期刊文献+
共找到281篇文章
< 1 2 15 >
每页显示 20 50 100
A Procedure for Trisecting an Acute Angle (Method 2)
1
作者 Lyndon O. Barton 《Advances in Pure Mathematics》 2024年第4期204-213,共10页
This paper presents an alternate graphical procedure (Method 2), to that presented in earlier publications entitled, “A Procedure for Trisecting an Acute Angle” and “A Key to Solving the Angle Trisection Problem”.... This paper presents an alternate graphical procedure (Method 2), to that presented in earlier publications entitled, “A Procedure for Trisecting an Acute Angle” and “A Key to Solving the Angle Trisection Problem”. The procedure, when applied to the 30˚ and 60˚ angles that have been “proven” to be nottrisectable and the 45˚ benchmark angle that is known to be trisectable, in each case produced a construction having an identical angular relationship with Archimedes’ Construction, as in Section 2 on THEORY of this paper, where the required trisection angle was found to be one-third of its respective angle (i.e. DE’MA = 1/3 DE’CG). For example, the trisection angle for the 30˚, 45˚ and 60˚ angles were 10.00000˚, 15.00000˚, and 20.00000˚, respectively, and Section 5 on PROOF in this paper. Therefore, based on this identical angular relationship and the numerical results (i.e. to five decimal places), which represent the highest degree of accuracy and precision attainable by The Geometer’s Sketch Pad software, one can only conclude that not only the geometric requirements for arriving at an exact trisection of the 30˚ and 60˚ angle (which have been “proven” to be not-trisectable) have been met, but also, the construction is valid for any arbitrary acute angle, despite theoretical proofs to the contrary by Wantzel, Dudley, and others. 展开更多
关键词 Archimedes Construction College Geometry College Mathematics angle Trisection Famous Problems in Mathematics Mechanism Analysis Geometer’s sketch Pad
下载PDF
A Simplified Graphical Procedure for Constructing a 10˚or 20˚Angle
2
作者 Lyndon O. Barton 《Advances in Pure Mathematics》 2023年第7期442-448,共7页
This paper presents a simplified graphical procedure for constructing, using an unmarked straightedge and a compass only, a 10˚ to 20˚ angle, which is in other words, trisecting a 30˚ or 60˚ angle. The procedure, when... This paper presents a simplified graphical procedure for constructing, using an unmarked straightedge and a compass only, a 10˚ to 20˚ angle, which is in other words, trisecting a 30˚ or 60˚ angle. The procedure, when applied to the 30˚ and 60˚ angles that have