A Preliminary Study on Fluid Inclusions and Mineralization of Xitieshan Sedimentary-Exhalative (SEDEX) Lead-Zinc Deposit

The Xitieshan lead-zinc deposit is located at the northern margin of the Qaidam Basin, Qinghai Province, China, and had developed a complete marine sedimentary-exhalative system. Our preliminary study of ore-forming fluids shows that fluid inclusions in quartz from altered stockwork rocks that represent the pipe facies have a wide range of temperature and salinity. The intense fluid activities are characteristics of the pipe facies of the exhalative system. Fluid inclusions in carbonates near the unstratified ore bodies hosted in the thick-bedded marble which represents vent-proximal facies are large in size and have moderate to high temperatures. They represent unerupted sub-seafloor fluid activity. Fluids in altered stockwork rocks and carbonates have similar H20-NaCI-CO2 system, both belonging to the sedimentary-exhalative system. The fluids migrate from the pipe facies to the unstratified ore bodies. Boiling of the fluids causes the separation of CO2 vapor and liquid H2O. When the fluids migrate into the unconsolidated thick-bedded marble, the escape of CO2, decreasing temperature and pressure as well as some involvement of seawater into the fluids result in the unmixing of fluids with high and low salinity and deposition of ore-forming materials. The two unmixed fluids were trapped in unconsolidated carbonates and the ore-forming materials were deposited in the unconsolidated carbonates to form the sedimentary-exhalative type unstratified ore bodies. The oreforming temperature of unstratified ore bodies is up to high temperature indicating that there is a huge ore-forming potential in its deep.

LA-ICP-MS zircon U-Pb age of rhyolitic lithic-crystal tuffs in Erdaohezi lead-zinc deposit,Inner Mongolia

Erdaohezi lead-zinc deposit belongs to the Derbugan metallogenic belt lying on the northwestern Hailaer-Genhe Mesozoic volcanic basin, located on the western slope of the Da Hinggan Mountains. The deposit is considered as one of the hypabyssal low-temprature hydrothermal lead-zinc deposits associated with volca- nism. In order to lay the foundation on studying its diagenesis and mineralization ages, the detailed studies were carried out by dating the host rocks （i. e. rhyolitic lithic-crystal tufts） using zircon LA-ICP-MS U-Pb method. The dating results show three groups ot! ages. The first group is the captured zircons （the weighted mean ^206pb/238U age as 175.6± 2.3 Ma, MSWD = 0.70, n = 3）. The second group can be regarded as the rock- forming age （the weighted mean ^206pb/238U age as 165.3± 1.9 Ma, MSWD = 2.40, n = 14）. The third group should represent the late stage of the magmatic evolution （the weighted mean ^206pb/238U age as 161.0 ± 3.1 Ma, MSWD = 0.86, n = 4）. According to the ages and the crystal form or CL image characteristics of zircons, it is determined that the diagenesis occurred in the late Middle Jurassic. Based on the regional geology and geo- chronological research, the acidic pyroclastic rocks are space accompaniment and time connection with the Tamu- langou Formation intermediate-mafic volcanic rocks. Both of them constitute the host rocks of the deposit together. The rock combination also provides favorable conditions for large-scale silver, lead and zinc mineralization in this area.

Application of Tectono Geochemical Study in Deep Concealed Ore Body Exploration--As the Huize Super-Large Lead-Zinc Deposit an exemple

1 Geological Background of Minerlization or Geologic Setting The northeast of Yunnan1 Pb-Zn-Ag-Ge polymetallic ore district is an important part of the southwestern margin of the Yangtze block Sichuan-Yunnan-Guizhou

Geochronology and geochemistry of the ore-bearing intrusion in the Longgen Lead-Zinc deposit in Tibet and its geological significance

1 Introduction The Longgen Lead-Zinc deposit is located in the southern Gangdise-Nyainqentantanglha plate and belongs to the western section of the Nyainqentantanglha copper-lead-zinc-silver metallogenic belt.In this paper,

Ore-controlling Regularitiesof Structureinthe Lehong Lead-zinc Deposit, Northeastern Yunnan

