Towards the selectivity distinction of phenol hydrogenation on noble metal catalysts

Selective hydrogenation of phenol to cyclohexanone is intriguing in chemical industry.Though a few catalysts with promising performances have been developed in recent years,the basic principle for catalyst design is still missing owing to the unclear catalytic mechanism.This work tries to unravel the mechanism of phenol hydro-genation and the reasons causing the selectivity discrepancy on noble metal catalysts under mild conditions.Results show that different reaction pathways always firstly converge to the formation of cyclohexanone under mild conditions.The selectivity discrepancy mainly depends on the activity for cyclohexanone sequential hy-drogenation,in which two factors are found to be responsible,i.e.the hydrogenation energy barrier and the competitive chemisorption between phenol and cyclohexanone,if the specific co-catalyzing effect of H 2 O on Ru is not considered.Based on the above results,a quantitative descriptor,E b(one/pl)/E a,in which E a can be further correlated to the d band center of the noble metal catalyst,is proposed by the first time to roughly evaluate and predict the selectivity to cyclohexanone for catalyst screening.

Endeavors on the development of efficient and sustainable supported metal catalysts for chemical synthesis on solid-liquid interfaces

Supported metal catalysts,particularly for precious metals,have gained increasing attention in green synthetic chemistry.They can make metal-catalyzed organic synthesis more sustainable and economical due to easy separation of product with less metal residue,as well as reusability of the high-cost catalysts.Although great effort has been spent,the precise catalytic mechanism of supported metal-catalyzed reactions has not been clearly elucidated and the development of efficient and stable recyclable catalysts remains challenging.This highlight reveals a“molecular fence”metal stabilization strategy and discloses the metal evolution in Pd-catalyzed C-C bond formation reactions using Nheterocyclic carbene(NHC)-functionalized hypercrosslinked polymer support,wherein the polymeric skeleton isolates or confines the metal species involved in the catalytic reactions,and NHC captures free low-valent metal species in solution and stabilizes them on the support via strong metal-support coordination interaction.This strategy creates a novel route for the development of supported metal catalysts with high stability and provides insights into the reaction mechanism of heterogeneous catalysis.

Catalytic removal of volatile organic compounds using ordered porous transition metal oxide and supported noble metal catalysts

Most of volatile organic compounds （VOCs） are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalysts. Many catalysts including transition metal oxides, mixed metal oxides, and sup‐ported noble metals have been developed. Among these catalysts, the porous ones attract much attention. In this review, we focus on recent advances in the synthesis of ordered mesoporous and macroporous transition metal oxides, perovskites, and supported noble metal catalysts and their catalytic oxidation of VOCs. The porous catalysts outperformed their bulk counterparts. This excel‐lent catalytic performance was due to their high surface areas, high concentration of adsorbed oxy‐gen species, low temperature reducibility, strong interaction between noble metal and support and highly dispersed noble metal nanoparticles and unique porous structures. Catalytic oxidation of carbon monoxide over typical catalysts was also discussed. We made conclusive remarks and pro‐posed future work for the removal of VOCs.

Efficient and Quick Inactivation of SARS Coronavirus and Other Microbes Exposed to the Surfaces of Some Metal Catalysts

Objective To study the two metal catalysts Ag/Al2O3 and Cu/Al2O3 that interdict the transmission pathway for SARS and other respiratory infectious diseases. Methods Two metal catalysts Ag/Al2O3 and Cu/Al2O3 were pressed into wafers. One hundred μL 106 TCID50/mL SARS-CoV, 100 μL 106 PFU/mL recombinant baculovirus expressing hamster’s prion protein (haPrP) protein and roughly 106 E. coli were slowly dropped onto the surfaces of the catalyst wafers and exposed for 5 and 20 min, respectively. After eluted from the surfaces of wafers, the infectivity of viruses and propagation of bacteria were measured. The expression of PrP protein was determined by Western blot. The morphological changes of bacteria were observed by electronic microscopy. Results After exposure to the catalysts surfaces for 5 and 20 min, the infectivity of SARS-CoV in Vero cells and baculovirus in Sf9 cells dropped down to a very low and undetectable level, and no colony was detected using bacteria culture method. The expression of haPrP protein reduced to 21.8% in the preparation of Sf9 cells infected with recombinant baculovirus exposed for 5 min and was undetectable exposed for 20 min. Bacterial membranes seemed to be cracked and the cytoplasm seemed to be effluent from cell bodies. Conclusion Exposures to the surfaces of Ag/Al2O3 and Cu/Al2O3 destroy the replication and propagation abilities of SARS-CoV, baculovirus and E. coli. Inactivation ability of metal catalysts needs to interact with air, utilizing oxygen molecules in air. Efficiently killing viruses and bacteria on the surfaces of the two metal catalysts has a promising potential for air-disinfection in hospitals, communities, and households.

