Stability analysis of a liquid crystal elastomer self-oscillator under a linear temperature field

Self-oscillating systems abound in the natural world and offer substantial potential for applications in controllers,micro-motors,medical equipments,and so on.Currently,numerical methods have been widely utilized for obtaining the characteristics of self-oscillation including amplitude and frequency.However,numerical methods are burdened by intricate computations and limited precision,hindering comprehensive investigations into self-oscillating systems.In this paper,the stability of a liquid crystal elastomer fiber self-oscillating system under a linear temperature field is studied,and analytical solutions for the amplitude and frequency are determined.Initially,we establish the governing equations of self-oscillation,elucidate two motion regimes,and reveal the underlying mechanism.Subsequently,we conduct a stability analysis and employ a multi-scale method to obtain the analytical solutions for the amplitude and frequency.The results show agreement between the multi-scale and numerical methods.This research contributes to the examination of diverse self-oscillating systems and advances the theoretical analysis of self-oscillating systems rooted in active materials.

Effect of Liquid Temperature on Surface and Mechanical Characteristics of Al-Mg Alloy Treated with a Cavitating Waterjet

The presented study aims to reveal the effect of liquid temperature on cavitation-induced erosion of an Al-Mgalloy. An experimental work was conducted using a submerged cavitating waterjet to impact the specimen surface.For a certain cavitation number and a given standoff distance, different liquid temperatures were considered.Accordingly, a comprehensive comparison was implemented by inspecting the mass loss and surface morphologyof the tested specimens. The results show that the cumulative mass loss increases continuously with the liquidtemperature. A cavitation zone with an irregular profile becomes evident as the cavitation treatment proceeds.Increasing the temperature promotes the generation of cavitation bubbles. Large erosion pits are induced aftersevere material removal. The microhardness increases with the distance from the target surface. At a liquidtemperature of 50℃, the microhardness fluctuates apparently with increasing the depth of indentation.

Simulation study on non-linear effects of initial melt temperatures on microstructures during solidification process of liquid Mg_7Zn_3 alloy

The non-linear effects of different initial melt temperatures on the microstructure evolution during the solidification process of liquid Mg7Zn3 alloys were investigated by molecular dynamics simulation, The microstructure transformation mechanisms were analyzed by several methods. The system was found to be solidified into amorphous structures from different initial melt temperatures at the same cooling rate of 1×10^12 K/s, and the 1551 bond-type and the icosahedron basic cluster （12 0 12 0 ） played a key role in the microstructure transition. Different initial melt temperatures had significant effects on the final microstructures. These effects only can be clearly observed below the glass transition temperature Tg; and these effects are non-linearly related to the initial melt temperatures, and fluctuated in a certain range. However, the changes of the average atomic energy of the systems are still linearly related with the initial melt temperatures, namely, the higher the initial melt temperature is, the more stable the amorphous structure is and the stronger the glass forming ability will be.

CO_2 absorption with ionic liquids at elevated temperatures

COcapture with ionic liquids（ILs） has attracted many attentions, and most works focused on absorption ability at ambient temperatures, while seldom research was concerned at elevated temperatures.This not only limits the COabsorption application at elevated temperature, but also the determination of the operation condition of the COdesorption generally occurring at higher temperature. This work mainly reported COsolubilities in ILs at elevated temperatures and related properties were also provided. 1-alkyl-3-methylimidazolium bis（trifluoromethylsulfonyl）imide（[CnMIm][TfN]） ILs were selected as physical absorbents for COcapture in this work due to their relative higher COabsorption capacities and good thermal stabilities. The long-term stability tests showed that [CnMIm][TfN] is thermally stable at 393.15 K for long time. COsolubilities in [CnMIm][TfN] were systematically determined at temperatures from 353.15 K to 393.15 K. It demonstrated that COsolubility obviously increases with the increase of pressure while slightly decreases with increase of temperature. As the length of alkyl chain on the cation increases, COsolubility in ILs increases. Additionally, the thermodynamic properties including the Gibbs free energy, enthalpy, and entropy of COwere also calculated.

