期刊文献+
共找到3,671篇文章
< 1 2 184 >
每页显示 20 50 100
Enhancing Renewable Energy Integration:A Gaussian-Bare-Bones Levy Cheetah Optimization Approach to Optimal Power Flow in Electrical Networks
1
作者 Ali S.Alghamdi Mohamed A.Zohdy Saad Aldoihi 《Computer Modeling in Engineering & Sciences》 SCIE EI 2024年第8期1339-1370,共32页
In the contemporary era,the global expansion of electrical grids is propelled by various renewable energy sources(RESs).Efficient integration of stochastic RESs and optimal power flow(OPF)management are critical for n... In the contemporary era,the global expansion of electrical grids is propelled by various renewable energy sources(RESs).Efficient integration of stochastic RESs and optimal power flow(OPF)management are critical for network optimization.This study introduces an innovative solution,the Gaussian Bare-Bones Levy Cheetah Optimizer(GBBLCO),addressing OPF challenges in power generation systems with stochastic RESs.The primary objective is to minimize the total operating costs of RESs,considering four functions:overall operating costs,voltage deviation management,emissions reduction,voltage stability index(VSI)and power loss mitigation.Additionally,a carbon tax is included in the objective function to reduce carbon emissions.Thorough scrutiny,using modified IEEE 30-bus and IEEE 118-bus systems,validates GBBLCO’s superior performance in achieving optimal solutions.Simulation results demonstrate GBBLCO’s efficacy in six optimization scenarios:total cost with valve point effects,total cost with emission and carbon tax,total cost with prohibited operating zones,active power loss optimization,voltage deviation optimization and enhancing voltage stability index(VSI).GBBLCO outperforms conventional techniques in each scenario,showcasing rapid convergence and superior solution quality.Notably,GBBLCO navigates complexities introduced by valve point effects,adapts to environmental constraints,optimizes costs while considering prohibited operating zones,minimizes active power losses,and optimizes voltage deviation by enhancing the voltage stability index(VSI)effectively.This research significantly contributes to advancing OPF,emphasizing GBBLCO’s improved global search capabilities and ability to address challenges related to local minima.GBBLCO emerges as a versatile and robust optimization tool for diverse challenges in power systems,offering a promising solution for the evolving needs of renewable energy-integrated power grids. 展开更多
关键词 Renewable energy integration optimal power flow stochastic renewable energy sources gaussian-bare-bones levy cheetah optimizer electrical network optimization carbon tax optimization
下载PDF
Effect of applied electric fields on supralinear dendritic integration of interneuron
2
作者 樊亚琴 魏熙乐 +1 位作者 卢梅丽 伊国胜 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第2期84-95,共12页
Evidences show that electric fields(EFs)induced by the magnetic stimulation could modulates brain activities by regulating the excitability of GABAergic interneuron.However,it is still unclear how and why the EF-induc... Evidences show that electric fields(EFs)induced by the magnetic stimulation could modulates brain activities by regulating the excitability of GABAergic interneuron.However,it is still unclear how and why the EF-induced polarization affects the interneuron response as the interneuron receives NMDA synaptic inputs.Considering the key role of NMDA receptor-mediated supralinear dendritic integration in neuronal computations,we suppose that the applied EFs could functionally modulate interneurons’response via regulating dendritic integration.At first,we build a simplified multi-dendritic circuit model with inhomogeneous extracellular potentials,which characterizes the relationship among EF-induced spatial polarizations,dendritic integration,and somatic output.By performing model-based singular perturbation analysis,it is found that the equilibrium point of fast subsystem can be used to asymptotically depict the subthreshold input–output(sI/O)relationship of dendritic integration.It predicted that EF-induced strong depolarizations on the distal dendrites reduce the dendritic saturation output by reducing driving force of synaptic input,and it shifts the steep change of sI/O curve left by reducing stimulation threshold of triggering NMDA spike.Also,the EF modulation prefers the global dendritic integration with asymmetric scatter distribution of NMDA synapses.Furthermore,we identify the respective contribution of EF-regulated dendritic integration and EF-induced somatic polarization to an action potential generation and find that they have an antagonistic effect on AP generation due to the varied NMDA spike threshold under EF stimulation. 展开更多
关键词 GABAergic interneuron electrical field supralinear dendritic integration action potential generation
