In order to expand the sources of raw materials for edible fungus cultivation, reduce the use of wood, and realize the harmless treatment and efficient utilization of bamboo sawdust, bamboo sawdust was used to partial...In order to expand the sources of raw materials for edible fungus cultivation, reduce the use of wood, and realize the harmless treatment and efficient utilization of bamboo sawdust, bamboo sawdust was used to partially replace the broad-leaved wood sawdust in the conventional formula, and the growth of Ganoderma lucidum and Stropharia rugosoannulata mycelia in a large test tube in different matrix formulas was studied. The results show that the mycelia of the two edible fungi could grow normally in the matrices with bamboo sawdust;the growth of the mycelia in various formulas was different, and the performances of different strains of the same species were also different. Compared with the conventional formula, the suitable substitution amount of bamboo sawdust for the G. lucidum strains was 30%-45%, and that for S. rugosoannulata strains was 16%-32%.展开更多
A transmission-mode GaAs photocathode includes four layers of glass, Si3N4, Gal-xAlxAs and GaAs. A gradientdoping photocathode sample was obtained by molecular beam epitaxy and its transmittance was measured by spectr...A transmission-mode GaAs photocathode includes four layers of glass, Si3N4, Gal-xAlxAs and GaAs. A gradientdoping photocathode sample was obtained by molecular beam epitaxy and its transmittance was measured by spectrophotometer from 600 nm to 1100 nm. The theoretical transmittance is derived and simulated based on the matrix formula for thin film optics. The simulation results indicate the influence of the transition layers and the three thin-film layers except glass on the transmittance spectra. In addition, a fitting coefficient needed for error modification enters into the fitted formula. The fitting results show that the relative error in the full spectrum reduces from 19.51% to 4.35% after the formula is modified. The coefficient and the thicknesses are gained corresponding to the minimum relative error, meanwhile each layer and total thin-film thickness deviation in the module can be controlled within 73. The presence of glass layer roughness, layer interface effects and surface oxides is interpreted on the modification.展开更多
基金Supported by the Science and Technology Project of Guizhou Province ((2022)YB176,[2020]1Y073,(2019)2773,[2019]3007)。
文摘In order to expand the sources of raw materials for edible fungus cultivation, reduce the use of wood, and realize the harmless treatment and efficient utilization of bamboo sawdust, bamboo sawdust was used to partially replace the broad-leaved wood sawdust in the conventional formula, and the growth of Ganoderma lucidum and Stropharia rugosoannulata mycelia in a large test tube in different matrix formulas was studied. The results show that the mycelia of the two edible fungi could grow normally in the matrices with bamboo sawdust;the growth of the mycelia in various formulas was different, and the performances of different strains of the same species were also different. Compared with the conventional formula, the suitable substitution amount of bamboo sawdust for the G. lucidum strains was 30%-45%, and that for S. rugosoannulata strains was 16%-32%.
基金supported by the National Natural Science Foundation of China (Grant No. 60678043)the Research and Innovation Plan for Graduate Students of Jiangsu Higher Education Institutions of China (Grant No. CX09B-096Z)
文摘A transmission-mode GaAs photocathode includes four layers of glass, Si3N4, Gal-xAlxAs and GaAs. A gradientdoping photocathode sample was obtained by molecular beam epitaxy and its transmittance was measured by spectrophotometer from 600 nm to 1100 nm. The theoretical transmittance is derived and simulated based on the matrix formula for thin film optics. The simulation results indicate the influence of the transition layers and the three thin-film layers except glass on the transmittance spectra. In addition, a fitting coefficient needed for error modification enters into the fitted formula. The fitting results show that the relative error in the full spectrum reduces from 19.51% to 4.35% after the formula is modified. The coefficient and the thicknesses are gained corresponding to the minimum relative error, meanwhile each layer and total thin-film thickness deviation in the module can be controlled within 73. The presence of glass layer roughness, layer interface effects and surface oxides is interpreted on the modification.
