Toward high-efficiency perovskite solar cells with one-dimensional oriented nanostructured electron transport materials

The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.

Review of current progress in hole-transporting materials for perovskite solar cells

Recent advancements in perovskites’ application as a solar energy harvester have been astonishing. The power conversion efficiency(PCE) of perovskite solar cells(PSCs) is currently reaching parity(>25 percent), an accomplishment attained over past decades. PSCs are seen as perovskites sandwiched between an electron transporting material(ETM) and a hole transporting material(HTM). As a primary component of PSCs, HTM has been shown to have a considerable effect on solar energy harvesting, carrier extraction and transport, crystallization of perovskite, stability, and price. In PSCs, it is still necessary to use a HTM.While perovskites are capable of conducting holes, they are present in trace amounts, necessitating the use of an HTM layer for efficient charge extraction. In this review, we provide an understanding of the significant forms of HTM accessible(inorganic, polymeric and small molecule-based HTMs), to motivate further research and development of such materials. The identification of additional criteria suggests a significant challenge to high stability and affordability in PSC.

Recent advances of Cu-based hole transport materials and their interface engineering concerning different processing methods in perovskite solar cells

In recent years, perovskite solar cells (PSCs) have become a much charming photovoltaic technology and have triggered enormous studies worldwide, owing to their high efficiency, low cost and ease of preparation. The power conversion efficiency has rapidly increased by more than 6 times to the current 25.5% in the past decade. Hole transport materials (HTMs) are an indispensable part of PSCs, which great affect the efficiency, the cost and the stability of PSCs. Inorganic Cu-based p-type semiconductors are a kind of representative inorganic HTMs in PSCs due to their unique advantages of rich variety, low cost, excellent hole mobility, adjustable energy levels, good stability, low temperature and scalable processing ability. In this review, the research progress in new materials and the control of photoelectric properties of Cu-based inorganic HTMs were first summarized systematically. And then, concerning different processing methods, advances of the interface engineering of Cu-based hole transport layers (HTLs) in PSCs were detailly discussed. Finally, the challenges and future trends of Cu-based inorganic HTMs and their interface engineering in PSCs were analyzed.

Improving the performance of arylamine-based hole transporting materials in perovskite solar cells： Extending π-conjugation length or increasing the number of side groups？

In this work, we prepared three simple arylamine-based hole transporting materials from commercially available starting materials. The effect of extending z-conjugation length or increasing the number of side groups compared with reference compound on the photophysical, electrochemical, hole mobility properties and performance in perovskite solar cells were further studied. It is noted that these two kinds of molecular modifications can significantly lower the HOMO level and improve the hole mobility, thus improving the hole injection from valence band of perovskite. On the other hand, the compound with more side groups showed higher hole injection efficiency due to lower HOMO level and higher hole mo- bility compared with the compound with extending π-conjugation length. The perovskite solar cells with the modified molecules as hole transporting materials showed a higher efficiency of 15.40% and 16.95%, respectively, which is better than that of the reference compound （13.18%）. Moreover, the compound with increasing number of side groups based devices showed comparable photovoltaic performance with that of conventional spiro-OMeTAD （16.87%）.

Diketopyrrolopyrrole based D-π-A-π-D type small organic molecules as hole transporting materials for perovskite solar cells

Three novel diketopyrrolopyrrole （DPP） based small organic molecules were synthesized as hole transporting materials for perovskite solar cells. The effects of different donors and zr bridges on the performance of perovskite solar cells （PSCs） were discussed. The efficiency of TPADPP-1, TPADPP-2. PTZDPP-2 was 5.10%, 9.85% and 8.16% respectively. Compared to TPADPP-2, the voltage of PTZDPP-2 was higher. Because the electron-donatingability of phenothiazine based donor was larger than that of triphenylamine based donor, the HOMO level of PTZDPP-2 was lower than that of TPADPP-2. The results indicated that the diketopyrrolopyrrole based D-π-A-π-D type small organic molecule might be a promising hole trans- porting material in the perovskite solar cells.

