This article proposes the maximum test for a sequence of quadratic form statistics about score test in logistic regression model which can be applied to genetic and medicine fields.Theoretical properties about the max...This article proposes the maximum test for a sequence of quadratic form statistics about score test in logistic regression model which can be applied to genetic and medicine fields.Theoretical properties about the maximum test are derived.Extensive simulation studies are conducted to testify powers robustness of the maximum test compared to other two existed test.We also apply the maximum test to a real dataset about multiple gene variables association analysis.展开更多
A maximum test in lieu of forcing a choice between the two dependent samples t-test and Wilcoxon signed-ranks test is proposed. The maximum test, which requires a new table of critical values, maintains nominal α whi...A maximum test in lieu of forcing a choice between the two dependent samples t-test and Wilcoxon signed-ranks test is proposed. The maximum test, which requires a new table of critical values, maintains nominal α while guaranteeing the maximum power of the two constituent tests. Critical values, obtained via Monte Carlo methods, are uniformly smaller than the Bonferroni-Dunn adjustment, giving it power superiority when testing for treatment alternatives of shift in location parameter when data are sampled from non-normal distributions.展开更多
AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD ...AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 ＜0.01; Nutren(R): t= 5.2, P= 0.001＜0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001＜0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001＜0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.展开更多
The maximum specific sludge activity of granular sludge from large scale UASB, IC and Biobed anaerobic reactors were investigated by batch tests. The limitation factors related to maximum specific sludge activity (dif...The maximum specific sludge activity of granular sludge from large scale UASB, IC and Biobed anaerobic reactors were investigated by batch tests. The limitation factors related to maximum specific sludge activity (diffusion, substrate sort, substrate concentration and granular size) were studied. The general principle and procedure for the precise measurement of maximum specific sludge activity were suggested. The potential capacity of loading rate of the IC and Biobed anaerobic reactors were analyzed and compared by use of the batch tests results.展开更多
The study focused on the detection of indicators of climate change in 24-hourly annual maximum series (AMS) rainfall data collected for 36 years (1982-2017) for Warri Township, using different statistical methods yiel...The study focused on the detection of indicators of climate change in 24-hourly annual maximum series (AMS) rainfall data collected for 36 years (1982-2017) for Warri Township, using different statistical methods yielded a statistically insignificant positive mild trend. The IMD and MCIMD downscaled model’s time series data respectively produced MK statistics varying from 1.403 to 1.4729, and 1.403 to 1.463 which were less than the critical Z-value of 1.96. Also, the slope magnitude obtained showed a mild increasing trend in variation from 0.0189 to 0.3713, and 0.0175 to 0.5426, with the rate of change in rainfall intensity at 24 hours duration as 0.4536 and 0.42 mm/hr.year (4.536 and 4.2 mm/decade) for the IMD and the MCIMD time series data, respectively. The trend change point date occurred in the year 2000 from the distribution-free CUSUM test with the trend maintaining a significant and steady increase from 2010 to 2015. Thus, this study established the existence of a trend, which is an indication of a changing climate, and satisfied the condition for rainfall Non-stationary intensity-duration-frequency (NS-IDF) modeling required for infrastructural design for combating flooding events.展开更多
A complex mechatronics system Bayesian plan of demonstration test is studied based on the mixed beta distribution. During product design and improvement various information is appropriately considered by introducing i...A complex mechatronics system Bayesian plan of demonstration test is studied based on the mixed beta distribution. During product design and improvement various information is appropriately considered by introducing inheritance factor, moreover, the inheritance factor is thought as a random variable, and the Bayesian decision of the qualification test plan is obtained, and the correctness of a Bayesian model presented is verified. The results show that the quantity of the test is too conservative according to classical methods under small binomial samples. Although traditional Bayesian analysis can consider test information of related or similar products, it ignores differences between such products. The method has solved the above problem, furthermore, considering the requirement in many practical projects, the differences among this method, the classical method and Bayesian with beta distribution are compared according to the plan of reliability acceptance test.展开更多
In the constant-stress accelerated life test, estimation issues are discussed for a generalized half-normal distribution under a log-linear life-stress model. The maximum likelihood estimates with the corresponding fi...In the constant-stress accelerated life test, estimation issues are discussed for a generalized half-normal distribution under a log-linear life-stress model. The maximum likelihood estimates with the corresponding fixed point type iterative algorithm for unknown parameters are presented, and the least square estimates of the parameters are also proposed. Meanwhile, confidence intervals of model parameters are constructed by using the asymptotic theory and bootstrap technique. Numerical illustration is given to investigate the performance of our methods.展开更多
基金This work of Jiayan Zhu is partially supported by seeding project funding(2019ZZX026)scientific research project funding of talent recruitment,and start up funding for scientific research of Hubei University of Chinese MedicineThis work of Zhengbang Li is partially supported by self-determined research funds of Central China Normal University from colleges'basic research of MOE(CCNU18QN031).
