Intrinsic background radiation of LaBr3(Ce)detector via coincidence measurements and simulations

The LaBr3(Ce)detector has attracted much attention in recent years because of its superior characteristics compared with other scintillating materials in terms of resolution and efficiency.However,it has a relatively high intrinsic background radiation because of the naturally occurring radioisotopes in lanthanum,actinium,and their daughter nuclei.This limits its applications in low-counting rate experiments.In this study,we identified the radioactive isotopes in theφ3"x 3"Saint-Gobain B380 detector by a coincidence measurement using a Clover detector in a low-background shielding system.Moreover,we carried out a Geant4 simulation of the experimental spectra to evaluate the activities of the main internal radiation components.The total activity of the background radiation of B380 is determined to be 1.523(34)Bq/cm^3.The main sources include 138La at 1.428(34)Bq/cm^3,207Tl at 0.0135(13)Bq/cm^3,211Bi at 0.0136(15)Bq/cm^3,215Po at 0.0135(3)Bq/cm^3,219Rn at 0.0125(12)Bq/cm^3,223Fr at 0.0019(11)Bq/cm^3,223Ra at 0.0127(10)Bq/cm^3,227Th at 0.0158(22)Bq/cm^3,and 227Ac at 0.0135(13)Bq/cm^3.Of these,the activities of 207Tl,211Po,215Po,223Fr,and 227Ac are deduced for the first time from the secular equilibrium established in the decay chain of 227Ac.

Radiation Damage Analysis of Individual Subcells for GaInP/GaAs/Ge Solar Cells Using Photoluminescence Measurements

The radiation damage of three individual subcells for GalnP/GaAs//Ge triple-junction solar cells irradiated with electrons and protons is investigated using photoluminescence （PL） measurements. The PL spectra of each subcell are obtained using different excitation lasers. The PL intensity has a fast degradation after irradiation, and decreases as the displacement damage dose increases. Furthermore, the normalized PL intensity varying with the displacement damage dose is analyzed in detail, and then the lifetime damage coefficients of the recombination centers for GaInP top-cell, GaAs mid-cell and Ge bottom-cell of the triple-junction solar cells are determined from the PL radiative efficiency.

Ensuring Uniformity of Measurements of Absorbed Doses of Intensive Photon and Electron Radiation in Radiation Technologies

Ensuring reliability and traceability of the unit of absorbed dose of intense photon and electron radiation, used in radiation technologies in industry, is based on the creation of a system of sample measures and methods of transmission with minimal loss of dimensional accuracy of the unit of absorbed dose from the sample tools to working dosimeters and is a necessary basis of yield growth, of increase of labour productivity and the introduction of innovative products. The measuring capabilities of the State primary special standard of power unit of absorbed dose of intensity photon, electron and beta radiation for radiation technologies and of the standards of the absorbed dose of photon and electron radiation, used for radiation monitoring of radiation pro- cesses.

Environmental Radiation Measurement and Assessment of Natural Radioactivity in Soil, Water and Vegetation

Environmental radioactivity is produced by radioactive materials in the human environment. While some radioisotopes, such as strontium-90 (90Sr) and technetium-99 (99Tc), are only found on Earth as a result of human activity, and some, like potassium-40 (40K), are only present due to natural processes, a few isotopes, e.g. tritium (3H), result from both natural processes and human activities. The concentration and location of some natural isotopes, particularly uranium-238 (238U), can be affected by human activity because of the constant exposure of Human beings to radiation caused by terrestrial, extra-terrestrial and anthropogenic radio nuclides, it is necessary to determine and estimate the activity of various radio nuclides in environmental media such as vegetation, soil, and water. In the present research, the activities of 226Ra, 232Th and 40K are measured in soil, vegetation and water samples, collected from Yangdong District, Yangxi County, and Yangjiang County of Guangdong Province, China using an HPGe based gamma spectrometry system. The measured mean activity of 226Ra, 232Th and 40K in soil samples was found to be 31.19 ± 1.2, 47.00 ± 2.30 and 589.31 ± 17.52 Bqkg-1, respectively. The measured mean activity of these radionuclides in all water samples was found to be below minimum detectable activity. The measured mean activity of 226Ra, 232Th and 40K in vegetation samples was 19.92 ± 3.09, 25.36 ± 8.11 and 4982.94 ± 85.68 Bqkg-1, respectively. No anthropogenic 137Cs was detected in these environmental samples. Mean radium equivalent activity (Raeq), external radiation hazard index (Hex), internal radiation hazard index (Hin) and absorbed dose rate (D) for the area under study were determined as 142.92 Bqkg-1, 0.38, 0.47 and 66.47 nGyh-1, respectively. The annual effective dose equivalent (AEDE) varied in the range from 0.03 to 0.12 mSvy-1. It is concluded that the surveyed area do not pose any significant radiological risk to the population and environment.

