This paper provides a deep evaluation of the energy consumption of routing protocols. The evaluation is done along with other metrics such as throughput and packet delivery ratio (PDR). We introduce two more metrics t...This paper provides a deep evaluation of the energy consumption of routing protocols. The evaluation is done along with other metrics such as throughput and packet delivery ratio (PDR). We introduce two more metrics to capture the efficiency of the energy consumption: e-throughput and e-PDR. Both are ratios in relation to the energy. We consider the three low layers of the stack. Three types of routing protocols are used: proactive, reactive, and hybrid. At the MAC and PHY layer, three radio types are considered: 802.11a/b/g. Finally, the number of nodes is varying in random topologies, with nodes being static or mobile. Simulations are conducted using NS3. The parameters of a real network interface card are used. From the results in mobile position scenarios, no protocol is outperforming the others;even if OLSR has the lowest energy consumption, most of the time. However, in constant position scenarios, AODV consumed a lower energy, apart from the scenarios using the 802.11a standard where HWMP energy consumption is the lowest. Regarding the energy efficiency, AODV protocols provided the best e-throughput and OLSR the best e-PDR in overall configurations. A framework for selecting energy-efficient routing protocol depending on network characteristics is proposed at the end.展开更多
A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact f...A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact factors in route calculation through the cross-layer operation mechanism： the node available bandwidth, the node load, the link delivery rate, and the link interference, and thus the effect of route selection is optimized greatly. The simulation results show that the proposed CL-OLSR protocol can not only improve the network throughput to a large extent, but also reduce the end-to-end delay, while achieving load balance route results.展开更多
以优化的链路状态路由(optimized link state routing,OLSR)协议为原型,为无线Mesh网设计了一种基于节点区分和跨层设计的优化链路状态路由协议NDCL-OLSR(node-differentia-tion and cross-layer based optimized link state routing)....以优化的链路状态路由(optimized link state routing,OLSR)协议为原型,为无线Mesh网设计了一种基于节点区分和跨层设计的优化链路状态路由协议NDCL-OLSR(node-differentia-tion and cross-layer based optimized link state routing).该协议采用了一种新的路由判据NDCLM(node-differentiation and cross-layer metric),在路由计算过程中通过跨层操作机制综合考虑了节点当前负载和链路投递率2个因素对链路质量的影响,并且对节点的类型进行了区分,使得网络流量尽量绕开业务繁忙的超网关节点(SGW),从而大大优化了路由选择的效果.仿真结果表明,NDCL-OLSR能够从很大程度上提高网络的吞吐量,降低端到端的延时,并且能够达到负载均衡的路由效果.展开更多
在研究无线Mesh网拓扑结构和业务模式的基础上,深度剖析适合其特性的路由协议类型,得出先验式的逐跳路由最适合无线Mesh网的结论。在此基础上,以典型的先验式逐跳路由协议OLSR(Optimized Link State Rou-ting)为原型,对其中的邻居表结构...在研究无线Mesh网拓扑结构和业务模式的基础上,深度剖析适合其特性的路由协议类型,得出先验式的逐跳路由最适合无线Mesh网的结论。在此基础上,以典型的先验式逐跳路由协议OLSR(Optimized Link State Rou-ting)为原型,对其中的邻居表结构和MPR(Multipoint Relay)选择算法进行了改进,通过引入"MPR当选频度"的概念,克服了OLSR协议在无线Mesh网环境中资源利用不充分的缺陷。仿真实验的结果也验证了所提出的EOLSR协议对网络性能确实有较大程度的提升,能够在基本不增加协议开销的前提下,有效地增加网络吞吐量,降低端到端的平均延时。展开更多
文摘This paper provides a deep evaluation of the energy consumption of routing protocols. The evaluation is done along with other metrics such as throughput and packet delivery ratio (PDR). We introduce two more metrics to capture the efficiency of the energy consumption: e-throughput and e-PDR. Both are ratios in relation to the energy. We consider the three low layers of the stack. Three types of routing protocols are used: proactive, reactive, and hybrid. At the MAC and PHY layer, three radio types are considered: 802.11a/b/g. Finally, the number of nodes is varying in random topologies, with nodes being static or mobile. Simulations are conducted using NS3. The parameters of a real network interface card are used. From the results in mobile position scenarios, no protocol is outperforming the others;even if OLSR has the lowest energy consumption, most of the time. However, in constant position scenarios, AODV consumed a lower energy, apart from the scenarios using the 802.11a standard where HWMP energy consumption is the lowest. Regarding the energy efficiency, AODV protocols provided the best e-throughput and OLSR the best e-PDR in overall configurations. A framework for selecting energy-efficient routing protocol depending on network characteristics is proposed at the end.
基金supported by the Fundamental Research Funds for the Central Universities under Grant No.ZYGX2009j006Foundation of Science & Technology Department of Sichuan Province under Grant No.2011GZ0192
文摘A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact factors in route calculation through the cross-layer operation mechanism： the node available bandwidth, the node load, the link delivery rate, and the link interference, and thus the effect of route selection is optimized greatly. The simulation results show that the proposed CL-OLSR protocol can not only improve the network throughput to a large extent, but also reduce the end-to-end delay, while achieving load balance route results.
文摘以优化的链路状态路由(optimized link state routing,OLSR)协议为原型,为无线Mesh网设计了一种基于节点区分和跨层设计的优化链路状态路由协议NDCL-OLSR(node-differentia-tion and cross-layer based optimized link state routing).该协议采用了一种新的路由判据NDCLM(node-differentiation and cross-layer metric),在路由计算过程中通过跨层操作机制综合考虑了节点当前负载和链路投递率2个因素对链路质量的影响,并且对节点的类型进行了区分,使得网络流量尽量绕开业务繁忙的超网关节点(SGW),从而大大优化了路由选择的效果.仿真结果表明,NDCL-OLSR能够从很大程度上提高网络的吞吐量,降低端到端的延时,并且能够达到负载均衡的路由效果.
文摘在研究无线Mesh网拓扑结构和业务模式的基础上,深度剖析适合其特性的路由协议类型,得出先验式的逐跳路由最适合无线Mesh网的结论。在此基础上,以典型的先验式逐跳路由协议OLSR(Optimized Link State Rou-ting)为原型,对其中的邻居表结构和MPR(Multipoint Relay)选择算法进行了改进,通过引入"MPR当选频度"的概念,克服了OLSR协议在无线Mesh网环境中资源利用不充分的缺陷。仿真实验的结果也验证了所提出的EOLSR协议对网络性能确实有较大程度的提升,能够在基本不增加协议开销的前提下,有效地增加网络吞吐量,降低端到端的平均延时。
