The prediction of the multiscale flow in the Knudsen pump is important for understanding its pumping mechanism.However,there is little research on such interesting multiscale phenomenon in the Knudsen pumps.In this pa...The prediction of the multiscale flow in the Knudsen pump is important for understanding its pumping mechanism.However,there is little research on such interesting multiscale phenomenon in the Knudsen pumps.In this paper,a novel numerical analysis method combining the direct simulation Monte Carlo（DSMC） method with the smoothed particle hydrodynamics（SPH） method is presented for simulating the multiscale flow,which is often encountered in the application of the Knudsen pumps.Validity and accuracy of the new method are given by comparing its results with that of the previous research.Using the coupled multiscale approach,the rarefaction and the temperature drive are studied,which are two main factors on the performance of the Knudsen pumps.To investigate the effect of rarefaction on the performance of the Knudsen pump,various pump operation pressures are compared.The flow characteristics and pumping ability at different rarefaction are analyzed,and the phenomenon of the multiscale flow is also discussed.Several cases with different linear or nonlinear temperature gradients are set to investigate the effect of temperature gradient on the performance of the Knudsen pump.The flow characteristics of the Knudsen pump such as the velocity,pressure increase,and the mass flowrate are presented.A unique phenomenon,the reverse transpiration effect caused by the nonlinear temperature gradient is studied,and the reason of the significant pressure increase in the pump channel is also analyzed.Since the multiscale gas flow is widely encountered in the microflow systems,the above method and its results can also be greatly beneficial and provide significant insights for the design of the MEMS devices.展开更多
Temperature and freeze-thaw events are two key factors controlling litter decomposition in cold biomes.Predicted global warming and changes in freeze-thaw cycles therefore may directly or indirectly impact litter deco...Temperature and freeze-thaw events are two key factors controlling litter decomposition in cold biomes.Predicted global warming and changes in freeze-thaw cycles therefore may directly or indirectly impact litter decomposition in those ecosystems. Here, we conducted a2-year-long litter decomposition experiment along an elevational gradient from 3000 to 3600 m to determine the potential effects of litter quality, climate warming and freeze-thaw on the mass losses of three litter types [dragon spruce（Picea asperata Mast.）, red birch（Betula albosinensis Burk.）, and minjiang fir（Abies faxoniana Rehd. et Wild）]. Marked differences in mass loss were observed among the litter types and sampling dates. Decay constant（k） values of red birch were significantly higher than those of the needle litters. However, mass losses between elevations did not differ significantly for any litter type.During the winter, lost mass contributed 18.3-28.8 % of the net loss rates of the first year. Statistical analysis showed that the relationships between mass loss and litter chemistry or their ratios varied with decomposition periods. Our results indicated that short-term field incubations could overestimate the k value of litter decomposition.Considerable mass was lost from subalpine forest litters during the wintertime. Potential future warming may not affect the litter decomposition in the subalpine forest ecosystems of eastern Tibetan Plateau.展开更多
The finite element software,MIDAS is used to predict the distribution of temperatures and,analyzes the cracking control methods within a hydrating mass concrete.The temperature control of mass concrete has great signi...The finite element software,MIDAS is used to predict the distribution of temperatures and,analyzes the cracking control methods within a hydrating mass concrete.The temperature control of mass concrete has great significance in assuring the project quality.Adiabatic or semi adiabatic temperature measurement is mostly used for measuring and controlling the temperature fluctuation during construction.The temperature distribution produced by the finite element thermal analysis of the model is used to quantify the maximum allowable internal temperature difference before crack initiation on concrete.This study analyzes the data from one high-rise structure project in Shanghai are used to verify the finite element model developed.Results suggest that reliance on a limiting maximum temperature differential to control cracking in massive concrete applications should be supplemented with a requirement for analysis showing the calculated spatial temperature and stress response to the predicted temperature distribution within the concrete,to ensure that the induced tensile stresses will not exceed the tensile strength of the concrete and so minimize the risk of having thermal cracks at early age.展开更多
A new method of 2-amino-4-nitrophenol and 2-amino-5-nitrophenol in hair dye determined by liquid chromatography-mass spectrometry.Chromatographic separation was carried out on a Atlantis C18 (2.1 mm i.d.×150 mm,5...A new method of 2-amino-4-nitrophenol and 2-amino-5-nitrophenol in hair dye determined by liquid chromatography-mass spectrometry.Chromatographic separation was carried out on a Atlantis C18 (2.1 mm i.d.×150 mm,5 μm)column with gradient elution with methanol-acetonitrile at a flow rate 0.2 mL/min.The mass spectrometry was operated in the positive electrospray ionization mode.Quantity was performed using multiple reaction monitoring of the product ion transitions m/z153.0>m/z106(17eV) for 2-amino-4-nitrophenol and m/z153.0>m/z122(15eV) for 2-amino-5-nitrophenol.Linearity of peak was obtained over a range of concentration is from 0.2 to 100 mg/L.The limit is 0.2 mg/L of the method.The proposed method was accurate and rapid with wide linear range.The repeatability and the reproducibility of the method were excellent.It has been applied to detect the real with satisfactory results.展开更多