been “proven” to be not trisectable, produced a construction having the identical angular relationship with Archimedes’ Construction, in which the required trisection angles were found to be 10.00000˚ and 20.00000˚ respectively (i.e. exactly one-third of the given angle or ∠E’MA = 1/3∠E’CG). Based on this identical angular relationship as well as the numerical results obtained, one can only conclude that the geometric requirements for arriving at an exact trisection of the 30˚ or 60˚ angle, and therefore the construction of a 10˚ or 20˚ angle, have been met, notwithstanding the theoretical proofs of Wantzel, Dudley, and others. Thus, the solution to the age-old trisection problem, with respect to these two angles, has been accomplished. 展开更多
关键词 Archimedes Construction College Geometry angle Trisection Trisection of an angle Famous Problems in Mathematics. Geometer’s sketch Pad Mechanisms Mechanism Analysis KINEMATICs Trisector
下载PDF
A Key to Solving the Angle Trisection Problem
3
作者 Lyndon O. Barton 《Advances in Pure Mathematics》 2023年第9期625-634,共10页
This paper describes the methodology (or approach) that was key to the solution of the angle trisection problem published earlier in article entitled, “A Procedure For Trisecting An Acute Angle.” It was an approach ... This paper describes the methodology (or approach) that was key to the solution of the angle trisection problem published earlier in article entitled, “A Procedure For Trisecting An Acute Angle.” It was an approach that required first, designing a working model of a trisector mechanism, second, studying the motion of key elements of the mechanism and third, applying the fundamental principles of kinematics to arrive at the desired results. In presenting these results, since there was no requirement to provide a detailed analysis of the final construction, this information was not included. However, now that the publication is out, it is considered appropriate as well as instructive to explain more fully the mechanism analysis of the trisector in graphical detail, as covered in Section 3 of this paper, that formed the basis of the long sought solution to the age-old Angle Trisection Problem. 展开更多
关键词 Archimedes Construction College Geometry College Mathematics angle Trisection Trisector Famous Problems in Mathematics History of Mathematics Mechanism Analysis KINEMATICs Geometer’s sketch Pad
下载PDF
骨性Angle′s Ⅲ类错患者正畸手术前后下颌角矢量点位置的变化及意义 被引量:1
4
作者 王晨星 高振杰 陈刚 《山东医药》 CAS 北大核心 2011年第22期98-99,共2页
