Psidium guajava (guava) leaf is a phytotherapic used in folk medicine to treat gastrointestinal and respiratory dis-turbances and is used as anti-inflammatory medicine. In nuclear medicine, blood constituents (BC) are...Psidium guajava (guava) leaf is a phytotherapic used in folk medicine to treat gastrointestinal and respiratory dis-turbances and is used as anti-inflammatory medicine. In nuclear medicine, blood constituents (BC) are labelled with techne-tium-99m (99mTc) and used to image procedures. However, data have demonstrated that synthetic or natural drugs could modify the labelling of BC with 99mTc. The aim of this work was to evaluate the effects of aqueous extract of guava leaves on the labelling of BC with 99mTc. Blood samples of Wistar rats were incubated with different concentrations of guava extract and labelled with 99mTc after the percentage of incorporated radioactivity (%ATI) in BC was determined. The results suggest that aqueous guava extract could present antioxidant action and/or alters the membrane structures involved in ion transport into cells, thus decreasing the radiolabelling of BC with 99mTc. The data showed significant (P<0.05) alteration of ATI in BC from blood incubated with guava extract.展开更多
800 MPa grade new ultra-low carbon bainitic （NULCB） steel is the recently developed new generation steel. The microstructure in the coarse-grained heat affected zone （CGHAZ） of NULCB steel under laser welding cond...800 MPa grade new ultra-low carbon bainitic （NULCB） steel is the recently developed new generation steel. The microstructure in the coarse-grained heat affected zone （CGHAZ） of NULCB steel under laser welding conditions was investigated by thermal simulation. The influence of the cooling time from 800℃ to 500℃.t8/5 （0.3-30 s）, on the microstructure of the CGHAZ was discussed. The experimental results indicate that the microstructnre of the CGHAZ is only the granular bainite which consists of bainitic ferrite （BF） lath and M-A constituent while t8/5 is 0.3-30 s. The M-A constituent consists of twinned martensite and residual austenite, and the change of the volume fraction of the residual austenite in the M-A constituent is very small when t8/5 is between 0.3 and 30 s. The morphology of the M-A constituent obviously changes with the variation of t8/5.As t8/5 increases, tile average width, gross and shape parameter of the M-A constituent increase, while the line density of the M-A constituent decreases.展开更多
Microstructure evolution and impact toughness of simulated heat affected zone（HAZ） in low carbon steel have been investigated in this study. Thermal simulator was used to simulate microstructure evolution in HAZ wit...Microstructure evolution and impact toughness of simulated heat affected zone（HAZ） in low carbon steel have been investigated in this study. Thermal simulator was used to simulate microstructure evolution in HAZ with heat input of 10-100 kJ/cm welding thermal cycle. Results indicated that microstructure of HAZ mainly consisted of acicular ferrite（AF） inside grain and high volume fraction of grain boundaries ferrite（GBF） at prior austenite boundaries; the size of GBF and effective grain size increased with increasing heat input. Excellent impact toughness（more than 150 J at-40 ℃） was obtained in HAZ with heat input less than 50 k J/cm. When heat input was 100 kJ/cm, the impact toughness of HAZ decreased to 18 J because of the presence of large M-A constituent with lath-form in HAZ, assisting the micro-crack initiation and decreasing the crack initiation energy seriously. Effect of inclusions on acicular ferrite transformation in HAZ was also discussed.展开更多
This paper reports the quantitative study of martensite/austenite(M/A)constituents in high-grade heavy steel plates using the gradient-based watershed algorithm.Compared with several other image segmentation algorithm...This paper reports the quantitative study of martensite/austenite(M/A)constituents in high-grade heavy steel plates using the gradient-based watershed algorithm.Compared with several other image segmentation algorithms,the gradient-based watershed algorithm can effectively remove noises in images with various qualities and identify M/A constituents.The results prove that the gradient-based watershed algorithm is an effective method that can be used to digitize microstructures and integrate the data into Process Intelligent Data Application System(PIDAS).展开更多