Analysis of The Current Cituation of Solar Radiation Measurement

This paper mainly discusses the development status of solar radiation measurement technology,it expounds the relevant content of the current world radiation measurement datum and its standardization. Article the direct radiation from the sun,the main measuring principle of total radiation and scattering radiation,this paper discusses the different types of radiation survey measuring elements,measuring range,emphasis and the current widespread use of measurement instruments. The development trend of future solar radiation measurement is put forward,and it is emphasized that nanotechnology and spectrum technology will become the focus of solar radiation instrument research and development.

The definition analyses of radiation temperature measurement area

In the research of primary spectrum pyrometry, this paper discussed the definition problem of radiation temperature measurement area based on the measurement coordinates. For the linear spectrum emissivity model and improved monotonic spectrum emissivity model, the characteristics of radiation temperature measurement area restricted by the measurement coordinates were theoretically analyzed, through the investigations of the temperature and emissivity coordinate axes. Choosing the specific primary spectrum pyrometer as an example in applications, the theoretical area of radiation temperature measurement of this pyrometer was given and it was verified through blackbody experiments. The discussions of this paper will provide the necessary foundation for the theory research development of primary spectrum pyrometry and the realization of technical applications.

Measurements of non-equilibrium and equilibrium temperature behind a strong shock wave in simulated martian atmosphere

Non-equilibrium radiation measurements behind strong shock wave for simulated Martian atmosphere are presented in this paper. The shock wave is established in a hydrogen oxygen combustion driven shock tube. Time- resolved spectra of the Av = 0 sequence of the B^2∑^＋ → X^2∑^＋ electronic transition of CN have been observed through optical emission spectroscopy （OES）. A new method, which is based on fitting high resolution spectrum for rotational and vibrational temperatures measurement, is proposed to diag- nose temperature distribution behind the shock wave. It is estimated that the current scheme has the maximum deviation less than 8% （lσ） for vibrational temperature measurement through detailed analysis of the influence of the uncertainties of spectroscopic constants and spectral resolution. Radiation structure of the shock layer, including induction, relaxation and equilibrium process, and corresponding rotational and vibrational temperatures are obtained through time gating OES diagnostics with sub-microsecond temporal resolution. The present extensive results will strongly benefit the reaction rate estimation and computational fluid dynamics （CFD） code validation in high enthalpy Mars reentry chemistry.

Estimation of Hourly and Daily Global Solar Radiation at Clear Days Using an Approach Based on Modified Version of Gaussian Distribution

The performance of two models,Jam and Baig,based on the modified version of Gaussian distribution function in estimating the daily total of global solar radiation and its distribution through the hours of the day from sunrise to sunset al any clear day is evaluated with our own measured data in the period from June 1992 to May 1993 in Qena Egypt The results show a high relative deviation of calculated values from measured ones,especially for Jain model,in the most hours of the day,except for those near to local noon.This misfit behavior is quite obvious in the early morning and late afternoon A new approach has been proposed in this paper to estimate the daily and hourly global solar radiation This model performs with very high accuracy on the recorded data in our region.The validity of this approach was verified with new measurements in some clear days in June and August 1994.The resultant very low relative deviation of the calculated values of global solar radiation from the measured ones confirms the high performance of the approach proposed in this work