目的观察骨性Angle′sⅢ类错患者下颌角矢量点(Gov点)位置变化,并探讨其临床意义。方法取天津地区健康人29例为对照组,接受正手术治疗的骨性Angle′sⅢ类错畸形患者15例为观察组。均拍摄头颅侧位X线片,测量Gov点的座标。结果观察... 目的观察骨性Angle′sⅢ类错患者下颌角矢量点(Gov点)位置变化,并探讨其临床意义。方法取天津地区健康人29例为对照组,接受正手术治疗的骨性Angle′sⅢ类错畸形患者15例为观察组。均拍摄头颅侧位X线片,测量Gov点的座标。结果观察组术前、术后及对照组Gov点横坐标分别为(-4.54±0.51)、(-5.10±0.69)、(-5.02±0.35)cm,纵坐标分别为(-7.76±0.40)、(-7.65±0.57)、(-7.50±0.43)cm,观察组术前Gov点横、纵坐标与术后及对照组比较P均<0.05,观察组术后与对照组Gov点横、纵坐标比较P均>0.05。对照组下颌神经孔与Gov点间距为(1.35±0.16)cm,观察组术前为(1.27±0.19)cm,两组相比P>0.05。结论骨性Angle′sⅢ类错患者Gov点位置向前下移位,正手术后得以纠正。Gov点位置可能与下颌功能状态存在内在联系,可以作为正手术术前制定手术计划及术后评估矫治效果的指标。 展开更多
关键词 骨性anglesⅢ类错 下颌角矢量点 二维X线头影测量
下载PDF
Modified viscocanalostomy in the Chinese population with open angle glaucoma: a 10-year follow-up results 被引量:3
5
作者 Ya Liang Hong Sun +4 位作者 Jie Shuai Kai Xu Fang-Fang Ji Sucijanti Zhi-Lan Yuan 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2019年第3期429-435,共7页
AIM: To study the long-term efficacy and safety of modified viscocanalostomy in Chinese people with open angle glaucoma(OAG).METHODS: This retrospective study included a total of 100 eyes from 100 Chinese patients wit... AIM: To study the long-term efficacy and safety of modified viscocanalostomy in Chinese people with open angle glaucoma(OAG).METHODS: This retrospective study included a total of 100 eyes from 100 Chinese patients with medically uncontrolled OAG. All the patients underwent modified viscocanalostomy with injection of viscoelastic material in the surgically created ostia of Schlemm's canal(SC). The modifications included peeling of the inner wall of SC and the juxtacanalicular meshwork, use of mitomycin C, and loosely suturing the superficial scleral flap. Intraocular pressure(IOP), visual acuity, number of medications, laser goniopuncture data and complications were recorded. The definition of complete(qualified) success was an IOP equal to or lower than 21, 18, 16 mm Hg without(with or without) anti-glaucoma medications. RESULTS: The mean IOP was 33.5±9.9 mm Hg before surgery, 15.2±3.6 mm Hg(mean IOP reduction of 51%) at 5 y after surgery, and 15.6±2.8 mm Hg(mean IOP reduction of 49.9%) at 10 y after surgery(P<0.001). The number of anti-glaucoma medications dropped from 2.39±0.5 preoperatively to 0.47±0.8 at 5 y and 0.67±0.8 at 10 y postoperatively(P<0.001). The follow-up period was 104.5±37.0 mo. The qualified success rate for an IOP of 21, 18 or 16 mm Hg or less was 84% [95% confidence interval(CI): 0.80-0.88], 73%(95%CI: 0.68-0.78), and 59%(95%CI: 0.52-0.66) after 5 y, and 80%(95%CI: 0.76-0.84), 69%(95%CI: 0.64-0.74), 51%(95%CI: 0.44-0.58) after 