes (I-III) and is either true-KMs or pseudo-KMs and presents with or without cystic variants of dental follicles. The presents as true-KMs class II without a cystic variant. With reference to the literature and based on our analysis, the mean age of patients affected by this specific case of KMs is 31.7 years and unilateral KMs is relatively more common (85.7%). Histopathological findings of dentigerous cysts are more often indicated (42.9%). The treatment policy for KMs should therefore be based on the classification of KMs. Importantly, the focus should be on preserving the first and second molars as much as possible. The treatment approach, such as the employment of surgical removal or orthodontics, should be determined by considering the associated factors such as the crowns, tissues, and age of the patient.

Root Canal Treatment of Mandibular First Molar with Radix Entomolaris

Aim: To confirm the effect of root canal treatment on radix entomolaris. Case: Radix entomolaris was an additional root that located on the distolingual of mandibular first molars. In this case, the radix entomolaris was detected clinically and radiographically with root canal configuration such as curves. An awareness and understanding of this unusual root and root canal morphology could contribute to the successful outcome of endodontic treatment. Conclusion: Root canal treatment on this case shows the lack of symptoms and normal radiographic presentation for two months follow-up.

Clinical relevance of distolingual roots and periodontal status in mandibular first molars: a cross-sectional study employing CBCT analysis

Objectives:Distolingual root of the permanent mandibular first molar(PMFM-DLR)has been frequently reported,which may complicate the treatment of periodontitis.This study aimed to assess the morphological features of PMFM-DLR and investigate the correlation between the morphological features of PMFM-DLR and periodontal status in patients with Eastern Chinese ethnic background.Materials and methods:A total of 836 cone beam computed tomography(CBCT)images with 1497 mandibular first molars were analyzed to observe the prevalence of PMFM-DLR at the patients and tooth levels in Eastern China.Among them,complete periodontal charts were available for 69 Chinese patients with 103 teeth.Correlation and regression analyses were used to evaluate the correlation between the morphological features of DLR,bone loss,and periodontal clinical parameters,including clinical attachment loss(CAL),probing pocket depth(PPD),gingival recession(GR),and furcation involvement(FI).Results:The patient-level prevalence and tooth-level prevalence of DLR in mandibular first molars were 29.4%and 26.3%,respectively.Multiple linear regression analysis suggested that bone loss at the lingual site and CAL were negatively affected by the angle of separation between distolingual and mesial roots in the transverse section,while they were significantly influenced by age and the angle of separation between distobuccal and mesial roots in the coronal section.Conclusions:The prevalence of PMFM-DLR in Eastern China was relatively high in our cohort.The morphological features of DLR were correlated with the periodontal status of mandibular first molars.This study provides critical information on the morphological features of DLR for improved diagnosis and treatment options of mandibular molars with DLR.

Incidence of C-shaped root canal systems in mandibular second molars in the native Chinese population by analysis of clinical methods

The aims of the study were to investigate the incidence of C-shaped root canal systems in mandibular second molars in a native Chinese population using radiography and clinical examination under microscope and to compare the relative efficacies of these methods. For the recognition of C-shaped root canal system, 1 146 mandibular second molars were selected and examined. Teeth with C-shaped canal systems were categorized by using the radiographic classification criteria and the modified Melton＇s method. C-shaped canals were identified in 397 （34.64%） mandibular second molars by radiography （type I, 31.23%; type II, 38.29%; type III, 30.48%）. Clinical examination showed that 449 （39.18%） cases exhibited C-shaped canal systems （C1, 22.94%; C2, 48.11%; C3a, 15.59%; C3b, 13.36%）. As for the result of the radiographic and clinical combined examination, C-shaped root canals were found in 473 （41.27%） mandibular second molars （C1, 21.78%; C2, 45.67%; C3a, 16.70%; C3b, 15.86%）. The incidence of C-shaped root canal diagnosed by radiographic method was statistically different from that by clinical examination and the combined examination （P〈O.05）. The study indicated a high incidence of C-shaped canal system in a Chinese population. The combination of microscopic and radiographic examination is an effective method in identifying the C-shaped root canal system.