Kinetics of Non-catalyzed Decomposition of D-xylose in High Temperature Liquid Water

The kinetics of non-catalyzed decompositions of xylose and its decomposition product furfural in high temperature liquid water （HTLW） was studied for temperature from 180 to 220℃ and under pressure of 10MPa. The main products of xylose decomposition were furfural and formic acid, and furfural further degraded to formic acid under HTLW condition. With the assumption of first order kinetics e.quation, the evaluated activation energy of xylose and furfural decomposition was 123.27kJ·mol^-1 and 58.84kJ·mol^-1, respectively.

Low-temperature Electrodeposition of Aluminium from Lewis Acidic 1-Allyl-3-methylimidazolium Chloroaluminate Ionic Liquids

Lewis acidic 1-allyl-3-methylimidazolium chloroaluminate ionic liquids were used as promising elec-trolytes in the low-temperature electrodeposition of aluminium.Systematic studies on deposition process have been performed by cyclic voltammetry and chronoamperometry.The surface morphology and X-ray diffraction(XRD) patterns of deposits prepared at different experimental conditions were also investigated.It was shown that the nu-cleation density and growth rate of crystallites had a great effect on the structure of aluminium deposited.The crys-tallographic orientation of deposits was mainly influenced by temperature and current density.Smooth,dense and well adherent aluminium coatings were obtained on copper substrates at 10-25 mA?cm?2 and 313.2-353.2 K.More-over,the current efficiency of deposition and purity of aluminium have been significantly improved,demonstrating that the ionic liquids tested have a prospectful potential in electroplating and electrorefining of aluminium.

An experimental study of the effect of ionic liquids on the low temperature oxidation of coal

Fourier transform infrared spectroscopy(FTIR) and constant heating rate experiments were performed to study the low temperature oxidation of coal treated by an ionic liquid,1-allyl-3-methylimidazolium chloride.The inerting effect of the ionic liquid toward the low temperature oxidation process is discussed.The results show that:(1) The hydroxyl content associated with hydrogen bonds,the aliphatic methyl content,the methylene group content,and the ether oxygen bond content are reduced in the treated coal.At the same time the content of aromatic C@C bonds is constant but these chemical bonds weaken and some substituted aromatic hydrocarbon content increases while other types decrease.This demonstrates that(AMIm)Cl dissolves and destroys the coal surface microstructure;(2) The oxygen consumption of the treated coal is less than what is seen in raw coal.The CO,CO 2,C 2 H 4,and C 2 H 6 content from the treated coal is reduced compared to the untreated coal;(3) The apparent activation energy for the oxidizing reaction is different in the treated and raw coals.Micro-structural changes and macroscopic gas production allow us to conclude that(AMIm)Cl can effectively inhibit low temperature oxidation of coal.

Dissolution of Konjac Glucomannan with Room Temperature Ionic Liquids

Two kinds of new room temperature ionic liquids （RTILs）, 1-allyl-3-methylimidazolium chloride （AMIMCl） and 1-butyl-3-methylimidazolium chloride （BMIMCl）, were synthesized and used for the dissolution of konjac glucomannan （KGM）. The experimental results showed that the solubility of KGM in AMIMCl was better than that in BMIMCl. Regenerated KGM were obtained by adding anhydrous alcohol to the KGM / ionic liquids solutions. Solubility, molecular weight, structure, and thermal property of the regenerated KGM were investigated by polarized optical microscopy （POM）, viscosimetry, infrared spectroscopy （IR）, X-ray diffraction technique （XRD）, thermogravimetry （TG） and differential scanning calorimetry （DSC）. It was demonstrated that the viscosity-averaged molecular weight of the KGM samples decreased after regeneration because of the molecular degradation of KGM. Results from IR and XRD indicated that the chemical structure and the crystalline form of regenerated KGM were not changed. Results from TG and DSC showed that the thermal stability of the regenerated KGM samples only slightly decreased. These results suggest that AMIMCl and BMIMCl are direct and effective solvents for KGM.

