Polyolefins that bear a chiral side chain(typically an isobutyl group)experience a so-called macromolecularamplification of chirality:the chiral side-chain induces a slight preference for either tg or tg(?) main chain...Polyolefins that bear a chiral side chain(typically an isobutyl group)experience a so-called macromolecularamplification of chirality:the chiral side-chain induces a slight preference for either tg or tg(?) main chain conformation.Thisslight conformational bias is amplified cooperatively along the chain,and results in preferred chirality of the main chainhelical conformations.As a result,these polymers display a liquid-crystal(LC)phase both in solution and,in the melt as atransient phase on the way to crystallization.The existence of two processes(melt-LC and LC-crystal transitions)results inunconventional behaviors that were first analyzed by Pino and collaborators back in 1975.These polymers also offer a meansto test the structural consequences of recently introduced crystallization schemes.These schemes postulate the formation of atransient liquid-crystal phase as a general scheme for polymer crystallization.展开更多
The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufact...The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufacturing. A new method is developed based on hydrostatic suspension principle in order to determine the two coefficients with high measurement accuracy. Two silicon single crystal samples with known density are immersed into a sealed vessel full of DSL-2329. The density of liquid is adjusted with varying liquid temperature and static pressure, so that the hydrostatic suspension of two silicon single crystal samples is achieved. The compression and thermal expansion coefficients are then calculated by using the data of temperature and static pressure at the suspension state. One silicon single crystal sample can be suspended at different state, as long as the liquid temperature and static pressure function linearly according to a certain mathematical relationship. A hydrostatic suspension experimental system is devised with the maximal temperature control error ±50 μK; Silicon single crystal samples can be suspended by adapting the pressure following the PID method. By using the method based on hydrostatic suspension principle, the two key coefficients can be measured at the same time, and measurement precision can be improved due to avoiding the influence of liquid surface tension. This method was further validated experimentally, where the mixture of 1, 2, 3-tribromopropane and 1,2-dibromoethane is used as DSL-2329. The compressibility and thermal expansion coefficients were measured, as 8.5′10–4 K–1 and 5.4′10–10 Pa–1, respectively.展开更多
Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible ’H-NMR spectrometer. ...Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible ’H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2<sup> </sup>10 s<sup>-1</sup>), higher temperature melting （300℃ ）, lower temperature spinning （280℃ ） and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.展开更多
Influence of structural variations of N-vinylimidazolium tetrahalogenidoferrate(III) magnetic ionic liquids(MILs) on thermal properties was investigated. Using Gaussian09/B3 PW91/6-311 G(2d, p) density functional meth...Influence of structural variations of N-vinylimidazolium tetrahalogenidoferrate(III) magnetic ionic liquids(MILs) on thermal properties was investigated. Using Gaussian09/B3 PW91/6-311 G(2d, p) density functional methods, the microstructure of the MILs were analyzed. With differential scanning calorimeter(DSC) and thermogravimetric analysis(TGA), the thermal properties of the MILs were performed. The results showed that the interaction energies of ion pairs decreased, the crystallization temperature increased first and then decreased, and the surfusion first decreased and then increased with the elongation of the alkyl chain length on cation;with the increase of Br atom, the interaction energies of ion pairs increased;the interaction energies of ion pairs increased in the MILs with the same cation or anion, the nature of polarity of MILs increased and the melting point rose;as the cation or anion in MILs had a smaller size, it could have the solidsolid transition temperature. The results indicated that the decomposition temperature with the same type of MILs increased with the interaction energies of ion pairs. The interaction energy of ion pairs can be used to illuminate the correlation between the thermal properties and the structure of MILs. ILs possesses the properties of macromolecular.展开更多
The effect of convective flow on a spherical crystal growth in the undercooled melt with a moderate far field flow is studied. The asymptotic solution of the evolution of the interface of the spherical crystal growth ...The effect of convective flow on a spherical crystal growth in the undercooled melt with a moderate far field flow is studied. The asymptotic solution of the evolution of the interface of the spherical crystal growth is obtained by the matched asymptotic expansion method. The analytic result shows that the convective flow in the undercooled melt has a strong effect on the evolution of spherical crystal growth. The convective flow induced by the far field flow makes the interface of the growing spherical crystal enhance its growth velocity in the upstream direction of the far field flow and inhibit growth in the downstream direction, and the interface of the decaying spherical crystal further decay in the upstream direction and inhibit decay in the downstream direction. The maximum growth velocity of the interface of the spherical crystal influenced by the far field flow is obtained.展开更多