10 y, respectively. There was a relationship between age, preoperative IOP and success rate(P<0.01, P<0.05). A total of 31 eyes(31.3%)in 31 patients underwent laser goniopuncture, decreasing the IOP from 22.9±4.3 mm Hg to 16.3±2.5 mm Hg(P<0.01). Neither blebitis nor endophthalmitis occurred.CONCLUSION: Modified viscocanalostomy could be performed to lower IOP, decrease multiple anti-glaucoma drops use as well. It's a safe procedure with less complications over 10 y in Chinese individuals with OAG. 展开更多
关键词 non-penetrating GLAUCOMA surgery VIsCOCANALOsTOMY schlemm’s CANAL open angle GLAUCOMA laser goniopuncture
下载PDF
Elevated urine formaldehyde in elderly patients with primary open angle glaucoma 被引量:3
6
作者 Ying Cui Tao Su +6 位作者 Shao-Dan Zhang Ping Huang Ying-Ge He Ying Liu Chun Zhang Robert Ritch Rong-Qiao He 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2016年第3期411-416,共6页
AIM:To investigate the risk factor of primary open angle glaucoma(POAG),which is the leading cause of irreversible blindness worldwide.An abnormally high level of endogenous formaldehyde(FA) has recently been fou... AIM:To investigate the risk factor of primary open angle glaucoma(POAG),which is the leading cause of irreversible blindness worldwide.An abnormally high level of endogenous formaldehyde(FA) has recently been found correlated with cell death and neurodegenerative disease,raising the possibility of a putative correlation of abnormal endogenous FA with POAG.· METHODS:Thirty-four elderly patients with POAG and sixteen healthy controls were enrolled.Glaucomatous visual defects were present at both the functional(visual field) and structural[retinal nerve fiber layer(RNFL)thickness]levels.Morning urine samples were obtained and were analyzed by high-performance liquid chromatography(HPLC) to detect the endogenous FA level in a double blind manner.· RESULTS:Patients with POAG(P 〈0.05) had significantly higher urine FA levels.The urine FA level of patients with severe visual field defects[mean deviation(MD)≥12 dB]was significantly(P〈0.001) greater than that of patients with mild to moderate defects(MD〈12 dB).By optical coherence tomography(OCT),the superior and inferior RNFL thickness of POAG group was significantly(P〈0.001) thinner than in controls.Furthermore,the superior and inferior thinning of the RNFL was correlated with the elevation of urine FA concentration.CONCLUSION:Endogenous FA level is positively correlated with the neuronal defects of POAG. 展开更多