Theoretical Analysis and Experimental Study on Breakaway Torque of Large-diameter Magnetic Liquid Seal at Low Temperature

The existing researches of the magnetic liquid rotation seal have been mainly oriented to the seal at normal temperature and the seal with the smaller shaft diameter less than 100 mm. However, the large-diameter magnetic liquid rotation seal at low temperature has not been reported both in theory and in application up to now. A key factor restricting the application of the large-diameter magnetic liquid rotation seal at low temperature is the high breakaway torque. In this paper, the factors that influence the breakaway torque including the number of seal stages, the injected quantity of magnetic liquid and the standing time at normal temperature are studied. Two kinds of magnetic liquid with variable content of large particles are prepared first, and a seal feedthrough with 140 mm shaft diameter is used in the experiments. All experiments are carried out in a low temperature chamber with a temperature range from 200℃ to -100℃. Different numbers of seal stages are tested under the same condition to study the relation between the breakaway torque and the number of seal stages. Variable quantity of magnetic liquid is injected in the seal gap to get the relation curve of the breakaway torque and the injecting quantity of magnetic liquid. In the experiment for studying the relation between the breakaway torque and the standing time at the normal temperature, the seal feedtrough is laid at normal temperature for different period of time before it is put in the low temperature chamber. The experimental results show that the breakaway torque is proportional to the number of seal stages, the injected quantity of magnetic liquid and the standing time at the normal temperature. Meanwhile, the experimental results are analyzed and the torque formula of magnetic liquid rotation seal at low temperature is deduced from the Navier-Stokes equation on the base of the model of magnetic liquid rotation seal. The presented research can make wider application of the magnetic liquid seal in general. And the large-diameter magnetic liquid rotation seal at low temperature designed by using present research results are to be used in some special fields, such as the military field, etc.

Substitution Reactions by Azide and Thiocyanide Anions in Room Temperature Ionic Liquids

Conducted in the ionic liquids, activated and inactivated halides, acyl chlorides, tosylate, and bezotriazolyl acylates were converted to corresponding azide and thiocyanide compounds in high yields under mild conditions.

Kinetics of non-catalyzed hydrolysis of tannin in high temperature liquid water

High temperature liquid water(HTLW) has drawn increasing attention as an environmentally benign medium for organic chemical reactions,especially acid-/base-catalyzed reactions. Non-catalyzed hydrolyses of gallotannin and tara tannin in HTLW for the simultaneous preparation of gallic acid(GA) and pyrogallol(PY) are under investigation in our laboratory. In this study,the hydrolysis kinetics of gallotannin and tara tannin were determined. The reaction is indicated to be a typical consecutive first-order one in which GA has formed as a main intermediate and PY as the final product. Selective decomposition of tannin in HTLW was proved to be possible by adjusting reaction temperature and time. The present results provide an important basic data and reference for the green preparation of GA and PY.

Study of Imidazolium Ionic Liquids:Temperature-dependent Fluorescence and Molecular Dynamics Simulation

The steady-state fluorescence spectra and molecular dynamics simulations were explored to investigate the temperature dependent organization in some imidazolium ionic liquids：1-butyl-3-methylimidazolium hexafluo-rophosphate（[bmim][PF6]）,1-ethyl-3-methylimidazolium ethylsulfate（[emim][EtSO4]） and 1-butyl-3-methylimida-zolium tetrafluoroborate（[bmim][BF4]）.The pure room temperature ionic liquids（ILs） exhibit a large red shift at more than an excitation wavelength of around 340 nm,which demonstrates the heterogeneous nature of the liquids.Furthermore,the fluorescence spectra of the ionic liquids were found to be temperature-dependent.The emission intensity gradually decreased with increasing temperature for the neat ionic liquids and the mixed solutions of [bmim][BF4]-H2O,which was the special phenomena induced by not only the local structure but also the viscosity.The molecular dynamics simulation further confirms that the structures of ionic liquids are sensitive to the surroun-ding environment because of the aggregation degree of ILs.

