Mechanical Method on Bimaterial Body Boundary with Crack-tip

The problem of bimaterial body boundary, especially, microcosmic and macroscopic boundary behavior of bimetallic boundary, ceramic and metal, is paid close attention by many scholars in electronic device and communication, material science, aeronautical and astronautical engineering and et al. Modern photoelectric technology, such as laser technique, conveniently is used to measure geometrical stress field of bimaterial body, quantitatively analyse boundary mechanical behavior with crack-tip and composition of boundary matter element. One has put forward mechanical model, which is used to analyze joint energy, atom transition of matter of medium layer, diffusion and solid solution, by means of energy theory of quasi- continuous body. This paper recommended the theory, technology, and gives the results.

Explicit solution of the radial breathing mode frequency of single-wailed carbon nanotubes

On the basis of a molecular mechanics model, an analytical solution of the radial breathing mode （RBM） frequency of single-walled carbon nanotubes （SWCNTs） is obtained. The effects of tube chirality and tube diameter on the RBM frequency are investigated and good agreement between the present results and existing data is found. The present analytical formula indicates that the chirality and size dependent elastic properties are responsible for the effects of the chirality and small size on the RBM frequency of an SWCNT.

Acoustic Response and Micro-Damage Mechanism of Fiber Composite Materials under Mode-Ⅱ Delamination

Realizing the accurate characterization for the dynamic damage process is a great challenge. Here we carry out testing simultaneously for dynamic monitoring and acoustic emission （AE） statistical analysis towards fiber composites under mode-Ⅱ delamination damage. The load curve, AE relative energy, amplitude distribution, and amplitude spectrum are obtained and the delamination damage mechanism of the composites is investigated by the microscopic observation of a fractured specimen. The results show that the micro-damage accumulation around the crack tip region has a great effect on the evolutionary process of delamination. AE characteristics and amplitude spectrum represent the damage and the physical mechanism originating from the hierarchical microstructure. Our finding provides a novel aud feasible strategy to simultaneously evaluate the dynamic response and micro-damage mechanism for fiber composites.

Effect of reclaimed sand additions on mechanical properties and fracture behavior of furan no-bake resin sand

In this work, the effects of reclaimed sand additions on the microstructure characteristics, mechanical properties and fracture behavior of furan no-bake resin sand have been investigated systematically within the temperature range from 25 to 600 oC. The addition of 20%-100% reclaimed sand showed dramatic strength deterioration effect at the same temperature, which is associated with the formation of bonding bridges. Both the ultimate tensile strength(UTS) and compressive strength(CS) of the moulding sand initially increase with the increase of temperature, and then sharply decrease with the further increase of temperature, which is attributed to the thermal decomposition of furan resin. The addition amount of reclaimed sand has a remarkable effect on the room temperature fracture mode, i.e., with the addition of 0-20% reclaimed sand, the fracture mode was mainly cohesive fracture; the fracture mode converts to be mixture fracture mode as the addition of reclaimed sand increases to 35%-70%; further increasing the addition to 100% results in the fracture mode of typical adhesive fracture. The fracture surface of the bonding bridge changes from a semblance of cotton or holes to smooth with the increase of test temperature.

Mode and Mechanism of Urban Land Redevelopment

On the basis of summarizing and appraising the mode and mechanism of land redevelopment in urban regeneration in China’s transitional period,the relationship between land redevelopment system and urban regeneration is analyzed from the perspective of land system,and then the cooperative mechanism of urban regeneration and land redevelopment is recommended for promoting the development of urban regeneration.

One Possible Mechanism for the Principal Mode of Atmospheric Low-Frequency Variabilityin the Northern Hemisphere Winter

With the specified basic flow in the Northern Hemisphere winter, a study is made of the structure characteristics and mechanism of the principal mode of atmospheric low-frequency variability in terms of a linear barotropic model. Statistical and dynamical analyses of the model results indicate that the mode and the related dominant-forcing excitation zone are featured by evident spatial distribution and that the mechanism responsible for the mode bears fetation to the zonal asymmetry of the basic flow and the associated barotropic energy conversion.

Large User Direct Transaction: Mechanism and Mode Proposed

Bilateral Transaction between large users and power generation enterprises is not a simple reform. It is an important stage in power market restructuring and will grant the electricity users the right of service selection. The implementation of bilateral transactions will help to establish the multiple buyers' market structure, reasonable price mechanism and market trading mechanism. It is also an important approach to enhance the competition in the market and improve the efficiency of energy resource allocation.