Low-temperature conversion of methane to oxygenates by supported metal catalysts: From nanoparticles to single atoms

Direct cost-effective conversion of abundant methane to high value-added oxygenates(methanol,formic acid,acetic acid,etc.)under mild conditions is prospective for optimizing the structure of energy resources.However,the CAH bond of products is more reactive than that of high thermodynamic stable methane.Exploring an appropriate approach to eliminate the‘‘seesaw effect"between methane conversion and oxygenate selectivity is significant.In this review,we briefly summarize the research progress in the past decade on low-temperature direct conversion of methane to oxygenates in gas-solid-liquid phase over various transition metal(Fe,Cu,Rh,Pd,Au Pd,etc.)based nanoparticle or single-atom catalyst.Furthermore,the prospects of catalyst design and catalysis process are also discussed.

A new approach for the aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid without using transition metal catalysts

The organic compound 2,5-furandicarboxylic acid（FDCA） has been identified by the US Department of Energy（DOE） as a valuable platform chemical for a wide range of industrial applications. Currently, the most popular route for FDCA synthesis is reported to be the oxidation of 5-hydroxymethylfurfural（HMF）by O_2 over the catalysis of noble metals（e.g., Au, Pt, Ru, and Pd）. However, the high costs of noble metal catalysts remain a major barrier for producing FDCA at an industrial scale. Herein, we report a transition metal-free synthesis strategy for the oxidation of HMF to FDCA under O_2 or ambient air. A simple but unprecedented process for the aerobic oxidation of HMF was carried out in organic solvents using only bases as the promoters. According to the high performance liquid chromatography（HPLC） analysis, excellent product yield（91%） was obtained in the presence of NaOH in dimethylformamide（DMF） at room temperature（25 ℃）. A plausible mechanism for the NaOH-promoted aerobic oxidation of HMF in DMF is also outlined in this paper. After the reaction, the sodium salt of FDCA particles were dispersed in the reaction mixture, making it possible for product separation and solvent reuse. The new HMF oxidation approach is expected to be a practical alternative to current ones, which depend on the use of noble metal catalysts.

SULFUR-RESISTANT BIMETALLIC NOBLE METAL CATALYSTS FOR AROMATIC HYDROGENATION OF DIESEL FUEL

Y zeolite supporting noble metal catalysts, as the important industrial catalysts for aromatics hydrogenation, have received increasing attention in recent years. Pd M/Y bimetallic catalysts, where M is non noble metal element, were prepared to investigate the effects of the addition of a second metal. Pd M/Y catalysts were evaluated under the following conditions: H 2 pressure 4.2 MPa, MHSV 4.0 h -1 , sulfur content in feed 3000 μg/g. The microreactor results indicated that the second metal remarkably affects the hydrogenation activity of Pd/Y catalysts. Among them, Cr and W improve the sulfur resistance of Pd/Y, but La, Mn, Mo and Ag make the sulfur resistance worse and the second metals have no evident influence on product selectivity and acidic properties of the catalysts.