Simultaneous estimation of aerosol optical constants and size distribution from angular light-scattering measurement signals

The angular light-scattering measurement（ALSM） method combined with an improved artificial bee colony algorithm is introduced to determine aerosol optical constants and aerosol size distribution（ASD） simultaneously. Meanwhile, an optimized selection principle of the ALSM signals based on the sensitivity analysis and principle component analysis（PCA）is proposed to improve the accuracy of the retrieval results. The sensitivity analysis of the ALSM signals to the optical constants or characteristic parameters in the ASD is studied first to find the optimized selection region of measurement angles. Then, the PCA is adopted to select the optimized measurement angles within the optimized selection region obtained by sensitivity analysis. The investigation reveals that, compared with random selection measurement angles, the optimized selection measurement angles can provide more useful measurement information to ensure the retrieval accuracy. Finally,the aerosol optical constants and the ASDs are reconstructed simultaneously. The results show that the retrieval accuracy of refractive indices is better than that of absorption indices, while the characteristic parameters in ASDs have similar retrieval accuracy. Moreover, the retrieval accuracy in studying L-N distribution is a little better than that in studying Gamma distribution for the difference of corresponding correlation coefficient matrixes of the ALSM signals. All the results confirm that the proposed technique is an effective and reliable technique in estimating the aerosol optical constants and ASD simultaneously.

Spectral measurements of hypervelocity flow in an expansion tunnel

Atmospheric reentry vehicles and planetary probes fly through the atmosphere at hypervelocity speed. At such speed, there is a significant proportion of heat load to the vehicle surface due to radiative heating. Accurate prediction needs a good knowledge of the radiation spectrum properties. In this paper, a high-speed camera and spectrograph coupled to an intensified charge-coupled device have bee n impleme nted to inv estigate the rad i at io n flow over a semi-cylinder model. The experiments were carried out in the JF16 expansi on timnel with secondary shock velocity of 7.9 km·s^-1. Results show that the emissio n spectrum comprises several atomic lines and molecular band systems. We give detailed data of the radiation spectrum, shock shape, shock detached distance and radiation intensity varying with space and wavelength. This valuable experimental dataset will be helpful to validate computational fluid dynamics codes and radiation models, which equates to increased prediction accuracy of radiation heating. Also, some suggestions for spectral measurement in hypervelocity flow field were list in the end.

Application study of the awning measure to obstruct solar radiation in permafrost regions on the Qinghai-Tibet Plateau

With globe warming, road safety will change dramatically, especially within the Qinghai-Tibet Plateau permafrost regions. Because of higher elevation and better almospheric transparency, the Qinghai-Tibet Plateau has stronger radiation than other regions, which can change the daily variation of ground surface temperature on the Plateau. The awning measure （shading board） is one of the actively protected permafrost measures, which was adopted along the Qinghai-Tibet railway and highway and the Qing-Kang Highway in China. Field test results show that embankment surface month mean net radiation is 60-130 W/m2, but the value is below 20 W/m2 under the shading board, and the reducing level of naRn-al net radiation is 80%-90%. The shading board reduced the heat flow entering into the embankment by 80%,90% or more, with heat entering into the soil on the common embankment, but emitting from the embankment under the shading board. At the same time, ground surface temperature under the shading board is 6-8 ℃ lower than the exposed embankment. Test results show that the shading board measure can rapidly and effectively reduce net radiation and heat flow into the embankment, decrease embankment surface and interior temperature, effectively delay increase rate of soil temperature under globe warming, ensure stability and safety of the embankment, and guarantee unblocked road projects in cold and permafrost regions.

