Traditional techniques for treatment of waste rubber, such as burning, generate some highly non- degradable synthetic materials that cause unrepairable environmental damages by releasing heavy metals, such as arsenic,...Traditional techniques for treatment of waste rubber, such as burning, generate some highly non- degradable synthetic materials that cause unrepairable environmental damages by releasing heavy metals, such as arsenic, chromium, lead, manganese and nickel. For this, scrap tires are used as light- weight alternative materials in many engineering applications, such as retaining wall backfilling. In the present study, 90 laboratory models were prepared to evaluate the stability of mechanically stabilized earth （MSE） walls with plate anchors. Then, the bearing capacity and horizontal displacements of the retaining walls were monitored by exerting a static loading to investigate the effects of adding different contents （5 wt%, 10 wt%, 15 wt% and 20 wt%） of recycled crumb rubber （RCR） to the fill of a mechanically stabilized retaining wall with plate anchors. To visualize the critical slip surface of the wall, the particle image velocimetry （PIV） technique was employed. Results showed that the circular anchor plates almost continually provided a higher bearing capacity and wall stability than the square plates. Moreover, the backfill with 15 wt% RCR provided the maximum bearing capacity of the wall. Increasing the weight percentage of RCR to 20 wt% resulted in a significant reduction in horizontal displacement of the wall, which occurred due to the decrease in lateral earth pressure against the whole walls. An increase in RCR content resulted in the decrease in the formation of failure wedge and the expansion of the wall slip surface, and the failure wedge did not form in the sand mixtures with 15 wt% and 20 wt% RCRs.展开更多
The Micropile-Mechanically Stabilized Earth(MSE) wall, specially designed for mountain roads, is proposed to improve the MSE wall local stability, global stability and impact resistance of roadside barriers. Model tes...The Micropile-Mechanically Stabilized Earth(MSE) wall, specially designed for mountain roads, is proposed to improve the MSE wall local stability, global stability and impact resistance of roadside barriers. Model tests and the corresponding numerical modeling were conducted to validate the serviceability of the Micropile-MSE wall and the reliability of the numerical method. Then, a parametric study of the stress and deformation of Micropile-MSE wall based on the backfill strength and interfacial friction angle between backfill and backslope is conducted to evaluate its performance.The test results indicate that the surcharge-induced horizontal earth pressure, base pressure and lateral displacement of the wall panel of Micropile-MSE wall decrease. The corresponding numerical results are nearly equal to the measured values. The basic failure mode of MSE wall in steep terrain is the sliding of backfill along the backslope, while A-frame style micropiles are capable of preventing the sliding trend.The maximum resultant displacement can be decreased by 6.25% to 46.9% based on different interfacial friction angles, and the displacement canbe reduced by 6% ~ 56.1% based on different backfill strengths. Furthermore, the reduction increases when the interfacial friction angle and internal friction angle of backfill decrease. In addition, the lateral displacement of wall panel, the deformation of backfill decrease and the tension strain of geogrid obviously, which guarantees the MSE wall functions and provides good conditions for mountain roads.展开更多
Mechanically stabilized earth(MSE)retaining walls are popular for highway bridge structures.They have precast concrete panels attached to earth reinforcement.The panels are designed to have some lateral movement.Howev...Mechanically stabilized earth(MSE)retaining walls are popular for highway bridge structures.They have precast concrete panels attached to earth reinforcement.The panels are designed to have some lateral movement.However,in some cases,excessive movement and even complete dislocation of the panels have been observed.In this study,3-D numerical modeling involving an existing MSE wall was undertaken to investigate various wall parameters.The effects of pore pressure,soil cohesion,earth reinforcement type and length,breakage/slippage of reinforcement and concrete strength,were examined.Results showed that the wall movement is affected by soil pore pressure and reinforcement integrity and length,and unaffected by concrete strength.Soil cohesion has a minor effect,while the movement increased by 13–20 mm for flexible geogrid reinforced walls compared with the steel grid walls.The steel grid stresses were below yielding,while the geogrid experienced significant stresses without rupture.Geogrid reinforcement may be used taking account of slippage resistance and wall movement.If steel grid is used,non-cohesive soil is recommended to minimize corrosion.Proper soil drainage is important for control of pore pressure.展开更多
