Determination of velocity correction factors for real-time air velocity monitoring in underground mines

When there are installations of air velocity sensors in the mining industry for real-time airflow monitoring, a problem exists with how the monitored air velocity at a fixed location corresponds to the average air velocity, which is used to determine the volume flow rate of air in an entry with the cross-sectional area. Correction factors have been practically employed to convert a measured centerline air velocity to the average air velocity. However, studies on the recommended correction factors of the sensor-measured air velocity to the average air velocity at cross sections are still lacking. A comprehensive airflow measurement was made at the Safety Research Coal Mine, Bruceton, PA, using three measuring methods including single-point reading, moving traverse, and fixed-point traverse. The air velocity distribution at each measuring station was analyzed using an air velocity contour map generated with Surfer~. The correction factors at each measuring station for both the centerline and the sensor location were calculated and are discussed.

Interpretation of diagnosis and treatment scheme of COVID-19 in Hunan province (the third trial version) based on three factors and measures

The similarities and differences between"Novel Coronavirus Infected pneumonia in Hunan province(trial second edition)"and"Novel Coronavirus Infected pneumonia(Trial seventh edition)"released by the National Health Commission and their ideas were interpreted based on"suiting measures to three factors".①In Hunan program,the third version of the trial adjustment more suitable for local characteristics of the disease;②The prevention program population classification is clear,support,eliminate pathogenic factors of the primary and secondary distinct;③The cause of disease is prominent,damp and toxin are mixed with dryness,and the treatment is mainly to moisten the lung and clear away heat,and the prescription is mostly Xinliang light agent.

Impact factors and improvement measures of enviroment quality in cleaning operating room

Objective To analyze the factors that impact the environment quality of cleaning operating room and to discuss improvement measurement. Methods Environment bacteria testing results and prevalence of surgical incision infection in cleaning operating room were retro-

血浆内毒素定量测定及在感染性疾病中的应用

目的 :初步建立血浆内毒素定量检测模式 ,提出健康人群血浆内毒素正常值及内毒素血症诊断参考值。方法 :用稀释加热法排除血浆干扰 ,以弃G因子鲎试剂在BET 16细菌内毒素测定仪下检测被试者血浆内毒素水平 ,并将结果与临床病原微生物培养比较。结果 :该法强化内毒素回收率 5 0 %～ 15 0 % ,符合美国FDA 1987年版要求。在临床感染 91例患者中 ,内毒素血症 3 7例 ,全部分离出 >1株的G-杆菌 ,其余 5 4例血浆内毒素正常的患者中 ,只有 5例分离出G-杆菌。结论 :该法快速 ,简便 。

Industrial Green Spatial Pattern Evolution of Yangtze River Economic Belt in China

We use the directional slacks-based measure of efficiency and inverse distance weighting method to analyze the spatial pattern evolution of the industrial green total factor productivity of 108 cities in the Yangtze River Economic Belt in 2003–2013.Results show that both the subprime mortgage crisis and ‘the new normal' had significant negative effects on productivity growth,leading to the different spatial patterns between 2003–2008 and 2009–2013.Before 2008,green poles had gathered around some capital cities and formed a tripartite pattern,which was a typical core-periphery pattern.Due to a combination of the polarization and the diffusion effects,capital cities became the growth poles and ‘core' regions,while surrounding areas became the ‘periphery'.This was mainly caused by the innate advantage of capital cities and ‘the rise of central China' strategy.After 2008,the tripartite pattern changed to a multi-poles pattern where green poles continuously and densely spread in the midstream and downstream areas.This is due to the regional difference in the leading effect of green poles.The leading effect of green poles in midstream and downstream areas has changed from polarization to diffusion,while the polarization effect still leads in the upstream area.