Preparation of Spherical MgCl_2/SiO_2/THF-Supported Late-Transition Metal Catalysts for Ethylene Polymerization

A facile and user friendly technique to immobilize the late-transition metal complexes on spherical MgCl2/SiO2/THF support has been developed. The spherical MgCl2/SiO2/THF-supported late-transition metal catalysts 2,6-bis-[1-(2,6-dimethylphenylimino)ethyl]pyridine iron(II) dichloride(SC-A) and 1,4-bis(2,6-dimethylphenyl)- acenaphthene diimine nickel(II) dibromide(SC-B) for ethylene polymerization has been prepared by spray-drying technique using tetrahydrofuran suspension containing MgCl2, SiO2 and late-transition metal complexes. The catalysts were characterized by BET, XRD, SEM and the polymers were analyzed using GPC, DSC and 13C-NMR. The test results show that spray-drying is a very effective method for immobilizing late-transition metal catalysts for ethylene polymerization. Among six kinds of cocatalysts for olefin polymerization, TMA and TEA were confirmed to be more effective than other compounds for the ethylene polymerization system using the catalyst SC-A. For the case of the catalyst SC-B, DEAC showed the best performance as cocatalysts in ethylene polymerization. The replication of the catalyst morphology was found in the resultant polyethylene.

Research on K-V-rare Earth Metal Catalysts for Diesel Soot Oxidation

Five types of KNO_3-NH_4VO_3-rare earth metal nitrate（K-V-rare earth metal） catalysts supported on a-porous alumina ceramic substrates were prepared by a coating method. All the catalysts were characterized by X-ray diffraction and thermogravimetry/differential scanning calorimetry. Catalytic activities were evaluated by a soot oxidation reaction using a temperature-programmed reaction system. The experimental results show that the addition of rare earth metal compound could obviously improve the catalytic activities of the K-V-based catalysts. The proper ratio of K-V-rare earth metal catalysts can not only lower the soot onset ignition temperature, but also quicken the soot oxidation rate. The crystalline phases formed by K, V, and rare earth metal are stable.

High-molecular-weight Polyethylene Prepared with Early Transition Metal Catalysts

Early transition metal catalysts [N,N]MCln, in which [N,N] is N-（2,6-diisopropylphenyl） pyridine-2-carboxaldimine （C18H22N2, NN-1）, N-（2,6-diisopropylphenyl）-6-methylpyridine-2- carboxaldimine （C19H24N2, NN-2）, N-（2,4,6-trimethylphenyl）pyridine-2-carboxaldimine （CIsH16N2, NN-3）, M is Ti, Zr and V, and n is 3 or 4, e.g. [NN-1]TiCh 1a, [NN-1]ZrCh 1b, [NN-1]VC13 1c, [NN-2]TiCh 2a, [NN-2]ZrCh 2b, [NN-2]VC13 2e, [NN-3]TiCh 3a have been investigated to catalyze ethylene polymerization in the presence of methylaluminoxane （MAO）. It was noteworthy that polyethylene characteristic of high molecular weight and wide or bimodal molecular weight distribution was formed with moderate to high activities.

Advances of graphdiyne-supported metal catalysts in thermocatalytic reactions

Supported metal catalysts are widely used in the modern chemical industry.The electronic interaction between supports and active components is of great significance for heterogeneous catalysis.Graphdiyne(GDY),a new type of carbon allotrope with sp-hybridized carbon atoms,πconjugate structure,and electron transmission capability,is a promising candidate as catalyst support.Recent years have witnessed the rapid progress of GDY-supported metal catalysts for different catalysis reactions.Considering that most processes in the current chemical industry are thermocatalytic reactions,we herein give an overview about the advances and particular characteristics of GDY-supported catalysts in these reactions.The geometric structure and electronic properties of GDY are first introduced.Then,the synthesis methods for GDY-supported metal catalysts and their applications in thermocatalytic reactions are discussed,in which the effect of electronic interaction on catalytic performance is highlighted.Finally,the current challenges and future directions of GDY-supported metal catalysts for thermocatalysis are proposed.It is expected that this review will enrich our understanding of the advances of GDY as a superior support for metal catalysts in thermocatalytic reactions.