The cleavage fracture mechanism of granular bainitie weld metal in 15MnVN steel has been investigated.SEM observation of a special specimen for revealing simultaneously fracture sur- face and microstructure shows that...The cleavage fracture mechanism of granular bainitie weld metal in 15MnVN steel has been investigated.SEM observation of a special specimen for revealing simultaneously fracture sur- face and microstructure shows that the cleavage of the weld is initiated by M-A constituent. The 95th percentile equivalent diameter of M-A constituent controls the cleavage fracture stress of the weld metal.展开更多
基金Project supported by CAPES, CNPq and FAPERJ, Brazil
文摘Psidium guajava (guava) leaf is a phytotherapic used in folk medicine to treat gastrointestinal and respiratory dis-turbances and is used as anti-inflammatory medicine. In nuclear medicine, blood constituents (BC) are labelled with techne-tium-99m (99mTc) and used to image procedures. However, data have demonstrated that synthetic or natural drugs could modify the labelling of BC with 99mTc. The aim of this work was to evaluate the effects of aqueous extract of guava leaves on the labelling of BC with 99mTc. Blood samples of Wistar rats were incubated with different concentrations of guava extract and labelled with 99mTc after the percentage of incorporated radioactivity (%ATI) in BC was determined. The results suggest that aqueous guava extract could present antioxidant action and/or alters the membrane structures involved in ion transport into cells, thus decreasing the radiolabelling of BC with 99mTc. The data showed significant (P<0.05) alteration of ATI in BC from blood incubated with guava extract.
文摘800 MPa grade new ultra-low carbon bainitic （NULCB） steel is the recently developed new generation steel. The microstructure in the coarse-grained heat affected zone （CGHAZ） of NULCB steel under laser welding conditions was investigated by thermal simulation. The influence of the cooling time from 800℃ to 500℃.t8/5 （0.3-30 s）, on the microstructure of the CGHAZ was discussed. The experimental results indicate that the microstructnre of the CGHAZ is only the granular bainite which consists of bainitic ferrite （BF） lath and M-A constituent while t8/5 is 0.3-30 s. The M-A constituent consists of twinned martensite and residual austenite, and the change of the volume fraction of the residual austenite in the M-A constituent is very small when t8/5 is between 0.3 and 30 s. The morphology of the M-A constituent obviously changes with the variation of t8/5.As t8/5 increases, tile average width, gross and shape parameter of the M-A constituent increase, while the line density of the M-A constituent decreases.
基金Funded by Doctoral Scientific Research Foundation of Liao Ning Province(No.201601167)
文摘Microstructure evolution and impact toughness of simulated heat affected zone（HAZ） in low carbon steel have been investigated in this study. Thermal simulator was used to simulate microstructure evolution in HAZ with heat input of 10-100 kJ/cm welding thermal cycle. Results indicated that microstructure of HAZ mainly consisted of acicular ferrite（AF） inside grain and high volume fraction of grain boundaries ferrite（GBF） at prior austenite boundaries; the size of GBF and effective grain size increased with increasing heat input. Excellent impact toughness（more than 150 J at-40 ℃） was obtained in HAZ with heat input less than 50 k J/cm. When heat input was 100 kJ/cm, the impact toughness of HAZ decreased to 18 J because of the presence of large M-A constituent with lath-form in HAZ, assisting the micro-crack initiation and decreasing the crack initiation energy seriously. Effect of inclusions on acicular ferrite transformation in HAZ was also discussed.
文摘This paper reports the quantitative study of martensite/austenite(M/A)constituents in high-grade heavy steel plates using the gradient-based watershed algorithm.Compared with several other image segmentation algorithms,the gradient-based watershed algorithm can effectively remove noises in images with various qualities and identify M/A constituents.The results prove that the gradient-based watershed algorithm is an effective method that can be used to digitize microstructures and integrate the data into Process Intelligent Data Application System(PIDAS).
文摘The cleavage fracture mechanism of granular bainitie weld metal in 15MnVN steel has been investigated.SEM observation of a special specimen for revealing simultaneously fracture sur- face and microstructure shows that the cleavage of the weld is initiated by M-A constituent. The 95th percentile equivalent diameter of M-A constituent controls the cleavage fracture stress of the weld metal.