基金supported by National Hi-tech Research and Development Program of China (863 Program,Grant Nos.2009AA05Z118,2009AA044801)National Natural Science Foundation of China (Grant Nos. 50475100,51106137)+2 种基金China Postdoctoral Science Foundation (Grant No. 2010047172)Zhejiang Provincial Natural Science Foundation of China (Grant No. Z1100221)Fundamental Research Funds for the Central Universities of China (Grant No. 2009QNA4031)
文摘The prediction of the multiscale flow in the Knudsen pump is important for understanding its pumping mechanism.However,there is little research on such interesting multiscale phenomenon in the Knudsen pumps.In this paper,a novel numerical analysis method combining the direct simulation Monte Carlo（DSMC） method with the smoothed particle hydrodynamics（SPH） method is presented for simulating the multiscale flow,which is often encountered in the application of the Knudsen pumps.Validity and accuracy of the new method are given by comparing its results with that of the previous research.Using the coupled multiscale approach,the rarefaction and the temperature drive are studied,which are two main factors on the performance of the Knudsen pumps.To investigate the effect of rarefaction on the performance of the Knudsen pump,various pump operation pressures are compared.The flow characteristics and pumping ability at different rarefaction are analyzed,and the phenomenon of the multiscale flow is also discussed.Several cases with different linear or nonlinear temperature gradients are set to investigate the effect of temperature gradient on the performance of the Knudsen pump.The flow characteristics of the Knudsen pump such as the velocity,pressure increase,and the mass flowrate are presented.A unique phenomenon,the reverse transpiration effect caused by the nonlinear temperature gradient is studied,and the reason of the significant pressure increase in the pump channel is also analyzed.Since the multiscale gas flow is widely encountered in the microflow systems,the above method and its results can also be greatly beneficial and provide significant insights for the design of the MEMS devices.
基金supported by the National Natural Science Foundation of China(3157044531570601+2 种基金31500509 and31570605)Postdoctoral Science Foundation of China(2013M540714 and 2014T70880)Collaborative Innovation Center of Ecological Security in the Upper Reaches of Yangze River
文摘Temperature and freeze-thaw events are two key factors controlling litter decomposition in cold biomes.Predicted global warming and changes in freeze-thaw cycles therefore may directly or indirectly impact litter decomposition in those ecosystems. Here, we conducted a2-year-long litter decomposition experiment along an elevational gradient from 3000 to 3600 m to determine the potential effects of litter quality, climate warming and freeze-thaw on the mass losses of three litter types [dragon spruce（Picea asperata Mast.）, red birch（Betula albosinensis Burk.）, and minjiang fir（Abies faxoniana Rehd. et Wild）]. Marked differences in mass loss were observed among the litter types and sampling dates. Decay constant（k） values of red birch were significantly higher than those of the needle litters. However, mass losses between elevations did not differ significantly for any litter type.During the winter, lost mass contributed 18.3-28.8 % of the net loss rates of the first year. Statistical analysis showed that the relationships between mass loss and litter chemistry or their ratios varied with decomposition periods. Our results indicated that short-term field incubations could overestimate the k value of litter decomposition.Considerable mass was lost from subalpine forest litters during the wintertime. Potential future warming may not affect the litter decomposition in the subalpine forest ecosystems of eastern Tibetan Plateau.
文摘The finite element software,MIDAS is used to predict the distribution of temperatures and,analyzes the cracking control methods within a hydrating mass concrete.The temperature control of mass concrete has great significance in assuring the project quality.Adiabatic or semi adiabatic temperature measurement is mostly used for measuring and controlling the temperature fluctuation during construction.The temperature distribution produced by the finite element thermal analysis of the model is used to quantify the maximum allowable internal temperature difference before crack initiation on concrete.This study analyzes the data from one high-rise structure project in Shanghai are used to verify the finite element model developed.Results suggest that reliance on a limiting maximum temperature differential to control cracking in massive concrete applications should be supplemented with a requirement for analysis showing the calculated spatial temperature and stress response to the predicted temperature distribution within the concrete,to ensure that the induced tensile stresses will not exceed the tensile strength of the concrete and so minimize the risk of having thermal cracks at early age.
文摘A new method of 2-amino-4-nitrophenol and 2-amino-5-nitrophenol in hair dye determined by liquid chromatography-mass spectrometry.Chromatographic separation was carried out on a Atlantis C18 (2.1 mm i.d.×150 mm,5 μm)column with gradient elution with methanol-acetonitrile at a flow rate 0.2 mL/min.The mass spectrometry was operated in the positive electrospray ionization mode.Quantity was performed using multiple reaction monitoring of the product ion transitions m/z153.0>m/z106(17eV) for 2-amino-4-nitrophenol and m/z153.0>m/z122(15eV) for 2-amino-5-nitrophenol.Linearity of peak was obtained over a range of concentration is from 0.2 to 100 mg/L.The limit is 0.2 mg/L of the method.The proposed method was accurate and rapid with wide linear range.The repeatability and the reproducibility of the method were excellent.It has been applied to detect the real with satisfactory results.
