Aiming at the problem of reverse-design of mechanism, a method based on the matching of trajectory code-chains is presented. The motion trajectory of mechanism is described with code-chain, which is normalized to simp...Aiming at the problem of reverse-design of mechanism, a method based on the matching of trajectory code-chains is presented. The motion trajectory of mechanism is described with code-chain, which is normalized to simplify the operation of geometric transformation. The geometric transforma-tion formulas of scale, mirror and rotation for trajectory code-chain are defined, and the reverse de-sign for mechanism trajectory is realized through the analysis and solution of similarity matching between the desired trajectory and the predefined trajectory. The algorithm program and prototype system of reverse design for mechanism trajectory are developed. Application samples show that the method can break the restriction of trajectory patterns in matching, meet the demand of partial match-ing, and overcome the influence of geometric transformation of trajectory on the reverse design for mechanism.展开更多
In aircraft structural dynamic design the matching of guns with their supportingstructure is one of the most important tasks on which hinges the success or failure of thestructural design.The design curves for matchin...In aircraft structural dynamic design the matching of guns with their supportingstructure is one of the most important tasks on which hinges the success or failure of thestructural design.The design curves for matching guns with their supporting structure can be obtained fromresponse calculations of the plate-spring system supporting the gun on the ground,the modelstructure tested on the ground and the actual structure.A set of matching curves is given forengineering application.Then,the matching design can be accomplished by means of impactload spectrograms so as to perform an optimal structural design and to make further improvementson dynamic design program.展开更多
Background: Binary as well as polytomous logistic models are widely used for estimating odds ratios when the exposure of prime interest assumes unordered multiple levels under matched pairs case-control design. In our...Background: Binary as well as polytomous logistic models are widely used for estimating odds ratios when the exposure of prime interest assumes unordered multiple levels under matched pairs case-control design. In our previous studies, we have shown that the use of a polytomous logistic model for estimating cumulative odds ratios when the outcome (response) variable is ordinal (in addition to being polytomous) under matched pairs case-control design. The cumulative odds ratios were estimated based on separate fitting of the model at each of the cutpoint level as compared to less than equal to that level. In this paper we propose an alternative method of estimating the cumulative odds ratios and reanalyze the Los Angeles Endometrial Cancer data in the context of dose levels of conjugated oestrogen exposure and development of endometrial cancer under the matched pair case-control design. Methods: In the present study, the cumulative logit model is fitted using a single multinomial logit model for the data. For this, the full maximum likelihood estimation procedure is adopted. A test for equality of the cumulative odds ratios across the exposure levels is proposed. Results: The analysis revealed that there is a strong evidence of risk for developing endometrial cancer due to oestrogen exposure above each of the three dose level as compared to less than equal to that level. The estimated values at the three cutpoint levels were found to be 6.17, 3.60 and 5.16 respectively. Conclusions: The odds of developing endometrial cancer are very high for the users of any amount of oestrogen, even if it is the least dose, as compared to the non-users.展开更多
To improve the bending load-carrying capacity （ BLCC） of under-matched butt joint under four-point bending load in the elastic stage, the shape design of the reinforcement is studied based on the theoretics of mecha...To improve the bending load-carrying capacity （ BLCC） of under-matched butt joint under four-point bending load in the elastic stage, the shape design of the reinforcement is studied based on the theoretics of mechanics of materials. The concept, criterion, realization condition and design proposal of equal bending load-carrying capacity （EBLCC） are put forward. The theoretical analysis results have been verified by the finite element method. The simulation results are coincident basically with the ones of theoretical analysis. The research results show that the shape design of the reinforcement of EBLCC can improve BLCC of under-matched butt joint and the unilateral-side type reinforcement can replace double-side symmetry展开更多
基金This project is supported by National Hi-tech Research and Development Program of China (863 Program, No. 2006AA04Z114)Research Fund for the Doctoral Program of Higher Education, China (No. 20040335060)Provincial Scientific Personnel Educational Foundation of Zhejiang, China (No. R603240).
文摘Aiming at the problem of reverse-design of mechanism, a method based on the matching of trajectory code-chains is presented. The motion trajectory of mechanism is described with code-chain, which is normalized to simplify the operation of geometric transformation. The geometric transforma-tion formulas of scale, mirror and rotation for trajectory code-chain are defined, and the reverse de-sign for mechanism trajectory is realized through the analysis and solution of similarity matching between the desired trajectory and the predefined trajectory. The algorithm program and prototype system of reverse design for mechanism trajectory are developed. Application samples show that the method can break the restriction of trajectory patterns in matching, meet the demand of partial match-ing, and overcome the influence of geometric transformation of trajectory on the reverse design for mechanism.
文摘In aircraft structural dynamic design the matching of guns with their supportingstructure is one of the most important tasks on which hinges the success or failure of thestructural design.The design curves for matching guns with their supporting structure can be obtained fromresponse calculations of the plate-spring system supporting the gun on the ground,the modelstructure tested on the ground and the actual structure.A set of matching curves is given forengineering application.Then,the matching design can be accomplished by means of impactload spectrograms so as to perform an optimal structural design and to make further improvementson dynamic design program.
文摘Background: Binary as well as polytomous logistic models are widely used for estimating odds ratios when the exposure of prime interest assumes unordered multiple levels under matched pairs case-control design. In our previous studies, we have shown that the use of a polytomous logistic model for estimating cumulative odds ratios when the outcome (response) variable is ordinal (in addition to being polytomous) under matched pairs case-control design. The cumulative odds ratios were estimated based on separate fitting of the model at each of the cutpoint level as compared to less than equal to that level. In this paper we propose an alternative method of estimating the cumulative odds ratios and reanalyze the Los Angeles Endometrial Cancer data in the context of dose levels of conjugated oestrogen exposure and development of endometrial cancer under the matched pair case-control design. Methods: In the present study, the cumulative logit model is fitted using a single multinomial logit model for the data. For this, the full maximum likelihood estimation procedure is adopted. A test for equality of the cumulative odds ratios across the exposure levels is proposed. Results: The analysis revealed that there is a strong evidence of risk for developing endometrial cancer due to oestrogen exposure above each of the three dose level as compared to less than equal to that level. The estimated values at the three cutpoint levels were found to be 6.17, 3.60 and 5.16 respectively. Conclusions: The odds of developing endometrial cancer are very high for the users of any amount of oestrogen, even if it is the least dose, as compared to the non-users.
文摘To improve the bending load-carrying capacity （ BLCC） of under-matched butt joint under four-point bending load in the elastic stage, the shape design of the reinforcement is studied based on the theoretics of mechanics of materials. The concept, criterion, realization condition and design proposal of equal bending load-carrying capacity （EBLCC） are put forward. The theoretical analysis results have been verified by the finite element method. The simulation results are coincident basically with the ones of theoretical analysis. The research results show that the shape design of the reinforcement of EBLCC can improve BLCC of under-matched butt joint and the unilateral-side type reinforcement can replace double-side symmetry
