Epidemiological characteristics of varicella in Chongqing,China,2014-2021

Background:To analyze the epidemiological characteristics of varicella epidemics in Chongqing Municipality from 2014 to 2021,and to provide a scientific basis for the formulation of varicella prevention and control measures.Methods:Data on the incidence of varicella outbreaks and vaccination data in Chongqing from 2014 to 2021 were collected through the China Disease Control and Prevention Information System and statistically analyzed using descriptive epidemiological methods.Results:From 2014 to 2021,213,715 cases of varicella were reported in Chongqing Municipality,with an average annual incidence rate of 86.26/100,000,with a statistically significant difference(χ^(2)=24,972.069,P<0.001);varicella incidence is seasonal,with peaks in May/June and October/December each year,presenting a“double-peak distribution”.The average annual incidence rate of varicella in municipal districts was 90.74/100,000,which was higher than that of counties 69.62/100,000 and autonomous counties 84.04/100,000;the average annual incidence rate of varicella in males was 89.37/100,000,and in females,82.22/100,000,with the difference not being statistically significant;the age of onset of the disease was mainly in the group of people under 15 years of age,with a total of 190,021 cases reported(88.9%),with 5-9 years old(35.7%)as the high incidence age group.The incidence occupation was dominated by students in 133,733 cases(62.6%).Conclusion:The overall varicella epidemic in Chongqing is on the rise,and has obvious seasonal,regional and population distribution characteristics.The prevention and control of varicella epidemic should be strengthened,the publicity of varicella vaccine should be increased,and it is recommended that varicella vaccine should be included in the national immunization program.

New generation traction power supply system and its key technologies for electrified railways

Unlike the traditional traction power supply system which enables the electrified railway traction sub- station to be connected to power grid in a way of phase rotation, a new generation traction power supply system without phase splits is proposed in this paper. Three key techniques used in this system have been discussed. First, a combined co-phase traction power supply system is applied at traction substations for compensating negative sequence current and eliminating phase splits at exits of substations; design method and procedure for this system are presented. Second, a new bilateral traction power supply technology is proposed to eliminate the phase split at section post and reduce the influence of equalizing current on the power grid. Meanwhile, power factor should be adjusted to ensure a proper voltage level of the traction network. Third, a seg- mental power supply technology of traction network is used to divide the power supply arms into several segments, and the synchronous measurement and control technology is applied to diagnose faults and their locations quickly and accurately. Thus, the fault impact can be limited to a min- imum degree. In addition, the economy and reliability of the new generation traction power supply system are analyzed.

Development of an Automated LIBS Analytical Test System Integrated with Component Control and Spectrum Analysis Capabilities

The present paper proposes an automated Laser-Induced Breakdown Spectroscopy （LIBS） analytical test system, which consists of a LIBS measurement and control platform based on a modular design concept, and a LIBS qualitative spectrum analysis software and is developed in C#. The platform provides flexible interfacing and automated control; it is compatible with different manufacturer component models and is constructed in modularized form for easy ex- pandability. During peak identification, a more robust peak identification method with improved stability in peak identification has been achieved by applying additional smoothing on the slope obtained by calculation before peak identification. For the purpose of element identification, an improved main lines analysis method, which detects all elements on the spectral peak to avoid omission of certain elements without strong spectral lines, is applied to element identification in the tested LIBS samples. This method also increases the identification speed. In this paper, actual applications have been carried out. According to tests, the analytical test system is compatible with components of various models made by different manufacturers. It can automatically control components to get experimental data and conduct filtering, peak identification and qualitative analysis, etc. on spectral data.

Design of a Modularized Automatic Measurement and Control System for LaserInduced Breakdown Spectrometer

In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and control system was developed. Based on the characteristics of each LIBS component, the following development steps have been performed:( 1) a summary of characteristic parameters of the component are established;( 2) the integration mechanism of multiple electrical interfaces is designed;( 3) the component control instruction library is developed. The experimental results indicate that the measurement and control system is compatible with most LIBS parts in the market.Spectrometer and laser can be compatible with at least three different types of parts. In addition,a multilayer iterative testing process is designed to improve the efficiency of optimization process of LIBS parameters. The experimental results have shown that the automatic optimization of the delay time compared to the manual testing provides significant gain in testing efficiency. The range of delay time in the experiments is 1. 28 to 10. 28 μs and the step value is 1,0. 5,0. 2 and 0. 1 μs. The gain in testing efficiency has been found to be increased by 73. 76%,75. 93%,78. 81% and 80. 42%,respectively.