Influences of mechanized tillage and sowing modes on soil physical properties,soybean yield and economic benefits in mollisols region of Northeast China

Appropriate mechanized straw returning and tillage sowing techniques were effective means to optimize soil physical properties and enhance agricultural productivity,as well as important measures for the conservation and restoration of mollisols region in Northeast China.Under the condition of full-scale maize straw returning,four mechanized tillage and sowing modes were set,including plough tillage and sowing(PTS),combined tillage and sowing(CTS),no-tillage and sowing(NTS),and no-tillage and sowing with straw mulching(NTSM).In 2020 and 2021,the study investigated the effects of different mechanized tillage and sowing modes on soil physical properties,soybean yield and economic benefits.The results showed that during the pod-setting and pod-filling period of soybean,the NTS and NTSM treatments exhibited better effects on deep soil insulation and shallow soil moisture retention,the soil physical structure of PTS and CTS treatments were relatively ideal.Compared with PTS and CTS treatments,NTS and NTSM treatments significantly increased soil gravimetric water content(SWC)by 2.35%to 7.98%in the 5-15 cm soil layer and increased soil temperature(ST)by 3.94%to 10.42%in the 25-35 cm soil layer(p<0.05),significantly increased soil bulk density(SBD)by 2.98%to 6.72%and significantly reduced soil total porosity(STP)by 3.88%to 6.53%in the 5-25 cm soil layer,and significantly reduced soil gas phase ratio by 8.26%to 6.27%at the 15-25 cm soil layers,which caused soil three-phase ratio(STPR)of PTS and CTS treatment in 15-25 cm soil layer were relatively ideal.The soybean yield of NTSM treatment in 2020 was not significantly different from PTS and CTS treatment(p>0.05),the soybean yield of NTSM treatment in 2021 significantly increased by 7.30%and 5.84%over PTS and CTS treatments,respectively.And the average annual profit per unit area of NTSM treatment increased by 12.84%,12.41%and 8.57%compared with PTS,CTS and NTS treatments,respectively.Therefore,it was recommended to combine NTSM technique with PTS or CTS technique in a maize-soybean rotation system in mollisols region.The research results provided reference for the selection of appropriate mechanized tillage and sowing techniques in Northeast China’s mollisols region and had important guiding significance and practical value for the construction of rational plow layers and the implementation of conservation tillage.

Analysis of Rolling Contact Bearings Test Data by the Bımodal Method

Lieblein J. and Zelen A. conducted a study of the fatigue life of deep groove ball bearings. This study was based on data of 4948 bearings as obtained from 5 companies and 213 test groups. Among these data is a detailed test report #3183, lot 73, consisting of 23 failed bearings. This report states that the Weibull slope of this group is 2.23, meaning that this distribution is mono sloped. These test data were plotted by the author on a bilinear scale plane, of endurance life versus bearing number and proved to be distinctly bi sloped. This basic difference prompted a wide study resulting in several new findings and set the grounds for a new analysis method.

Expansion of the South China Sea basin:Constraints from magnetic anomaly stripes,sea floor topography,satellite gravity and submarine geothermics

The widely distributed E-W-trending magnetic anomaly stripes in the central basin and the N-Etrending magnetic anomaly stripes in the southwest sub-basin provide the most important evidence for Neogene expansion of the South China Sea.The expansion mechanism remains,however,controversial because of the lack of direct drilling data,non-systematic marine magnetic survey data,and irregular magnetic anomaly stripes with two obvious directions.For example,researchers have inferred different ages and episodes of expansion for the central basin and southwest sub-basin.Major controversy centers on the order of basinal expansion and the mechanism of expansion for the entire South China Sea basin.This study attempts to constrain these problems from a comprehensive analysis of the seafloor topography,magnetic anomaly stripes,regional aeromagnetic data,satellite gravity,and submarine geothermics.The mapped seafloor terrain shows that the central basin is a north-south rectangle that is relatively shallow with many seamounts,whereas the southwest sub-basin is wide in northeast,gradually narrows to the southwest,and is relatively deeper with fewer seamounts.Many magnetic anomaly stripes are present in the central basin with variable dimensions and directions that are dominantly EWtrending,followed by the NE-,NW- and NS-trending.Conversely such stripes are few in the southwest sub-basin and mainly NE-trending.Regional magnetic data suggest that the NW-trending Ailaoshan-Red River fault extends into the South China Sea,links with the central fault zone in the South China Sea,which extends further southward to Reed Tablemount.Satellite gravity data show that both the central basin and southwest sub-basin are composed of oceanic crust.The Changlong seamount is particularly visible in the southwest sub-basin and extends eastward to the Zhenbei seamount.Also a low gravity anomaly zone coincides with the central fault zone in the sub-basin.The submarine geothermic distribution demonstrates that the southwest sub-basin has a higher geothermal value than the central basin,and that the central fault zone is defined by a low thermal anomaly.This study suggests that NW-SE expansion of the southwest subbasin is later than the N-S expansion of the central basin with the sub-basin extending into the central basin and with both expansions ending at the same time.The expansion of southwestern sub-basin,similar to the Japanese Sea,is likely caused by left-lateral strike slip on the central fault zone in the South China Sea,which may have significance for finding oil and gas in this region.