Non-conjugated polymers as thickness-insensitive electron transport materials in high-performance inverted organic solar cells

Two non-conjugated polymers PEIE-DBO and PEIE-DCO, prepared by quaternization of polyethyleneimine ethoxylate by 1,8-dibromooctane and 1,8-dichlorooctane respectively, are developed as electron transport layer(ETL) in high-performance inverted organic solar cells(OSCs), and the effects of halide ions on polymeric photoelectric performance are fully investigated. PEIE-DBO possesses higher electron mobility(3.68×10-4 cm2 V-1s-1), higher conductivity and more efficient exciton dissociation and electron extraction, attributed to its lower work function(3.94 eV) than that of PEIE-DCO, which results in better photovoltaic performance in OSCs. The inverted OSCs with PTB7-Th: PC71BM as photoactive layer and PEIE-DBO as ETL exhibit higher PCE of 10.52%, 9.45% and 9.09% at the thickness of 9, 35 and 50 nm,respectively. To our knowledge, PEIE-DBO possesses the best thickness-insensitive performance in polymeric ETLs of inverted fullerene-based OSCs. Furthermore, PEIE-DBO was used to fabricate the inverted non-fullerene OSCs(PM6:Y6) and obtained a high PCE of 15.74%, which indicates that PEIE-DBO is effective both in fullerene-based OSCs and fullerene-free OSCs.

Progress in hole-transporting materials for perovskite solar cells

In recent years the photovoltaic community has witnessed the unprecedented development of perovskite solar cells（PSCs） as they have taken the lead in emergent photovoltaic technologies. The power conversion efficiency of this new class of solar cells has been increased to a point where they are beginning to compete with more established technologies. Although PSCs have evolved a variety of structures, the use of hole-transporting materials（HTMs） remains indispensable. Here, an overview of the various types of available HTMs is presented. This includes organic and inorganic HTMs and is presented alongside recent progress in associated aspects of PSCs, including device architectures and fabrication techniques to produce high-quality perovskite films. The structure, electrochemistry, and physical properties of a variety of HTMs are discussed, highlighting considerations for those designing new HTMs. Finally, an outlook is presented to provide more concrete direction for the development and optimization of HTMs for highefficiency PSCs.

Heat transport in low-dimensional materials: A review and perspective

Heat transport is a key energetic process in materials and devices. The reduced sample size, low dimension of the problem and the rich spectrum of material imperfections introduce fruitful phenomena at nanoscale. In this review, we summarize recent progresses in the understanding of heat transport process in low-dimensional materials, with focus on the roles of defects, disorder, interfaces, and the quantum- mechanical effect. New physics uncovered from computational simulations, experimental studies, and predictable models will be reviewed, followed by a perspective on open challenges.

Heteroatom engineering on spiro-type hole transporting materials for perovskite solar cells

A series of spiro-type hole transporting materials, spiro-OMe TAD, spiro-SMe TAD and spiro-OSMe TAD,with methoxy, methylsulfanyl or half methoxy and half methylsulfanyl terminal groups are designed and prepared. The impact of varied terminal groups on bulk properties, such as photophysical, electrochemical, thermal, hole extraction, and photovoltaic performance in perovskite solar cells is investigated.It is noted that the terminal groups of the hole transporting material with half methoxy and half methylsulfanyl exhibit a better device performance and decreased hysteresis compared with all methoxy or methylsulfanyl counterparts due to better film-forming ability and improved hole extraction capability.Promisingly, the spiro-OSMe TAD also shows comparable performance than high-purity commercial spiro-OMe TAD. Moreover, the highest power conversion efficiency of the optimized device employing spiro-OSMe TAD exceeding 20% has been achieved.

Spatial configuration engineering of perylenediimide-based non-fullerene electron transport materials for efficient inverted perovskite solar cells

Due to their excellent photoelectron chemical properties and suitable energy level alignment with perovskite,perylene diimide(PDI)derivatives are competitive non-fullerene electron transport material(ETM)candidates for perovskite solar cells(PSCs).However,the conjugated rigid plane structure of PDI units result in PDI-based ETMs tending to form large aggregates,limiting their application and photovoltaic performance.In this study,to restrict aggregation and further enhance the photovoltaic performance of PDI-type ETMs,two PDI-based ETMs,termed PDO-PDI2(dimer)and PDO-PDI3(trimer),were constructed by introducing a phenothiazine 5,5-dioxide(PDO)core building block.The research manifests that the optoelectronic properties and film formation property of PDO-PDI2 and PDO-PDI3 were deeply affected by the molecular spatial configuration.Applied in PSCs,PDO-PDI3 with threedimensional spiral molecular structure,exhibits superior electron extraction and transport properties,further achieving the best PCE of 18.72%and maintaining 93%of its initial efficiency after a 720-h aging test under ambient conditions.