下载PDF
Simulation and Analysis of Cascading Faults in Integrated Heat and Electricity Systems Considering Degradation Characteristics
3
作者 Hang Cui Hongbo Ren +3 位作者 Qiong Wu Hang Lv Qifen Li Weisheng Zhou 《Energy Engineering》 EI 2024年第3期581-601,共21页
Cascading faults have been identified as the primary cause of multiple power outages in recent years.With the emergence of integrated energy systems(IES),the conventional approach to analyzing power grid cascading fau... Cascading faults have been identified as the primary cause of multiple power outages in recent years.With the emergence of integrated energy systems(IES),the conventional approach to analyzing power grid cascading faults is no longer appropriate.A cascading fault analysis method considering multi-energy coupling characteristics is of vital importance.In this study,an innovative analysis method for cascading faults in integrated heat and electricity systems(IHES)is proposed.It considers the degradation characteristics of transmission and energy supply com-ponents in the system to address the impact of component aging on cascading faults.Firstly,degradation models for the current carrying capacity of transmission lines,the water carrying capacity and insulation performance of thermal pipelines,as well as the performance of energy supply equipment during aging,are developed.Secondly,a simulation process for cascading faults in the IHES is proposed.It utilizes an overload-dominated development model to predict the propagation path of cascading faults while also considering network islanding,electric-heating rescheduling,and load shedding.The propagation of cascading faults is reflected in the form of fault chains.Finally,the results of cascading faults under different aging levels are analyzed through numerical examples,thereby verifying the effectiveness and rationality of the proposed model and method. 展开更多
关键词 Cascading fault degradation characteristics integrated heat and electricity system multi-energy flow
下载PDF
Analysis for Effects of Temperature Rise of PV Modules upon Driving Distance of Vehicle Integrated Photovoltaic Electric Vehicles
4
作者 Masafumi Yamaguchi Yasuyuki Ota +18 位作者 Taizo Masuda Christian Thiel Anastasios Tsakalidis Arnulf Jaeger-Waldau Kenji Araki Kensuke Nishioka Tatsuya Takamoto Takashi Nakado Kazumi Yamada Tsutomu Tanimoto Yosuke Tomita Yusuke Zushi Kenichi Okumura Takashi Mabuchi Akinori Satou Kyotaro Nakamura Ryo Ozaki Nobuaki Kojima Yoshio Ohshita 《Energy and Power Engineering》 2024年第4期131-150,共20页
The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO<sub>2</sub> emissions from the transport sector to realize a decarbonized society. Although ... The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO<sub>2</sub> emissions from the transport sector to realize a decarbonized society. Although long-distance driving of VIPV-EV without electricity charging is expected in sunny regions, driving distance of VIPV-EV is affected by climate conditions such as solar irradiation and temperature rise of PV modules. In this paper, detailed analytical results for effects of climate conditions such as solar irradiation and temperature rise of PV modules upon driving distance of the VIPV-EV were presented by using test data for Toyota Prius and Nissan Van demonstration cars installed with high-efficiency InGaP/GaAs/InGaAs 3-junction solar cell modules with a module efficiency of more than 30%. The temperature rise of some PV modules studied in this study was shown to be expressed by some coefficients related to solar irradiation, wind speed and radiative cooling. The potential of VIPV-EV to be deployed in 10 major cities was also analyzed. Although sunshine cities such as Phoenix show the high reduction ratio of driving range with 17% due to temperature rise of VIPV modules, populous cities such as Tokyo show low reduction ratio of 9%. It was also shown in this paper that the difference between the driving distance of VIPV-EV driving in the morning and the afternoon is due to PV modules’ radiative cooling. In addition, the importance of heat dissipation of PV modules and the development of high-efficiency PV modules with better temperature coefficients was suggested in order to expand driving range of VIPV-EV. The effects of air-conditioner usage and partial shading in addition to the effects of temperature rise of VIPV modules were suggested as the other power losses of VIPV-EV. 展开更多
关键词 Vehicle integrated Photovoltaics (VIPV) VIPV-Powered electric Vehicles Driving Distance PV Modules Solar Irradiation Temperature Rise Radiative Cooling
下载PDF
Treatment of postpartum depression with integrated traditional Chinese and Western medicine nursing and electrical stimulation 被引量:1
5
