Characterization and adsorption behaviors of a novel synthesized mesoporous silica coated carbon composite

A novel mesoporous silica coated carbon composite(denoted SEG) with hierarchical pore structure has been successfully prepared in an aqueous solution that contains triblock copolymer template, aluminum chloride, siliceous source and expanded graphite. Textural property and morphology of the SEG composite were characterized by the combination of X-ray diffraction, N_2 adsorption–desorption, scanning electron microscopy,transmission electron microscopy and Fourier transform infrared measurements. Results show that mesoporous silica is steadily and uniformly grown on the surface of the graphite slices and the thickness of the silica layer can be finely tuned according to the silica/C molar ratio in the initial reaction solution. This newly synthesized SEG composite shows greatly increased adsorption capacity to methylene blue than the pristine expanded graphite in the batch tests. Both Langmuir and Frendlich models were further used to evaluate the adsorption isotherms of methylene blue over expanded graphite and SEG samples with different silica contents. Finally, pseudosecond-order model was used to describe the kinetics of methylene blue over expanded graphite and the silica-carbon composites.

Adsorption of benzene, cyclohexane and hexane on ordered mesoporous carbon

Ordered mesoporous carbon（OMC） with high specific surface area and large pore volume was synthesized and tested for use as an adsorbent for volatile organic compound（VOC）disposal. Benzene, cyclohexane and hexane were selected as typical adsorbates due to their different molecular sizes and extensive utilization in industrial processes. In spite of their structural differences, high adsorption amounts were achieved for all three adsorbates, as the pore size of OMC is large enough for the access of these VOCs. In addition, the unusual bimodal-like pore size distribution gives the adsorbates a higher diffusion rate compared with conventional adsorbents such as activated carbon and carbon molecular sieve. Kinetic analysis suggests that the adsorption barriers mainly originated from the difficulty of VOC vapor molecules entering the pore channels of adsorbents. Therefore, its superior adsorption ability toward VOCs, together with a high diffusion rate, makes the ordered mesoporous carbon a promising potential adsorbent for VOC disposal.

Mesoporous carbon adsorbents from melamine–formaldehyde resin using nanocasting technique for CO_2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine-formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction（XRD）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, thermogravimetric analysis（TGA）, elemental（CHN） analysis, Fourier transform infrared（FTIR） spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO2 capture.The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO2 adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO2 adsorption capacity among the synthesized adsorbents. Breakthrough time and CO2 equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent-CO2 system was found to be reversible with stable adsorption capacity over four consecutive adsorption-desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.

Efficient removal of phosphate from aqueous solution using novel magnetic nanocomposites with Fe_3O_4@SiO_2 core and mesoporous CeO_2 shell

Fe_3O_4@SiO_2 magnetic nanoparticles functionalized with mesoporous cerium oxide（Fe_3O_4@SiO_2@mCeO_2） was fabricated as a novel adsorbent to remove phosphate from water. The prepared adsorbent was characterized by X-ray diffractometry（XRD）, transmission electron microscopy（TEM）, nitrogen adsorption-desorption and vibrating sample magnetometry（VSM）, and its phosphate removal performance was investigated through the batch adsorption studies. Characterization results confirmed that mesoporous cerium oxide was successfully assembled on the surface of Fe_3O_4@SiO_2 nanoparticles, and the synthesized adsorbent possessed a typical core-shell structure with a BET surface area of 195 m^2/g, accessible mesopores of 2.6 nm, and the saturation magnetization of 21.11 emu/g. The newly developed adsorbent had an excellent performance in adsorbing phosphate, and its maximum adsorption capacity calculated from the Langmuir model was 64.07 mg/g. The adsorption was fast, and the kinetic data could be best fitted with the pseudo-second-order kinetic model. The phosphate removal decreased with the increase of solution pH（2 to 10）, while the higher ionic strength slightly promoted the phosphate adsorption. The presence of Cl~– and SO^（2–）_4 could enhance the adsorption of phosphate whereas HCO~–_ 3 had interfering effect on the phosphate adsorption. The adsorption mechanism was studied by analyzing Zeta potential and FTIR spectroscopy, and the results indicated that the replacement of the surface hydroxyl groups by phosphate ions with the formation of inner-sphere complex played a key role in the phosphate adsorption. The spent adsorbent could be quickly separated from aqueous solution with the assistance of the external magnetic field, and the adsorbed phosphate could be effectively desorbed using a 1 mol/L NaOH solution.

Functionalized CMK-3 mesoporous carbon with 2-amino-5-mercapto-1,3,4-thiadiazole for Hg(II) removal from aqueous media

Ordered mesoporous carbon（CMK-3） was synthesized and functionalized with 2-amino-5-mercapto-1,3,4-thiadiazole groups（AMT-OCMK-3） for Hg（Ⅱ） removal from aqueous solution. The modified CMK-3 was characterized by X-ray diffraction, N2adsorption-desorption isotherm, scanning electron microscopy and Fourier transform infrared spectroscopy. The effects of solution pH, contact time, initial Hg（Ⅱ） concentration and matrix effect were studied. The adsorption data were successfully fitted with the Langmuir model, exhibiting high adsorption capacity of 450.45 mg/g of AMT-OCMK-3. In the solid-phase extraction system a series of experimental parameters such as sample flow rate, sample volume,eluent volume and concentration of the eluent solution have been investigated and established for preconcentration of Hg（Ⅱ） in aqueous solution. The results showed that the enrichment factor for Hg（Ⅱ） was 250, the precision（relative standard deviation（RSD）, %） for six replicate measurements was 2.05% and the limit of detection for Hg（Ⅱ） was achieved at0.17 μg/L.

Preparation of MnO2-Al2O3 adsorbent with large specific surface area for fluoride removal

MnO2-Al2O3 （MOAO） binary nanocomposite with a 1：3 MnO2 to Al2O3 molar ratio was synthesized by impregnation technique using mesoporous alumina （MA） precursor. The MOAO product consisted of MA and amorphous MnO2. The manganese valence in MOAO was ＋4, indicative of MnO2 being coated on the surface of MA during the impregnation process. MOAO had a large specific surface area （385.266 m^2/g） and wormhole-like mesoporous structure. The average pore size, which could be precisely controlled over the range of 3.4-4.1 nm. The optimum removal of fluoride was obtained when the initial pH was in the range of 4-10. The defluorination efficiency of MOAO was far superior to that of MA when the initial fluoride concentration exceeded 40 mg/L. The large surface area and bimodal porous structure of MOAO after coating MnO2 may be responsible for the high removal efficiency in the defluorination process.