C≡N-based carbazole-arylamine hole transporting materials for perovskite solar cells: Substitution position matters

Hole transporting materials(HTMs)containing passivating groups for perovskite materials have attracted much attention for efficient and stable perovskite solar cells(PSCs).Among them,C≡N-based molecules have been proved as efficient HTMs.Herein,a series of novel C≡N functionalized carbazole-arylamine derivatives with variable C≡N substitution positions(para,meta,and ortho)on benzene-carbazole skeleton(on the adjacent benzene of carbazole)were synthesized(p-HTM,m-HTM and o-HTM).The experimental results exhibit that the substitution positions of the Ctriple bondN unit on HTMs have minor difference on the HOMO energy level and hydrophobicity.m-HTM has a relatively lower glass transition temperature compared with that of p-HTM and o-HTM.The functional theory calculations show that the C≡N located on meta position exposed very well,and the exposure direction is also the same with the methoxy.Upon applying these molecules as HTMs in PSCs,their device performance is found to sensitively depend on the substitution position of the C≡N unit on the molecule skeleton.The devices using m-HTM and o-HTM exhibit better performance than that of p-HTM.Moreover,m-HTM-based devices exhibit better light-soaking performance and long-term stability,which could be resulted from better interaction with the perovskite according to DFT results.Moreover,we further prepared a HTM with two C≡N units on the symmetrical meta position of molecular skeleton(2m-HTM).Interestingly,2m-HTM-based devices exhibit relatively inferior performance compared with that of the m-HTM,which could be resulted from weak negative electrical character of C≡N unit on 2m-HTM.The results give some new insights for designing ideal HTM for efficient and stable PSCs.

Anisotropic Transport and Magnetic Properties of Charge-Density-Wave Materials RSeTe2（R=La,Ce,Pr,Nd）

Single crystals of RSeTe2 （R =La, Ce, Pr, Nd） are synthesized using LiC1/RbCI flux. Transport and magnetic properties in the directions parallel and perpendicular to the a-c plane are investigated. We find that the resistivity anisotropy P⊥/P∥ lies in the range 486-615 for different compounds at 2K, indicating the highly two-dimensional character. In both the orientations, the charge-density-wave transitions start near Tcow = 284（3）K, 316（3）K, 359（3）K for NdSeTe2, PrSeTe2, CeSeTe2, respectively, with a considerable increase in dc resistivity. While for LaSeTe2, no obvious resistivity anomaly is observed up to 380K. The value of TCDW increases monotonically with the increasing lattice parameters. Below TCDW, slight anomalies can be observed in NdSeTe2, PrSeTe2 and CeSeTe2 with onset temperature at 193（3）K, 161（3）K, 108（3）K, respectively, decreasing as lattice parameters increase. Magnetic susceptibility measurements show that the valence state of rare earth ions are trivalenee in these compounds. Antiferromagnetie-type magnetic order is formed in CeSeTe2 at 2.1 K, while no magnetic transition is observed in PrSeTe2 and NdSeTe2 down to 1.8 K.

Grain size composition and transport of sedimentary organic carbon in the Changjiang River(Yangtze River) Estuary and Hangzhou Bay and their adjacent waters

Surface sediments from the Changjiang River （Yangtze River） Estuary, Hangzhou Bay, and their adjacent waters were analyzed for their grain size distribution, organic carbon （OC） concentration, and stable carbon isotope composition （δ13C）. Based on this analysis, about 36 surface sediment samples were selected from various environments and separated into sand （〉0.250 ram, 0.125-0.250 ram, 0.063-0.125 mm） and silt （0.025-0.063 mm） fractions by wet-sieving fractionation methods, and further into silt- （0.004-0.025 mm） and clay-sized （〈0.004 mm） fractions by centrifugal fractionation. Sediments of six grain size categories were analyzed for their OC and 613C contents to explore the grain size composition and transport paths of sedimentary OC in the study area. From fine to coarse fractions, the OC content was 1.18%, 0.51%, 0.46%, 0.42%, 0.99%, and 0.48%, respectively, while the δ13C was -21.64‰, -22.03‰, -22.52‰, -22.46‰, -22.36‰, and -22.28%0, respectively. In each size category, the OC contribution was 42.96%, 26.06%, 9.82%, 5.75%, 7.09%, and 8.33%, respectively. The OC content in clay and fine silt fractions （〈0.025 ram） was about 69.02%. High OC concentrations were mainly found in offshore modern sediments in the northeast of the Changjiang River Estuary, in modern sediments in the lower estuary of the Changjiang River and Hangzhou Bay, and in Cyclonic Eddy modern sediments to the southwest of the Cheju Island. Integrating the distribution of terrestrial OC content of each grain size category with the δ13C of the bulk sediment indicated that the terrestrial organic material in the Changjiang River Estuary was transported seaward and dispersed to the Cyclonic Eddy modern sediments to the southwest of the Cheju Island via two pathways： one was a result of the Changjiang River Diluted Water （CDW） northeastward extending branch driven by the North Jiangsu Coastal Current and the Yellow Sea Coastal Current, while the other one was the result of the CDW southward extending branch driven by the Taiwan Warm Current.

