In situ temperature measurement of vapor based on atomic speed selection

We demonstrate an experimental method for the in situ temperature measurement of atomic vapor using the saturated absorption spectrum. By separately manipulating the frequency of the pump and probe beams, the position of the crossover peaks can move along the spectrum. Different velocity classes of atoms contribute to the crossover during the movement. We study the relationship between the intensity change of peaks and vapor temperature. Our experimental result around room temperature shows a deviation of less than 0.3 K. Compared with traditional thermometry using absorption spectroscopy, higher accuracy can theoretically be achieved with real-time thermometry.

Revamping design of an EAF automatic temperature measurement and sampling robot

The function,features,and architecture of a robot that performs automatic temperature measurement and sampling applied on a 150-t AC electric arc furnace(EAF)production line of Baosteel were presented,and the key points of design and revamping experience on the site layout,device protection,lance tool,probe container,measuring position control,and system safety were summarized.Furthermore,a valuable reference for the application of automatic temperature measuring and sampling robots in EAF steelmaking plants will be provided.

Investigation on the plastic work-heat conversion coefficient of 7075-T651 aluminum alloy during an impact process based on infrared temperature measurement technology

The plastic work-heat conversion coefficient is one key parameter for studying the work-heat conversion under dynamic deformation of materials. To explore this coefficient of 7075-T651 aluminum alloy under dynamic compression, dynamic compression experiments using the Hopkinson bar under four groups of strain rates were conducted, and the temperature signals were measured by constructing a transient infrared temperature measurement system. According to stress versus strain data as well as the corresponding temperature data obtained through the experiments, the influences of the strain and the strain rate on the coefficient of plastic work converted to heat were analyzed.The experimental results show that the coefficient of plastic work converted to heat of 7075-T651 aluminum alloy is not a constant at the range of 0.85–1 and is closely related to the strain and the strain rate. The change of internal structure of material under high strain rate reduces its energy storage capacity, and makes almost all plastic work convert into heat.

Research on the Explosion Temperature Response of Fuel Air Explosive Measured by Colorimetric Pyrometer

An infrared colorimetric radiation thermometrical system was established based on the theory of optical radiation. The dynamic temperature history of fuel air explosive (FAE) was measured to obtain the temperature responses of primary initiation FAE and secondary initiation FAE in real time. And the characteristics of their temperature history curves were compared and analyzed. The results show that the primary initiation FAE has higher explosion temperature and longer duration compared to the secondary initiation FAE.

Spatial resolved temperature measurement based on absorption spectroscopy using a single tunable diode laser

A novel method based on wavelength-multiplexed line-of-sight absorption and profile fitting for nonuniform flow field measurement is reported. A wavelength scanning combing laser temperature and current modulation WMS scheme is used to implement the wavelength-multi- plexed-profile fitting method. Second harmonic （2f） signal of eight H20 transitions features near 7,170 cm^-1 are measured in one period using a single tunable diode laser. Spatial resolved temperature distribution upon a CH4/air premixed flat flame burner is obtained. The result validates the feasibility of strategy for non-uniform flow field diagnostics by means of WMS-2f TDLAS.

Research on the principle of space high-precision temperature control system of liquid crystals based Stokes polarimeter

The magnetic field is one of the most important parameters in solar physics,and a polarimeter is the key device to measure the solar magnetic field.Liquid crystals based Stokes polarimeter is a novel technology,and will be applied for magnetic field measurement in the first space-based solar observatory satellite developed by China,Advanced Space-based Solar Observatory.However,the liquid crystals based Stokes polarimeter in space is not a mature technology.Therefore,it is of great scientific significance to study the control method and characteristics of the device.The retardation produced by a liquid crystal variable retarder is sensitive to the temperature,and the retardation changes 0.09°per 0.10℃.The error in polarization measurement caused by this change is 0.016,which affects the accuracy of magnetic field measurement.In order to ensure the stability of its performance,this paper proposes a high-precision temperature control system for liquid crystals based Stokes polarimeter in space.In order to optimize the structure design and temperature control system,the temperature field of liquid crystals based Stokes polarimeter is analyzed by the finite element method,and the influence of light on the temperature field of the liquid crystal variable retarder is analyzed theoretically.By analyzing the principle of highprecision temperature measurement in space,a high-precision temperature measurement circuit based on integrated operational amplifier,programmable amplifier and 12 bit A/D is designed,and a high-precision space temperature control system is developed by applying the integral separation PI temperature control algorithm and PWM driving heating films.The experimental results show that the effect of temperature control is accurate and stable,whenever the liquid crystals based Stokes polarimeter is either in the air or vacuum.The temperature stability is within±0.0150℃,which demonstrates greatly improved stability for the liquid crystals based Stokes polarimeter.