Preliminary Report on the Indoor Electromagnetic Radiation in a Municipality of Western P.R. China: Up-to-Now Still within the Range

Objective: This study is designed to measure the current level of Indoor Electromagnetic Radiation (IER) in Chongqing, a municipality of western P.R. China, on which further epidemiological investigation on the relation between the level of IER and certain health effects could be based. Methods: 118 Households in 4 urban residential districts in Chongqing were randomly selected. The IER intensity was measured in each household’s living room at different frequencies under three different conditions. Results: The average electric field intensity measured at the frequency range of 1 MHz- 40 GHz was within the guidelines set by the International Commission on Non Ionizing Radiation Protection (ICNIRP). The electromagnetic field intensity measured at other frequencies were at the lowest range of the acceptable values. The average electric field intensity at the frequency range of 5 Hz - 1 kHz was higher at a standing posture than at a sitting posture with domestic appliances turned off in both cases (P < 0.01). Conclusion: The indoor electromagnetic radiation in Chongqing currently is still within the recommended public exposure limit set by ICNIRP.

Radiation of lamp and optimized experiment using artificial light in the Arctic Ocean

A winter optical experiment by an artificial lamp was conducted in the Amundsen Bay of Arctic Ocean from November of 2007 to January of 2008. The radiation field emitted from an artificial lamp was measured and is introduced in this paper, and the optimized experiment project is discussed. It is demonstrated that the minimum size allowed of the lamp is determined by both the field of view （ FOV ） of optical instrument and the measuring distance from the lamp. Some problems that might influence on the experiment result often occur for a simple fluorescent lamp, such as instability, spatial nonuniformity, light divergence, effect of lamp temperature, etc. By the analysis of the light radiation, three kind of measures are proposed to control the quality of the experiment, i.e. keeping consistency of lamp size with FOV of instrument, calibrating in situ downwind, and conducting measurement in effective range. Among them, the downwind calibration is the key step to overcome most problems arose by the lamp. The experiment indicated that the reliable results can be obtained only when the optical measurement is coordinated with the radiation field of artificial lamp. The measured radiation property of the lamp was used to advise the field experiment to minimize measuring error. As the experiment by artificial lamp was the first attempt in the Arctic Ocean, the experience given by this paper is a valuable reference to the correlative studies.

Research on Solar Simulation System for Test of Solar Radiation Measuring Instrument

Since traditional solar simulators are mainly applied to spacecraft and photovoltaic industry,they are not suitable for solar radiation measuring instrument test. Therefore,a deep research is carried out on solar simulators to test of solar radiation measuring instrument,so that obtain the requirements of performance test of solar radiation measuring instrument. With a combination of the requirements for national regulations of metrological verification and performance test of pyranometer and pyrheliometer,it lays emphasis on the research of design methods for improving radiation uniformity and stability of solar simulators; it also focuses on design methods of multidimensional detection workbench,which achieves different detection of solar radiation. After practical test,solar irradiation is within Φ60 mm; irradiation non-uniformity is better than ±0.8%; instability is better than ±0.72%;rotating angle precision is better than 0.09°. Then,solar simulator is used to carry out pyranometer sensitivity test,pyranometer directional response test,pyranometer tilt response test and non-linearity test for radiation instruments. Test results showthat the solar simulator meets the testing requirements of solar radiation measuring instruments.

Synchrotrons radiation stability measurement and improvement

In the 3rd generation synchrotron light source,beside the orbit,air disturbance and ground vibration also could affect the position stability of photon beam in synchrotrons radiation measurement.In the condition of implementation of orbit feedback system at SSRF,the measured position stability of photon beam in synchrotrons radiation measurement station was presented in this paper.And then the improvement methods of position stability of photon beam were discussed.Finally the measured result was shown when the designed feedback system is implemented to improve the position stability of photon beam.

Analysis of the blackbody-radiation shift in an ytterbium optical lattice clock

We accurately evaluate the blackbody-radiation shift in a171 Yb optical lattice clock by utilizing temperature measurement and numerical simulation. In this work. three main radiation sources are considered for the blackbody-radiation shift, including the heated atomic oven, the warm vacuum chamber, and the room-temperature vacuum windows. The temperatures on the outer surface of the vacuum chamber are measured during the clock operation period by utilizing seven calibrated temperature sensors. Then we infer the temperature distribution inside the vacuum chamber by numerical simulation according to the measured temperatures. Furthermore, we simulate the temperature variation around the cold atoms while the environmental temperature is fluctuating. Finally, we obtain that the total blackbody-radiation shift is -1.289（7）Hz with an uncertainty of 1.25×10;for our;Yb optical lattice clock. The presented method is quite suitable for accurately evaluating the blackbody-radiation shift of the optical lattice clock in the case of lacking the sensors inside the vacuum chamber.