作者 Wen-Hui Zhai Mei-Jiao Wang +2 位作者 Yi-Jing Zhao Shuang-Ling Hu Jin-Man Zhou 《World Journal of Clinical Cases》 SCIE 2023年第33期7980-7986,共7页
BACKGROUND Postpartum depression(PPD)is a common psychological disease among puerperal women,and postpartum pelvic floor dysfunction is a common disease among pregnant women.The occurrence of postpartum pelvic floor d... BACKGROUND Postpartum depression(PPD)is a common psychological disease among puerperal women,and postpartum pelvic floor dysfunction is a common disease among pregnant women.The occurrence of postpartum pelvic floor dysfunction will increase the incidence of PPD.AIM To explore the therapeutic effect of integrated traditional Chinese and Western medicine nursing combined with electrical stimulation of pelvic floor muscles and the rectus abdominis on PPD.METHODS From April 2020 to January 2022,100 parturients with a rectus abdominis muscle separation distance>2.0 cm who underwent reexamination 6 wk after delivery at our hospital were selected as the research subjects.According to the random number table method,the patients were divided into either an observation group(n=50)or a control group(n=50).There was no significant difference in the general data between the two groups(P>0.05).Both groups were treated by electrical stimulation.The observation group was additionally treated by integrated traditional Chinese and Western medicine nursing.A self-designed Depression Knowledge Questionnaire was used to evaluate the awareness of knowledge on depression in all patients 3 wk after intervention.The Hamilton Depression Scale(HAMD)was used to evaluate the depression before intervention and 1 wk and 3 wk after intervention,and the Morisky Medication Adherence Scale(MMAS-8)was used to evaluate the medication compliance.SPSS19.0 was used for statistical analyses.RESULTS The rate of awareness of knowledge on depression in the observation group was significantly higher than that of the control group(P<0.05).The scores of MMAS-8 were comparable between the two groups before intervention(P>0.05),but were significantly higher in the observation group than in the control group at 1 wk and 3 wk after intervention(P<0.05).The HAMD scores were comparable between the two groups before intervention(P>0.05),but were significantly lower in the observation group than in the control group at 1 wk and 3 wk after intervention(P<0.05).CONCLUSION Integrated traditional Chinese and Western medicine nursing combined with electrical stimulation of pelvic floor muscles and the rectus abdominis is effective in the treatment of postpartum depression and worthy of clinical promotion. 展开更多
关键词 integrated traditional Chinese and Western medicine nursing Pelvic floor muscles Rectus abdominis electrical stimulation Postpartum depression
下载PDF
Conformal Human–Machine Integration Using Highly Bending‑Insensitive,Unpixelated,and Waterproof Epidermal Electronics Toward Metaverse
6
作者 Chao Wei Wansheng Lin +8 位作者 Liang Wang Zhicheng Cao Zijian Huang Qingliang Liao Ziquan Guo Yuhan Su Yuanjin Zheng Xinqin Liao Zhong Chen 《Nano-Micro Letters》 SCIE EI CAS CSCD 2023年第11期140-156,共17页
Efficient and flexible interactions require precisely converting human intentions into computer-recognizable signals,which is critical to the breakthrough development of metaverse.Interactive electronics face common d... Efficient and flexible interactions require precisely converting human intentions into computer-recognizable signals,which is critical to the breakthrough development of metaverse.Interactive electronics face common dilemmas,which realize highprecision and stable touch detection but are rigid,bulky,and thick or achieve high flexibility to wear but lose precision.Here,we construct highly bending-insensitive,unpixelated,and waterproof epidermal interfaces(BUW epidermal interfaces)and demonstrate their interactive applications of conformal human–machine integration.The BUW epidermal interface based on the addressable electrical contact structure exhibits high-precision and stable touch detection,high flexibility,rapid response time,excellent stability,and versatile“cut-and-paste”character.Regardless of whether being flat or bent,the BUW epidermal interface can be conformally attached to the human skin for real-time,comfortable,and unrestrained interactions.This research provides promising insight into the functional composite and structural design strategies for developing epidermal electronics,which offers a new technology route and may further broaden human–machine interactions toward metaverse. 展开更多
关键词 Carbon-based functional composite Multifunctional epidermal interface Property modulation Addressable electrical contact structure Conformal human–machine integration
下载PDF
Electrically and Optically Bistable Operation in an Integration of a 1310 nm DFB Laser and a Tunneling Diode