Synthesis and Characterization of Liquid Crystal with Lower Temperature of Phase Change of meso-tetra-(4-n-lauroyloxyphenyl)porphyrin

The synthesis and characterization of meso-tetra (4-n-lauroyloxy phenyl) porphyrin with long ester chains are reported. The domains of stability and the structure of the liquid crystalline phases are determined by optical microscopy and differential scanning calorimerials (DSC).

Enhanced Acid/Base Catalysis in High Temperature Liquid Water

Two novel and environmentally benign solvent systems, organic acids-ennchea high temperature liquid water （HTLW） and NH3-enriched HTLW, were developed, which can enhance the reaction rate of acid/base-catalyzed organic reactions in HTLW. We investigated the decomposition of fructose in organic acids-enriched HTLW, hydrolysis of cinnamaldehyde and aldol condensation of phenylaldehyde with acetaldehyde in NH3-enriched HTLW. The experimental results demonstrated that organic acids-enriched or NH3-enriched HTLW can greatly accelerate acid/base-catalyzed organic reactions in HTLW.

Flux-measuring approach of high temperature metal liquid based on BP neural networks

A soft-measuring approach is presented to measure the flux of liquid zinc with high temperature andcausticity. By constructing mathematical model based on neural networks, weighing the mass of liquid zinc, the fluxof liquid zinc is acquired indirectly, the measuring on line and flux control are realized. Simulation results and indus-trial practice demonstrate that the relative error between the estimated flux value and practical measured flux value islower than 1.5%, meeting the need of industrial process.

Research on the principle of space high-precision temperature control system of liquid crystals based Stokes polarimeter

The magnetic field is one of the most important parameters in solar physics,and a polarimeter is the key device to measure the solar magnetic field.Liquid crystals based Stokes polarimeter is a novel technology,and will be applied for magnetic field measurement in the first space-based solar observatory satellite developed by China,Advanced Space-based Solar Observatory.However,the liquid crystals based Stokes polarimeter in space is not a mature technology.Therefore,it is of great scientific significance to study the control method and characteristics of the device.The retardation produced by a liquid crystal variable retarder is sensitive to the temperature,and the retardation changes 0.09°per 0.10℃.The error in polarization measurement caused by this change is 0.016,which affects the accuracy of magnetic field measurement.In order to ensure the stability of its performance,this paper proposes a high-precision temperature control system for liquid crystals based Stokes polarimeter in space.In order to optimize the structure design and temperature control system,the temperature field of liquid crystals based Stokes polarimeter is analyzed by the finite element method,and the influence of light on the temperature field of the liquid crystal variable retarder is analyzed theoretically.By analyzing the principle of highprecision temperature measurement in space,a high-precision temperature measurement circuit based on integrated operational amplifier,programmable amplifier and 12 bit A/D is designed,and a high-precision space temperature control system is developed by applying the integral separation PI temperature control algorithm and PWM driving heating films.The experimental results show that the effect of temperature control is accurate and stable,whenever the liquid crystals based Stokes polarimeter is either in the air or vacuum.The temperature stability is within±0.0150℃,which demonstrates greatly improved stability for the liquid crystals based Stokes polarimeter.