The dating and temperature measurement technologies for carbonate minerals and their application in hydrocarbon accumulation research in the paleouplift in central Sichuan Basin, SW China

A new method for reconstructing the geological history of hydrocarbon accumulation is developed, which are constrained by U-Pb isotope age and clumped isotope((35)47) temperature of host minerals of hydrocarbon-bearing inclusions. For constraining the time and depth of hydrocarbon accumulation by the laser in-situ U-Pb isotope age and clumped isotope temperature, there are two key steps:(1) Investigating feature, abundance and distribution patterns of liquid and gaseous hydrocarbon inclusions with optical microscopes.(2) Dating laser in-situ U-Pb isotope age and measuring clumped isotope temperature of the host minerals of hydrocarbon inclusions. These technologies have been applied for studying the stages of hydrocarbon accumulation in the Sinian Dengying gas reservoir in the paleo-uplift of the central Sichuan Basin. By dating the U-Pb isotope age and measuring the temperature of clumped isotope((35)47) of the host minerals of hydrocarbon inclusions in dolomite, three stages of hydrocarbon accumulation were identified:(1) Late Silurian: the first stage of oil accumulation at(416±23) Ma.(2) Late Permian to Early Triassic: the second stage of oil accumulation between(248±27) Ma and(246.3±1.5) Ma.(3) Yanshan to Himalayan period: gas accumulation between(115±69) Ma and(41±10) Ma. The reconstructed hydrocarbon accumulation history of the Dengying gas reservoir in the paleo-uplift of the central Sichuan Basin is highly consistent with the tectonic-burial history, basin thermal history and hydrocarbon generation history, indicating that the new method is a reliable way for reconstructing the hydrocarbon accumulation history.

TEMPERATURE MEASUREMENT OF REFLECTED SHOCK WAVE BY USING CHEMICAL INDICATOR

This report describes a new method for measuring the temperature of the gas behind the reflected shock wave in shock tube, corresponding to the reservoir temperature of a shock tunnel, based on the chemical reaction of small amount of CF4 premixed in the test gas. The final product C2F4 is used as the temperature indicator, which is sampled and detected by a gas chromatography in the experiment. The detected concentration of C2F4 is correlated to the temperature of the reflected shock wave with the initial pressure P-1 and test time tau as parameters in the temperature range 3 300 K < T < 5 600 K, pressure range 5 kPa < P1 <12 kPa and tau similar or equal to 0.4 ms.

A technique utilizing chemical reagents for direct measurement of temperature at a local area and its engineering applications

Temperature is one of the physical quantifies through which quantitative evaluation of the safety and reliability of industrial products can be achieved, and this has been used widely in practice. Under any environmental condifion, regardless of the size of the object to be inspected, accurate and reliable measurement of temperature is of great practical importance. This review article presents a simple and direct method of temperature measurement, that can be applied to the local areas with difficulty in measuring the temperature by using normal thermometers. In the present article, two different application examples are demonstrated. One addresses the study of the electromigration of solders which are used as bonding metals in electronic devices （micro-structures）. The application of the method to the shaft of a motor used in heavy industrial fields is explained as the second.

Inter-stage line ratio of He- and Li-like Ti emissions for the electron temperature measurement

Under coronal conditions, the steady state rate-equations are used to calculate the inter-stage line ratios between Li-like ls22p(2P3/2)→ls22s(2S1/2) and He-like ls2p(1P1)→1s2(1S0) transitions for Ti in the electronic temperature ranges from 0.1keV to 20 keV. The results show that the temperature sensitivities are higher at the electronic temperature less than 5000 eV and the temperature sensitivities will decrease with the increase of electronic temperature.

Effect Factors on Measurement Precision of the Embedded Temperature Sensing Fabric

The embedded temperature sensing fabric was designed and woven according to the heat transmission model of the fabric.The temperature sensors were embedded into the multi-layered fabric that weft yarns were high-shrinkage polyester filaments.And the fabric was treated by a self-designed partial heat device,which can make the sensor be fixed in the fabric.The effects of yarn type,yarn linear density,fabric warp density,fabric structure,fabric layer numbers where the sensor is located,and the ambient temperature on the temperature measured value were investigated.The results demonstrated that when the higher thermal conductivity of yarns and lower density yarns were applied in the fabric as rawmaterials,they were favored to improve the measurement precision.Meanwhile,there were many factors that could make the measured values closer to the real value of the body,such as the plain fabric,the increased warp density of the fabric,the multiple-layer fabric where the sensor was located,the raised ambient testing temperature and the prolonged test time in the certain range.