The effect of the carbon components on the performance of carbonbased transition metal electrocatalysts for the hydrogen evolution reaction

The hydrogen evolution reaction(HER)is a promising way to produce hydrogen,and the use of non-precious metals with an excellent electrochemical performance is vital for this.Carbon-based transition metal catalysts have high activity and stability,which are important in reducing the cost of hydrogen production and promoting the development of the hydrogen production industry.However,there is a lack of discussion regarding the effect of carbon components on the performance of these electrocatalysts.This review of the literature discusses the choice of the carbon components in these catalysts and their impact on catalytic performance,including electronic structure control by heteroatom doping,morphology adjustment,and the influence of self-supporting materials.It not only analyzes the progress in HER,but also provides guidance for synthesizing high-performance carbon-based transition metal catalysts.

Recent process in developing advanced heterogeneous diatomic-site metal catalysts for electrochemical CO_(2)reduction

Diatomic-site catalysts(DASCs)have emerged as a kind of promising heterogeneous candidate catalysts for electrochemical CO_(2)reduction(ECR),which is considered to retain the advantage of single-atom catalysts(SACs)but also introduce opportunities to exceed the limit of single-atom catalysts.In the past few years,tremendous progress has been achieved in this field.Herein,the recent progress in ECR on DASCs has been summarized.It will start with the classification of DASCs.Then the challenges in the precise fabrication and characterization of DASCs have been emphasized.By introducing the advanced ECR performance on DASCs,superior to that on SACs,the synergistic effects of the dual metal atoms are highlighted,as this origin of the advanced ECR performance on DASCs is comprehensively summarized.Finally,the major challenges and perspectives of DASCs have been proposed to shed light on the development of DASCs for ECR application.

A Review on Engineering Transition Metal Compound Catalysts to Accelerate the Redox Kinetics of Sulfur Cathodes for Lithium–Sulfur Batteries

Engineering transition metal compounds(TMCs)catalysts with excellent adsorption-catalytic ability has been one of the most effec-tive strategies to accelerate the redox kinetics of sulfur cathodes.Herein,this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping,bimetallic/bi-anionic TMCs,and TMCs-based heterostructure composites.It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band,d/p-band center,electron filling,and valence state.Moreover,the elec-tronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity,electron filling,and ion radius,resulting in electron redistribution,bonds reconstruction,induced vacancies due to the electronic interaction and changed crystal structure such as lat-tice spacing and lattice distortion.Different from the aforementioned two strategies,heterostructures are constructed by two types of TMCs with different Fermi energy levels,which causes built-in electric field and electrons transfer through the interface,and induces electron redistribution and arranged local atoms to regulate the electronic structure.Additionally,the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out.It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.

Nested Metal Catalysts:Metal Atoms and Clusters Stabilized by Confinement with Accessibility on Supports

Supported catalysts that are important in technology prominently include atomically dispersed metals and metal clusters.When the metals are noble,they are typically unstablesusceptible to sinteringespecially under reducing conditions.Embedding the metals in supports such as organic polymers,metal oxides,and zeolites confers stability on the metals but at the cost of catalytic activity associated with the lack of accessibility of metal bonding sites to reactants.An approach to stabilizing noble metal catalysts while maintaining their accessibility involves anchoring them in molecular-scale nests that are in or on supports.The nests include zeolite pore mouths,zeolite surface cups(half-cages),raft-like islands of oxophilic metals bonded to metal oxide supports,clusters of non-noble metals(e.g.,hosting noble metals as single-atom alloys),and nanoscale metal oxide islands that selectively bond to the catalytic metals,isolating them from the support.These examples illustrate a trend toward precision in the synthesis of solid catalysts,and the latter two classes of nested catalysts offer realistic prospects for economical large-scale application.