1 Introduction The Lehonglead-zincdeposit is a large-sized Pb-Zn depositnewly found in recent years in the Sichuan-Yunnan-Guizhou Lead-zinc Poly-metallic Mineralization Area,which occurrenceis strictly

“Structure-Lithologic-Fluid” Metallogenic Coupling of the Wuzhishan Lead-Zinc Deposit in Puding, Guizhou Province

1 Introduction The Wuzhishan lead-zinc ore-concentrated area in Puding is located in the east of the Sichuan,Guizhou and Yunnan lead-zinc metallogenic domain,with the Youjiang-Nanpan River metallogenic province to the

Spectroscopic Features and Formation Conditions of Sphalerite in the Lead-Zinc Deposit, Guangdong,China

Electron paramagnetic resonance spectra, absorption spectra, cathodoluminescence spectra and infrared spectra of sphalerite from the Lechang remoulded sedimentary lead-zinc deposit have been studied so as to provide microscopic evidence for the formation conditions and mineralization stages of the deposit as well as the geochemical processes of mineralization. On the basis of thermodynamic calculations, the stable fields of sphalerite from different mineralization stages were determined and are shown in logfs_2-logfo_2 diagrams; furthermore. the physico-chemical conditions of mineralization and the properties of mineralization solutions are discussed so that reliability of the genetic information provided by the spectroscopy of sphalerite may also be verified. It is suggested that the temperature and pH value of the mineralization system decrease, and so do the fugacities of O_2, S_2, H_2. and H_2S and the activities of HS^- and SO_4^(2-) from the early to late stages of minerahzation.

Metallogenic Prediction of the Peripheral Areas of the Xiyi Concealed Lead-Zinc Deposit in Baoshan City, Yunnan Province

The newly-discovered Xiyi lead-zinc deposit is a large deposit located in the north central Baoshan block of the southern Sanjiang metallogenic belt section, Southwest China.The surface of the deposit is mainly covered by eluvial-deluvial lateritic layer, without any mineralized outcrops. The main concealed orebody V3 is buffed in the depth of 300-500m. The orebodies are controlled by certain stratigraphic horizons, and most are cut by strata with a high angle, while a few occur along the strata. The direct wall rocks are calcisiltite, calclithite, bioclastic calcarenite,

New Zircon U-Pb Age of Devonian Granites in the Niukutou Lead-Zinc Deposit, Qinghai Province and its Significance for Prospecting Blind Orebodies

Object The Eastern Kunlun Orogen(EKO), An important part of the Tethyan orogenic belt in the northern margin of the Qinghai–Tibet Plateau(Li et al., 2014; Ren Haidong et al., 2016), is a key area for geological research and mineral exploration(Li Bile et al., 2015). The Qimantag Mountain is located in middle segment of the EKO, which has experienced the Early Paleozoic and Late Paleozoic–Early

LAWS GOVERNING THE DISTRIBUTION OF LEAD-ZINC DEPOSITS IN CHINA

An attempt is made in this paper to describe the following laws governing the distribution of lead-zinc deposits in China: spatial distribution laws, temporal distribution laws, deep level control laws, and deposits association and zoning laws.

Experiment and Achievement Enlightenment of Integrated Prospecting of Carbonate-Type Lead-Zinc Deposits in the Sichuan-Yunnan-Guizhou Region of China

Mississippi-Valley＇s carbonate-type （MVT） lead-zinc deposits are the most important type of lead-zinc deposits in the southwest of China. In 2013, China Geological Survey Bureau deployed a project named ＂Experimental Investigation of Integrated Prospecting Technology for Concealed Carbonate-Type Lead-Zinc Deposits in the Region of Sichuan, Yunnan and Guizhou Provinces＂. This project has been implemented by the Chengdu Center of China Geological Survey since 2013, and the project has run for 3 years. The general objective of this project is to establish an effective and adaptable integrated prospecting methodology （including geological, geophysical and geochemical techniques） in search for deep concealed lead-zinc deposits.