A review on stress determination and control in metal-based additive manufacturing

Metal additive manufacturing(MAM)is an emerging and disruptive technology that builds three-dimensional(3D)components by adding layer-upon-layer of metallic materials.The complex cyclic thermal history and highly localized energy can produce large temperature gradients,which will,in turn,lead to compressive and tensile stress during the MAM process and eventually result in residual stress.Being an issue of great concern,residual stress,which can cause distortion,delamination,cracking,etc.,is considered a key mechanical quantity that affects the manufacturing quality and service performance of MAM parts.In this review paper,the ongoing work in the field of residual stress determination and control for MAM is described with a particular emphasis on the experimental measurement/control methods and numerical models.We also provide insight on what still requires to be achieved and the research opportunities and challenges.

Effects of anti-pull ties on the bearing behaviors of shallow tunnel-type anchorages in soft rock

Tunnel-type anchorages(TTAs)installed in human gathering areas are characterized by a shallow burial depth,and in many instances,they utilize soft rock as the bearing stratum.However,the stability control measures and the principle of shallow TTAs in soft rock have not been fully studied.Hence,a structure suitable for improving the stability of shallow TTAs in soft rock strata,named the anti-pull tie(APT),was added to the floor of the back face.Physical tests and numerical models were established to study the influence of the APT on the load transfer of TTAs,the mechanical response of the surrounding rock,the stress distribution of the interface,and the failure model.The mechanical characteristics of APTs were also studied.The results show that the ultimate bearing capacity of TTAs with an APT is increased by approximately 11.8%,as compared to the TTAs without an APT.Also,the bearing capacity of TTAs increases approximately linearly with increasing height,width,length,and quantity of APTs,and decreases approximately linearly with increasing distance from the back face and slope angle of the tie slope.The normal squeezing between the tie slope and the surrounding rock increases the shear resistance of the interface and expands the range of the surrounding rock participating in bearing sharing.Both tension and compression zones exist in the APT during loading.The tension zone extends from the tie toe to the tie bottom along the tie slope.The range of the tie body tension zone constantly expands to the deep part of the APT with an increasing load.The peak tensile stress value is located at the tie toe.The distribution of compressive stress in the tie body is the largest at the tie top,followed by the tie slope,and then the tie bottom.

Construction Technology and Safety Risk Control Measures of Deep Foundation Pit Excavation

Deep foundation pit excavation is a basic and key step involved in modern building construction.In order to ensure the construction quality and safety of deep foundation pits,this paper takes a project as an example to analyze deep foundation pit excavation technology,including the nature of this construction project,the main technical measures in the construction of deep foundation pit,and the analysis of the safety risk prevention and control measures.The purpose of this analysis is to provide scientific reference for the construction quality and safety of deep foundation pits.

Radio Frequency Fingerprint-Based Satellite TT&C Ground Station Identification Method

This study presents a radio frequency(RF)fingerprint identification method combining a convolutional neural network(CNN)and gated recurrent unit(GRU)network to identify measurement and control signals.The proposed algorithm(CNN-GRU)uses a convolutional layer to extract the IQ-related learning timing features.A GRU network extracts timing features at a deeper level before outputting the final identification results.The number of parameters and the algorithm’s complexity are reduced by optimizing the convolutional layer structure and replacing multiple fully-connected layers with gated cyclic units.Simulation experiments show that the algorithm achieves an average identification accuracy of 84.74% at a -10 dB to 20 dB signal-to-noise ratio(SNR)with fewer parameters and less computation than a network model with the same identification rate in a software radio dataset containing multiple USRP X310s from the same manufacturer,with fewer parameters and less computation than a network model with the same identification rate.The algorithm is used to identify measurement and control signals and ensure the security of the measurement and control link with theoretical and engineering applications.

Numerical Simulation about the Characteristics of the Store Released from the Internal Bay in Supersonic Flow

To understand the influence of the initial release conditions on the separation characteristics of the store and improve it under high Mach number(Ma=4)flight conditions,the overset grid method and the Realizable k−εturbulence model coupled with an equation with six degrees of freedom are used to simulate the store released from the internal bay.The motion trajectory and the attitude angle of the store separation under the conditions of different centroid,velocity,height and control measures are given by the calculated result.Through analysis,the position of the centroid will affect the separation of the store,which needs to be considered in the design.Increasing the launching height is conducive to the separation of the store.If the store has an initial velocity,it can leave the internal bay more quickly and reduce the probability of collision with the wall.Cylindrical rod and slanted aft wall control measures can improve the attitude of the store and make the store fall more smoothly.