A series of thermotropic liquid crystalline polyesteramides with differ-ent sequence structure based on dimethylbenzidine (DMBD), bisphenol-A(BPA) and p-terephthalyl chloride (TPC) was synthesized by changing the feed...A series of thermotropic liquid crystalline polyesteramides with differ-ent sequence structure based on dimethylbenzidine (DMBD), bisphenol-A(BPA) and p-terephthalyl chloride (TPC) was synthesized by changing the feeding order of monomers inlow temperature solution polycondensation system. By means of NMR and a computer pro-gram the sequence structure parameters were measured. The effect of sequence structureon liquid crystalline phase transition temperature of PEAs obtained was investigated.展开更多
Several novel aromatic liquid crystalline copolyesters with regular sequence structure were prepared by melt Sehotten-Baumann polycondensation via complex monomer. Polarizing microscope with hot stage, thermal analysi...Several novel aromatic liquid crystalline copolyesters with regular sequence structure were prepared by melt Sehotten-Baumann polycondensation via complex monomer. Polarizing microscope with hot stage, thermal analysis and X-ray diffraction were used to investigate the structure and properties of the copolyesters. The effects of structural units, such as flexible spacer, noncolinear meta-linked phenylene unit, crankshaft unit, kink with flexible bridging unit and various substituted benzene rings on melting temperature of aromatic copolyesters were studied and discussed on the basis of crystalline structure of the polymers.展开更多
Two-dimensional(2D)melting is a fundamental research topic in condensed matter physics,which can also provide guidance on fabricating new functional materials.Nevertheless,our understanding of 2D melting is still far ...Two-dimensional(2D)melting is a fundamental research topic in condensed matter physics,which can also provide guidance on fabricating new functional materials.Nevertheless,our understanding of 2D melting is still far from being complete due to existence of possible complicate transition mechanisms and absence of effective analysis methods.Here,using Monte Carlo simulations,we investigate 2D melting of 60°rhombs which melt from two different surface-fullycoverable crystals,a complex hexagonal crystal(cHX)whose primitive cell contains three rhombs,and a simple rhombic crystal(RB)whose primitive cell contains one rhomb.The melting of both crystals shows a sequence of solid,hexatic in molecular orientation(Hmo),and isotropic phases which obey the Berezinskii-Kosterlitz-Thouless-Halperin-Nelson-Young(BKTHNY)theory.However,local polymorphic configuration(LPC)based analysis reveals different melting mechanisms:the cHX-Hmotransition is driven by the proliferation of point-like defects during which defect-associated LPCs are generated sequentially,whereas the RB-Hmotransition is driven by line defects where defect-associated LPCs are generated simultaneously.These differences result in the observed different solid-Hmotransition points which areφA=0.812 for the cHX-HmoandφA=0.828 for the RB-Hmo.Our work will shed light on the initial-crystal-dependence of 2D melting behavior.展开更多
文摘Polyolefins that bear a chiral side chain(typically an isobutyl group)experience a so-called macromolecularamplification of chirality:the chiral side-chain induces a slight preference for either tg or tg(?) main chain conformation.Thisslight conformational bias is amplified cooperatively along the chain,and results in preferred chirality of the main chainhelical conformations.As a result,these polymers display a liquid-crystal(LC)phase both in solution and,in the melt as atransient phase on the way to crystallization.The existence of two processes(melt-LC and LC-crystal transitions)results inunconventional behaviors that were first analyzed by Pino and collaborators back in 1975.These polymers also offer a meansto test the structural consequences of recently introduced crystallization schemes.These schemes postulate the formation of atransient liquid-crystal phase as a general scheme for polymer crystallization.
基金Supported by National Natural Science Foundation of China(Grant No.51105347)National Key Technology R&D Program of Ministry of Science and Technology of China(Grant No.2011BAI02B03)
文摘The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufacturing. A new method is developed based on hydrostatic suspension principle in order to determine the two coefficients with high measurement accuracy. Two silicon single crystal samples with known density are immersed into a sealed vessel full of DSL-2329. The density of liquid is adjusted with varying liquid temperature and static pressure, so that the hydrostatic suspension of two silicon single crystal samples is achieved. The compression and thermal expansion coefficients are then calculated by using the data of temperature and static pressure at the suspension state. One silicon single crystal sample can be suspended at different state, as long as the liquid temperature and static pressure function linearly according to a certain mathematical relationship. A hydrostatic suspension experimental system is devised with the maximal temperature control error ±50 μK; Silicon single crystal samples can be suspended by adapting the pressure following the PID method. By using the method based on hydrostatic suspension principle, the two key coefficients can be measured at the same time, and measurement precision can be improved due to avoiding the influence of liquid surface tension. This method was further validated experimentally, where the mixture of 1, 2, 3-tribromopropane and 1,2-dibromoethane is used as DSL-2329. The compressibility and thermal expansion coefficients were measured, as 8.5′10–4 K–1 and 5.4′10–10 Pa–1, respectively.