Study of Luminous Emission from a Coaxial Plasma Discharge Device in the Presence of External Transverse Magnetic Field

The experimental investigations in this paper are focused on the study of luminous radiation emission from coaxial plasma discharge device and the effect of applied transverse magnetic field Btr on it. The experiment was done in (1.5 KJ - 10 KV) coaxial plasma discharge device. The discharge is operated in Nitrogen gas at pressures from 1 to 2.2 torr. Helmholtz magnetic coils are placed outside the coaxial electrodes with its axis at a distance = 3 cm from the coaxial electrodes muzzle, then Btr with a maximum induction ≈ 0.85 T is applied perpendicularly to the expanded plasma from the coaxial electrodes muzzle. The diagnostics used in the measurements include a Rogowsky coil and a photomultiplier tube equipped with light collimator. The experimental results showed that the maximum intensity of luminous radiation is detected at axial distance (side view) z = 8 cm and gas pressure, P = 2.2 torr. It also showed that the maximum value of axial luminous plasma zone velocity = 2.383 × 106 cm/s at z = 11 cm and P = 1.4 torr. In mode of presence of external Btr, the investigations have shown that, at P = 1.4 torr the maximum intensity of luminous radiation (detected at end-view position) is reduced by 17%, the full width at half maximum, FWHM of luminous radiation signal is increased by 40 times, while the luminous radiation signal is delayed by ta = 438 μs. In two modes of operation ta and FWHM have approximately a minimum values at P = 1.4 torr.

Infrared radiation method for measuring ice segregation temperature of artificially frozen soils

In order to study the evolution of the freezing fringe and final lenses of frost susceptible soils and advance the understanding of frost heave and mechanism of frost heave control, we used an open one-dimensional frost heave test system of infrared radiation technology, instead of a traditional thermistor method. Temperatures of the freezing fringe and segregated ice were measured in a non-contact mode. The results show that accurate and precise temperatures of ice segregation can be obtained by infrared thermal imaging systems. A self-developed inversion program inverted the temperature field of frozen soils. Based on our analysis of temperature variation in segregated ice and our study of the relationship between temperature and rate of ice segregation in cooling and warming processes during intermittent freezing, the mechanism of decreasing frost heave of frozen soils by controlling the growth of final lenses with an intermittent freezing mode, can be explained properly.

An Improved Method for Correction of Air Temperature Measured Using Different Radiation Shields

The variation of air temperature measurement errors using two different radiation shields （DTR502B Vaisala,Finland,and HYTFZ01,Huayun Tongda Satcom,China） was studied.Datasets were collected in the field at the Daxing weather station in Beijing from June 2011 to May 2012.Most air temperature values obtained with these two commonly used radiation shields were lower than the reference records obtained with the new Fiber Reinforced Polymers （FRP） Stevenson screen.In most cases,the air temperature errors when using the two devices were smaller on overcast and rainy days than on sunny days; and smaller when using the imported rather than the Chinese shield.The measured errors changed sharply at sunrise and sunset,and reached maxima at noon.Their diurnal variation characteristics were,naturally,related to changes in solar radiation.The relationships between the record errors,global radiation,and wind speed were nonlinear.An improved correction method was proposed based on the approach described by Nakamura and Mahrt （2005） （NM05）,in which the impact of the solar zenith angle （SZA） on the temperature error is considered and extreme errors due to changes in SZA can be corrected effectively.Measurement errors were reduced significantly after correction by either method for both shields.The error reduction rate using the improved correction method for the Chinese and imported shields were 3.3％ and 40.4％ higher than those using the NM05 method,respectively.