关键词 primary open angle glaucoma urineformaldehyde Alzheimer's disease
下载PDF
雷诺数和侧风对S型垂直轴风力机气动特性的影响
7
作者 朱洋 左行 +1 位作者 朱建勇 赵秀勇 《风机技术》 2024年第1期69-76,共8页
相较于工作在郊外良好风场的大型风力机,小型风力机易受城市风环境如低风速、高湍流度以及时变风速风向的影响。采用数值模拟手段研究了雷诺数和来流倾角对小型S型垂直轴风力机气动性能的影响。研究结果表明:S型风力机的气动性能对雷诺... 相较于工作在郊外良好风场的大型风力机,小型风力机易受城市风环境如低风速、高湍流度以及时变风速风向的影响。采用数值模拟手段研究了雷诺数和来流倾角对小型S型垂直轴风力机气动性能的影响。研究结果表明:S型风力机的气动性能对雷诺数不敏感,功率系数几乎不随雷诺数变化;侧风导致S型风力机的气动性能变差,静扭矩系数和功率系数降低,并且随着侧风来流倾角的增大,气动性能越差,侧风影响的流动机理一方面是来流倾角降低了水平速度分量,另一个方面是竖直速度分量减小了前进叶片的压力差,增加回转叶片的压力差,进一步加剧了气动性能的恶化。 展开更多
关键词 风能 s型垂直轴风力机 雷诺数 来流倾角 数值模拟
下载PDF
Clinical significance of Baumann's angle in the percutaneous pinning fixation for supracondylar fractures of the humerus in children
8
作者 孔建中 《外科研究与新技术》 2005年第3期174-174,共1页
To evaluate the clinical significance of Baumann’s angle in the closed reduction and percutaneous pinning fixation for supracondylar fractures of the humerus in children.Methods There were 97 children (male 59,female... To evaluate the clinical significance of Baumann’s angle in the closed reduction and percutaneous pinning fixation for supracondylar fractures of the humerus in children.Methods There were 97 children (male 59,female 38,mean age of 6.8 years) with displaced supracondylar fracrtures of the humerus were treated in this hospital.Under fluoroscopy guidance,three-dimensional displacement of fractures was corrected by closed reduction.The percutaneous Kirschner wire pinning was applied only if the radiographs demonstrated that Baumann’s angle was less than 4 degree compared to that on the normal side.All of them were followed up for 34.5 months (range,12 to 48 months).Results There was one case with ulnar nerve palsy associated with the pinning.There were no Volkmann’s contracture in this group.X-ray examinations revealed an average 73.7 degrees of Baumann angle on the injured and 72.8 on uninjured side.An average 7.6 degrees of the carrying angle on the injured and 9.7 on uninjured side were also demonstrated by radiography.Five patients developed slight cubitus varus deformity.The result according to Flynn criteria were excellent in 85 patients (87.6%),good in 12 patients (12.4%).Conclusion The satisfactory results can be gained in children with displaced supracondylar fractures of the humerus by restoration of the normal Baumann angle and percutaneous pinning fixation.18 refs,2 figs. 展开更多
关键词 Clinical significance of Baumann’s angle in the percutaneous pinning fixation for supracondylar fractures of the humerus in children
下载PDF
水溶液一步法制备铜基Cu_(2)S微纳米结构及其超疏水性能
9