Impact of typhoon Lekima(2019)on material transport in Laizhou Bay using Lagrangian coherent structures

Typhoon has an impact on an estuary and coastal environment.However,the present research lacks the detailed description of material transport processes during typhoon passage,such as the transport channels and barriers in the course of material transport and material accumulation area,etc.Therefore,Lagrangian coherent structures(a method developed for describing the transport structure of fluids in recent years)was introduced to investigate and predict the floating material and debris transport process in the Laizhou Bay,Bohai Sea,during typhoon Lekima in 2019.Results show that the Lagrangian coherent structure could well explain the complex flow phenomena in the bay.During the typhoon,the general direction of floating material transport in the Laizhou Bay was anticlockwise.There was a channel for material transport in the northwest and south of the bay,and there are transportation obstacles in the northeast-southwest direction in the middle of the bay.Therefore,the typhoon might worsen the water quality.These results provide references for precise countermeasures to control the formulation of pollution in the Laizhou Bay.

Novel hole transport layer of nickel oxide composite with carbon for high-performance perovskite solar cells

A depth behavioral understanding for each layer in perovskite solar cells （PSCs） and their inter[acial interactions as a whole has been emerged for further enhancement in power conversion efficiency （PCE）. Herein, NiO@Carbon was not only simulated as a hole transport layer but also as a counter electrode at the same time in the planar heterojunction based PSCs with the program wxAMPS （analysis of microelectronic and photonic structures）-lD. Simulation results revealed a high dependence of PCE on the effect of band offset between hole transport material （HTM） and perovskite layers. Meanwhile, the valence band offset （AEv） of NiO-HTM was optimized to be -0.1 to -0.3 eV lower than that of the perovskite layer. Additionally, a barrier cliff was identified to significantly influence the hole extraction at the HTM/absorber interface. Conversely, the AEv between the active material and NiO@Carbon-HTM was derived to be -0.15 to 0.15 eV with an enhanced efficiency from 15% to 16%.

A novel phenoxazine-based hole transport material for efficient perovskite solar cell

Based on the previous research work in our laboratory, we have designed and synthesized a small-molecule, hole transport material （HTM） POZ6-2 using phenoxazine （POZ） as central unit and dicyanovinyl units as electron-withdrawing terminal groups. Through the introduction ofa 2-ethyl-hexyl bulky chain into the POZ core unit, POZ6-2 exhibits good solubility in organic solvents. In addition, POZ6-2 possesses appropriate energy levels in combination with a high hole mobility and conductivity in its pristine form. Therefore, it can readily be used as a dopant-flee HTM in perovskite solar cells （PSCs） and a conversion efficiency of 10.3% was obtained. The conductivity of the POZ6-2 layer can be markedly enhanced via doping in combination with typical additives, such as 4-tert-butylpyridine （TBP） and lithium bis（trifluoromethanesulfonyl） imide （LiTFS1）. Correspondingly, the efficiency of the PSCs was further improved to 12.3% using doping strategies. Under the same conditions, reference devices based on the well-known HTM Spiro-OMeTAD show an efficiency of 12.8%.

Crucial role of charge transporting layers on ion migration in perovskite solar cells

The device preconditioning dependent hysteresis and the consequential performance degradation hinder the actual performance and stability of the perovskite solar cells. Ion migration and charge trapping in the perovskite with large contribution from grain boundaries are the most common interpretations for the hysteresis. Yet, the high performing devices often include intermediate hole and electron transporting layers, which can further complicate the dynamical process in the device. Here, by using Kelvin Probe Force Microscopy and Confocal Photoluminescence Microscopy, we elucidate the impact of chargetransporting layers and excess MAI on the spatial and temporal variations of the photovoltage on the MAPbI3-based solar cells. By studying the devices layer by layer, we found that the light-induced ion migration occurs predominantly in the presence of an imbalanced charge extraction in the solar cells, and the charge transporting layers play crucial role in suppressing it. Careful selection and processing of the electron and hole-transporting materials are thus essential for making perovskite solar cells free from the ion migration effect.