Isotopic Compositions of Sulfur in the Jinshachang Lead–Zinc Deposit, Yunnan, China, and its Implication on the Formation of Sulfur-Bearing Minerals

The Jinshachang lead-zinc deposit is mainly hosted in the Upper Neoproterozoic carbonate rocks of the Dengying Group and located in the Sichuan-Yunnan-Guizhou （SYG） Pb-Zn-Ag multi- metal mineralization area in China. Sulfides minerals including sphalerite, galena and pyrite postdate or coprecipitate with gangue mainly consisting of fluorite, quartz, and barite, making this deposit distinct from most lead-zinc deposits in the SYG. This deposit is controlled by tectonic structures, and most mineralization is located along or near faults zones. Emeishan basalts near the ore district might have contributed to the formation of orebodies. The j34S values of sphalerite, galena, pyrite and barite were estimated to be 3.6‰-13.4‰, 3.7‰-9.0‰, -6.4‰ to 29.2‰ and 32.1‰34.7‰, respectively. In view of the similar δ34S values of barite and sulfates being from the Cambrian strata, the sulfur of barite was likely derived from the Cambrian strata. The homogenization temperatures （T ≈ 134--383℃） of fluid inclusions were not suitable for reducing bacteria, therefore, the bacterial sulfate reduction could not have been an efficient path to generate reduced sulfur in this district. Although thermochemical sulfate reduction process had contributed to the production of reduced sulfur, it was not the main mechanism. Considering other aspects, it can be suggested that sulfur of sulfides should have been derived from magmatic activities. The δ34S values of sphalerite were found to be higher than those of coexisting galena. The equilibrium temperatures calculated by using the sulfur isotopic composition of mineral pairs matched well with the homogenization temperature of fluid inclusions, suggesting that the sulfur isotopic composition in ore-forming fluids had reached a partial equilibrium.

An experimental study on metal precipitation driven by fluid mixing: implications for genesis of carbonate-hosted lead–zinc ore deposits

A type of carbonate-hosted lead–zinc(Pb–Zn)ore deposits, known as Mississippi Valley Type(MVT)deposits, constitutes an important category of lead–zinc ore deposits. Previous studies proposed a fluid-mixing model to account for metal precipitation mechanism of the MVT ore deposits, in which fluids with metal-chloride complexes happen to mix with fluids with reduced sulfur, producing metal sulfide deposition. In this hypothesis, however, the detailed chemical kinetic process of mixing reactions, and especially the controlling factors on the metal precipitation are not yet clearly stated. In this paper, a series of mixing experiments under ambient temperature and pressure conditions were conducted to simulate the fluid mixing process, by titrating the metal-chloride solutions, doping withor without dolomite, and using NaHS solution. Experimental results, combined with the thermodynamic calculations, suggest that H_2S, rather than HS^-or S^(2-),dominated the reactions of Pb and/or Zn precipitation during the fluid mixing process, in which metal precipitation was influenced by the stability of metal complexes and the pH. Given the constant concentrations of metal and total S in fluids, the pH was a primary factor controlling the Pb and/or Zn metal precipitation. This is because neutralizing or neutralized processes for the ore-forming fluids can cause instabilities of Pb and/or Zn chloride complexes and re-distribution of sulfur species, and thus can facilitate the hydrolysis of Pb and Zn ions and precipitation of sulfides. Therefore, a weakly acidic to neutral fluid environment is most favorable for the precipitation of Pb and Zn sulfides associated with the carbonate-hosted Pb–Zn deposits.

Metallogeny of the Baiyangping Lead-Zinc Polymetallic Ore Concentration Area, Northern Lanping Basin of Yunnan Province, China

The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang （the Sanjiang） area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.