Fast-Response Fiber-Optic FPI Temperature Sensing System Based on Modulated Grating Y-Branch Tunable Laser

In this paper,a cost-effective and miniaturized instrument is proposed,which is based on a tunable modulated grating Y-branch(MG-Y)laser for rapid temperature measurement using a Fabry-Perot interferometer(FPI)sensor.The FPI sensor with a 1463-μm cavity length is a short segment of a capillary tube sandwiched by two sections of single-mode fibers(SMFs).This system has a broad tunable range(1527 nm-1567 nm)with a wavelength interval of 8 pm and a tuning rate of 100 Hz.Temperature sensing experiments are carried out to investigate the performance of the system by demodulating the absolute cavity length of the FPI sensor using a cross-correlation algorithm.Experimental results show that the sensor can reach the response time as short as 94 ms with the sensitivity of 802 pm/C.Benefiting from the homemade and integrated essential electrical circuits,the entire system has the small size,low cost,and practical application potential to be used in the harsh environment for rapid temperature measurement.

Fever assessment in children under five: Are we following the guidelines?

BACKGROUND Fever is a common cause of medical consultation and hospital admission,particularly among children.Recently,the United Kingdom’s National Institute for Health and Care Excellence(NICE)updated its guidelines for assessing fever in children under five years of age.The efficient assessment and management of children with fever are crucial for improving patient outcomes.AIM To evaluate fever assessment in hospitalized children and to assess its adherence with the NICE Fever in under 5s guideline.METHODS We conducted a retrospective cohort review of the electronic medical records of children under five years of age at the Department of Pediatrics,Salmaniya Medical Complex,Bahrain,between June and July 2023.Demographic data,vital signs during the first 48 h of admission,route of temperature measurement,and indications for admission were gathered.Fever was defined according to the NICE guideline.The children were divided into five groups according to their age(0-3 months,>3-6 months,>6-12 months,>12-36 months,and>36-60 months).Patients with and without fever were compared in terms of demography,indication for admission,route of temperature measurement,and other vital signs.Compliance with the NICE Fever in the under 5s guideline was assessed.Full compliance was defined as>95%,partial compliance as 70%-95%,and minimal compliance as≤69%.Pearson’sχ^(2),Student’s t test,the Mann-Whitney U test,and Spearman’s correlation coefficient(rs)were used for comparison.RESULTS Of the 136 patients reviewed,80(58.8%)were boys.The median age at admission was 14.2[interquartile range(IQR):1.7-44.4]months,with the most common age group being 36-60 months.Thirty-six(26.4%)patients had fever,and 100(73.6%)were afebrile.The commonest age group for febrile patients(>12-36 months)was older than the commonest age group for afebrile patients(0-3 months)(P=0.027).The median weight was 8.3(IQR:4.0-13.3)kg.Patients with fever had higher weight than those without fever[10.2(IQR:7.3-13.0)vs 7.1(IQR:3.8-13.3)kg,respectively](P=0.034).Gastrointestinal disease was the leading indication for hospital admission(n=47,34.6%).Patients with central nervous system diseases and fever of unknown etiology were more likely to be febrile(P=0.030 and P=0.011,respectively).The mean heart rate was higher in the febrile group than the afebrile group(140±24 vs 126±20 beats per minute,respectively)[P=0.001(confidence interval:5.8-21.9)]with a positive correlation between body temperature and heart rate,r=0.242,n=136,P=0.004.A higher proportion of febrile patients received paracetamol(n=35,81.3%)compared to the afebrile patients(n=8,18.6%)(P<0.001).The axillary route was the most commonly used for temperature measurements(n=40/42,95.2%),followed by the rectal route(n=2/42,4.8%).The department demonstrated full compliance with the NICE guideline for five criteria:the type of thermometer used,route and frequency of temperature measurement,frequency of heart rate measurement,and use of antipyretics as needed.Partial compliance was noted for two criteria,the threshold of fever at 38°C or more,and the respiratory rate assessment in febrile patients.Minimal compliance or no record was observed for the remaining three criteria;routine assessment of capillary refill,temperature reassessment 1-2 h after each antipyretic intake,and refraining from the use of tepid sponging.CONCLUSION This study showed that fever assessment in hospitalized children under five years of age was appropriate,but certain areas of adherence to the NICE guideline still need to be improved.