7
作者 李亚节 王嘉琪 +7 位作者 郭露 陈光灿 李召松 于红艳 周旭亮 王火雷 陈娓兮 潘教青 《Chinese Physics Letters》 SCIE CAS CSCD 2018年第4期38-41,共4页
We experimentally demonstrate an In P-based hybrid integration of a single-mode DFB laser emitting at around 1310 nm and a tunneling diode. The evident negative differential resistance regions are obtained in both ele... We experimentally demonstrate an In P-based hybrid integration of a single-mode DFB laser emitting at around 1310 nm and a tunneling diode. The evident negative differential resistance regions are obtained in both electrical and optical output characteristics. The electrical and optical bistabilities controlled by the voltage through the tunneling diode are also measured. When the voltage changes between 1.46 V and 1.66 V, a 200-mV-wide hysteresis loop and an optical power ON/OFF ratio of 17 dB are obtained. A side-mode suppression ratio of the integrated device in the ON state is up to 43 dB. The tunneling diode can switch on/off the laser within a very small voltage range compared with that directly controlled by a voltage source. 展开更多
关键词 DFB In electrically and Optically Bistable Operation in an integration of a 1310 nm DFB Laser and a Tunneling Diode
下载PDF
Analysis on the Application of Electrical New Technology of in Electromechanical Integration
8
作者 Wang Gang 《International Journal of Technology Management》 2014年第2期125-127,共3页
关键词 技术创新 机电一体化 应用 太阳能光伏发电 电工 等离子体物理 电磁流体力学 超导电力技术
下载PDF
Research and Review on the Development of Mechanical and Electrical Integration of System Function Principle and Related Technologies
9
作者 Zhihai Zhou 《International Journal of Technology Management》 2015年第10期137-139,共3页
关键词 机电一体化系统 现代科学技术 功能原理 微电子技术 机械行业 计算机技术 生产方式 管理体制
下载PDF
Electricity-Carbon Interactive Optimal Dispatch of Multi-Virtual Power Plant Considering Integrated Demand Response
10
作者 Shiwei Su Guangyong Hu +2 位作者 Xianghua Li Xin Li Wei Xiong 《Energy Engineering》 EI 2023年第10期2343-2368,共26页
As new power systems and dual carbon policies develop,virtual power plant cluster(VPPC)provides another reliable way to promote the efficient utilization of energy and solve environmental pollution problems.To solve t... As new power systems and dual carbon policies develop,virtual power plant cluster(VPPC)provides another reliable way to promote the efficient utilization of energy and solve environmental pollution problems.To solve the coordinated optimal operation and low-carbon economic operation problem in multi-virtual power plant,a multi-virtual power plant(VPP)electricity-carbon interaction optimal scheduling model considering integrated demand response(IDR)is proposed.Firstly,a multi-VPP electricity-carbon interaction framework is established.The interaction of electric energy and carbon quotas can realize energy complementarity,reduce energy waste and promote low-carbon operation.Secondly,in order to coordinate the multiple types of energy and load in VPPC to further achieve low-carbon operation,the IDR mechanism based on the user comprehensive satisfaction(UCS)of electricity,heat as well as hydrogen is designed,which can effectively maintain the UCS in the cluster within a relatively high range.Finally,the unit output scheme is formulated to minimize the total cost of VPPC and the model is solved using theCPLEX solver.The simulation results showthat the proposed method effectively promotes the coordinated operation among multi-VPP,increases the consumption rate of renewable energy sources and the economics of VPPC and reduces carbon emissions. 展开更多
关键词 Virtual power plant cluster carbon quota interaction electricity interaction integrated demand response user comprehensive satisfaction coordinated optimal operation
下载PDF
Discrete variational principle and first integrals for Lagrange-Maxwell mechanico-electrical systems 被引量:6
11
作者 傅景礼 戴桂冬 +1 位作者 萨尔瓦多·希梅尼斯 唐贻发 《Chinese Physics B》 SCIE EI CAS CSCD 2007年第3期570-577,共8页
This paper presents a discrete vaxiational principle and a method to build first-integrals for finite dimensional Lagrange-Maxwell mechanico-electrical systems with nonconservative forces and a dissipation function. T... This paper presents a discrete vaxiational principle and a method to build first-integrals for finite dimensional Lagrange-Maxwell mechanico-electrical systems with nonconservative forces and a dissipation function. The discrete variational principle and the corresponding Euler-Lagrange equations are derived from a discrete action associated to these systems. The first-integrals are obtained by introducing the infinitesimal transformation with respect to the generalized coordinates and electric quantities of the systems. This work also extends discrete Noether symmetries to mechanico-electrical dynamical systems. A practical example is presented to illustrate the results. 展开更多