Liquid nitrogen level meter for high-temperature superconductor (HTS)

Many kinds of high temperature superconductor （HTS） power machines such as HTS cable, HTS fault current limitcr and HTS magnet are cooled by liquid nitrogen. The level of liquid nitrogen should be monitored and controlled to ensure the thermal stability and the dielectric strength as well. To measure the level, capacitance method and differential pressure method are usually used. However, each method has installation difficulties and measurement errors for unsteady state operation with varying system pressure. A new liquid level meter using a 2G HTS conductor is described, which has similar structure with the liquid helium level meter with NbTi filament. The level meter is fabricated with a parallel connected heater, which helps the separation of the superconducting region and normal region, considering the critical temperature, large heat capacity of conductor and cooling characteristics. The level of liquid nitrogen can be obtained from the measured voltage signal along the 2G HTS conductor. Design, fabrication and test results of the new liquid nitrogen level meter are presented.

An Experimental Study on the Drag Property of High-Temperature Particles Falling into Cold Liquid Pool

This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereperformed by pouring one or several Zirconia spheres with various high-temperature and a diameter of 3～ 10 mminto a water pool. The particles falling-down speeds were recorded by high-speed photographic instrumentation,and pressures and water temperatures were measured. A comparison between the experiments with cold and hotspheres respectively, employing three different sphere types each, was presented. The experimental data, com-pared with the theory of the evaporation drag model, are nearly identical.

Feasibility Demonstrations of Liquid Turbine Power Generator Driven by Low Temperature Heats

Lower temperature waste heats less than 373 K have strong potentials to supply additional energies because of their enormous quantities and ubiquity. Accordingly, reinforcement of power generations harvesting low temperature heats is one of the urgent tasks for the current generation in order to accomplish energy sustainability in the coming decades. In this study, a liquid turbine power generator driven by lower temperature heats below 373 K was proposed in the aim of expanding selectable options for harvesting low temperature waste heats less than 373 K. The proposing system was so simply that it was mainly composed of a liquid turbine, a liquid container with a biphasic medium of water and an underlying water-insoluble low-boiling-point medium in a liquid phase, a heating section for vaporization of the liquid and a cooling section for entropy discharge outside the system. Assumed power generating steps via the proposing liquid turbine power generator were as follows: step 1: the underlying low-boiling-point medium in a liquid phase was vaporized, step 2: the surfacing vapor bubbles of low-boiling-point medium accompanied the biphasic medium in their wakes, step 3: such high momentum flux by step 2 rotated the liquid turbine (i.e. power generation), step 4: the surfacing low-boiling-point medium vapor was gradually condensed into droplets, step 5: the low-boiling-point medium droplets were submerged to the underlying medium in a liquid phase. Experiments with a prototype liquid turbine power generator proved power generations in accordance with the assumed steps at a little higher than ordinary temperature. Increasing output voltage could be obtained with an increase in the cooling temperature among tested ranging from 294 to 296 K in contrast to normal thermal engines. Further improvements of the direct current voltage from the proposing liquid turbine power generator can be expected by means of far more vigorous multiphase flow induced by adding solid powders and theoretical optimizations of heat and mass transfers.

Effects of Temperature and [S] on the Kinetics of Nitrogen Removal from Liquid Steel

The kinetics of denitrogenation from liquid steel was studied by using an oxygen-nitrogen analysis system(LECO TC-436) under 1600 degreesC similar to 2813 degreesC conditions. The results show that when [S]=0.005%, nitrogen removal was controlled by nitrogen transfer in liquid diffusion layer, when [S]=0.012% and 0.140%, it was controlled by both nitrogen transfer in liquid diffusion layer and the chemical reaction at the liquid-gas interface below 2250 degreesC, and by nitrogen transfer in liquid diffusion layer under 2250 degreesC similar to 2813 degreesC conditions. The activation energy E-a was 57 kJ/mol for 0.0050%[S], 95 kJ/mol for 0.012%[S], 165 kJ/mol for 0.140%[S]. The resistance of sulphur on nitrogen removal decreased with the temperature rose, and disappeared at 2630 degreesC. Based on the results obtained, it has been answered why the nitrogen in liquid steel can be decreased rapidly by carbon-oxygen reaction under very high oxygen and sulphur content conditions during the BOF, EAF, VOD and AOD steelmaking processes.