On the Thermal Distribution in Oncological Hyperthermia Treatments

The temperature is one of the principal controlling parameters of oncological hyperthermia. However, local heating forms a complicated thermal distribution in space and has developed over time, too. The decisional factors are the heterogeneity of the targeted volume, the electrolyte perfusions controlled by thermal homeostasis, and the spreading of the heat energy with time. A further complication is that the energy absorption sharply changes by depth, so the spatiotemporal development of the temperature distribution requires specialized methods to control. Most of the temperature imaging facilities (thermography, radiometry, electric impedance tomography, etc.) are less precise than the medical practice needs. In contrast, precise point sensing (like thermocouples, thermistors, and fluoroptical methods) is invasive and measures only a discrete point in the robustly changing thermal map. The two most precise thermal imaging methods, computer tomography, and magnetic resonance are expensive and have numerous technical complications. Our objective is to show the complexity of the temperature distribution inside the human body, and offer a relatively simple and cheap method to visualize its spatiotemporal development. A novel emerging technology, the application of ultrasound microbubble contrast agents is a promising method for solving complicated tasks of thermal distribution deep inside the living body. Noteworthy, the temperature distribution does not determine the full hyperthermia process, nonthermal effects make considerable impact, too. Additionally to the difficulties to measure the thermal heterogeneity during hyperthermia in oncology, numerous nonthermal processes, molecular and structural changes are triggered by the incoming electromagnetic energy, which presently has no spatiotemporal visualization technique. Microbubble imaging has a suitable spatiotemporal thermal resolution, and also it is sensitive to nonthermal effects. Its application for characterization of the modulated electrohyperthermia (mEHT) may open a new theranostic facility, using the synergy of the thermal and nonthermal effects of the radiofrequency delivered energy. This complex approach gives facility to follow the mEHT processes, and the proposed microbubble ultrasound imaging has a particularly promising advantage sensing and acting also nonthermally, having potential to characterize the thermally conditioned nonthermal electromagnetic effects in oncologic hyperthermia. The mEHT combined with microbubble ultrasound images could be a robust theranostic method against cancer.

Rock temperature variability in high-altitude rockfall-prone areas

In a context of cryosphere degradation caused by climate warming,rock temperature is one of the main driving factors of rockfalls that occur on high-elevation mountain slopes.In order to improve the knowledge of this critical relationship,it is necessary to increase measurement capability of rock temperature and its variability in different lithological and slope/aspect conditions,and also to increase local scale studies,increasing the quality and the comparability of the data.This paper shows an example of metrological characterization of sensors used for rock temperature measurement in mountain regions,by means of the measurement uncertainty.Under such approach,data and results from temperature measurements carried out in the Bessanese high-elevation experimental site(Western European Alps)are illustrated.The procedures for the calibration and field characterization of sensors allow to measure temperature in different locations,depths and lithotypes,within 0.10°C of overall uncertainty.This work has highlighted that metrological traceability is fundamental to asses data quality and establish comparability among different measurements;that there are strong differences between air temperature and near-surface rock temperature;and that there are significant differences of rock temperature acquired in different aspect conditions.Finally,solar radiation,slope/aspect conditions and lithotype,seem to be the main driving factors of rock temperature.

Comparison of TMI and AMSR-E sea surface temperatures with Argo near-surface temperatures over the global oceans

Satellite-derived sea surface temperatures（SSTs） from the tropical rainfall measuring mission（TRMM）microwave imager（TMI） and the advanced microwave scanning radiometer for the earth observing system（AMSR-E） were compared with non-pumped near-surface temperatures（NSTs） obtained from Argo profiling floats over the global oceans. Factors that might cause temperature differences were examined, including wind speed, columnar water vapor, liquid cloud water, and geographic location. The results show that both TMI and AMSR-E SSTs are highly correlated with the Argo NSTs; however, at low wind speeds, they are on average warmer than the Argo NSTs. The TMI performs slightly better than the AMSR-E at low wind speeds, whereas the TMI SST retrievals might be poorly calibrated at high wind speeds. The temperature differences indicate a warm bias of the TMI/AMSR-E when columnar water vapor is low, which can indicate that neither TMI nor AMSR-E SSTs are well calibrated at high latitudes. The SST in the Kuroshio Extension region has higher variability than in the Kuroshio region. The variability of the temperature difference between the satellite-retrieved SSTs and the Argo NSTs is lower in the Kuroshio Extension during spring. At low wind speeds, neither TMI nor AMSR-E SSTs are well calibrated, although the TMI performs better than the AMSR-E.