Highly stable perovskite solar cells with a novel Ni-based metal organic complex as dopant-free hole-transporting material

Hole-transporting material(HTM)plays a paramount role in enhancing the photovltaic performance of perovskite solar cells(PSCs).Currently,the vast majority of these HTMs employed in PSCs are organic small molecules and polymers,yet the use of organic metal complexes in PSCs applications remains less explored.To date,most of reported HTMs require additional chemical additives(e.g.Li-TFSI,t-TBP)towards high performance,however,the introduction of additives decrease the PSCs device stability.Herein,an organic metal complex(Ni-TPA)is first developed as a dopant-free HTM applied in PSCs for its facile synthesis and efficient hole extract/transfer ability.Consequently,the dopant-free Ni-TPAbased device achieves a champion efficiency of 17.89%,which is superior to that of pristine Spiro-OMeTAD(14.25%).Furthermore,we introduce a double HTM layer with a graded energy bandgap containing a Ni-TPA layer and a CuSCN layer into PSCs,the non-encapsulated PSCs based on the Ni-TPA/CuSCN layers affords impressive efficiency up to 20.39%and maintains 96%of the initial PCE after 1000 h at a relative humidity around 40%.The results have demonstrated that metal organic complexes represent a great promise for designing new dopant-free HTMs towards highly stable PSCs.

Decorating hole transport material with −CF_(3) groups for highly efficient and stable perovskite solar cells

The hole transport material (HTM) plays an extremely important role to determine the power conversion efficiency (PCE) and the stability of perovskite solar cells (PSCs). Herein, we report an effective strategy to improve the performance of HTMs by introducing −CF_(3) groups via the rational decorative mode. Upon direct attachment or nonconjugated alkoxyl bridging of −CF_(3) groups on the terminal diphenylamines, the resulting molecular HTMs, i.e., 2,7-BCzA4CF_(3) and 2,7-BCzA4OCCF_(3), show distinct properties. Compared with 2,7-BCzA4CF_(3), the nonconjugated alkoxyl bridging −CF_(3) group-based 2,7-BCzA4OCCF_(3) exhibits better thermal stability, hydrophobicity, and a dramatically upgraded hole mobility by 135.7-fold of magnitude to 1.71 × 10^(−4) cm^(2) V^(−1) S^(−1). The PSCs with 2,7-BCzA4OCCF_(3) as HTM exhibit an PCE of up to 20.53% and excellent long-term stability, maintaining 92.57% of their performance for 30 days in air with humidity of 30% without encapsulation. This work provides beneficial guidelines for the design of new HTMs for efficient and stable PSCs.

Pyridine-triphenylamine hole transport material for inverted perovskite solar cells

In the light of superior interaction between pyridine unit and perovskite,a facile star-shaped triphenylamine-based hole transport material(HTM)incorporating pyridine core(coded as H-Pyr)is designed and synthesized.A reference HTM with benzene core,coded as H-Ben,is also prepared for a comparative study.The effects of varying core on HTMs are investigated by comparing the photophysical,electrochemical and hole mobility properties.It is found that pyridine core exhibits better conjunction and decreased dihedral angles with triphenylamine side arms than that of benzene,leading to obviously better hole mobility and well-matched work function.The perovskite film prepared on H-Pyr also shows improved crystallization than on H-Ben.Photoluminescence and electrochemical impedance studies indicate improved charge extraction and reduced recombination in the H-Pyr-based perovskite solar cells.Consequently,H-Pyr-based device exhibits higher efficiency than H-Ben-based one.After doping with a Lewis acid,tris(pentafluorophenyl)borane,H-Pyr-based device delivers a champion efficiency of 17.09%,which is much higher compared with 12.14% of the device employing conventional poly(3,4-ethy lenedioxythiophene)polystyrene sulfonate(PEDOT:PSS)as HTM.Moreover,the H-Pyr-based device displays good long-term stability that the power conversion efficiency remains over 80% of the initial value after storage in ambient(relative humidity=50±5%)for 20 days.