Three-dimensional analysis of the physiological foramen geometry of maxillary and mandibular molars by means of micro-CT

The aim of this study was to investigate the physiological foramen diameter, shape and distance between physiological and anatomical apex of maxillary and mandibular first and second molars. Accurate knowledge of the physiological foramina morphology; thus, inherent mechanical shaping technical hindrances, is decisive when taking the corresponding root canal final preparation decision. The morphological dimensions of a total of 1 727 physiological foramina were investigated by means of micro-computed tomography. Mean narrow and wide （to a high number, oval） diameters of the physiological foramen were 0.24, 0.22 and 0.33 mm and 0.33, 0.31 and 0.42 mm in mesiobuccal （MB）, distobuccal （DB） and palatal （P） roots in maxillary first molars; 0.24, 0.22 and 0.33 mm and 0.41, 0.33 and 0.44 in MB, DB, and P roots in maxillary second molars. Mandibular first molars showed mean narrow and wide diameters of 0.24 and 0.30 mm and of 0.39 and 0.46 mm in mesial （M） and distal （D） roots; second mandibular molars showed 0.25 and 0.31 mm and 0.47 mm in M and D roots. The mean distance between the physiological foramina and anatomical apex was 0.82, 0.81 and 1.02 mm and 0.54, 0.43 and 0.63 mm in MB, DB and P roots of the maxillary first and second molars, respectively. A mean distance of 0.95 mm （M） and 1.05 mm （D） in the first and 0.78 mm （M） and 0.81 mm （D） in the second mandibular molars was observed. Based on the results obtained, assumable recommendations for final preparation size of the physiological foramen were calculated. However, when taking into consideration, the resulting standard deviations of marginal errors must be cautiously considered when taking a final decision in clinical endodontic treatment.

Successful individualized endodontic treatment of severely curved root canals in a mandibular second molar:A case report

BACKGROUND The incidence rate of severely curved root canals in mandibular molars is low,and the root canal treatment of mandibular molars with this aberrant canal anatomy may be technically challenging.CASE SUMMARY A 26-year-old Chinese female patient presented with intermittent and occlusal pain in the left mandibular second molar.The patient had undergone filling restoration for caries before endodontic consultation.With the aid of cone beam computed tomography(CBCT),a large periapical radiolucency was observed,and curved root canals in a mandibular second molar were confirmed,depicting a severe and curved distolingual root.Nonsurgical treatments,including novel individualized preparation skills and techniques and the use of bioceramic materials as an apical barrier,were performed,and complete healing of the periapical lesion and a satisfactory effect were achieved.CONCLUSION A case of severely curved root canals in a mandibular second molar was successfully treated and are reported herein.The complex anatomy of the tooth and the postoperative effect were also evaluated via the three-dimensional reconstruction of CBCT images,which accurately identified the aberrant canal morphology.New devices and biomaterial applications combined with novel synthesis techniques can increase the success rate of intractable endodontic treatment.

The Buccal Lid Approach for Removal of Impacted Mandibular Molars—When, How and Why?

Background: The surgical removal of impacted mandibular molars represents one of the most prevalent procedures carried out by the oral and maxillofacial surgeon. Despite its prevalence, unusual impaction location of mandibular molars necessitates alternative extraction approaches. One of the methods described for extraction of deeply impacted molars is the bony lid approach which was first presented for surgical endodontic treatment of mandibular molars. The aim of this study was to evaluate the outcome of the bony lid approach in extracting mandibular molars. In addition, critical clinical key points, new aspects while performing this procedure, indications and contraindications are discussed. Materials and Methods: 9 patients were treated with the bony lid technique. A retrospective analysis of medical charts was conducted to evaluate the results of surgery. Results: The operative technique described in the article was successfully carried out in 12 cases of impacted mandibular molars. No incidence of permanent sensory deficit was recorded. In one patient, an infection mandated the removal of the bony lids. In all other cases the healing process was uneventful. Conclusion: The bony lid technique has many advantages over alternative extraction methods and should be considered as a treatment option in cases of critical proximity between an impacted tooth and the inferior alveolar nerve.

Clinical Effect of Resistance-free Removal of the Bone Embedded Mandibular Third Molar

[Objectives] To shorten the time of removal of the bone embedded mandibular third molar,reduce the complications of tooth extraction,and explore a surgery method of resistance-free removal of the mandibular third molar. [Methods] A total of 50 patients with bone embedded mandibular third molar needing to be removed were selected. A 45° elevation turbine and a long tungsten steel drill were used to remove the mesial,buccal,and distal resistances. When necessary,tongue side and root resistance was removed,and the third molar was removed when there was basically no resistance around it. The removal time was recorded,followed up for 10 d,and the postoperative reaction was observed. [Results] The bone embedded mandibular third molars were removed for all patients within 15 min,and there was no serious postoperative reaction,all patients showed high satisfaction. [Conclusions]The method of resistance-free removal of the bone embedded mandibular third molar can significantly shorten the removal time,reduce the fear of patients,and ease pain of patients.