Ore-controlling effect of structure and distribution of deep rock mass on Pb-Zn deposit in Qingchengzi ore concentration area,Liaoning

Qingchengzi ore concentration area in Liao-Ji rift is an important lead-zinc ore area of China,and the deep prospecting in this area has great prospects.Based on the spatial occurrence of ore bodies the Pb-Zn deposit can be divided into three types:layered,vein-shaped and pinnate.The deep geological conditions in this area are deduced by analyzing the tectonic evolution process and rock mass gravity inversion.The tectonic evolution of Liao-Ji rift can be divided into three stages:Paleoproterozoic extension period,Mesoproterozoic compression period and Mesozoic reactivation period.The magmatic activities in the Indosinian epoch led to the distribution pattern of the present deposits.According to the gravity inversion,Shuangdinggou-and Xinling rock masses on the north and south sides of the mining area are connected in the deep.The connected rock body might be distributed in the entire mining area.Xinling rock mass may be a branch extending from Shuangdinggou rock mass along the northeast trending fault,the connected rocks provide magmatic hydrothermal fluid for the final,folds and faults result in different types of ore body shapes.

New Constraints on the Environmental Impact of Iron Oxides and Lead-Zinc Mines in Red Sea Hills,Egypt

Iron oxides and lead-zinc deposits in host rocks located in ten drainage basins in the coastal plain of the Red Sea,Egypt,have been subjected to important mining activities.The drainage basins were analyzed to estimate the transportations of these minerals. Fourteen soil samples and fifteen plant samples were collected from sites located in the basin and also in neighboring area and chemically analyzed.In

Isotope Geochemistry of the Xinchang -Yongjia Silver (Lead-Zinc)Ore Belt in Eastern Zhejiang Province

In the Xinchang-Yongjia silver (lead-zinc) ore belt, there mainly occur the large to medium-sized Haoshi, Bamao, Dalingkou and Wubu silver deposits or silver-bearing lead-zinc deposits. On the basis of researches on these typical deposits, the mechanism of leaching-drawing mineralization of Mesozoic geothermal water and the related model are put forward in this paper in the light of the time interval between rock and formation ages as well as hydrogen, oxygen, sulphur and lead isotope geochemical characteristics. The major metallogenic process occurred in volcanic rock layers. The ore-forming fluids are geothermal water coming from meteoric water and circulating at shallow layers. This geothermal water leached and absorbed ore-forming materials from its country rocks during its flowing (such metallogenic elements as silver, lead-zinc and sulphur mainly came from consolidated volcanic rocks), leading to the formation of meso - epithermal silver deposits.

滇西勐糯铅锌矿区赋矿围岩地球化学特征与地质意义

勐糯铅锌矿区位于保山-镇康地块勐糯向斜东翼,是三江成矿带中重要的大型铅锌矿床。矿区内志留系中统上仁和桥组下段(S21)为主要赋矿层位,其中结晶灰岩为主要的赋矿围岩,含矿层顶底板围岩为板理化灰岩、板理化钙质泥岩。区内结晶灰岩及其他围岩稀土配分模式相似,均为右倾型及负Eu异常,指示其具有相似的沉积环境及成岩机制。同时Al2O3-SiO2岩石热水成因模式图、U-Th关系图及Al-Fe-Mn三角图解指示矿区围岩并非热水沉积,均为正常海相沉积。围岩样品U/Th <0.75,Sr/Cu>5,V/Cr <2,Ce微弱正异常及较低的Sr值,指示沉积环境为开放式的氧化浅海环境,沉积期间气候较为干燥,受到部分陆源碎屑影响。结晶灰岩ΣREE为57.11×10^-6,明显低于其他围岩ΣREE值232.02×10^-6,且LaN/YbN为8.81低于其他围岩11.17,可能为热液的淋虑作用导致结晶灰岩稀土元素流失。综合分析认为,结晶灰岩原岩为泥晶生物碎屑灰岩,其形成先后经历了2期构造热事件,早期构造作用使其原岩发生破碎,主要为脆性变形,含矿热液沿裂隙注入,使破碎的原岩发生重结晶,形成颗粒较为粗大的结晶灰岩;晚期构造作用对早期构造形成的结晶灰岩局部进行叠加改造,发生韧性变形,使结晶灰岩糜棱岩化,形成颗粒粗细不均的糜棱岩化灰岩。结晶灰岩的破碎裂隙为含矿热液提供良好的运移通道及容矿空间,并可能提供部分成矿物质,顶底板围岩对含矿热液一定封闭作用。