作者 陈新华 李晓毅 +2 位作者 张万强 侯珂珂 王宏胜 《信阳师范学院学报(自然科学版)》 CAS 北大核心 2023年第3期463-467,共5页
无需任何模板、表面活性剂或添加剂,通过廉价、简洁、易操作的水溶液一步法,将预处理的铜箔浸渍于一定浓度的CH_(3)CSNH_(2)溶液中,室温条件下反应,得到了具有微-纳米双尺寸粗糙结构的硫化亚铜超疏水薄膜。结果表明,铜基底上生成的硫化... 无需任何模板、表面活性剂或添加剂,通过廉价、简洁、易操作的水溶液一步法,将预处理的铜箔浸渍于一定浓度的CH_(3)CSNH_(2)溶液中,室温条件下反应,得到了具有微-纳米双尺寸粗糙结构的硫化亚铜超疏水薄膜。结果表明,铜基底上生成的硫化亚铜微-纳米双尺度粗糙结构表面对水的静态接触角高达171°,水滴滚动角低至3.5°,具有优异的超疏水性能。 展开更多
关键词 Cu_(2)s 微纳米结构 超疏水 接触角
下载PDF
离心泵S形叶片流动特性及水力性能分析
10
作者 赵伟国 寇相儒 +2 位作者 张翠莲 罗云霞 周忠亮 《液压气动与密封》 2023年第6期55-58,62,共5页
对离心泵而言,叶片出口角β2是影响泵性能的一个重要参数。基于Fluent离心泵全流场数值模拟,对某型号低比转数离心泵进行了大出口角叶形的改形设计,研究了不同大出口角对离心泵水力性能的影响,并对比分析了原模型泵与S形叶片离心泵水力... 对离心泵而言,叶片出口角β2是影响泵性能的一个重要参数。基于Fluent离心泵全流场数值模拟,对某型号低比转数离心泵进行了大出口角叶形的改形设计,研究了不同大出口角对离心泵水力性能的影响,并对比分析了原模型泵与S形叶片离心泵水力特性及流动特性。结果表明:离心泵扬程随着出口角的增大而增大,在出口角为90°时达到最大值。当出口角为90°时,S形叶片的水力性能最佳,在设计工况下及大流量工况泵扬程显著提升且效率有小幅度提升,但小流量工况下泵效率略有下降。S形叶片可以有效抑制离心泵叶轮内的边界层分离现象,且随着流量的增大抑制效果越明显。 展开更多
关键词 离心泵 低比转速 s形叶片 叶片出口角
下载PDF
基于频率切换实现电池恒流和恒压充电的LCC-S补偿WPT系统研究 被引量:3
11
作者 邹静 徐耘英 +2 位作者 彭娟娟 刘翼 陈耀军 《电源学报》 CSCD 北大核心 2023年第3期117-124,共8页
无线电能传输WPT(wireless power transfer)系统具有安全、方便、美观等性能优势,已逐步渗入到人们的日常生活中。在电池充电应用中,通常期望WPT系统能够在零相角ZPA(zero phase angle)条件下实现负载无关的恒流和恒压充电功能。提出了... 无线电能传输WPT(wireless power transfer)系统具有安全、方便、美观等性能优势,已逐步渗入到人们的日常生活中。在电池充电应用中,通常期望WPT系统能够在零相角ZPA(zero phase angle)条件下实现负载无关的恒流和恒压充电功能。提出了一种基于频率切换的LCC-S补偿WPT系统及其参数设计方法,可使系统在2个不同的ZPA频率点分别实现负载无关的恒流和恒压充电输出,无需改变电路拓扑结构。设计的LCC-S补偿WPT系统接收侧仅有一个补偿电容,确保了WPT系统接收侧紧凑性。最后,搭建了一台充电电流和电压分别为3 A和50 V的实验样机,验证了本研究中WPT系统的合理性与实用性。 展开更多
关键词 无线电能传输 恒流 恒压 零相角 LCC-s
下载PDF
基于无人机点云与改进R_(S)表征法的结构面粗糙度定量分析
12
作者 杨泽 李保天 +3 位作者 宋盛渊 秦龙 刘殿泽 黄迪 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2023年第11期72-81,共10页
为研究采样尺寸、采样间距对高陡斜坡岩体结构面粗糙度评价结果的影响,选取藏东南某铁路察达车站工点左岸高陡岩质斜坡为研究区,提出采用无人机多角度贴近摄影测量技术获取毫米级点云数据以建立研究区斜坡岩体高精度三维模型,并从中选... 为研究采样尺寸、采样间距对高陡斜坡岩体结构面粗糙度评价结果的影响,选取藏东南某铁路察达车站工点左岸高陡岩质斜坡为研究区,提出采用无人机多角度贴近摄影测量技术获取毫米级点云数据以建立研究区斜坡岩体高精度三维模型,并从中选取典型区域裁剪出带有点云信息的27条面状结构面,使用Delaunay三角化原理对结构面进行网格化重建。基于此,提出一种采用点云拟合平面代替R_(S)表征法中垂直投影平面的新方法,并研究结构面粗糙度在不同采样尺寸、采样间距下的变化规律,结果表明:不同三角剖分方式对R_(S)表征值影响较小;结构面粗糙度具有尺寸效应与间距效应,其粗糙度表征值随结构面尺寸的增加逐渐趋于稳定,随结构面采样间距增大逐渐减小;部分存在尺寸效应的结构面存在“假有效采样尺寸”与“真有效采样尺寸”。在进行粗糙度评价时应确保所得有效采样尺寸为“真有效采样尺寸”。 展开更多
关键词 多角度贴近摄影 结构面粗糙度 改进R_(s)表征法 尺寸效应 间距效应 三角剖分
下载PDF
“S”形试件的五轴数控机床综合动态精度检测特性研究 被引量:14
13
作者 杜丽 张信 +2 位作者 王伟 付振华 石荣波 《电子科技大学学报》 EI CAS CSCD 北大核心 2014年第4期629-635,共7页
以ISO国际标准试件、NAS979系列试件、NCG试件等为例,比较了目前国内外常用机床精度检测试件的检测性能与特点,计算了"S"形检测试件的开闭角、扭曲角、曲线曲率以及曲面法曲率等特征,研究了"S"形检测试件在几何造... 以ISO国际标准试件、NAS979系列试件、NCG试件等为例,比较了目前国内外常用机床精度检测试件的检测性能与特点,计算了"S"形检测试件的开闭角、扭曲角、曲线曲率以及曲面法曲率等特征,研究了"S"形检测试件在几何造型方面的特性,证明了"S"形试件能基本体现和覆盖机床的各种复杂姿态,以及在机床多轴联动精度检测和机床动态刚度特性检测等方面更具全面性。为基于"S"形检测试件的五轴数控机床动态精度检测提供相应的科学依据,为五轴数控机床精度检测试件的型面构造研究提供理论参考,有助于"S"形试件国际标准草案的制定与推广。 展开更多