文摘Traditional techniques for treatment of waste rubber, such as burning, generate some highly non- degradable synthetic materials that cause unrepairable environmental damages by releasing heavy metals, such as arsenic, chromium, lead, manganese and nickel. For this, scrap tires are used as light- weight alternative materials in many engineering applications, such as retaining wall backfilling. In the present study, 90 laboratory models were prepared to evaluate the stability of mechanically stabilized earth （MSE） walls with plate anchors. Then, the bearing capacity and horizontal displacements of the retaining walls were monitored by exerting a static loading to investigate the effects of adding different contents （5 wt%, 10 wt%, 15 wt% and 20 wt%） of recycled crumb rubber （RCR） to the fill of a mechanically stabilized retaining wall with plate anchors. To visualize the critical slip surface of the wall, the particle image velocimetry （PIV） technique was employed. Results showed that the circular anchor plates almost continually provided a higher bearing capacity and wall stability than the square plates. Moreover, the backfill with 15 wt% RCR provided the maximum bearing capacity of the wall. Increasing the weight percentage of RCR to 20 wt% resulted in a significant reduction in horizontal displacement of the wall, which occurred due to the decrease in lateral earth pressure against the whole walls. An increase in RCR content resulted in the decrease in the formation of failure wedge and the expansion of the wall slip surface, and the failure wedge did not form in the sand mixtures with 15 wt% and 20 wt% RCRs.
基金sponsored by Colorado Department of Transportation (CDOT Award No. 12 HAA 38229) to R.Y.S.P.partial funding was received by Z.Z. from the National Natural Science Foundation of China (Grant No. 51379067, 51609040, 51420105013)+3 种基金the Natural Science Foundation of Fujian Province (Grant No. 2016J05112)Science and Technology Project of Bureau of Geology and Mineral Resources of Fujian Province (DK2016014)the Natural Science Foundation of Fujian Province (Grant No. 2015J01158)the Fundamental Research Funds for the Central Universities (Grant No. 2015B17314)
文摘The Micropile-Mechanically Stabilized Earth(MSE) wall, specially designed for mountain roads, is proposed to improve the MSE wall local stability, global stability and impact resistance of roadside barriers. Model tests and the corresponding numerical modeling were conducted to validate the serviceability of the Micropile-MSE wall and the reliability of the numerical method. Then, a parametric study of the stress and deformation of Micropile-MSE wall based on the backfill strength and interfacial friction angle between backfill and backslope is conducted to evaluate its performance.The test results indicate that the surcharge-induced horizontal earth pressure, base pressure and lateral displacement of the wall panel of Micropile-MSE wall decrease. The corresponding numerical results are nearly equal to the measured values. The basic failure mode of MSE wall in steep terrain is the sliding of backfill along the backslope, while A-frame style micropiles are capable of preventing the sliding trend.The maximum resultant displacement can be decreased by 6.25% to 46.9% based on different interfacial friction angles, and the displacement canbe reduced by 6% ~ 56.1% based on different backfill strengths. Furthermore, the reduction increases when the interfacial friction angle and internal friction angle of backfill decrease. In addition, the lateral displacement of wall panel, the deformation of backfill decrease and the tension strain of geogrid obviously, which guarantees the MSE wall functions and provides good conditions for mountain roads.
基金The study reported in this paper was performed through a grant from the Texas Department of Transportation(TxDOT).
文摘Mechanically stabilized earth(MSE)retaining walls are popular for highway bridge structures.They have precast concrete panels attached to earth reinforcement.The panels are designed to have some lateral movement.However,in some cases,excessive movement and even complete dislocation of the panels have been observed.In this study,3-D numerical modeling involving an existing MSE wall was undertaken to investigate various wall parameters.The effects of pore pressure,soil cohesion,earth reinforcement type and length,breakage/slippage of reinforcement and concrete strength,were examined.Results showed that the wall movement is affected by soil pore pressure and reinforcement integrity and length,and unaffected by concrete strength.Soil cohesion has a minor effect,while the movement increased by 13–20 mm for flexible geogrid reinforced walls compared with the steel grid walls.The steel grid stresses were below yielding,while the geogrid experienced significant stresses without rupture.Geogrid reinforcement may be used taking account of slippage resistance and wall movement.If steel grid is used,non-cohesive soil is recommended to minimize corrosion.Proper soil drainage is important for control of pore pressure.