文摘This article proposes the maximum test for a sequence of quadratic form statistics about score test in logistic regression model which can be applied to genetic and medicine fields.Theoretical properties about the maximum test are derived.Extensive simulation studies are conducted to testify powers robustness of the maximum test compared to other two existed test.We also apply the maximum test to a real dataset about multiple gene variables association analysis.
文摘A maximum test in lieu of forcing a choice between the two dependent samples t-test and Wilcoxon signed-ranks test is proposed. The maximum test, which requires a new table of critical values, maintains nominal α while guaranteeing the maximum power of the two constituent tests. Critical values, obtained via Monte Carlo methods, are uniformly smaller than the Bonferroni-Dunn adjustment, giving it power superiority when testing for treatment alternatives of shift in location parameter when data are sampled from non-normal distributions.
文摘AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 ＜0.01; Nutren(R): t= 5.2, P= 0.001＜0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001＜0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001＜0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.
文摘The maximum specific sludge activity of granular sludge from large scale UASB, IC and Biobed anaerobic reactors were investigated by batch tests. The limitation factors related to maximum specific sludge activity (diffusion, substrate sort, substrate concentration and granular size) were studied. The general principle and procedure for the precise measurement of maximum specific sludge activity were suggested. The potential capacity of loading rate of the IC and Biobed anaerobic reactors were analyzed and compared by use of the batch tests results.
文摘The study focused on the detection of indicators of climate change in 24-hourly annual maximum series (AMS) rainfall data collected for 36 years (1982-2017) for Warri Township, using different statistical methods yielded a statistically insignificant positive mild trend. The IMD and MCIMD downscaled model’s time series data respectively produced MK statistics varying from 1.403 to 1.4729, and 1.403 to 1.463 which were less than the critical Z-value of 1.96. Also, the slope magnitude obtained showed a mild increasing trend in variation from 0.0189 to 0.3713, and 0.0175 to 0.5426, with the rate of change in rainfall intensity at 24 hours duration as 0.4536 and 0.42 mm/hr.year (4.536 and 4.2 mm/decade) for the IMD and the MCIMD time series data, respectively. The trend change point date occurred in the year 2000 from the distribution-free CUSUM test with the trend maintaining a significant and steady increase from 2010 to 2015. Thus, this study established the existence of a trend, which is an indication of a changing climate, and satisfied the condition for rainfall Non-stationary intensity-duration-frequency (NS-IDF) modeling required for infrastructural design for combating flooding events.
基金National Advanced Research Project of China(No.51319030302)National Advanced Research Foundation of China(No.9140A 19030506KG0166)
文摘A complex mechatronics system Bayesian plan of demonstration test is studied based on the mixed beta distribution. During product design and improvement various information is appropriately considered by introducing inheritance factor, moreover, the inheritance factor is thought as a random variable, and the Bayesian decision of the qualification test plan is obtained, and the correctness of a Bayesian model presented is verified. The results show that the quantity of the test is too conservative according to classical methods under small binomial samples. Although traditional Bayesian analysis can consider test information of related or similar products, it ignores differences between such products. The method has solved the above problem, furthermore, considering the requirement in many practical projects, the differences among this method, the classical method and Bayesian with beta distribution are compared according to the plan of reliability acceptance test.
基金supported by the National Natural Science Foundation of China(1150143371473187)the Natural Science Basic Research Plan in Shaanxi Province of China(2016JQ1014)
文摘In the constant-stress accelerated life test, estimation issues are discussed for a generalized half-normal distribution under a log-linear life-stress model. The maximum likelihood estimates with the corresponding fixed point type iterative algorithm for unknown parameters are presented, and the least square estimates of the parameters are also proposed. Meanwhile, confidence intervals of model parameters are constructed by using the asymptotic theory and bootstrap technique. Numerical illustration is given to investigate the performance of our methods.