High-precision nuclear magnetic resonance probe suitable for in situ studies of high-temperature metallic melts

High-temperature nuclear magnetic resonance(NMR)has proven to be very useful for detecting the temperatureinduced structural evolution and dynamics in melts.However,the sensitivity and precision of high-temperature NMR probes are limited.Here we report a sensitive and stable high-temperature NMR probe based on laser-heating,suitable for in situ studies of metallic melts,which can work stably at the temperature of up to 2000 K.In our design,a well-designed optical path and the use of a water-cooled copper radio-frequency(RF)coil significantly optimize the signal-to-noise ratio(S/NR)at high temperatures.Additionally,a precise temperature controlling system with an error of less than±1 K has been designed.After temperature calibration,the temperature measurement error is controlled within±2 K.As a performance testing,^(27)Al NMR spectra are measured in Zr-based metallic glass-forming liquid in situ.Results show that the S/NR reaches 45 within 90 s even when the sample's temperature is up to 1500 K and that the isothermal signal drift is better than0.001 ppm per hour.This high-temperature NMR probe can be used to clarify some highly debated issues about metallic liquids,such as glass transition and liquid-liquid transition.

Shock temperature and reflectivity of precompressed H2O up to 350 GPa:Approaching the interior of planets

Using a combination of static precompression and laser-driven shock compression, shock temperature and reflectivity of H2O have been measured up to 350 GPa and 2.1×10~4 K. Here, two calibration standards were applied to enhance temperature measurement reliability. Additionally, in temperature calculations, the discrepancy in reflectivity between active probe beam wavelength and self-emission wavelength has been taken into account to improve the data’s precision.Precompressed water’s temperature–pressure data are in very good agreement with our quantum molecular dynamics model,suggesting a superionic conductor of H2O in the icy planets’ deep interior. A sluggish slope gradually approaching Dulong–Petit limit at high temperature was found at a specific heat capacity. Also, high reflectivity and conductivity were observed at the same state. By analyzing the temperature–pressure diagram, reflectivity, conductivity and specific heat comprehensively at conditions simulating the interior of planets in this work, we found that as the pressure rises, a change in ionization appears; it is supposedly attributed to energetics of bond-breaking in the H2O as it transforms from a bonded molecular fluid to an ionic state. Such molecular dissociation in H2O is associated with the conducting transition because the dissociated hydrogen atoms contribute to electrical properties.

Numerical investigation on the flow characteristics of a reverse-polarity plasma torch by two-temperature thermal non-equilibrium modelling

A two-temperature(2 T)thermal non-equilibrium model is developed to address the thermal nonequilibrium phenomenon that inevitably exists in the reverse-polarity plasma torch(RPT)and applied to numerically investigate the plasma flow characteristics inside and outside the RPT.Then,a detailed comparison of the results of the 2 T model with those of the local thermal equilibrium(LTE)model is presented.Furthermore,the temperature of the plasma jet generated by a RPT and the RPT’s voltage are experimentally measured to compare and validate the result obtained by different models.The differences of the measured excitation temperature and the arc voltage between the 2 T model and experimental measurement are less than 13%and 8%,respectively,in all operating cases,validating the effectiveness of the 2 T model.The LTE model overestimates the velocity and temperature distribution of the RPT and its plasma jet,showing that thermal non-equilibrium phenomena cannot be neglected in the numerical modelling of the RPT.Unlike other common hot cathode plasma torches,the thermal non-equilibrium phenomenon is found even in the arc core of the RPT,due to the strong cooling effect caused by the big gas flow rate.

Rail temperature variation under heavy haul operations

There currently does not exist in industry a reliable method for the detection of rail foot flaws.Like their head-based counterparts,foot flaws result in broken rail with potentially catastrophic consequences.A proposed area of research for the detection of these flaws is thermography,a non-contact method of measuring and analysing infrared emissions from an object under test.In industry,active excitation thermography is the most common,requiring an excitation source.This paper will present a temperature measurement system and a method of transient temperature extraction from the running rails for the effects of a passing train to evaluate heat transfer in the practical rail environment.The outcomes of these results will provide future direction in the development of a rail heat transfer model and determine if train passage provides enough active excitation for a thermography-based detection technique.