关键词 DISCRETE variational principle first integral mechanico-electrical systems
下载PDF
Symplectic-energy-first integrators of discrete mechanico-electrical dynamical systems 被引量:1
12
作者 傅景礼 陈本永 +1 位作者 唐贻发 付昊 《Chinese Physics B》 SCIE EI CAS CSCD 2008年第11期3942-3952,共11页
A discrete total variation calculus with variable time steps is presented for mechanico-electrical systems where there exist non-potential and dissipative forces. By using this discrete variation calculus, the symplec... A discrete total variation calculus with variable time steps is presented for mechanico-electrical systems where there exist non-potential and dissipative forces. By using this discrete variation calculus, the symplectic-energy-first integrators for mechanico-electrical systems are derived. To do this, the time step adaptation is employed. The discrete variational principle and the Euler-Lagrange equation are derived for the systems. By using this discrete algorithm it is shown that mechanico-electrical systems are not symplectic and their energies are not conserved unless they are Lagrange mechanico-electrical systems. A practical example is presented to illustrate these results. 展开更多
关键词 total variation symplectic-energy-momentum integrator mechanico-electrical system
下载PDF
Information Resources Integration for Electric Power Enterprises
13
作者 By Luo Chenglian Electric Power of Henan 《Electricity》 2005年第A04期48-51,共4页
Information resources integration for enterprises at present is fairly hot in the course of information construction, as well as difficult. To achieve this goal, different developers adopt different technical means an... Information resources integration for enterprises at present is fairly hot in the course of information construction, as well as difficult. To achieve this goal, different developers adopt different technical means and their implementation results are also diversified for various reasons. Hereunder, the article, taking the information construction and resources integration activities by Electric Power of Henan (EPH) as an example, deploys a deep analysis and discussion on necessity and essential factors and how to ensure high effect in the process of information integration. 展开更多
关键词 electrIC POWER ENTERPRISE RESOURCES integration in
下载PDF
基于SolidWorkselectrical的电控教室设计
14
作者 辛顺强 张可平 《智慧工厂》 2016年第11期74-76,共3页
针对高职院校自动化类专业学生电气控制技术课程,以Solid Works Electrical软件为实现手段,提出一种理实一体化教室的建设方案,将Solid Works Electrical软件应用到电气控制技术课程教学过程中,提高课程教学质量。
关键词 SOLID WORKS electrical 电气控制技术 理实一体化教室
下载PDF
基于SolidWorks Electrical的机电一体化教学研究
15
作者 颜建 《装备制造技术》 2016年第11期260-261,共2页
现阶段高校在进行机电一体化课程建设时,往往理论知识较多,而实践机会较少,因此在学习机电一体化课程时,往往出现学生难以理解,导致学生的设计作品往往都因为经验不足而不理想,通过引入solid electrical系列软件,在虚拟三维空间中对机... 现阶段高校在进行机电一体化课程建设时,往往理论知识较多,而实践机会较少,因此在学习机电一体化课程时,往往出现学生难以理解,导致学生的设计作品往往都因为经验不足而不理想,通过引入solid electrical系列软件,在虚拟三维空间中对机电一体化设备进行设计并加以改进,可以大大的缩短设计周期以及降低设计成本,而且还能够有效的提高产品设计的成功率。 展开更多
关键词 机电一体化 经验不足 设计周期 实训课程
下载PDF
Electrically driven single-photon sources 被引量:2
16
作者 Yating Lin Yongzheng Ye Wei Fang 《Journal of Semiconductors》 EI CAS CSCD 2019年第7期46-54,共9页
Single-photon sources are building blocks for photonic quantum information processes. Of the many single-photon generation schemes, electrically driven single-photon sources have the advantages of realizing monolithic... Single-photon sources are building blocks for photonic quantum information processes. Of the many single-photon generation schemes, electrically driven single-photon sources have the advantages of realizing monolithic integration of quantum light sources and detectors without optical filtering, thus greatly simplify the integrated quantum photonic circuits. Here, we review recent advances on electrically driven single-photon sources based on solid-state quantum emitters, such as semiconductor epitaxial quantum dots, colloidal quantum dots, carbon nanotubes, molecules, and defect states in diamond, SiC and layered semiconductors. In particular, the merits and drawbacks of each system are discussed. Finally, the article is concluded by discussing the challenges that remain for electrically driven single-photon sources. 展开更多
关键词 SINGLE PHOTON SOURCES electrically DRIVEN integrATED QUANTUM photoncs
下载PDF
Optimal Operation of Integrated Heat and Electricity Systems:A Tightening McCormick Approach 被引量:6
17
作者 Lirong Deng Hongbin Sun +3 位作者 Baoju Li Yong Sun Tianshu Yang Xuan Zhang 《Engineering》 SCIE EI 2021年第8期1076-1086,共11页