Comparison of an alveolar expansion technique and buccal guttering technique in the extraction of mandibular third molar. A Pilot Study

Background: The over-ambitious use of surgical drills for almost every case of third molar impaction is on the increase in most established oral surgery centers. The purpose of this study was to assess and compare the severity of post operative symptoms of swelling and pain that accompany the use of surgical drill in the buccal guttering technique and the non application of drill in an alveolar expansion technique. Methods: Consecutive patients with bilateral impacted lower third molars not associated with pericoronitis were included in the study, a total of 10 patients were included in the study. Extraction of both impacted third molars was done consecutively on the same day under local anaesthesia. Post operative morbidities that were assessed clinically are swelling and pain. Results: A total of 10 patients, 70% were females and males were 30%. Age range was 27 - 35 yrs.Out of the eight patients that had the two different techniques, 7 preferred the use of the alveolar expansion technique in which drill was not used. There were statistically significant differences in swellings between these two techniques, (p 0.01). Conclusions: To avoid excessive swelling and pain from over-ambitious cut-ting of soft tissues and drilling of bone, alveolar expansion technique should be considered first in pa-tients with less dense bone.

Ultrasonic piezotome surgery: is it a benefit for our patients and does it extend surgery time? A retrospective comparative study on the removal of 100 impacted mandibular 3rd molars

Aim of the study was to evaluate if there is a constant and significant reduction in traumaticity when mas- sively traumatic oral surgical procedures such as the removal of third molars are conducted with only ul- trasonic surgical devices (Piezotomes) expressed in a reduction of postsurgical pain and swelling on the patient’s side since such clinical experiences by the authors suggested this. Since oral surgeons criticize a higher time consumption for surgeries with Piezoto- mes also the objective time consumption was evalu- ated and compared to the traditional methods. Mate- rial and Methods: 56 female and male patients were selected that already underwent a removal of an im- pacted third mandibular molar on one side with rota- ry instruments by bone destructive burring with a still persisting comparable third mandibular molar on the contralateral side complaining about recur- rent pain episodes and were already documented for pain and swelling before. The ultrasonic surgical re- moval with the Piezotome was conducted with a buc- cal osteotomy of the compacta lateral to the impacted third molar, preservation of the resected compacta in saline solution, removal of the third molar by single or multiple dentotomy and full anatomical restitution of the surgical site with the preserved buccal com- pacta. The swelling was documented by kephalome- try 24/48/72 hours and 1 week post surgery, the pain index by the total consumption of ibuprofen-400 mg—tablets. Lesions of the mandible nerve were documented. Netto surgery time was taken from the first incision to the last suture of the procedure. Re-sults: 6 patients had to be excluded from evaluation due to incomplete post surgical follow up. A signify-cant (***, p > 0.999) decrease in pain and swelling of 50% was detected both for the parameters swelling and pain with Piezotome-surgery. No lesions of the mandible nerve were detected with Piezotome sur- gery whereas surgery with rotary instruments re- sulted in 16% hypesthesia at least up to one week. Although netto surgery time was approximately 50% longer when done with the Piezotome at the begin-ning the time consumption normalized with the growing experience of the surgeons back to the time schedule when surgery was performed with rotary instruments revealing no significant differences (-, p < 0.73). Conclusions: The results of this retrospective study suggest that Piezotome-surgery is superior in atraumaticity and soft-tissue safety compared to tra- ditional procedures with burs and grants the patients significantly less post surgical pain and swelling. Al- though—as it is with all new surgical tools and pro- tocols—surgery time is longer at the beginning when purely working with ultrasonic surgical devices time consumption reduces to normal values after a learn- ing curve.