Exploration of the oxygen transport behavior in non-precious metal catalyst-based cathode catalyst layer for proton exchange membrane fuel cells

High cost has undoubtedly become the biggest obstacle to the commercialization of proton exchange membrane fuel cells(PEMFCs),in which Pt-based catalysts employed in the cathodic catalyst layer(CCL)account for the major portion of the cost.Although nonprecious metal catalysts(NPMCs)show appreciable activity and stability in the oxygen reduction reaction(ORR),the performance of fuel cells based on NPMCs remains unsatisfactory compared to those using Pt-based CCL.Therefore,most studies on NPMC-based fuel cells focus on developing highly active catalysts rather than facilitating oxygen transport.In this work,the oxygen transport behavior in CCLs based on highly active Fe-N-C catalysts is comprehensively explored through the elaborate design of two types of membrane electrode structures,one containing low-Pt-based CCL and NPMCbased dummy catalyst layer(DCL)and the other containing only the NPMC-based CCL.Using Zn-N-C based DCLs of different thickness,the bulk oxygen transport resistance at the unit thickness in NPMC-based CCL was quantified via the limiting current method combined with linear fitting analysis.Then,the local and bulk resistances in NPMC-based CCLs were quantified via the limiting current method and scanning electron microscopy,respectively.Results show that the ratios of local and bulk oxygen transport resistances in NPMCbased CCL are 80%and 20%,respectively,and that an enhancement of local oxygen transport is critical to greatly improve the performance of NPMC-based PEMFCs.Furthermore,the activity of active sites per unit in NPMCbased CCLs was determined to be lower than that in the Pt-based CCL,thus explaining worse cell performance of NPMC-based membrane electrode assemblys(MEAs).It is believed that the development of NPMC-based PEMFCs should proceed not only through the design of catalysts with higher activity but also through the improvement of oxygen transport in the CCL.

Progress in electrocatalytic nitrate reduction for green energy:Catalyst engineering,mechanisms,and techno-economic feasibility

Ammonia(NH_(3))is an irreplaceable chemical that has been widely demanded to keep the sustainable development of modern society.However,its industrial production consumes a huge amount of energy and releases extraordinary greenhouse gases(GHGs),leading to various environmental issues.Achieving the green production of ammonia is a great challenge,which has been extensively pursued in the last decade.In this review,the most promising strategy,electrochemical nitrate reduction reaction(e-NO_(3)RR),is comprehensively investigated to give a complete understanding of its development and mechanism and provide guidance for future directions.However,owing to the complex reactions and limited selectivity,a comprehensive understanding of the mechanisms is crucial to further development and commercialization.Moreover,NO_(3)^(-)RR is a promising strategy for simultaneous water treatment and NH_(3)production.A detailed overview of the recent progress in NO_(3)^(-)RR for NH_(3)production with nontransition and transition metal based electrocatalysts is summarized.In addition,critical advanced techniques,future challenges,and prospects are discussed to guide future research on transition metal-based catalysts for commercial NH_(3)synthesis by NO_(3)^(-)reduction.

The role of morphology on the electrochemical CO_(2) reduction performance of transition metal-based catalysts

The continued increase in population and the industrial revolution have led to an increase in atmospheric carbon dioxide(CO_(2)) concentration. Consequently, developing and implementing effective solutions to reduce CO_(2) emissions is a global priority. The electrochemical CO_(2) reduction reaction(CO_(2)RR) is strongly believed to be a promising alternative to fossil fuel-based technologies for the production of value-added chemicals. So far, the implementation of CO_(2)RR is hindered by associated electrochemical reactions, such as low selectivity, hydrogen evolution reaction(HER), and additional overpotential induced in some cases. As a result, it is necessary to conduct a timely evaluation of the state-of-the-art strategies in CO_(2)RR, with a focus on the engineering of the electrocatalytic systems. Catalyst morphology is one factor that plays a critical role in overcoming these drawbacks and significantly contributes to enhancing product selectivity and Faradaic efficiency(FE). This review article summarizes the recent advances in the rational design of electrocatalysts with various morphologies and the influence of these morphologies on CO_(2)RR. To compare literature findings in a meaningful way, the article focuses on results reported under a well-defined period and considers the first three rows of the d-block metal catalysts. The discussion typically covers the design of nanostructured catalysts and the molecular-level understanding of morphology-performance relationship in terms of activity, selectivity, and stability during CO_(2) electrolysis. Among others, it would be convenient to recommend a comprehensive discussion on the morphologies of single metals and heterostructures, with a detailed emphasis on their impact on CO_(2) conversion.