Analysis of Influencing Factors of Pine Wood Nematode Disease in Lu an City Based on GIS

[Objectives]The paper was to figure out the distribution of Monochamus alternatus in the stumps of pine wood nematode infected wood in Lu'an City and to provide a theoretical and practical basis for differentiated prevention and control of pine wood nematode disease in the future.[Methods]The factors influencing the number of epidemic small classes and infected plants in all counties and districts of Lu'an City were analyzed by GIS method,and the number of worms and wormholes of M.alternatus inside and outside the stumps of pine wood nematode infected wood in Lu'an City were investigated on the spot.[Results]There were 98,40,54,781,193,268 and 34 epidemic small classes of pine wood nematode disease,and 7241,6099,9532,39161,11079,49876 and 4853 infected plants in Yu'an District,Jin'an District,Yeji District,Shucheng County,Huoshan County,Jinzhai County and Huoqiu County,respectively.Pine wood nematode disease in Lu'an City mostly occurred in Huoshan County,Shucheng County and Jinzhai County,with relatively high altitude,paddy soil,the annual precipitation higher than 2062 mm,and the annual average temperature lower than 16.2℃.The number of diseased plants of pine wood nematode disease was positively correlated with altitude and annual precipitation,and was negatively correlated with annual average temperature.The number of worms and wormholes in pine wood nematode infected wood was very small at different altitudes,stump heights and stump diameters.[Conclusions]The pine wood nematode infected wood can be differentially processed after stump treatment,and stumps can be peeled.The results will provide a theoretical and practical basis for differentiated prevention and control of pine wood nematode disease in the future.

Occurrence Characteristics and Prevention and Control Measures of Spodoptera frugiperda in Maize

Based on practical work experience,this paper analyzed the occurrence characteristics and control measures of Spodoptera frugiperda in maize.The measures including forecasting and early warning,regional prevention and control,agricultural prevention and control,physical prevention and control,chemical prevention and control,and biological prevention and control can effectively control the damage of S.frugiperda and guarantee the safety of food production.The results will provide some reference for the prevention and control of S.frugiperda.

Control of Bursaphelenchus xylophilus in the State-owned Sishibacao Forest Farm of Yunyang County,China

In view of the fact that pine wood nematode disease is the most dominant disease in Pinus massoniana forests,which has the characteristics of strong infectivity,fast transmission speed,and great difficulty in prevention and control,a brief description was made to the occurrence status of pine wood nematode disease and difficulties faced with its control in the State-owned Sishibacao Forest Farm of Yunyang County,China,followed by the analysis on the prevention and control measures from aspects of strict control,epidemic situation monitoring,joint prevention and control,and clearance of infected trees,as well as the existing problems of pine wood nematode disease.Finally,reasonable suggestions including strengthening the construction of talent team were put forward,aiming to provide a beneficial reference for the scientific,efficient,and reasonable control of pine wood nematode disease in Pinus massoniana Lamb.forests of Yunyang State-owned Sishibacao Forest Farm.

苏北缺水地区国控断面水质超标成因分析及控制对策(英文)

Taking state-controlled section of Xuzhou Peiyan river as an example,the current water quality was monitored,and the cause of over water quality standard was analyzed.The results showed that the pollutants of Peiyan river were mainly from the urban river segment,and the immediate cause of over standard was tributary pollutants in urban river segment with the runoff into rivers.So we should strengthen the maintenance of drainage control and gate-han,accelerate the construction of urban wastewater treatment facilities and supporting pipe network,promote rural decentralized sewage treatment,prevent and control livestock and poultry pollution,pesticides and fertilizers pollution,and intercept non-point source pollution by using eco-technology.

上海市应对新型冠状病毒肺炎疫情综合防控策略

面对新型冠状病毒肺炎疫情,上海市坚决贯彻中央部署要求,采取了最严格、最全面、最积极的防控措施,在短时间内有效地遏制疫情蔓延势头。在疫情防控过程中,准确把握疫情形势变化,因时因势调整防控策略和措施,在严防境外疫情输入、有效处置本土疫情、统筹推动疫情防控和经济社会发展方面形成了行之有效的防控举措,构建起超大城市科学精准防控工作模式。

西南涌流域农业面源污染状况分析(英文)

Taking Xinan River basin as research object,the status of agricultural non-point source pollution was analyzed based on field survey,as well as the effect of fertilizer and pesticide leaching and runoff,livestock and poultry breeding and rural domestic pollution on non-point source TN and TP.At last,some technical countermeasures of controlling non-point source pollution were put forward according to the characteristics of agricultural non-point source pollution in Xinan River basin.