Prevalence of Distolingual Roots in the Permanent Mandibular Molars in a Chinese Population

Objective: The purpose of this study was to detect the prevalence of distolingual(DL) roots in the permanent mandibular molars in a Chinese population by using cone-beam computed tomography(CBCT).Methods : A total of 500Chinese patients'CBCT images were examined.The incidences and bilateral concurrence rates of DL roots were determined for the permanent mandibular first,second and third molars.The differences between sexes and sides were tested by using Chi-square tests.The antimeric correlations for occurrence of the trait were analyzed with the Spearman's rank order correlation test.Results : The prevalence of 3-rooted mandibular first molars was 31.98%(134 / 419individuals) calculated by individuals,and 25.89%(217 / 838teeth) calculated by teeth.The bilateral concurrence rate was 61.94%.A significant right-side predilection was found in the female group(P=0.025) as well as for both sexes combined(P=0.009).The Spearman's correlations coefficient between antimeres was 0.77(P=0.000).The prevalence of DL roots in the mandibular second and third molars were 2.02%(8 / 396individuals) and 12.10%(19 / 157individuals),respectively.The corresponding bilateral concurrence rate was 12.50% and 35.83%,and the bilateral correlation coefficient was 0.22(P=0.000) and 0.50(P=0.000),respectively.Conclusion : Clinicians should be aware of the high prevalence of the DL roots in the Chinese population.Understanding the pattern of occurrence would be useful for dental treatment.

The influence of the eruption of mandibular third molars on the craniofacial morphology in Han youth of North China

Teeth affect not only oral problems but also facial morphology.In China,there are few reports about the influence of the third molars on the craniofacial morphology of Han youths.Using in vivo imaging software,3D reconstruction of craniofacial CTs were performed on 32 Chinese Han youths without mandibular third molars and 25 Chinese Han youth with full mandibular third molars.The morphology of their mandible and mandibular tissue was measured to identify differences.Among the morphological characteristics of hard tissues,except for∠ANB,people with a full eruption of the mandibular third molars had statistically significantly larger angle indicators than people without the eruption of the third molars.The soft tissue indicators also showed statistically significant discrepancies in terms of morphological facial height,mouth to gnathion distance,lip height,and mouth breadth.The most influential index for mandibular third molars was length of symphysis,followed by the four indicators of soft tissue and mandible length and height.Morphology facial height,mouth to gnathion distance,lip height,and height of symphysis were moderately correlated.The experimental results show that among Han youth in North China,the third molar eruption has a widespread influence on mandibular morphology,especially in angle,length,and height indicators.It also has a certain influence on maxillofacial soft tissue morphology.These results can be applied to future clinical risk assessment of the wisdom teeth and forensic personal identification of the cranial and maxillofacial region.

不同垂直骨面型下颌第一磨牙横向位置差异的CBCT研究

目的:使用锥形束CT(cone beam CT,CBCT)测量不同垂直骨面型下颌第一磨牙生理牙槽骨厚度,评估横向磨牙位置。方法:选取2023年1~10月在合肥市口腔医院正畸二科就诊患者50例,分为高角组、均角组及低角组,术前拍摄CBCT,数据导入配套三维软件进行4个部位不同深度牙槽骨厚度的测量分析。结果:高角患者下颌第一磨牙的骨厚度最小。下颌第一磨牙舌侧骨厚度高于颊侧。下颌第一磨牙釉牙骨质界根方4 mm处近中舌侧牙槽骨厚度高于远中舌侧,近中颊侧牙槽骨厚度与远中颊侧比较差异无统计学意义。下颌第一磨牙釉牙骨质界根方8 mm处远中颊侧牙槽骨厚度高于近中颊侧,近中舌侧的牙槽骨厚度与远中舌侧比较差异无统计学意义。下颌第一磨牙同一测量位点釉牙骨质界根方8 mm的牙槽骨厚度高于根方4 mm的牙槽骨厚度。结论:不同的垂直骨面型、测量部位、测量深度、牙齿解剖形态都会反映出下颌第一磨牙在牙槽骨中横向位置的差异。

重度牙周破坏对下颌第一磨牙拔牙后种植手术方式影响的回顾性研究

目的:对下颌第一磨牙拔除后行种植修复的病例进行回顾性研究,探索重度牙周破坏(advanced periodontal defect,APD)对拔牙后种植手术方式的影响。方法:纳入下颌第一磨牙拔除后自然愈合3~12个月行种植手术的患者176例,共179个种植位点,进行回顾性分析,记录患者年龄、性别、缺牙时间以及拔牙时是否有APD。采用多因素Logistic回归,分析拔牙前APD是否是种植时行引导性骨再生(guided bone regeneration,GBR)的风险因素。结果:对年龄、性别、缺牙时间等因素校正后,结果显示,有APD的下颌第一磨牙,种植时行GBR的风险是无APD位点的4.738倍(95%可信区间:1.650~13.609,P<0.05)。结论:APD的下颌第一磨牙拔除后,种植手术时行GBR的可能性更大。