Field Investigation and FEM Analysis of Ground Subsidence in a Chinese Underground Gold Mine

Ground subsidence in a Chinese underground gold mine is remarkable. To find out reasons and regularities of the subsidence, following research work was carried out: (1) systemetical investigations of engineering geological conditions, including in situ stress sta- te, locstion and size of old river beds, ponds and unfilled mined-out areas, (2) in situ monitoring of strata movement by multi-point ex tensometers in 3 vertical boreholes; (3) FEM (Finite Element Method) analysis to study the relationship between the ground subsidence and mining excavation, especially to inspect the influence of unfilled mined-out areas at shallow depth on the subsidence. Based on the research results, measures to control the ground subsidence and to prevent buildings from damage are provided.

A high quality factor photonic crystal channel-drop filter with a linear gradient microcavity

We design a channel-drop filter(CDF)with a linear gradient microcavity in a two-dimensional(2D)photonic crystal(PC).The model of three-port CDF with reflector is used to achieve high quality factor(Q-factor)and 100%channel-drop efficiency.The research indicates that adjusting the distance between reference plane and reflector can simultaneously influence the Q-factor due to coupling to a bus waveguide and the phase retardation occurring in the round trip between a microcavity and a reflector.The calculation results of 2D finite-difference time-domain(FDTD)method show that the designed filter can achieve the drop efficiency of 96.7%and ultra-high Q-factor with an ultra-small modal volume.

Development of database of real-world diesel vehicle emission factors for China

A database of real-world diesel vehicle emission factors, based on type and technology, has been developed following tests on more than 300 diesel vehicles in China using a portable emission measurement system. The database provides better understanding of diesel vehicle emissions under actual driving conditions. We found that although new regulations have reduced real-world emission levels of diesel trucks and buses significantly for most pollutants in China, NOx emissions have been inadequately controlled by the current standards, especially for diesel buses, because of bad driving conditions in the real world. We also compared the emission factors in the database with those calculated by emission factor models and used in inventory studies. The emission factors derived from COPERT（Computer Programmer to calculate Emissions from Road Transport） and MOBILE may both underestimate real emission factors, whereas the updated COPERT and PART5（Highway Vehicle Particulate Emission Modeling Software） models may overestimate emission factors in China. Real-world measurement results and emission factors used in recent emission inventory studies are inconsistent,which has led to inaccurate estimates of emissions from diesel trucks and buses over recent years. This suggests that emission factors derived from European or US-based models will not truly represent real-world emissions in China. Therefore, it is useful and necessary to conduct systematic real-world measurements of vehicle emissions in China in order to obtain the optimum inputs for emission inventory models.

Recent progress in AMS measurement of ^(182)Hf at the CIAE

In order to improve the accuracy of accelerator mass spectrometry （AMS） measurement for 182Hf/180Hf, a series of measurements have been taken in the AMS laboratory at the China Institute of Atomic Energy （CIAE）. The major ones include the instantaneous monitoring of 180HfF5- current, testing the stability of transmission, the alternate measurements of an unknown sample and standard, and the origin identification and minimization of background 182W. The experimental details and the improvement in the measurement accuracy, as well as some useful suggestions for better satisfying the requirements of certain practical applications, are presented in this paper.

Responses of Grassland Net Primary Productivity to Environmental Variables in Northern China

Various environmental factors affect net primary productivity （NPP） of grassland ecosystem. Extensive reports on the effects of environmental variables on NPP can be found in literature. However, the agreement on the relative importance of various factors in shaping the spatial pattern of grassland NPP has not yet been reached. Here a grassland in situ NPP database comprising 602 samples in northern China for 1980-1999 was developed based on a literature review of published biomass and forage yield field measurements. Correlation analyses and dominance analysis were used to quantify the separate and combined effects of environmental variables （climate topography and soil） on spatial variation in NPP separately. Grassland NPP ranged from 4.76 g C m-2a-1 to 975.94gCm-2a-1, showing significant variations in space. NPP increased with annual precipitation and declined with annual mean temperature significantly. Specifically, precipitation had the greatest impact on deserts, followed by steppes and meadows. Grassland NPP decreased with increasing altitude because of water limitation, and positively correlated with slope, but weakly correlated with aspect. Soil quality showed positive effects on NPP. Annual precipitation was the dominant factor affecting the spatial variability of net primary productivity, followed by elevation.