关键词 法曲率 开闭角 反向间隙 s”形检测试件 扭曲角
下载PDF
GSTT1和GSTM1基因多态性与重庆地区汉族人群中原发性闭角型青光眼易感性的关系 被引量:4
14
作者 陈瑾 侯胜平 +2 位作者 高小劲 胡泊 李平华 《第三军医大学学报》 CAS CSCD 北大核心 2013年第13期1410-1414,共5页
目的探讨中国汉族人群中谷胱甘肽硫转移酶M1(glutathione S-transferase M1,GSTM1)、谷胱甘肽硫转移酶T1(glutathione S-transferase T1,GSTT1)基因多态性与原发性闭角型青光眼易感性的关系。方法收集211例汉族原发性闭角型青光眼患者(p... 目的探讨中国汉族人群中谷胱甘肽硫转移酶M1(glutathione S-transferase M1,GSTM1)、谷胱甘肽硫转移酶T1(glutathione S-transferase T1,GSTT1)基因多态性与原发性闭角型青光眼易感性的关系。方法收集211例汉族原发性闭角型青光眼患者(primary angle-closure glaucoma,PACG)以及422例健康志愿者的血液标本(对照组),并根据诊断标准将PACG组分为急性(acute primary angle-closure glaucoma,APACG)和慢性(chronic primary angle-closure glaucoma,CPACG),并采用多重等位基因特异聚合酶链反应(multiplex PCR)技术检测GSTT1和GSTM1基因多态性。结果 GSTT1缺失基因型在PACG组中分布频率为53.1%,在对照组中的分布频率为53.8%,2组间无统计学差异(χ2=0.028 6,P=0.866);将PACG组分为APACG组和CPACG组后,GSTT1缺失基因型的分布频率分别为46.3%和55.4%,APACG组与对照组相比,无统计学差异(χ2=0.126 7,P=0.722),CPACG组与对照组相比,差异也无统计学意义(χ2=0.036 2,P=0.849)。在PACG组中GSTM1的缺失基因型的频率为58.3%,对照组中GSTM1缺失基因型的频率为56.3%,2组间的差异无统计学意义(χ2=0.206 3,P=0.650)。GSTM1在APACG组以及CPACG组中的分布频率分别为61.1%及56.3%,APACG组与对照组相比,其差异无统计学意义(χ2=0.027 9,P=0.867);CPACG组与对照组相比,其差异也无统计学意义(χ2=0.006 4,P=0.936)。此外,将GSTT1和GSTM1基因型联合进行分析,发现其4种基因型在各个病例组与对照组的比较中都没有统计学差异。结论在重庆地区的中国汉族人群中,未发现GSTT1缺失基因型和GSTM1缺失基因型与原发性闭角型青光眼的易感性相关,联合比较GSTT1和GSTM1基因多态性与原发性闭角型青光眼的易感性,也未发现明显相关性,而且与原发性闭角型青光眼的分类也不相关。 展开更多
关键词 谷胱甘肽硫转移酶 原发性闭角型青光眼 基因多态性
下载PDF
基于Matlab的S曲线加减速控制算法研究 被引量:4
15
作者 胡永安 陈彩凤 杨萌 《电子科技》 2017年第4期60-63,169,共5页
当数控加工型线为折线,路径段与路径段之间存在的夹角使得必须在拐点处进行加减速控制,以保证轨迹精度。目前,数控加工对单个坐标运动的控制方法有多种,其中较有代表性的是基于S型曲线的加减速控制方法,文中在S型加减速控制曲线基础上建... 当数控加工型线为折线,路径段与路径段之间存在的夹角使得必须在拐点处进行加减速控制,以保证轨迹精度。目前,数控加工对单个坐标运动的控制方法有多种,其中较有代表性的是基于S型曲线的加减速控制方法,文中在S型加减速控制曲线基础上建立S曲线加减速控制新算法,利用该算法给出路径段几何元素转接矢量夹角数学模型,并在此基础上给出许用速度与夹角的关系式,并得出第i路径段的转接速度Vi的大小不仅受到转接矢量夹角αi的影响,还与第i-1路径段和i+1路径段的转接速度以及第i路径段和第i+1路径段的路径长度有关。利用此算法经Matlab编程仿真得出当相邻两折线段夹角为90°和135°时,通过折线交点时对应各坐标运动速度的变化。 展开更多
关键词 s曲线 转接速度 夹角 MATLAB
下载PDF
采用S变换相位差及能量相对熵的换流变零序差动保护新判据 被引量:8
16
作者 翁汉琍 李昊威 +5 位作者 邢家维 林湘宁 黄景光 李振兴 刘雷 王胜 《电力自动化设备》 EI CSCD 北大核心 2019年第9期20-26,共7页
针对换流变压器零序差动保护误动现象,提出一种采用S变换相位差及能量相对熵算法的换流变零序差动保护新判据。通过分析换流变压器区内各类故障、区外故障及外部故障切除时零序电流的特点,利用零序差动保护两侧自产零序电流和中性线上... 针对换流变压器零序差动保护误动现象,提出一种采用S变换相位差及能量相对熵算法的换流变零序差动保护新判据。通过分析换流变压器区内各类故障、区外故障及外部故障切除时零序电流的特点,利用零序差动保护两侧自产零序电流和中性线上零序电流的相位和能量概率分布差异进行识别。当发生区外故障时,零序差动保护两侧零序电流的波形极为相似,其相位差和能量相对熵值都基本为0。当发生区内故障时,零序差动保护两侧零序电流相位相反且波形相似度小,其相位差接近180°且能量相对熵值增大。仿真验证表明,该判据可准确迅速识别区内与区外故障,其性能不受故障类型和过渡电阻的影响,且具有一定的抗电流互感器饱和的能力。 展开更多