Combined heat and electricity operation with variable mass flow rates promotes flexibility,economy,and sustainability through synergies between electric power systems(EPSs)and district heating systems(DHSs).Such combi... Combined heat and electricity operation with variable mass flow rates promotes flexibility,economy,and sustainability through synergies between electric power systems(EPSs)and district heating systems(DHSs).Such combined operation presents a highly nonlinear and nonconvex optimization problem,mainly due to the bilinear terms in the heat flow model—that is,the product of the mass flow rate and the nodal temperature.Existing methods,such as nonlinear optimization,generalized Benders decomposition,and convex relaxation,still present challenges in achieving a satisfactory performance in terms of solution quality and computational efficiency.To resolve this problem,we herein first reformulate the district heating network model through an equivalent transformation and variable substitution.The reformulated model has only one set of nonconvex constraints with reduced bilinear terms,and the remaining constraints are linear.Such a reformulation not only ensures optimality,but also accelerates the solving process.To relax the remaining bilinear constraints,we then apply McCormick envelopes and obtain an objective lower bound of the reformulated model.To improve the quality of the McCormick relaxation,we employ a piecewise McCormick technique that partitions the domain of one of the variables of the bilinear terms into several disjoint regions in order to derive strengthened lower and upper bounds of the partitioned variables.We propose a heuristic tightening method to further constrict the strengthened bounds derived from the piecewise McCormick technique and recover a nearby feasible solution.Case studies show that,compared with the interior point method and the method implemented in a global bilinear solver,the proposed tightening McCormick method quickly solves the heat–electricity operation problem with an acceptable feasibility check and optimality. 展开更多
关键词 integrated heat and electricity system Convex relaxation Operation McCormick envelopes
下载PDF
Electrical Calibration for Calvet Type Microcalorimetry 被引量:1
18
作者 Chen Jiawei Bao Zhengyu Mei YupingFaculty of Earth Sciences, China University of Geosciences, Wuhan 430074 《Journal of China University of Geosciences》 SCIE CSCD 2001年第3期232-235,共4页
The device construction and working principle of Calvet type heat conductive microcalorimetry are generally introduced in this paper. Based on previous work, we design a reactor vessel and its electrical calibration e... The device construction and working principle of Calvet type heat conductive microcalorimetry are generally introduced in this paper. Based on previous work, we design a reactor vessel and its electrical calibration equipment according to our special study systems. The heat constant of our improved microalorimetry is gotten by means of electrical calibration on the basis of Tian's equation. The results gotten by integration method are identical with ones gotten by peak method. It shows that our improved device works well enough to develop further studies. 展开更多
关键词 electrical calibration MICROCALORIMETRY integration method peak method heat constant.
下载PDF
Algebraic structure and Poisson's theory of mechanico-electrical systems 被引量:3
19
作者 刘鸿基 唐贻发 傅景礼 《Chinese Physics B》 SCIE EI CAS CSCD 2006年第8期1653-1661,共9页
The algebraic structure and Poisson's integral theory of mechanico-electrical systems are studied. The Hamilton canonical equations and generalized Hamilton canonical equations and their the contravariant algebraic f... The algebraic structure and Poisson's integral theory of mechanico-electrical systems are studied. The Hamilton canonical equations and generalized Hamilton canonical equations and their the contravariant algebraic forms for mechanico-electrical systems are obtained. The Lie algebraic structure and the Poisson's integral theory of Lagrange mechanico-electrical systems are derived. The Lie algebraic structure admitted and Poisson's integral theory of the Lagrange-Maxwell mechanico-electrical systems are presented. Two examples are presented to illustrate these results. 展开更多
关键词 algebraic structure Poisson integral method mechanico-electrical system
下载PDF
Integrated CAD/CAPP/CAM system for electric discharge machining
20
作者 迟关心 赵万生 刘光壮 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2000年第2期68-70,共3页
An integrated CAD/CAPP/CAM system modeling for Electric Discharge Machining (EDM) is constructed on the basis of an integrated engineering database. EDM feature objects are developed using the object oriented database... An integrated CAD/CAPP/CAM system modeling for Electric Discharge Machining (EDM) is constructed on the basis of an integrated engineering database. EDM feature objects are developed using the object oriented database provided by AutoCAD R14, and EDM feature modeling is realized in AutoCAD environments. 展开更多
关键词 electric DISCHARGE MACHINING (EDM) integrATED CAD/CAPP/CAM system feature modeling
下载PDF
上一页 1 2 184 下一页 到第
使用帮助 返回顶部