北京地区人群下颌第一磨牙远中根分叉形态的锥形束CT研究

目的通过对锥形束CT(CBCT)图像进行回顾性研究,探究北京地区人群下颌第一磨牙独立远中舌根的发生率以及远中根分叉区的形态特征,为牙周诊疗提供依据。方法选取有双侧下颌第一磨牙存在的CBCT资料共401例,记录患者性别、是否存在独立远中舌根,统计其发生率。在存在远中根分叉的下颌第一磨牙CBCT图像中,测量并记录远中根分叉的根柱长度、远中根分叉开口的位置以及远中根分叉开口的角度。结果在401例CBCT图像资料中,下颌第一磨牙独立远中舌根的发生率在个体水平为33.2%,牙水平为26.8%。不同性别发生率无差异,右侧发生率更高。远中根柱长度为4.15 mm±1.02 mm,位置均偏舌侧,远中根分叉开口的角度为65.56°±11.56°,97.2%的远中根分叉开口较颊舌侧根分叉开口更偏根方。结论北京地区人群有较高的下颌第一磨牙远中舌根的发生率。下颌第一磨牙的远中根柱较颊舌侧根柱更长,根分叉开口位置偏舌侧,分叉角度较大。了解远中根分叉的形态有利于临床医师制定完善的诊疗方案。

显微超声技术探查下颌第一恒磨牙近中中根管和远中中根管及其相关影响因素的回顾分析

目的:评估牙科手术显微镜(DOM)结合超声根管治疗仪探查下颌第一恒磨牙额外根管即近中中根管(MMC)和远中中根管(MDC)的有效性及其相关影响因素。方法:回顾2021年06月至2024年06月进行根管治疗的166例患者175个下颌第一恒磨牙,均利用显微镜观察结合超声清理,探查并疏通根管。记录患者的性别、年龄、牙位,并进行统计学分析。结果:额外根管(MMC/MDC)总的发现率为17.14%,其中25个患牙发现MMC(14.29%),5个患牙探查到MDC(2.86%),MMC发生率高于MDC(P<0.001)。各年龄组间MDC/MMC的检出率无统计学差异(P>0.05);MMC/MDC与性别无明显相关性;同时左右两侧分布无明显差异(P>0.05)。结论:DOM和超声根管治疗仪的联合应用有助于牙科医生探查和疏通额外根管(MMC/MDC),有利于控制根管系统内感染,进一步提高治疗成功率。

Nolla分期对青少年拔牙正畸患者下颌第三磨牙倾斜角的影响

目的探讨Nolla分期对青少年拔牙正畸患者下颌第三磨牙倾斜角的影响。方法选择2018年10月—2022年10月收治的100例拔牙正畸青少年患者。100例患者均拔除了4颗前磨牙,共有100颗下颌第三磨牙,通过Nolla分期,可将100例患者分成四组,每组25例。Ⅰ组:牙冠正在形成,Ⅱ组:牙冠基本形成,Ⅲ组:牙根形成在1/2以下,Ⅳ组:牙根形成在1/2以上。在治疗前后,测量下颌第三磨牙倾斜角,对角度α的变化进行分析。结果第三磨牙牙胚倾斜角、MP-SN、MP-FH在不同组间比较差异无统计学意义(F=0.256,P=0.857;F=0.033,P=0.992;F=0.028,P=0.994);治疗前组间下颌第三磨牙角度比较差异无统计学意义(P>0.05),治疗后不同组间下颌第三磨牙角比较差异有统计学意义(F=13.376,P<0.001),治疗前后Ⅰ组、Ⅱ组、Ⅳ组第三磨牙的角度无差异(t=0.757,P=0.453;t=0.224,P=0.824;t=0.852,P=0.399),Ⅲ组治疗后角度变化减少(t=3.697,P<0.001)。结论青少年正畸拔牙后,下颌第三磨牙处于牙根形成阶段的一半以下可能会导致第三磨牙近中倾斜加重。当下颌第三磨牙处于牙冠形成阶段,牙冠形成超过一半时,第三磨牙角度变化较小。在治疗前应根据Nolla分期评估下颌第三磨牙的预后情况,并及时制定相应的干预策略。