关键词 换流变压器 继电保护 零序差动保护 s变换 相位差 能量相对熵
下载PDF
基于S变换暂态能量与方向的无整定配电网选线新方法 被引量:19
17
作者 陈豪威 王媛媛 +3 位作者 唐夏菲 殷惠 林成 黄路明 《电力系统保护与控制》 EI CSCD 北大核心 2018年第14期71-78,共8页
为了提高配电网单相接地故障时选线的准确性和可靠性,提出了一种基于S变换暂态能量与方向的无整定配电网选线新方法。通过S变换计算各条线路故障特征频率下的暂态能量参数与综合相角参数,利用欧氏距离算法融合二维信息得到每条线路的特... 为了提高配电网单相接地故障时选线的准确性和可靠性,提出了一种基于S变换暂态能量与方向的无整定配电网选线新方法。通过S变换计算各条线路故障特征频率下的暂态能量参数与综合相角参数,利用欧氏距离算法融合二维信息得到每条线路的特征距离,比较实时特征样本的故障距离和健全距离大小实现基于无整定保护判别的配电网故障选线。仿真结果表明,该方法受故障位置、故障合闸角、故障电阻、网络结构等因素影响较小,且判据裕度较高。该方法相比单一判据方法更加适用于结构复杂的配电网系统,同时不必人为规定继电器的动作特性,即无需人为设定判别整定值,具有很高的选线准确性和鲁棒性。 展开更多
关键词 s变换 暂态能量参数 综合相角参数 特征距离 无整定
下载PDF
非对称波瓣下外扩张角对S型喷管气动热力性能影响 被引量:4
18
作者 刘友宏 杜力伟 +3 位作者 李腾 邵万仁 徐速 邓洪伟 《推进技术》 EI CAS CSCD 北大核心 2015年第5期678-687,共10页
为了研究非对称波瓣下外扩张角对S型喷管气动热力性能的影响规律,以含非对称波瓣的S型喷管为研究对象,保持非对称波瓣长度、内扩张角、高宽比及上外扩张角不变,取定非对称波瓣下外扩张角依次为17.75°,22.75°,27.75°,32.7... 为了研究非对称波瓣下外扩张角对S型喷管气动热力性能的影响规律,以含非对称波瓣的S型喷管为研究对象,保持非对称波瓣长度、内扩张角、高宽比及上外扩张角不变,取定非对称波瓣下外扩张角依次为17.75°,22.75°,27.75°,32.75°,建立了一组具有不同下外扩张角的非对称波瓣S型喷管模型。通过数值求解Reynolds-Averaged Navier-Stokes(RANS)方程,得到了S型喷管气动热力性能随非对称波瓣下外扩张角的变化规律。研究结果表明:第一个弯道上游流场中,流向涡具有较强的混合能力,其核心区无量纲涡量值随非对称波瓣下外扩张角增大而逐渐增大;然而,在第一个弯道下游流场中,所有模型对应的流向涡核心区无量纲涡量值均已非常微弱。在S型喷管弯道区域,流道流向、截面形状发生巨大改变,使得内外涵流体混合效果显著提高,但混合流体的总压恢复系数却急剧下降。混合流体热混合效率值受下外扩张角影响不明显,但S型喷管下半部分内壁面温度随下外扩张角增大而逐渐上升。在S型喷管出口,下外扩张角为17.75°模型的总压恢复系数为0.9464,高于其他3种模型,并且相对于该截面上总压恢复系数最低值增加了0.55%。 展开更多
关键词 非对称波瓣 s型喷管 下外扩张角 流向涡 热混合效率 总压恢复系数
下载PDF
加装涡流发生器S形进气道迎角特性数值研究 被引量:1
19
作者 李大伟 马东立 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2013年第5期114-118,共5页
为了研究加装涡流发生器后S形进气道在不同来流迎角下的内流特性,利用CFD方法对加装涡流发生器前后的S形进气道迎角特性进行了数值仿真,首先通过在已有的S形进气道内部安装涡流发生器来改善出口流场分布,给出了涡流发生器的设计参数,包... 为了研究加装涡流发生器后S形进气道在不同来流迎角下的内流特性,利用CFD方法对加装涡流发生器前后的S形进气道迎角特性进行了数值仿真,首先通过在已有的S形进气道内部安装涡流发生器来改善出口流场分布,给出了涡流发生器的设计参数,包括导流叶片的高度、弦长、攻角和安装站位(轴向站位和横向站位),其次,分析了不同迎角下,加装涡流发生器前后S形进气道内流特性的变化.分析结果表明,在正负10°迎角范围内,加装涡流发生器都能够改善S形进气道出口流场品质,周向畸变指数平均下降0.1,但对出口总压恢复系数没有改善.在大迎角情况下,由于进口气流产生分离,涡流发生器已无法对来流进行有效的导向作用,从而导致出口流场变得异常紊乱,周向畸变指数陡增.这些分析结果对涡流发生器的设计有一定的指导意义. 展开更多
关键词 s形进气道 流场控制 涡流发生器 迎角特性
下载PDF
基于联合条件概率判决NLOS的数据融合定位算法 被引量:2
20
作者 胡磊 钟子发 康凯 《计算机工程与应用》 CSCD 北大核心 2010年第26期83-85,共3页
针对蜂窝移动通信定位技术中常见的非视距传播(NLOS)问题,提出了一种利用来波信号强度和来波方位角测量值的联合条件概率判决NLOS的算法(JCPDS-RA,joint conditional probability decision scheme with RSS and AOA),并将其与数据融合... 针对蜂窝移动通信定位技术中常见的非视距传播(NLOS)问题,提出了一种利用来波信号强度和来波方位角测量值的联合条件概率判决NLOS的算法(JCPDS-RA,joint conditional probability decision scheme with RSS and AOA),并将其与数据融合定位技术相结合,提高定位精度。推导了NLOS环境下RSS和AOA的条件概率密度模型,给出了JCPDS-RA算法和数据融合流程图,并进行了仿真实验,结果表明,该算法有效地提高了定位精度并有一定的普适性。 展开更多
关键词 非视距传播 数据融合 混合定位 来波信号强度 来波方位角
下载PDF
上一页 1 2 15 下一页 到第
使用帮助 返回顶部