Resonating properties of passive spherical optical microcavities

As an optically pumped device, the lasing characteristics of a spherical microcavity laser depend on the optical pumping processes. These characteristics can be described in term of the Q factor and the optical field distribution in a microsphere. We derived analytical expressions and carried out numerical calculation for Q factor and optical field. The Q factor is found to be oscillatory functions of the radius of a microsphere and the pumping wavelength, and the pumping efficiency for a resonating microsphere is much higher than that for an anti-resonating microsphere. Using tunable lasers as pumping sources is suggested in order to achieve a higher pumping efficiency. Numerical calculation on optical field distribution in spherical microcavities shows that a well focused Gaussian beam is a suitable incident wave for cavity quantum electrodynamics experiments in which strong confinement of optical field in the center of a microsphere is requested, but higher order spherical wave should be used instead for exciting whispering-gallery-mode (WGM) microsphere lasers, for the purpose of favoring optical energy transferring to WGM in optical microspheres.

All-optical wavelength conversion based on nonlinear polarization rotation (NPR) in SOA and AWG filtering

An all-optical wavelength converter, based on nonlinear polarization rotation （NPR） in semiconductor optical amplifier （SOA） and array waveguide grating （AWG） filtering, is experimentally demonstrated. The wavelength converter can provide excellent operation including extinction ratio and Q factor. The simultaneous two wavelength conversion outputs are successfully obtained at 20 Gb/s.

Dynamic quality of transmission optimization and global impairments control in reconfigurable transparent WDM networks:schemes and demonstrations

Two novel dynamical quality of transmission （QoT） optimization schemes with explicit optimization targets and accurate end-to-end QoT estimation are proposed for reconfigurable transparent wavelength-division multiplexing （WDM） networks. Numerical simulations show that the scheme of quality （Q） best has the best Q factor improvement with large attenuation adjustment. The scheme of Q allowable can achieve minimized number of tuning sites and attenuation adjustment and also improve the Q factor of light path to the required value. In addition, the idea of dynamic QoT optimization and global impairment control has been experimentally demonstrated on a simple mesh network by the cooperation of a control plane and tunable devices.

RZ-OOK to NRZ-OOK format conversion based on a single fiber Bragg grating

We propose a return-to-zero on-off keying （RZ-OOK） to non-return-to-zero （NRZ） OOK conversion scheme based on a single custom-designed fiber Bragg grating （FBG）. The custom-made FBG is designed and synthesized using discrete layer-peeling algorithm. It is shown that such a FBG can replace the combination of interferometer and the cascaded filter that are invariably employed together in the reported schemes for RZ-OOK to NRZ-OOK format conversion. Simulation results show that the input 20-Gb/s RZ-OOK signals with different duty cycles can be converted into NRZ-OOK signals with high Q-factor.

Room-temperature light emission from an airbridge double-heterostructure microcavity of Er-doped Si photonic crystal

We experimentally demonstrate an efficient enhancement of luminescence from two-dimensional(2D) hexagonal photonic crystal(PC) airbridge double-heterostructure microcavity with Er-doped silicon(Si) as light emitters on siliconon-insulator(SOI) wafer at room temperature.A single sharp resonant peak at 1 529.6 nm dominates the photoluminescence(PL) spectrum with the pumping power of 12.5 m W.The obvious red shift and the degraded quality factor(Q-factor) of resonant peak appear with the pumping power increasing,and the maximum measured Q-factor of 4 905 is achieved at the pumping power of 1.5 m W.The resonant peak is observed to shift depending on the structural parameters of PC,which indicates a possible method to control the wavelength of enhanced luminescence for Si-based light emitters based on PC microcavity.