文摘Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible ’H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2<sup> </sup>10 s<sup>-1</sup>), higher temperature melting （300℃ ）, lower temperature spinning （280℃ ） and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.
基金Funded by the Special Funds of the National Natural Science Foundation of China(No.81903579)the Natural Science Basis Research Plan in Shaanxi Province of China(No.2018JM7079)the Cultivating Special Funds of the National Natural Science Foundation of China from Xi’an Medical University(No.2017GJFY12).
文摘Influence of structural variations of N-vinylimidazolium tetrahalogenidoferrate(III) magnetic ionic liquids(MILs) on thermal properties was investigated. Using Gaussian09/B3 PW91/6-311 G(2d, p) density functional methods, the microstructure of the MILs were analyzed. With differential scanning calorimeter(DSC) and thermogravimetric analysis(TGA), the thermal properties of the MILs were performed. The results showed that the interaction energies of ion pairs decreased, the crystallization temperature increased first and then decreased, and the surfusion first decreased and then increased with the elongation of the alkyl chain length on cation;with the increase of Br atom, the interaction energies of ion pairs increased;the interaction energies of ion pairs increased in the MILs with the same cation or anion, the nature of polarity of MILs increased and the melting point rose;as the cation or anion in MILs had a smaller size, it could have the solidsolid transition temperature. The results indicated that the decomposition temperature with the same type of MILs increased with the interaction energies of ion pairs. The interaction energy of ion pairs can be used to illuminate the correlation between the thermal properties and the structure of MILs. ILs possesses the properties of macromolecular.
基金the National Basic Research Program of China (the Project 973) (2006CB605205)the National Natural Science Foundation of China (10672019)
文摘The effect of convective flow on a spherical crystal growth in the undercooled melt with a moderate far field flow is studied. The asymptotic solution of the evolution of the interface of the spherical crystal growth is obtained by the matched asymptotic expansion method. The analytic result shows that the convective flow in the undercooled melt has a strong effect on the evolution of spherical crystal growth. The convective flow induced by the far field flow makes the interface of the growing spherical crystal enhance its growth velocity in the upstream direction of the far field flow and inhibit growth in the downstream direction, and the interface of the decaying spherical crystal further decay in the upstream direction and inhibit decay in the downstream direction. The maximum growth velocity of the interface of the spherical crystal influenced by the far field flow is obtained.
基金This work was supported by Special Foundation of State Education Committee for Doctoral Program
文摘A series of thermotropic liquid crystalline polyesteramides with differ-ent sequence structure based on dimethylbenzidine (DMBD), bisphenol-A(BPA) and p-terephthalyl chloride (TPC) was synthesized by changing the feeding order of monomers inlow temperature solution polycondensation system. By means of NMR and a computer pro-gram the sequence structure parameters were measured. The effect of sequence structureon liquid crystalline phase transition temperature of PEAs obtained was investigated.
文摘Several novel aromatic liquid crystalline copolyesters with regular sequence structure were prepared by melt Sehotten-Baumann polycondensation via complex monomer. Polarizing microscope with hot stage, thermal analysis and X-ray diffraction were used to investigate the structure and properties of the copolyesters. The effects of structural units, such as flexible spacer, noncolinear meta-linked phenylene unit, crankshaft unit, kink with flexible bridging unit and various substituted benzene rings on melting temperature of aromatic copolyesters were studied and discussed on the basis of crystalline structure of the polymers.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11874277,21621004,12104453,and 12090054)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB33030300)
文摘Two-dimensional(2D)melting is a fundamental research topic in condensed matter physics,which can also provide guidance on fabricating new functional materials.Nevertheless,our understanding of 2D melting is still far from being complete due to existence of possible complicate transition mechanisms and absence of effective analysis methods.Here,using Monte Carlo simulations,we investigate 2D melting of 60°rhombs which melt from two different surface-fullycoverable crystals,a complex hexagonal crystal(cHX)whose primitive cell contains three rhombs,and a simple rhombic crystal(RB)whose primitive cell contains one rhomb.The melting of both crystals shows a sequence of solid,hexatic in molecular orientation(Hmo),and isotropic phases which obey the Berezinskii-Kosterlitz-Thouless-Halperin-Nelson-Young(BKTHNY)theory.However,local polymorphic configuration(LPC)based analysis reveals different melting mechanisms:the cHX-Hmotransition is driven by the proliferation of point-like defects during which defect-associated LPCs are generated sequentially,whereas the RB-Hmotransition is driven by line defects where defect-associated LPCs are generated simultaneously.These differences result in the observed different solid-Hmotransition points which areφA=0.812 for the cHX-HmoandφA=0.828 for the RB-Hmo.Our work will shed light on the initial-crystal-dependence of 2D melting behavior.