中国酸雨污染现状·成因分析及防治措施(英文)

Environmental problem is one of three major issues of common concern in the world today.Being a developing socialist country,the environmental problems in china are even more prominent,mainly in population expansion,sharp decrease of global forest areas,soil erosion,acid rain pollution,water pollution and so on.This essay is to introduce the present status,formation causes and hazardous condition of acid rain pollution in china.Some feasible and effective control measures are put forward according to the actual situation in China.

柿炭疽病鉴别与防治(英文)

[ Objective] The study aimed to research the identification of Persimmon anthracnose and its controlling methods.[ Method ] The pathogen and characteristics, infection and occurrence law, damage symptoms of persimmon anthracnose were stated simply and the methods for con- trolling the disease were summed up. [ Result] The pathogen of Persimmon anthracnose was Gloeospor/um kaki Hod, belonging to Deuteromycotina. Germination and invasion of the conidia, sporulation and growth of mycelium all required high temperature, with the optimum temperature of 25 ℃ and the lethal temperature of 50 ℃ （10 min）. The occurrence strength of Persimmon anthracnose related with the factors including host, environment, culture circumstances, mainly doing harm to the fruits and branches. The occurrence of the disease could be controlled by such agricultur- al measures as cleaning the orchard, using the resistant varieties and planting the disease-free seedlings, adopting the balanced fertilization, improving the irrigation and drainage systems, conducting the dense planting and thin branches, building garden using the seedling that grafting on planted stock and raising the grafted parts of the stock. When the incidence was heavy, it needed to spray the fungicides or protective agent for the control of the Persimmon anthracnose. The fungicides should be mainly sprayed on the lesion of shoot, fruit surface and branches. [ Conclusion] The study provided the reference for the control of the Persimmon anthracnose.

广西北海甘蔗锈病生物学特性研究及防治对策(英文)

The sugarcane rust was the main disease causing damage on sugarcane leaves. The biological characteristics of the sugarcane rust pathogens found in Beihai were studied. The research results showed that the germination of uredospores would be promoted under the dark condition or with the glucose concentration of 1.5%. The suitable temperature range for the germination of uredospore was 20 -25 ℃, 25 ℃3 was the optimum temperature. The range of relative humidity （RH） for the germination of uredospore was over 80%, the optimum relative humidity for the germination of uredospore was 100% ＋water drops with the germination rate of 28.3%. Urediospore could germinate in the pH value range of 4.1 - 11.1, the most suitable pH value was 7.0. At routine conditions, the longest survival period of uredospore was 120 days. Selection of resistant varieties and cultivation management was the key of control measures.

泡桐丛枝病的鉴别与防治(英文)

Pathogen and characteristics,occurrence law,damage symptom of Paulownia fortunei witches broom disease were simply described,and the control method of the disease was summarized.

Damage by wind-blown sand and its control measures along the Taklimakan Desert Highway in China

Desertification is one of the most serious environmental problems in the world,especially in the arid desert regions.Combating desertification,therefore,is an urgent task on a regional or even global scale.The Taklimakan Desert in China is the second largest mobile desert in the world and has been called the''Dead Sea''due to few organisms can exist in such a harsh environment.The Taklimakan Desert Highway,the longest desert highway(a total length of 446 km)across the mobile desert in the world,was built in the 1990s within the Taklimakan Desert.It has an important strategic significance regarding oil and gas resources exploration and plays a vital role in the socio-economic development of southern Xinjiang,China.However,wind-blow sand seriously damages the smoothness of the desert highway and,in this case,mechanical sand control system(including sand barrier fences and straw checkerboards)was used early in the life of the desert highway to protect the road.Unfortunately,more than 70%of the sand barrier fences and straw checkerboards have lost their functions,and the desert highway has often been buried and frequently blocked since 1999.To solve this problem,a long artificial shelterbelt with the length of 437 km was built along the desert highway since 2000.However,some potential problems still exist for the sustainable development of the desert highway,such as water shortage,strong sandstorms,extreme environmental characteristics and large maintenance costs.The study aims to provide an overview of the damages caused by wind-blown sand and the effects of sand control measures along the Taklimakan Desert Highway.Ultimately,we provide some suggestions for the biological sand control system to ensure the sustainable development of the Taklimakan Desert Highway,such as screening drought-resistant species to reduce the irrigation requirement and ensure the sound development of groundwater,screening halophytes to restore vegetation in the case of soil salinization,and planting cash crops,such as Cistanche,Wolfberry,Apocynum and other cash crops to decrease the high cost of maintenance on highways and shelterbelts.