Distribution and mechanism of gently dipping fractures subjected to river incision: A case study from Nujiang River, China

Gently dipping fractures subjected to river incision are widely distributed on rock slopes.In this paper,a rock slope on the Nujiang River(China)is investigated to study the role of gently dipping fractures in the rock slopes evolution.Detailed field surveys indicate that gentle fractures are concentrated in four main zones.Moreover,the kinematics of the fracture system suggest that the genesis of these fractures can be synthesized into a progressive evolution model.This model indicates that the joints begin with the formation of an array of en echelon cracks that are subjected to continued crack elongation and shearing before ultimately approaching one another and interacting to form a complex joint system.Geomechanical analysis is performed to reveal the mechanisms of this genesis,and three main fracture patterns are identified based on the slope stress and are classified with respect to the slope evolution.Based on the detail field investigations and the evolutionary history of the river valley,we propose that intermittent incision by the river was the main factor contributing to the concentrated distribution of gently dipping joints.

Overall Evaluation of the Effect of Residual Stress Induced by Shot Peening in the Improvement of Fatigue Fracture Resistance for Metallic Materials

Before 1980s,the circular suspension spring in automobile subjected to torsion fatigue load,under the cyclic normal tensile stresses,the majority of fatigue fracture occurred was in normal tensile fracture mode（NTFM）and the fracture surface was under 45°diagonal.Because there exists the interaction between the residual stresses induced by shot peening and the applied cyclic normal tensile stresses in NTFM,which represents as＂stress strengthening mechanism＂,shot peening technology could be used for improving the fatigue fracture resistance（FFR）of springs.However,since 1990s up to date,in addition to regular NTFM,the fatigue fractures occurred of peened springs from time to time are in longitudinal shear fracture mode（LSFM）or transverse shear fracture mode（TSFM）with the increase of applied cyclic shear stresses,which leads to a remarkable decrease of FFR.However,LSFM/TSFM can be avoided effectively by means of shot peening treatment again on the peened springs.The phenomena have been rarely happened before.At present there are few literatures concerning this problem.Based upon the results of force analysis of a spring,there is no interaction between the residual stresses by shot peening and the applied cyclic shear stresses in shear fracture.This;means that the effect of＂stress strengthening mechanism＂for improving the FFR of LSFM/TSFM is disappeared basically.During shot peening,however,both of residual stress and cyclic plastic deformed microstructure are induced synchronously like＂twins＂in the surface layer of a spring.It has been found for the first time by means of force analysis and experimental results that the modified microstructure in the＂twins＂as a＂structure strengthening mechanism＂can improve the FFR of LSFM/TSFM.At the same time,it is;also shown that the optimum technology of shot peening strengthening must have both＂stress strengthening mechanism＂and＂structure strengthening mechanism＂simultaneously so that the FFR of both NTFM and LSFM/TSFM can be improved by shot peening.

Controlling Agricultural Tridimensional Pollution through Circular Economy Mechanism

Agricultural tridimensional pollution （AtriP） has multi-directional and complicated chains. Circular economy is found to be an efficient mechanism that can help control AtriP. The application of three circular economic modes in agriculture and its related industries call not only interdict the AtriP chains in different stages and different directions, but also produce greater ecological, social and economical returns with less input. Nevertheless, it is a complicated systematic engineering to construct and implement effective circular economic modes to bring AtriP under control, and it depends not only on the support of the relevant technology system, but also on the supports of the relevant policies and law systems.

A theoretical study on the alkene insertion step in Rh-Yanphos catalyzed hydroformylation

This paper studied the mechanism of the alkene insertion elementary step in the asymmetric hydroformylation （AHF） catalyzed by RhH（CO）2[（R,S）-Yanphos] using four alkene substrates （CH2=CH- Ph, CH2=CH-Ph-（p）-Me, CH2=CH-C（==O）OCH3 and CH2=CH-OC（=O）-Ph, abbreviated as A1-A4）. Interestingly, the equatorial vertical coordination mode （A mode） with respect to the Rh center was found for AI and A2 but not for A3 and A4, although the equatorial in-plane coordination mode （E mode） was found for A1 -A4. The relative energy of the E mode of the -q2-intermediates is lower than that of the A mode. In the alkene insertion step, Path 1 is more favorable than Path 2 for this system. As for AI and A2, there could be a transformation between 2eq and 2ax.